* [Buildroot] [pull request] Pull request for branch yem/misc
@ 2013-10-12 22:20 Yann E. MORIN
2013-10-12 22:20 ` [Buildroot] [PATCH 1/2] package/rpi-userland: install all of our .pc files the same way Yann E. MORIN
2013-10-12 22:20 ` [Buildroot] [PATCH 2/2] package/rpi-userland: expose appropriate EGL version Yann E. MORIN
0 siblings, 2 replies; 5+ messages in thread
From: Yann E. MORIN @ 2013-10-12 22:20 UTC (permalink / raw)
To: buildroot
From: "Yann E. MORIN" <yann.morin.1998@free.fr>
Hello All!
Here is a small series to clean up rpi-userland wrt .pc files.
Regards,
Yann E. MORIN.
The following changes since commit 9f7e8f120dfeddd8b49eb4d232253cc3f9ac8efa:
package/weston: add RPi compositor (2013-10-11 08:56:53 +0200)
are available in the git repository at:
git://gitorious.org/buildroot/buildroot.git yem/misc
for you to fetch changes up to 291be0994d2be580cc266c53b85f3d380b35ad3d:
package/rpi-userland: expose appropriate EGL version (2013-10-13 00:06:34 +0200)
----------------------------------------------------------------
Yann E. MORIN (2):
package/rpi-userland: install all of our .pc files the same way
package/rpi-userland: expose appropriate EGL version
.../rpi-userland-000-add-pkgconfig-files.patch | 34 ++++++++++++++++++++--
1 file changed, 31 insertions(+), 3 deletions(-)
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 5+ messages in thread* [Buildroot] [PATCH 1/2] package/rpi-userland: install all of our .pc files the same way
2013-10-12 22:20 [Buildroot] [pull request] Pull request for branch yem/misc Yann E. MORIN
@ 2013-10-12 22:20 ` Yann E. MORIN
2013-10-12 22:28 ` Yann E. MORIN
2013-10-12 22:20 ` [Buildroot] [PATCH 2/2] package/rpi-userland: expose appropriate EGL version Yann E. MORIN
1 sibling, 1 reply; 5+ messages in thread
From: Yann E. MORIN @ 2013-10-12 22:20 UTC (permalink / raw)
To: buildroot
From: "Yann E. MORIN" <yann.morin.1998@free.fr>
Install bcm_host the same way we install egl.pc and glesv2.pc, using
the cmake lists.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
.../rpi-userland-000-add-pkgconfig-files.patch | 32 ++++++++++++++++++++--
1 file changed, 30 insertions(+), 2 deletions(-)
diff --git a/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch b/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch
index 4ffc2b0..d7984ff 100644
--- a/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch
+++ b/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch
@@ -1,9 +1,10 @@
-Add .pc files for the OpenGLESv2 and EGL libraries
+Add .pc files for the OpenGLESv2, EGL and bcm_host libraries
Those pkg-config files make it easier for Qt5 to find those libraries
and the appropriate link flags.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Index: b/interface/khronos/egl/egl.pc.in
===================================================================
@@ -25,7 +26,7 @@ Index: b/interface/khronos/CMakeLists.txt
===================================================================
--- a/interface/khronos/CMakeLists.txt
+++ b/interface/khronos/CMakeLists.txt
-@@ -73,3 +73,11 @@
+@@ -74,3 +74,11 @@
install(TARGETS EGL GLESv2 OpenVG WFC khrn_client DESTINATION lib)
install(TARGETS EGL_static GLESv2_static khrn_static DESTINATION lib)
@@ -52,3 +53,30 @@ Index: b/interface/khronos/glxx/glesv2.pc.in
+Version: 2.0
+Libs: -L${libdir} -lGLESv2
+Cflags: -I${includedir}/
+Index: b/host_applications/linux/libs/bcm_host/CMakeLists.txt
+===================================================================
+--- a/host_applications/linux/libs/bcm_host/CMakeLists.txt
++++ b/host_applications/linux/libs/bcm_host/CMakeLists.txt
+@@ -20,3 +20,7 @@
+
+ install(TARGETS bcm_host DESTINATION lib)
+
++configure_file("${CMAKE_CURRENT_SOURCE_DIR}/bcm_host.pc.in"
++ "${CMAKE_CURRENT_BINARY_DIR}/bcm_host.pc" @ONLY)
++install(FILES "${CMAKE_CURRENT_BINARY_DIR}/bcm_host.pc"
++ DESTINATION "${CMAKE_INSTALL_PREFIX}/lib/pkgconfig")
+Index: b/host_applications/linux/libs/bcm_host/bcm_host.pc.in
+===================================================================
+--- /dev/null
++++ b/host_applications/linux/libs/bcm_host/bcm_host.pc.in
+@@ -0,0 +1,10 @@
++prefix=/usr
++exec_prefix=${prefix}
++libdir=${exec_prefix}/lib
++includedir=${prefix}/include
++
++Name: bcm_host
++Description: Broadcom VideoCore host API library
++Version: 1
++Libs: -L${libdir} -lbcm_host -lvcos -lvchiq_arm
++Cflags: -I${includedir} -I${includedir}/interface/vmcs_host/linux -I${includedir}/interface/vcos/pthreads -DUSE_VCHIQ_ARM
--
1.8.1.2
^ permalink raw reply related [flat|nested] 5+ messages in thread* [Buildroot] [PATCH 1/2] package/rpi-userland: install all of our .pc files the same way
2013-10-12 22:20 ` [Buildroot] [PATCH 1/2] package/rpi-userland: install all of our .pc files the same way Yann E. MORIN
@ 2013-10-12 22:28 ` Yann E. MORIN
0 siblings, 0 replies; 5+ messages in thread
From: Yann E. MORIN @ 2013-10-12 22:28 UTC (permalink / raw)
To: buildroot
All,
On 2013-10-13 00:20 +0200, Yann E. MORIN spake thusly:
> From: "Yann E. MORIN" <yann.morin.1998@free.fr>
>
> Install bcm_host the same way we install egl.pc and glesv2.pc, using
> the cmake lists.
No, no, no, I forgot to commit the rest of the changes for this cset.
Forget it...
Sorry for the noise... :-(
Regards,
Yann E. MORIN.
> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
> .../rpi-userland-000-add-pkgconfig-files.patch | 32 ++++++++++++++++++++--
> 1 file changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch b/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch
> index 4ffc2b0..d7984ff 100644
> --- a/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch
> +++ b/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch
> @@ -1,9 +1,10 @@
> -Add .pc files for the OpenGLESv2 and EGL libraries
> +Add .pc files for the OpenGLESv2, EGL and bcm_host libraries
>
> Those pkg-config files make it easier for Qt5 to find those libraries
> and the appropriate link flags.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> +Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
>
> Index: b/interface/khronos/egl/egl.pc.in
> ===================================================================
> @@ -25,7 +26,7 @@ Index: b/interface/khronos/CMakeLists.txt
> ===================================================================
> --- a/interface/khronos/CMakeLists.txt
> +++ b/interface/khronos/CMakeLists.txt
> -@@ -73,3 +73,11 @@
> +@@ -74,3 +74,11 @@
>
> install(TARGETS EGL GLESv2 OpenVG WFC khrn_client DESTINATION lib)
> install(TARGETS EGL_static GLESv2_static khrn_static DESTINATION lib)
> @@ -52,3 +53,30 @@ Index: b/interface/khronos/glxx/glesv2.pc.in
> +Version: 2.0
> +Libs: -L${libdir} -lGLESv2
> +Cflags: -I${includedir}/
> +Index: b/host_applications/linux/libs/bcm_host/CMakeLists.txt
> +===================================================================
> +--- a/host_applications/linux/libs/bcm_host/CMakeLists.txt
> ++++ b/host_applications/linux/libs/bcm_host/CMakeLists.txt
> +@@ -20,3 +20,7 @@
> +
> + install(TARGETS bcm_host DESTINATION lib)
> +
> ++configure_file("${CMAKE_CURRENT_SOURCE_DIR}/bcm_host.pc.in"
> ++ "${CMAKE_CURRENT_BINARY_DIR}/bcm_host.pc" @ONLY)
> ++install(FILES "${CMAKE_CURRENT_BINARY_DIR}/bcm_host.pc"
> ++ DESTINATION "${CMAKE_INSTALL_PREFIX}/lib/pkgconfig")
> +Index: b/host_applications/linux/libs/bcm_host/bcm_host.pc.in
> +===================================================================
> +--- /dev/null
> ++++ b/host_applications/linux/libs/bcm_host/bcm_host.pc.in
> +@@ -0,0 +1,10 @@
> ++prefix=/usr
> ++exec_prefix=${prefix}
> ++libdir=${exec_prefix}/lib
> ++includedir=${prefix}/include
> ++
> ++Name: bcm_host
> ++Description: Broadcom VideoCore host API library
> ++Version: 1
> ++Libs: -L${libdir} -lbcm_host -lvcos -lvchiq_arm
> ++Cflags: -I${includedir} -I${includedir}/interface/vmcs_host/linux -I${includedir}/interface/vcos/pthreads -DUSE_VCHIQ_ARM
> --
> 1.8.1.2
>
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH 2/2] package/rpi-userland: expose appropriate EGL version
2013-10-12 22:20 [Buildroot] [pull request] Pull request for branch yem/misc Yann E. MORIN
2013-10-12 22:20 ` [Buildroot] [PATCH 1/2] package/rpi-userland: install all of our .pc files the same way Yann E. MORIN
@ 2013-10-12 22:20 ` Yann E. MORIN
1 sibling, 0 replies; 5+ messages in thread
From: Yann E. MORIN @ 2013-10-12 22:20 UTC (permalink / raw)
To: buildroot
From: "Yann E. MORIN" <yann.morin.1998@free.fr>
The egl.pc file installed exposes version 1.0, while it really is a
much higher version.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
Note: version 1.0 causes build failures for weston, which fails at
./configure with this error message:
Package 'egl' has version '1.0', required version is '>= 7.10'
Do as the Collabora guys do, and expose version 10:
http://cgit.collabora.com/git/user/pq/android-pc-files.git/tree/pkgconfig/egl.pc?h=raspberrypi
---
package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch b/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch
index d7984ff..848e49d 100644
--- a/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch
+++ b/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch
@@ -18,7 +18,7 @@ Index: b/interface/khronos/egl/egl.pc.in
+
+Name: egl
+Description: RasberryPi implementation of EGL
-+Version: 1.0
++Version: 10
+Libs: -L${libdir} -lEGL -lGLESv2 -lbcm_host
+Cflags: -I${includedir}/ -I${includedir}/interface/vcos/pthreads/ \
+ -I${includedir}/interface/vmcs_host/linux/
--
1.8.1.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Buildroot] [pull request v2] Pull request for branch yem/misc
@ 2013-10-12 22:46 Yann E. MORIN
2013-10-12 22:46 ` [Buildroot] [PATCH 1/2] package/rpi-userland: install all of our .pc files the same way Yann E. MORIN
0 siblings, 1 reply; 5+ messages in thread
From: Yann E. MORIN @ 2013-10-12 22:46 UTC (permalink / raw)
To: buildroot
From: "Yann E. MORIN" <yann.morin.1998@free.fr>
Hello All!
Here is a small series to clean up rpi-userland wrt .pc files.
Regards,
Yann E. MORIN.
Changes v1 -> v2:
- remove bundled bcm_host.pc
The following changes since commit 9f7e8f120dfeddd8b49eb4d232253cc3f9ac8efa:
package/weston: add RPi compositor (2013-10-11 08:56:53 +0200)
are available in the git repository at:
git://gitorious.org/buildroot/buildroot.git yem/misc
for you to fetch changes up to 843868f55c7fddce02d5cd45525fe36bbbca5e76:
package/rpi-userland: expose appropriate EGL version (2013-10-13 00:30:40 +0200)
----------------------------------------------------------------
Yann E. MORIN (2):
package/rpi-userland: install all of our .pc files the same way
package/rpi-userland: expose appropriate EGL version
package/rpi-userland/bcm_host.pc | 11 -------
.../rpi-userland-000-add-pkgconfig-files.patch | 34 ++++++++++++++++++++--
package/rpi-userland/rpi-userland.mk | 6 ----
3 files changed, 31 insertions(+), 20 deletions(-)
delete mode 100644 package/rpi-userland/bcm_host.pc
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 5+ messages in thread* [Buildroot] [PATCH 1/2] package/rpi-userland: install all of our .pc files the same way
2013-10-12 22:46 [Buildroot] [pull request v2] Pull request for branch yem/misc Yann E. MORIN
@ 2013-10-12 22:46 ` Yann E. MORIN
0 siblings, 0 replies; 5+ messages in thread
From: Yann E. MORIN @ 2013-10-12 22:46 UTC (permalink / raw)
To: buildroot
From: "Yann E. MORIN" <yann.morin.1998@free.fr>
Install bcm_host the same way we install egl.pc and glesv2.pc, using
the cmake lists.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/rpi-userland/bcm_host.pc | 11 --------
.../rpi-userland-000-add-pkgconfig-files.patch | 32 ++++++++++++++++++++--
package/rpi-userland/rpi-userland.mk | 6 ----
3 files changed, 30 insertions(+), 19 deletions(-)
delete mode 100644 package/rpi-userland/bcm_host.pc
diff --git a/package/rpi-userland/bcm_host.pc b/package/rpi-userland/bcm_host.pc
deleted file mode 100644
index 28bbe96..0000000
--- a/package/rpi-userland/bcm_host.pc
+++ /dev/null
@@ -1,11 +0,0 @@
-prefix=/usr
-exec_prefix=${prefix}
-libdir=${exec_prefix}/lib
-includedir=${prefix}/include
-
-Name: bcm_host
-Description: Broadcom VideoCore host API library
-Version: 1
-Libs: -L${libdir} -lbcm_host -lvcos -lvchiq_arm
-Cflags: -I${includedir} -I${includedir}/interface/vmcs_host/linux -I${includedir}/interface/vcos/pthreads -DUSE_VCHIQ_ARM
-
diff --git a/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch b/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch
index 4ffc2b0..d7984ff 100644
--- a/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch
+++ b/package/rpi-userland/rpi-userland-000-add-pkgconfig-files.patch
@@ -1,9 +1,10 @@
-Add .pc files for the OpenGLESv2 and EGL libraries
+Add .pc files for the OpenGLESv2, EGL and bcm_host libraries
Those pkg-config files make it easier for Qt5 to find those libraries
and the appropriate link flags.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Index: b/interface/khronos/egl/egl.pc.in
===================================================================
@@ -25,7 +26,7 @@ Index: b/interface/khronos/CMakeLists.txt
===================================================================
--- a/interface/khronos/CMakeLists.txt
+++ b/interface/khronos/CMakeLists.txt
-@@ -73,3 +73,11 @@
+@@ -74,3 +74,11 @@
install(TARGETS EGL GLESv2 OpenVG WFC khrn_client DESTINATION lib)
install(TARGETS EGL_static GLESv2_static khrn_static DESTINATION lib)
@@ -52,3 +53,30 @@ Index: b/interface/khronos/glxx/glesv2.pc.in
+Version: 2.0
+Libs: -L${libdir} -lGLESv2
+Cflags: -I${includedir}/
+Index: b/host_applications/linux/libs/bcm_host/CMakeLists.txt
+===================================================================
+--- a/host_applications/linux/libs/bcm_host/CMakeLists.txt
++++ b/host_applications/linux/libs/bcm_host/CMakeLists.txt
+@@ -20,3 +20,7 @@
+
+ install(TARGETS bcm_host DESTINATION lib)
+
++configure_file("${CMAKE_CURRENT_SOURCE_DIR}/bcm_host.pc.in"
++ "${CMAKE_CURRENT_BINARY_DIR}/bcm_host.pc" @ONLY)
++install(FILES "${CMAKE_CURRENT_BINARY_DIR}/bcm_host.pc"
++ DESTINATION "${CMAKE_INSTALL_PREFIX}/lib/pkgconfig")
+Index: b/host_applications/linux/libs/bcm_host/bcm_host.pc.in
+===================================================================
+--- /dev/null
++++ b/host_applications/linux/libs/bcm_host/bcm_host.pc.in
+@@ -0,0 +1,10 @@
++prefix=/usr
++exec_prefix=${prefix}
++libdir=${exec_prefix}/lib
++includedir=${prefix}/include
++
++Name: bcm_host
++Description: Broadcom VideoCore host API library
++Version: 1
++Libs: -L${libdir} -lbcm_host -lvcos -lvchiq_arm
++Cflags: -I${includedir} -I${includedir}/interface/vmcs_host/linux -I${includedir}/interface/vcos/pthreads -DUSE_VCHIQ_ARM
diff --git a/package/rpi-userland/rpi-userland.mk b/package/rpi-userland/rpi-userland.mk
index cc032bf..8b5794f 100644
--- a/package/rpi-userland/rpi-userland.mk
+++ b/package/rpi-userland/rpi-userland.mk
@@ -16,10 +16,4 @@ define RPI_USERLAND_POST_TARGET_CLEANUP
endef
RPI_USERLAND_POST_INSTALL_TARGET_HOOKS += RPI_USERLAND_POST_TARGET_CLEANUP
-define RPI_USERLAND_POST_STAGING_PC_FILE
- install -D -m 0644 package/rpi-userland/bcm_host.pc \
- $(STAGING_DIR)/usr/lib/pkgconfig/bcm_host.pc
-endef
-RPI_USERLAND_POST_INSTALL_STAGING_HOOKS += RPI_USERLAND_POST_STAGING_PC_FILE
-
$(eval $(cmake-package))
--
1.8.1.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-10-12 22:46 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-12 22:20 [Buildroot] [pull request] Pull request for branch yem/misc Yann E. MORIN
2013-10-12 22:20 ` [Buildroot] [PATCH 1/2] package/rpi-userland: install all of our .pc files the same way Yann E. MORIN
2013-10-12 22:28 ` Yann E. MORIN
2013-10-12 22:20 ` [Buildroot] [PATCH 2/2] package/rpi-userland: expose appropriate EGL version Yann E. MORIN
-- strict thread matches above, loose matches on Subject: below --
2013-10-12 22:46 [Buildroot] [pull request v2] Pull request for branch yem/misc Yann E. MORIN
2013-10-12 22:46 ` [Buildroot] [PATCH 1/2] package/rpi-userland: install all of our .pc files the same way Yann E. MORIN
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.