From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: Dave Chinner <david@fromorbit.com>
Cc: Dave Jones <davej@redhat.com>,
Linux Kernel <linux-kernel@vger.kernel.org>,
xfs@oss.sgi.com
Subject: Re: xfs lockdep trace after unlink
Date: Tue, 8 Oct 2013 14:54:39 -0700 [thread overview]
Message-ID: <20131008215439.GA5790@linux.vnet.ibm.com> (raw)
In-Reply-To: <20131008213742.GB4446@dastard>
On Wed, Oct 09, 2013 at 08:37:42AM +1100, Dave Chinner wrote:
> On Tue, Oct 08, 2013 at 05:20:56PM -0400, Dave Jones wrote:
> > I was deleting a kernel tree, when this happened..
> > RCU, or xfs ?
> >
> > BUG: MAX_LOCKDEP_CHAINS too low!
>
> Or lockdep?
>
> > turning off the locking correctness validator.
> > Please attach the output of /proc/lock_stat to the bug report
> > CPU: 2 PID: 8109 Comm: rm Not tainted 3.12.0-rc4+ #96
> > ffffffff824bc2e0 ffff880026f416a8 ffffffff8172d798 41e619a2e5098827
> > ffff880026f41768 ffffffff810cc91f 0000000000000002 000010a02977b643
> > ffff880026f416d8 0000000000000212 ffff880026f416f8 ffffffff810c7329
> > Call Trace:
> > [<ffffffff8172d798>] dump_stack+0x4e/0x82
> > [<ffffffff810cc91f>] __lock_acquire+0x1b7f/0x1be0
> > [<ffffffff810c7329>] ? get_lock_stats+0x19/0x60
> > [<ffffffff810c7f5d>] ? lock_release_holdtime.part.29+0x9d/0x160
> > [<ffffffff810cd133>] lock_acquire+0x93/0x200
> > [<ffffffff81097d0a>] ? try_to_wake_up+0x22a/0x350
> > [<ffffffff817373c0>] _raw_spin_lock+0x40/0x80
> > [<ffffffff81097d0a>] ? try_to_wake_up+0x22a/0x350
> > [<ffffffff81097d0a>] try_to_wake_up+0x22a/0x350
> > [<ffffffff81097ea2>] default_wake_function+0x12/0x20
> > [<ffffffff81084c38>] autoremove_wake_function+0x18/0x40
> > [<ffffffff81090083>] ? __wake_up+0x23/0x50
> > [<ffffffff8108eb78>] __wake_up_common+0x58/0x90
> > [<ffffffff81090099>] __wake_up+0x39/0x50
> > [<ffffffff8110dc38>] rcu_report_qs_rsp+0x48/0x70
> > [<ffffffff8110f7d4>] rcu_report_unblock_qs_rnp+0x84/0x90
> > [<ffffffff81117fcf>] ? rcu_read_unlock_special+0x9f/0x4e0
> > [<ffffffff81118264>] rcu_read_unlock_special+0x334/0x4e0
> > [<ffffffff810c720f>] ? trace_hardirqs_off_caller+0x1f/0xc0
> > [<ffffffff8107f16c>] __rcu_read_unlock+0x8c/0x90
> > [<ffffffffa027084e>] xfs_perag_get+0xde/0x2a0 [xfs]
> > [<ffffffffa0270775>] ? xfs_perag_get+0x5/0x2a0 [xfs]
> > [<ffffffffa01f72f6>] _xfs_buf_find+0xd6/0x480 [xfs]
> > [<ffffffffa01f780a>] xfs_buf_get_map+0x2a/0x260 [xfs]
> > [<ffffffffa01f8fcc>] xfs_buf_read_map+0x2c/0x200 [xfs]
> > [<ffffffffa0281019>] xfs_trans_read_buf_map+0x4b9/0xa70 [xfs]
> > [<ffffffffa0245578>] xfs_da_read_buf+0xb8/0x340 [xfs]
> > [<ffffffff810ca84b>] ? mark_held_locks+0xbb/0x140
> > [<ffffffffa024a3b9>] xfs_dir3_block_read+0x39/0x80 [xfs]
> > [<ffffffffa024a440>] xfs_dir2_block_lookup_int+0x40/0x260 [xfs]
> > [<ffffffffa024b49d>] xfs_dir2_block_removename+0x3d/0x390 [xfs]
> > [<ffffffffa022d0da>] ? xfs_bmap_last_offset+0x4a/0xa0 [xfs]
> > [<ffffffffa024991c>] xfs_dir_removename+0x11c/0x180 [xfs]
> > [<ffffffffa0262085>] xfs_remove+0x2e5/0x510 [xfs]
> > [<ffffffffa020ab8b>] xfs_vn_unlink+0x4b/0x90 [xfs]
> > [<ffffffff811d4fd0>] vfs_unlink+0x90/0x100
> > [<ffffffff811d51bf>] do_unlinkat+0x17f/0x240
> > [<ffffffff81010b45>] ? syscall_trace_enter+0x145/0x2a0
> > [<ffffffff811d830b>] SyS_unlinkat+0x1b/0x40
> > [<ffffffff817408e4>] tracesys+0xdd/0xe2
>
> It's hard to see what in XFS is causing this. You're reading a
> single block directory, which means we're holding two inode locks
> here, and then we've done a lookup on a radix tree under
> rcu_read_lock(). Hence I can't see how we've overrun the lockdep
> chain depth in the XFS code path. FWIW, it's thrown this warning
> when calling rcu_read_unlock() here:
>
> struct xfs_perag *
> xfs_perag_get(
> struct xfs_mount *mp,
> xfs_agnumber_t agno)
> {
> struct xfs_perag *pag;
> int ref = 0;
>
> rcu_read_lock();
> pag = radix_tree_lookup(&mp->m_perag_tree, agno);
> if (pag) {
> ASSERT(atomic_read(&pag->pag_ref) >= 0);
> ref = atomic_inc_return(&pag->pag_ref);
> }
> >>>>>> rcu_read_unlock();
Would xfs be holding one of the scheduler's rq or pi locks at this
point? That could result in deadlock.
But I doubt that this is the problem, unless radix_tree_lookup() grabs
one and returns with it held. Otherwise, you have interrupts disabled
throughout the RCU read-side critical section, and thus are guaranteed
to take the lockless fastpath through rcu_read_unlock(). (As opposed
to merely having extremely high probability of taking that fastpath.)
Thanx, Paul
> trace_xfs_perag_get(mp, agno, ref, _RET_IP_);
> return pag;
> }
>
> So I'd be looking at RCU or lockdep at this point....
>
> Cheers,
>
> Dave.
> --
> Dave Chinner
> david@fromorbit.com
>
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
WARNING: multiple messages have this Message-ID (diff)
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: Dave Chinner <david@fromorbit.com>
Cc: Dave Jones <davej@redhat.com>,
Linux Kernel <linux-kernel@vger.kernel.org>,
xfs@oss.sgi.com
Subject: Re: xfs lockdep trace after unlink
Date: Tue, 8 Oct 2013 14:54:39 -0700 [thread overview]
Message-ID: <20131008215439.GA5790@linux.vnet.ibm.com> (raw)
In-Reply-To: <20131008213742.GB4446@dastard>
On Wed, Oct 09, 2013 at 08:37:42AM +1100, Dave Chinner wrote:
> On Tue, Oct 08, 2013 at 05:20:56PM -0400, Dave Jones wrote:
> > I was deleting a kernel tree, when this happened..
> > RCU, or xfs ?
> >
> > BUG: MAX_LOCKDEP_CHAINS too low!
>
> Or lockdep?
>
> > turning off the locking correctness validator.
> > Please attach the output of /proc/lock_stat to the bug report
> > CPU: 2 PID: 8109 Comm: rm Not tainted 3.12.0-rc4+ #96
> > ffffffff824bc2e0 ffff880026f416a8 ffffffff8172d798 41e619a2e5098827
> > ffff880026f41768 ffffffff810cc91f 0000000000000002 000010a02977b643
> > ffff880026f416d8 0000000000000212 ffff880026f416f8 ffffffff810c7329
> > Call Trace:
> > [<ffffffff8172d798>] dump_stack+0x4e/0x82
> > [<ffffffff810cc91f>] __lock_acquire+0x1b7f/0x1be0
> > [<ffffffff810c7329>] ? get_lock_stats+0x19/0x60
> > [<ffffffff810c7f5d>] ? lock_release_holdtime.part.29+0x9d/0x160
> > [<ffffffff810cd133>] lock_acquire+0x93/0x200
> > [<ffffffff81097d0a>] ? try_to_wake_up+0x22a/0x350
> > [<ffffffff817373c0>] _raw_spin_lock+0x40/0x80
> > [<ffffffff81097d0a>] ? try_to_wake_up+0x22a/0x350
> > [<ffffffff81097d0a>] try_to_wake_up+0x22a/0x350
> > [<ffffffff81097ea2>] default_wake_function+0x12/0x20
> > [<ffffffff81084c38>] autoremove_wake_function+0x18/0x40
> > [<ffffffff81090083>] ? __wake_up+0x23/0x50
> > [<ffffffff8108eb78>] __wake_up_common+0x58/0x90
> > [<ffffffff81090099>] __wake_up+0x39/0x50
> > [<ffffffff8110dc38>] rcu_report_qs_rsp+0x48/0x70
> > [<ffffffff8110f7d4>] rcu_report_unblock_qs_rnp+0x84/0x90
> > [<ffffffff81117fcf>] ? rcu_read_unlock_special+0x9f/0x4e0
> > [<ffffffff81118264>] rcu_read_unlock_special+0x334/0x4e0
> > [<ffffffff810c720f>] ? trace_hardirqs_off_caller+0x1f/0xc0
> > [<ffffffff8107f16c>] __rcu_read_unlock+0x8c/0x90
> > [<ffffffffa027084e>] xfs_perag_get+0xde/0x2a0 [xfs]
> > [<ffffffffa0270775>] ? xfs_perag_get+0x5/0x2a0 [xfs]
> > [<ffffffffa01f72f6>] _xfs_buf_find+0xd6/0x480 [xfs]
> > [<ffffffffa01f780a>] xfs_buf_get_map+0x2a/0x260 [xfs]
> > [<ffffffffa01f8fcc>] xfs_buf_read_map+0x2c/0x200 [xfs]
> > [<ffffffffa0281019>] xfs_trans_read_buf_map+0x4b9/0xa70 [xfs]
> > [<ffffffffa0245578>] xfs_da_read_buf+0xb8/0x340 [xfs]
> > [<ffffffff810ca84b>] ? mark_held_locks+0xbb/0x140
> > [<ffffffffa024a3b9>] xfs_dir3_block_read+0x39/0x80 [xfs]
> > [<ffffffffa024a440>] xfs_dir2_block_lookup_int+0x40/0x260 [xfs]
> > [<ffffffffa024b49d>] xfs_dir2_block_removename+0x3d/0x390 [xfs]
> > [<ffffffffa022d0da>] ? xfs_bmap_last_offset+0x4a/0xa0 [xfs]
> > [<ffffffffa024991c>] xfs_dir_removename+0x11c/0x180 [xfs]
> > [<ffffffffa0262085>] xfs_remove+0x2e5/0x510 [xfs]
> > [<ffffffffa020ab8b>] xfs_vn_unlink+0x4b/0x90 [xfs]
> > [<ffffffff811d4fd0>] vfs_unlink+0x90/0x100
> > [<ffffffff811d51bf>] do_unlinkat+0x17f/0x240
> > [<ffffffff81010b45>] ? syscall_trace_enter+0x145/0x2a0
> > [<ffffffff811d830b>] SyS_unlinkat+0x1b/0x40
> > [<ffffffff817408e4>] tracesys+0xdd/0xe2
>
> It's hard to see what in XFS is causing this. You're reading a
> single block directory, which means we're holding two inode locks
> here, and then we've done a lookup on a radix tree under
> rcu_read_lock(). Hence I can't see how we've overrun the lockdep
> chain depth in the XFS code path. FWIW, it's thrown this warning
> when calling rcu_read_unlock() here:
>
> struct xfs_perag *
> xfs_perag_get(
> struct xfs_mount *mp,
> xfs_agnumber_t agno)
> {
> struct xfs_perag *pag;
> int ref = 0;
>
> rcu_read_lock();
> pag = radix_tree_lookup(&mp->m_perag_tree, agno);
> if (pag) {
> ASSERT(atomic_read(&pag->pag_ref) >= 0);
> ref = atomic_inc_return(&pag->pag_ref);
> }
> >>>>>> rcu_read_unlock();
Would xfs be holding one of the scheduler's rq or pi locks at this
point? That could result in deadlock.
But I doubt that this is the problem, unless radix_tree_lookup() grabs
one and returns with it held. Otherwise, you have interrupts disabled
throughout the RCU read-side critical section, and thus are guaranteed
to take the lockless fastpath through rcu_read_unlock(). (As opposed
to merely having extremely high probability of taking that fastpath.)
Thanx, Paul
> trace_xfs_perag_get(mp, agno, ref, _RET_IP_);
> return pag;
> }
>
> So I'd be looking at RCU or lockdep at this point....
>
> Cheers,
>
> Dave.
> --
> Dave Chinner
> david@fromorbit.com
>
next prev parent reply other threads:[~2013-10-08 21:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-08 21:20 xfs lockdep trace after unlink Dave Jones
2013-10-08 21:20 ` Dave Jones
2013-10-08 21:37 ` Dave Chinner
2013-10-08 21:37 ` Dave Chinner
2013-10-08 21:54 ` Paul E. McKenney [this message]
2013-10-08 21:54 ` Paul E. McKenney
2013-10-08 22:25 ` Dave Chinner
2013-10-08 22:25 ` Dave Chinner
2013-10-08 23:01 ` Paul E. McKenney
2013-10-08 23:01 ` Paul E. McKenney
2013-10-08 21:39 ` Paul E. McKenney
2013-10-08 21:39 ` Paul E. McKenney
2013-10-08 21:59 ` Dave Jones
2013-10-08 21:59 ` Dave Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131008215439.GA5790@linux.vnet.ibm.com \
--to=paulmck@linux.vnet.ibm.com \
--cc=davej@redhat.com \
--cc=david@fromorbit.com \
--cc=linux-kernel@vger.kernel.org \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.