All of lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Horman <horms@verge.net.au>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 01/03] ARM: shmobile: Initial r7s72100 SoC support
Date: Thu, 03 Oct 2013 04:10:20 +0000	[thread overview]
Message-ID: <20131003041018.GC7925@verge.net.au> (raw)
In-Reply-To: <20130918201111.6319.33340.sendpatchset@w520>

On Thu, Sep 19, 2013 at 05:11:11AM +0900, Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
> 
> Add initial support for the r7272100 SoC including:
>  - Single Cortex-A9 CPU Core
>  - GIC
> 
> No static virtual mappings are used, all the components
> make use of ioremap(). DT_MACHINE_START is still wrapped
> in CONFIG_USE_OF to match other mach-shmobile code.
> 
> Signed-off-by: Magnus Damm <damm@opensource.se>
> ---
> 
>  arch/arm/boot/dts/r7s72100.dtsi                |   36 ++++

In future please consider adding the DTSI file in a separate patch.

>  arch/arm/mach-shmobile/Kconfig                 |    6 
>  arch/arm/mach-shmobile/Makefile                |    2 
>  arch/arm/mach-shmobile/clock-r7s72100.c        |  194 ++++++++++++++++++++++++
>  arch/arm/mach-shmobile/include/mach/r7s72100.h |    7 
>  arch/arm/mach-shmobile/setup-r7s72100.c        |   43 +++++
>  6 files changed, 288 insertions(+)

Thanks, I have queued this up in the soc3 branch.
It should make it into v3.13 but if not I'll rename the branch
soc after rebasing it on v3.13-rcX which will then be targeted at v3.14.

There was some fuzz when applying the Makefile portion of the patch.
I have queued up the following, please check that it is correct.

From: Magnus Damm <damm@opensource.se>

ARM: shmobile: Initial r7s72100 SoC support

Add initial support for the r7272100 SoC including:
 - Single Cortex-A9 CPU Core
 - GIC

No static virtual mappings are used, all the components
make use of ioremap(). DT_MACHINE_START is still wrapped
in CONFIG_USE_OF to match other mach-shmobile code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi                |  36 +++++
 arch/arm/mach-shmobile/Kconfig                 |   6 +
 arch/arm/mach-shmobile/Makefile                |   2 +
 arch/arm/mach-shmobile/clock-r7s72100.c        | 194 +++++++++++++++++++++++++
 arch/arm/mach-shmobile/include/mach/r7s72100.h |   7 +
 arch/arm/mach-shmobile/setup-r7s72100.c        |  43 ++++++
 6 files changed, 288 insertions(+)
 create mode 100644 arch/arm/boot/dts/r7s72100.dtsi
 create mode 100644 arch/arm/mach-shmobile/clock-r7s72100.c
 create mode 100644 arch/arm/mach-shmobile/include/mach/r7s72100.h
 create mode 100644 arch/arm/mach-shmobile/setup-r7s72100.c

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
new file mode 100644
index 0000000..46b82aa
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -0,0 +1,36 @@
+/*
+ * Device Tree Source for the r7s72100 SoC
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	compatible = "renesas,r7s72100";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller@e8201000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0xe8201000 0x1000>,
+			<0xe8202000 0x1000>;
+	};
+};
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index b452405..5dd5f9f 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -113,6 +113,12 @@ config ARCH_EMEV2
 	select ARM_GIC
 	select CPU_V7
 
+config ARCH_R7S72100
+	bool "RZ/A1H (R7S72100)"
+	select ARM_GIC
+	select CPU_V7
+	select SH_CLK_CPG
+
 comment "SH-Mobile Board Type"
 
 config MACH_APE6EVM
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 3c37e82..95e48d1 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o
 obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o setup-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7791)	+= setup-r8a7791.o setup-rcar-gen2.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
+obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
 
 # Clock objects
 ifndef CONFIG_COMMON_CLK
@@ -31,6 +32,7 @@ obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= clock-r8a7790.o
 obj-$(CONFIG_ARCH_R8A7791)	+= clock-r8a7791.o
 obj-$(CONFIG_ARCH_EMEV2)	+= clock-emev2.o
+obj-$(CONFIG_ARCH_R7S72100)	+= clock-r7s72100.o
 endif
 
 # SMP objects
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
new file mode 100644
index 0000000..1e71094
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -0,0 +1,194 @@
+/*
+ * r7a72100 clock framework support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2012  Phil Edworthy
+ * Copyright (C) 2011  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+#include <mach/r7s72100.h>
+
+/* registers */
+#define FRQCR		0xfcfe0010
+#define FRQCR2		0xfcfe0014
+#define STBCR3		0xfcfe0420
+#define STBCR4		0xfcfe0424
+
+#define PLL_RATE 30
+
+static struct clk_mapping cpg_mapping = {
+	.phys	= 0xfcfe0000,
+	.len	= 0x1000,
+};
+
+/* Fixed 32 KHz root clock for RTC */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 13330000,
+	.mapping	= &cpg_mapping,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	return clk->parent->rate * PLL_RATE;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long bus_recalc(struct clk *clk)
+{
+	return clk->parent->rate * 2 / 3;
+}
+
+static struct sh_clk_ops bus_clk_ops = {
+	.recalc		= bus_recalc,
+};
+
+static struct clk bus_clk = {
+	.ops		= &bus_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral0_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 12;
+}
+
+static struct sh_clk_ops peripheral0_clk_ops = {
+	.recalc		= peripheral0_recalc,
+};
+
+static struct clk peripheral0_clk = {
+	.ops		= &peripheral0_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral1_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 6;
+}
+
+static struct sh_clk_ops peripheral1_clk_ops = {
+	.recalc		= peripheral1_recalc,
+};
+
+static struct clk peripheral1_clk = {
+	.ops		= &peripheral1_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&pll_clk,
+	&bus_clk,
+	&peripheral0_clk,
+	&peripheral1_clk,
+};
+
+static int div2[] = { 1, 3, 0, 3 }; /* 1, 2/3, reserve, 1/3 */
+static int multipliers[] = { 1, 2, 1, 1 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I,
+	DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+	SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+/* The mask field specifies the div2 entries that are valid */
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I]  = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
+					| CLK_ENABLE_ON_INIT),
+};
+
+enum { MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
+	MSTP33,	MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
+	[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
+	[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
+	[MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
+	[MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
+	[MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
+	[MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
+	[MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
+	[MSTP33] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 3, 0), /* MTU2 */
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+	CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+
+	/* MSTP clocks */
+};
+
+void __init r7s72100_clock_init(void)
+{
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	if (!ret)
+		shmobile_clk_init();
+	else
+		panic("failed to setup rza1 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/include/mach/r7s72100.h
new file mode 100644
index 0000000..f78062e
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r7s72100.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_R7S72100_H__
+#define __ASM_R7S72100_H__
+
+void r7s72100_clock_init(void);
+void r7s72100_init_early(void);
+
+#endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
new file mode 100644
index 0000000..c1aded0
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -0,0 +1,43 @@
+/*
+ * r7s72100 processor support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <mach/common.h>
+#include <mach/r7s72100.h>
+#include <asm/mach/arch.h>
+
+void __init r7s72100_init_early(void)
+{
+	shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */
+}
+
+#ifdef CONFIG_USE_OF
+static const char *r7s72100_boards_compat_dt[] __initdata = {
+	"renesas,r7s72100",
+	NULL,
+};
+
+DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
+	.init_early	= r7s72100_init_early,
+	.dt_compat	= r7s72100_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
-- 
1.8.4


WARNING: multiple messages have this Message-ID (diff)
From: horms@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/03] ARM: shmobile: Initial r7s72100 SoC support
Date: Thu, 3 Oct 2013 13:10:20 +0900	[thread overview]
Message-ID: <20131003041018.GC7925@verge.net.au> (raw)
In-Reply-To: <20130918201111.6319.33340.sendpatchset@w520>

On Thu, Sep 19, 2013 at 05:11:11AM +0900, Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
> 
> Add initial support for the r7272100 SoC including:
>  - Single Cortex-A9 CPU Core
>  - GIC
> 
> No static virtual mappings are used, all the components
> make use of ioremap(). DT_MACHINE_START is still wrapped
> in CONFIG_USE_OF to match other mach-shmobile code.
> 
> Signed-off-by: Magnus Damm <damm@opensource.se>
> ---
> 
>  arch/arm/boot/dts/r7s72100.dtsi                |   36 ++++

In future please consider adding the DTSI file in a separate patch.

>  arch/arm/mach-shmobile/Kconfig                 |    6 
>  arch/arm/mach-shmobile/Makefile                |    2 
>  arch/arm/mach-shmobile/clock-r7s72100.c        |  194 ++++++++++++++++++++++++
>  arch/arm/mach-shmobile/include/mach/r7s72100.h |    7 
>  arch/arm/mach-shmobile/setup-r7s72100.c        |   43 +++++
>  6 files changed, 288 insertions(+)

Thanks, I have queued this up in the soc3 branch.
It should make it into v3.13 but if not I'll rename the branch
soc after rebasing it on v3.13-rcX which will then be targeted at v3.14.

There was some fuzz when applying the Makefile portion of the patch.
I have queued up the following, please check that it is correct.

From: Magnus Damm <damm@opensource.se>

ARM: shmobile: Initial r7s72100 SoC support

Add initial support for the r7272100 SoC including:
 - Single Cortex-A9 CPU Core
 - GIC

No static virtual mappings are used, all the components
make use of ioremap(). DT_MACHINE_START is still wrapped
in CONFIG_USE_OF to match other mach-shmobile code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi                |  36 +++++
 arch/arm/mach-shmobile/Kconfig                 |   6 +
 arch/arm/mach-shmobile/Makefile                |   2 +
 arch/arm/mach-shmobile/clock-r7s72100.c        | 194 +++++++++++++++++++++++++
 arch/arm/mach-shmobile/include/mach/r7s72100.h |   7 +
 arch/arm/mach-shmobile/setup-r7s72100.c        |  43 ++++++
 6 files changed, 288 insertions(+)
 create mode 100644 arch/arm/boot/dts/r7s72100.dtsi
 create mode 100644 arch/arm/mach-shmobile/clock-r7s72100.c
 create mode 100644 arch/arm/mach-shmobile/include/mach/r7s72100.h
 create mode 100644 arch/arm/mach-shmobile/setup-r7s72100.c

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
new file mode 100644
index 0000000..46b82aa
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -0,0 +1,36 @@
+/*
+ * Device Tree Source for the r7s72100 SoC
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	compatible = "renesas,r7s72100";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller at e8201000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0xe8201000 0x1000>,
+			<0xe8202000 0x1000>;
+	};
+};
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index b452405..5dd5f9f 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -113,6 +113,12 @@ config ARCH_EMEV2
 	select ARM_GIC
 	select CPU_V7
 
+config ARCH_R7S72100
+	bool "RZ/A1H (R7S72100)"
+	select ARM_GIC
+	select CPU_V7
+	select SH_CLK_CPG
+
 comment "SH-Mobile Board Type"
 
 config MACH_APE6EVM
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 3c37e82..95e48d1 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o
 obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o setup-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7791)	+= setup-r8a7791.o setup-rcar-gen2.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
+obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
 
 # Clock objects
 ifndef CONFIG_COMMON_CLK
@@ -31,6 +32,7 @@ obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= clock-r8a7790.o
 obj-$(CONFIG_ARCH_R8A7791)	+= clock-r8a7791.o
 obj-$(CONFIG_ARCH_EMEV2)	+= clock-emev2.o
+obj-$(CONFIG_ARCH_R7S72100)	+= clock-r7s72100.o
 endif
 
 # SMP objects
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
new file mode 100644
index 0000000..1e71094
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -0,0 +1,194 @@
+/*
+ * r7a72100 clock framework support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2012  Phil Edworthy
+ * Copyright (C) 2011  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+#include <mach/r7s72100.h>
+
+/* registers */
+#define FRQCR		0xfcfe0010
+#define FRQCR2		0xfcfe0014
+#define STBCR3		0xfcfe0420
+#define STBCR4		0xfcfe0424
+
+#define PLL_RATE 30
+
+static struct clk_mapping cpg_mapping = {
+	.phys	= 0xfcfe0000,
+	.len	= 0x1000,
+};
+
+/* Fixed 32 KHz root clock for RTC */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 13330000,
+	.mapping	= &cpg_mapping,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	return clk->parent->rate * PLL_RATE;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long bus_recalc(struct clk *clk)
+{
+	return clk->parent->rate * 2 / 3;
+}
+
+static struct sh_clk_ops bus_clk_ops = {
+	.recalc		= bus_recalc,
+};
+
+static struct clk bus_clk = {
+	.ops		= &bus_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral0_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 12;
+}
+
+static struct sh_clk_ops peripheral0_clk_ops = {
+	.recalc		= peripheral0_recalc,
+};
+
+static struct clk peripheral0_clk = {
+	.ops		= &peripheral0_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral1_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 6;
+}
+
+static struct sh_clk_ops peripheral1_clk_ops = {
+	.recalc		= peripheral1_recalc,
+};
+
+static struct clk peripheral1_clk = {
+	.ops		= &peripheral1_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&pll_clk,
+	&bus_clk,
+	&peripheral0_clk,
+	&peripheral1_clk,
+};
+
+static int div2[] = { 1, 3, 0, 3 }; /* 1, 2/3, reserve, 1/3 */
+static int multipliers[] = { 1, 2, 1, 1 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I,
+	DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+	SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+/* The mask field specifies the div2 entries that are valid */
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I]  = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
+					| CLK_ENABLE_ON_INIT),
+};
+
+enum { MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
+	MSTP33,	MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
+	[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
+	[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
+	[MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
+	[MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
+	[MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
+	[MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
+	[MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
+	[MSTP33] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 3, 0), /* MTU2 */
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+	CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+
+	/* MSTP clocks */
+};
+
+void __init r7s72100_clock_init(void)
+{
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	if (!ret)
+		shmobile_clk_init();
+	else
+		panic("failed to setup rza1 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/include/mach/r7s72100.h
new file mode 100644
index 0000000..f78062e
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r7s72100.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_R7S72100_H__
+#define __ASM_R7S72100_H__
+
+void r7s72100_clock_init(void);
+void r7s72100_init_early(void);
+
+#endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
new file mode 100644
index 0000000..c1aded0
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -0,0 +1,43 @@
+/*
+ * r7s72100 processor support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <mach/common.h>
+#include <mach/r7s72100.h>
+#include <asm/mach/arch.h>
+
+void __init r7s72100_init_early(void)
+{
+	shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */
+}
+
+#ifdef CONFIG_USE_OF
+static const char *r7s72100_boards_compat_dt[] __initdata = {
+	"renesas,r7s72100",
+	NULL,
+};
+
+DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
+	.init_early	= r7s72100_init_early,
+	.dt_compat	= r7s72100_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
-- 
1.8.4

  reply	other threads:[~2013-10-03  4:10 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-18 20:11 [PATCH 00/03] ARM: shmobile: Initial r7s72100 SoC and Genmai board support Magnus Damm
2013-09-18 20:11 ` Magnus Damm
2013-09-18 20:11 ` [PATCH 01/03] ARM: shmobile: Initial r7s72100 SoC support Magnus Damm
2013-09-18 20:11   ` Magnus Damm
2013-10-03  4:10   ` Simon Horman [this message]
2013-10-03  4:10     ` Simon Horman
2013-09-18 20:11 ` [PATCH 02/03] ARM: shmobile: r7s72100 SCIF support Magnus Damm
2013-09-18 20:11   ` Magnus Damm
2013-10-03  4:11   ` Simon Horman
2013-10-03  4:11     ` Simon Horman
2013-09-18 20:11 ` [PATCH 03/03] ARM: shmobile: Genmai support Magnus Damm
2013-09-18 20:11   ` Magnus Damm
2013-10-03  4:19   ` Simon Horman
2013-10-03  4:19     ` Simon Horman
2013-09-25  4:39 ` [PATCH 00/03] ARM: shmobile: Initial r7s72100 SoC and Genmai board support Simon Horman
2013-09-25  4:39   ` Simon Horman
2013-10-02  6:07   ` Magnus Damm
2013-10-02  6:07     ` Magnus Damm
2013-10-02  8:02     ` Simon Horman
2013-10-02  8:02       ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131003041018.GC7925@verge.net.au \
    --to=horms@verge.net.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.