* [PATCH] Bluetooth: ath3k: add support for 0930:021c
@ 2013-10-18 15:35 Robin Kreis
2013-10-18 16:53 ` Marcel Holtmann
0 siblings, 1 reply; 3+ messages in thread
From: Robin Kreis @ 2013-10-18 15:35 UTC (permalink / raw)
To: linux-bluetooth
This is needed for my Toshiba C850-1K0 (AR9462 chip) to discover any
Bluetooth devices.
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 0a327f4..23b813a 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -87,6 +87,7 @@ static struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0CF3, 0xE004) },
{ USB_DEVICE(0x0CF3, 0xE005) },
{ USB_DEVICE(0x0930, 0x0219) },
+ { USB_DEVICE(0x0930, 0x021c) },
{ USB_DEVICE(0x0489, 0xe057) },
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x0489, 0xe04e) },
@@ -129,6 +130,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index f3dfc0a..92fe3c00 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -154,6 +154,7 @@ static struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
--
1.8.4.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] Bluetooth: ath3k: add support for 0930:021c
2013-10-18 15:35 [PATCH] Bluetooth: ath3k: add support for 0930:021c Robin Kreis
@ 2013-10-18 16:53 ` Marcel Holtmann
2013-10-18 19:20 ` Robin Kreis
0 siblings, 1 reply; 3+ messages in thread
From: Marcel Holtmann @ 2013-10-18 16:53 UTC (permalink / raw)
To: Robin Kreis; +Cc: linux-bluetooth
Hi Robin,
> This is needed for my Toshiba C850-1K0 (AR9462 chip) to discover any
> Bluetooth devices.
as usual include the relevant parts from /sys/kernel/debug/usb/devices here.
>
> ---
> drivers/bluetooth/ath3k.c | 2 ++
> drivers/bluetooth/btusb.c | 1 +
> 2 files changed, 3 insertions(+)
>
> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
> index 0a327f4..23b813a 100644
> --- a/drivers/bluetooth/ath3k.c
> +++ b/drivers/bluetooth/ath3k.c
> @@ -87,6 +87,7 @@ static struct usb_device_id ath3k_table[] = {
> { USB_DEVICE(0x0CF3, 0xE004) },
> { USB_DEVICE(0x0CF3, 0xE005) },
> { USB_DEVICE(0x0930, 0x0219) },
> + { USB_DEVICE(0x0930, 0x021c) },
> { USB_DEVICE(0x0489, 0xe057) },
> { USB_DEVICE(0x13d3, 0x3393) },
> { USB_DEVICE(0x0489, 0xe04e) },
> @@ -129,6 +130,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
> { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
> + { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index f3dfc0a..92fe3c00 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -154,6 +154,7 @@ static struct usb_device_id blacklist_table[] = {
> { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
> + { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
Regards
Marcel
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] Bluetooth: ath3k: add support for 0930:021c
2013-10-18 16:53 ` Marcel Holtmann
@ 2013-10-18 19:20 ` Robin Kreis
0 siblings, 0 replies; 3+ messages in thread
From: Robin Kreis @ 2013-10-18 19:20 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: linux-bluetooth
Am Fri, 18 Oct 2013 18:53:25 +0200
schrieb Marcel Holtmann <marcel@holtmann.org>:
> Hi Robin,
Hi Marcel!
> as usual include the relevant parts
> from /sys/kernel/debug/usb/devices here.
There you go:
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.11
S: Manufacturer=Linux 3.11.5-1-ARCH xhci_hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0930 ProdID=021c Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
This is with patched ath3k and btusb modules (and working Bluetooth).
Best regards,
Robin
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-10-18 19:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-18 15:35 [PATCH] Bluetooth: ath3k: add support for 0930:021c Robin Kreis
2013-10-18 16:53 ` Marcel Holtmann
2013-10-18 19:20 ` Robin Kreis
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.