* Re: [Xen-users] Xen 4.3.1 / Linux 3.12 panic
[not found] ` <1383735067.26213.65.camel@kazak.uk.xensource.com>
@ 2013-11-06 13:25 ` Wouter de Geus
[not found] ` <20131106132526.GE7624@uil.winnipeg.nl>
1 sibling, 0 replies; 8+ messages in thread
From: Wouter de Geus @ 2013-11-06 13:25 UTC (permalink / raw)
To: xen-users; +Cc: insong.liu, jbeulich, xen-devel
* Ian Campbell <Ian.Campbell@citrix.com> [2013-11-06 10:51:07 +0000]:
> > If this turns out to be stable I'll try again with cpufreq=dom0 to see if
> > that's also stable. I'll report my findings if you care.
>
> Please do.
With cpufreq=none I've been able to run through a windows 2008 installation
and some kernel compiles without problems. After that I rebooted with
cpufreq=dom0, and within 5 minutes ran into the first oops again:
[ 428.105061] BUG: unable to handle kernel paging request at ffffea0000dd8a48
[ 428.105103] IP: [<ffffffff8115c126>] unmap_single_vma+0x426/0x820
[ 428.105115] PGD 1281d6067 PUD 1281d5067 PMD 1281ce067 PTE 801000097bf53068
[ 428.105123] Oops: 0000 [#1] SMP
[ 428.105127] Modules linked in:
[ 428.105133] CPU: 3 PID: 1786 Comm: sh Not tainted 3.12.0-Desman #32
[ 428.105138] Hardware name: Supermicro H8DG6/H8DGi/H8DG6/H8DGi, BIOS 3.0 09/10/2012
[ 428.105142] task: ffff88011dbb1590 ti: ffff8800d5088000 task.ti: ffff8800d5088000
[ 428.105147] RIP: e030:[<ffffffff8115c126>] [<ffffffff8115c126>] unmap_single_vma+0x426/0x820
[ 428.105154] RSP: e02b:ffff8800d5089d30 EFLAGS: 00010246
[ 428.105157] RAX: 80000008002db165 RBX: ffff8800d2ad0d60 RCX: 0000000000dd8a40
[ 428.105161] RDX: 80000008002db165 RSI: 0000000001fac000 RDI: 80000008002db165
[ 428.105165] RBP: ffffea0000dd8a40 R08: ffff8800d2b52cf0 R09: 00000000fffffffa
[ 428.105169] R10: 0000000000000a6f R11: 00000063ad0a7abc R12: 0000000001fe5000
[ 428.105173] R13: ffffc00000000fff R14: 0000000001fac000 R15: ffff8800d5089e40
[ 428.105181] FS: 00002b839c48c600(0000) GS:ffff880122a60000(0000) knlGS:0000000000000000
[ 428.105186] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 428.105215] CR2: ffffea0000dd8a48 CR3: 00000000021de000 CR4: 0000000000040660
[ 428.105220] Stack:
[ 428.105222] ffff8800d6961c00 0000000000000000 ffff8800d2b52cf0 0000000000000000
[ 428.105229] ffffea00034ab430 80000008002db165 ffff8800c331c078 0000000001fe5000
[ 428.105236] ffff880000000000 00003ffffffff000 ffff88011dbb1590 0000000001fe4fff
[ 428.105242] Call Trace:
[ 428.105248] [<ffffffff8115d4c1>] ? unmap_vmas+0x41/0x90
[ 428.105254] [<ffffffff81165e1a>] ? exit_mmap+0x8a/0x150
[ 428.105261] [<ffffffff810abc19>] ? mmput+0x49/0x100
[ 428.105267] [<ffffffff810afb53>] ? do_exit+0x273/0xa30
[ 428.105273] [<ffffffff810dc045>] ? vtime_account_user+0x45/0x60
[ 428.105278] [<ffffffff810b10d4>] ? do_group_exit+0x34/0xa0
[ 428.105284] [<ffffffff810b114b>] ? SyS_exit_group+0xb/0x10
[ 428.105290] [<ffffffff81d4fd8f>] ? tracesys+0xe1/0xe6
[ 428.105294] Code: 48 8b 3c 24 4c 89 f6 48 89 da 66 66 66 90 66 66 90 41 80 4f 18 01 48 85 ed 0f 84 7a ff ff ff 48 83 7c 24 18 00 0f 85 02 03 00 00 <f6> 45 08 01 0f 84 70 01 00 00 48 89 ef ff 8c 24 98 00 00 00 e8
[ 428.105347] RIP [<ffffffff8115c126>] unmap_single_vma+0x426/0x820
[ 428.105353] RSP <ffff8800d5089d30>
[ 428.105356] CR2: ffffea0000dd8a48
[ 428.105360] ---[ end trace 81935aa1c6524ae3 ]---
> I suspect it shouldn't be necessary to use command lines to override
> these things, but I've no idea how to diagnose this further.
Removing the entire cpufreq part from my dom0 kernel might help :)
But then again, if that's a problem I would like the hypervisor to detect
and avoid this problem if that's possible.
> Once you have the findings if you could post a summary to xen-devel and
> CC jbeulich@suse.com & insong.liu@intel.com (cpufreq/power mgmt
> maintainers) perhaps they can advise.
Summary:
--------
The issue: Xen 4.3.1 and my Linux 3.12 build (with cpufreq) panics (page
requests, GPF, bad page state) usually within a few minutes.
When Xen is booted with cpufreq=none the problem seems to disappear, with
cpufreq=dom0 the problem is still there.
The machine I run this on is a dual opteron 6212 with 64GB ECC RAM on a
Supermicro H8DGi board.
Regards,
Wouter.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xen-users] Xen 4.3.1 / Linux 3.12 panic
[not found] ` <20131106132526.GE7624@uil.winnipeg.nl>
@ 2013-11-06 20:44 ` Konrad Rzeszutek Wilk
2013-11-07 11:20 ` Wouter de Geus
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Konrad Rzeszutek Wilk @ 2013-11-06 20:44 UTC (permalink / raw)
To: xen-users, xen-devel, jbeulich, insong.liu, benv-xensource.com
On Wed, Nov 06, 2013 at 02:25:28PM +0100, Wouter de Geus wrote:
> * Ian Campbell <Ian.Campbell@citrix.com> [2013-11-06 10:51:07 +0000]:
>
> > > If this turns out to be stable I'll try again with cpufreq=dom0 to see if
> > > that's also stable. I'll report my findings if you care.
> >
> > Please do.
>
> With cpufreq=none I've been able to run through a windows 2008 installation
> and some kernel compiles without problems. After that I rebooted with
> cpufreq=dom0, and within 5 minutes ran into the first oops again:
Is there a particular reason you had tried 'cpufreq'? Sorry if that
was answered earlier?
>
> [ 428.105061] BUG: unable to handle kernel paging request at ffffea0000dd8a48
> [ 428.105103] IP: [<ffffffff8115c126>] unmap_single_vma+0x426/0x820
> [ 428.105115] PGD 1281d6067 PUD 1281d5067 PMD 1281ce067 PTE 801000097bf53068
> [ 428.105123] Oops: 0000 [#1] SMP
> [ 428.105127] Modules linked in:
> [ 428.105133] CPU: 3 PID: 1786 Comm: sh Not tainted 3.12.0-Desman #32
> [ 428.105138] Hardware name: Supermicro H8DG6/H8DGi/H8DG6/H8DGi, BIOS 3.0 09/10/2012
> [ 428.105142] task: ffff88011dbb1590 ti: ffff8800d5088000 task.ti: ffff8800d5088000
> [ 428.105147] RIP: e030:[<ffffffff8115c126>] [<ffffffff8115c126>] unmap_single_vma+0x426/0x820
> [ 428.105154] RSP: e02b:ffff8800d5089d30 EFLAGS: 00010246
> [ 428.105157] RAX: 80000008002db165 RBX: ffff8800d2ad0d60 RCX: 0000000000dd8a40
> [ 428.105161] RDX: 80000008002db165 RSI: 0000000001fac000 RDI: 80000008002db165
> [ 428.105165] RBP: ffffea0000dd8a40 R08: ffff8800d2b52cf0 R09: 00000000fffffffa
> [ 428.105169] R10: 0000000000000a6f R11: 00000063ad0a7abc R12: 0000000001fe5000
> [ 428.105173] R13: ffffc00000000fff R14: 0000000001fac000 R15: ffff8800d5089e40
> [ 428.105181] FS: 00002b839c48c600(0000) GS:ffff880122a60000(0000) knlGS:0000000000000000
> [ 428.105186] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
> [ 428.105215] CR2: ffffea0000dd8a48 CR3: 00000000021de000 CR4: 0000000000040660
> [ 428.105220] Stack:
> [ 428.105222] ffff8800d6961c00 0000000000000000 ffff8800d2b52cf0 0000000000000000
> [ 428.105229] ffffea00034ab430 80000008002db165 ffff8800c331c078 0000000001fe5000
> [ 428.105236] ffff880000000000 00003ffffffff000 ffff88011dbb1590 0000000001fe4fff
> [ 428.105242] Call Trace:
> [ 428.105248] [<ffffffff8115d4c1>] ? unmap_vmas+0x41/0x90
> [ 428.105254] [<ffffffff81165e1a>] ? exit_mmap+0x8a/0x150
> [ 428.105261] [<ffffffff810abc19>] ? mmput+0x49/0x100
> [ 428.105267] [<ffffffff810afb53>] ? do_exit+0x273/0xa30
> [ 428.105273] [<ffffffff810dc045>] ? vtime_account_user+0x45/0x60
> [ 428.105278] [<ffffffff810b10d4>] ? do_group_exit+0x34/0xa0
> [ 428.105284] [<ffffffff810b114b>] ? SyS_exit_group+0xb/0x10
> [ 428.105290] [<ffffffff81d4fd8f>] ? tracesys+0xe1/0xe6
> [ 428.105294] Code: 48 8b 3c 24 4c 89 f6 48 89 da 66 66 66 90 66 66 90 41 80 4f 18 01 48 85 ed 0f 84 7a ff ff ff 48 83 7c 24 18 00 0f 85 02 03 00 00 <f6> 45 08 01 0f 84 70 01 00 00 48 89 ef ff 8c 24 98 00 00 00 e8
> [ 428.105347] RIP [<ffffffff8115c126>] unmap_single_vma+0x426/0x820
> [ 428.105353] RSP <ffff8800d5089d30>
> [ 428.105356] CR2: ffffea0000dd8a48
> [ 428.105360] ---[ end trace 81935aa1c6524ae3 ]---
>
> > I suspect it shouldn't be necessary to use command lines to override
> > these things, but I've no idea how to diagnose this further.
>
> Removing the entire cpufreq part from my dom0 kernel might help :)
> But then again, if that's a problem I would like the hypervisor to detect
> and avoid this problem if that's possible.
So the cpufreq=dom0 is kind of an nops as the Linux kernel will disable
the native CPUfreq machinery. This is done b/c it does not make sense
for Linux dom0 to control the CPU freq when it has no idea of the
workloads (the hypervisor has it).
But with the 'cpufreq=dom0' you are getting faults.
So the other question is - does anything happen if you disable ACPI power
states in the BIOS?
>
> > Once you have the findings if you could post a summary to xen-devel and
> > CC jbeulich@suse.com & insong.liu@intel.com (cpufreq/power mgmt
> > maintainers) perhaps they can advise.
>
> Summary:
> --------
> The issue: Xen 4.3.1 and my Linux 3.12 build (with cpufreq) panics (page
> requests, GPF, bad page state) usually within a few minutes.
> When Xen is booted with cpufreq=none the problem seems to disappear, with
> cpufreq=dom0 the problem is still there.
> The machine I run this on is a dual opteron 6212 with 64GB ECC RAM on a
> Supermicro H8DGi board.
>
> Regards,
>
> Wouter.
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xen-users] Xen 4.3.1 / Linux 3.12 panic
2013-11-06 20:44 ` Konrad Rzeszutek Wilk
@ 2013-11-07 11:20 ` Wouter de Geus
2013-11-07 11:26 ` Ian Campbell
[not found] ` <20131107112013.GG7624@uil.winnipeg.nl>
2 siblings, 0 replies; 8+ messages in thread
From: Wouter de Geus @ 2013-11-07 11:20 UTC (permalink / raw)
To: xen-users, xen-devel, konrad.wilk, jbeulich, insong.liu
[-- Attachment #1: Type: text/plain, Size: 2548 bytes --]
* Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [2013-11-06 15:44:58 -0500]:
> Is there a particular reason you had tried 'cpufreq'? Sorry if that
> was answered earlier?
Ian suggested that the problem might be cpufreq related, (see
http://lists.xenproject.org/archives/html/xen-users/2013-11/msg00053.html )
> So the cpufreq=dom0 is kind of an nops as the Linux kernel will disable
> the native CPUfreq machinery. This is done b/c it does not make sense
> for Linux dom0 to control the CPU freq when it has no idea of the
> workloads (the hypervisor has it).
Aha. Not exactly what I understood from the xen documentation
(http://wiki.xen.org/wiki/Xen_power_management), but I was just testing it
to see if it would be stable.
> But with the 'cpufreq=dom0' you are getting faults.
With both cpufreq=dom0 and not specifying cpufreq at all, which defaults
to cpufreq=xen according to the docs the system will crash within the hour.
With cpufreq=none the system has now been stable for over a day without any
kernel warnings etc whatsoever (and I tried compiling a kernel for some load).
> So the other question is - does anything happen if you disable ACPI power
> states in the BIOS?
Let's try ;)
The BIOS has the following options that I consider relevant:
Name [Current] (Options)
- PowerNow [Enabled]
- C State Mode [C6] (Disabled, C6)
- PowerCap [P-state 0] (P-state 0 through 4)
- HPC Mode [Enabled] (Disabled, Enabled)
- CPB Mode [Auto] (Disabled, Auto)
- C1E Support [Enabled] (Enabled, Disabled)
When I set PowerNow to disabled the C State Mode, PowerCap and HPC options also disappear.
After booting with PowerNow disabled (without the cpufreq option) I tried a kernel compile
twice and some heavy I/O under which the system was stable.
So that seems to have the same effect as cpufreq=none.
- With PowerNow enabled (C State Mode and HPC / CPB Mode disabled ,no cpufreq cmdline)
the system also seems stable.
- C State Mode set to C6 (HPC/CPB disabled, no cpufreq cmdline), seems stable.
- HPC enabled, (CPB disabled, no cpufreq cmdline), crashed (serial console log attached
as xen-crash-hpc-enabled).
These tests are inconclusive since I can't reliably trigger a panic, but it
usually happened within a few minutes when compiling a kernel or other load.
Even without load the system would crash mind you, just 'idling' it managed to crash
as well but that often took longer.
Anyhow, please let me know if there's anything else I can test for you guys.
And thanks for the help :)
Regards,
Wouter.
[-- Attachment #2: xen-crash-hpc-enabled --]
[-- Type: text/plain, Size: 64963 bytes --]
__ __ _ _ _____ _
\ \/ /___ _ __ | || | |___ / / |
\ // _ \ '_ \ | || |_ |_ \ | |
/ \ __/ | | | |__ _| ___) || |
/_/\_\___|_| |_| |_|(_)____(_)_|
(XEN) Xen version 4.3.1 (root@intern.desman.nl) (gcc (GCC) 4.8.2) debug=n Mon Nov 4 14:05:28 CET 2013
(XEN) Latest ChangeSet:
(XEN) Bootloader: GRUB 2.00
(XEN) Command line: placeholder dom0_mem=4G,max:4G no-bootscrub noreboot=true loglvl=all guest_loglvl=all com1=115200,8n1,0x3e8,7 console=com1,vga
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 4 MBR signatures
(XEN) Found 4 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 0000000000092000 (usable)
(XEN) 0000000000092000 - 00000000000a0000 (reserved)
(XEN) 00000000000e6000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000d7e90000 (usable)
(XEN) 00000000d7e90000 - 00000000d7eb4000 (ACPI data)
(XEN) 00000000d7eb4000 - 00000000d7ee0000 (ACPI NVS)
(XEN) 00000000d7ee0000 - 00000000d8000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000ffe00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000001024000000 (usable)
(XEN) ACPI: RSDP 000FA650, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT D7E90100, 006C (r1 SMCI 20120910 MSFT 97)
(XEN) ACPI: FACP D7E90290, 00F4 (r4 091012 FACP2219 20120910 MSFT 97)
(XEN) ACPI: DSDT D7E906B0, 7040 (r2 1BC11 1BC11000 0 INTL 20051117)
(XEN) ACPI: FACS D7EB4000, 0040
(XEN) ACPI: APIC D7E90390, 0158 (r2 091012 APIC2219 20120910 MSFT 97)
(XEN) ACPI: MCFG D7E904F0, 003C (r1 091012 OEMMCFG 20120910 MSFT 97)
(XEN) ACPI: OEMB D7EB4040, 00BC (r1 091012 OEMB2219 20120910 MSFT 97)
(XEN) ACPI: HPET D7E9A6B0, 0038 (r1 091012 OEMHPET 20120910 MSFT 97)
(XEN) ACPI: IVRS D7E9A6F0, 00D8 (r1 AMD RD890S 202031 AMD 0)
(XEN) ACPI: SRAT D7E9A7D0, 01A8 (r2 AMD AGESA 1 AMD 1)
(XEN) ACPI: SLIT D7E9A980, 003C (r1 AMD AGESA 1 AMD 1)
(XEN) ACPI: SSDT D7E9A9C0, 1A54 (r1 A M I POWERNOW 1 AMD 1)
(XEN) System RAM: 65470MB (67041416kB)
(XEN) SRAT: PXM 0 -> APIC 32 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 33 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 34 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 35 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 36 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 37 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 38 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 39 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 64 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 65 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 66 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 67 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 68 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 69 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 70 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 71 -> Node 0
(XEN) SRAT: Node 0 PXM 0 0-a0000
(XEN) SRAT: Node 0 PXM 0 100000-d8000000
(XEN) SRAT: Node 0 PXM 0 100000000-1024000000
(XEN) NUMA: Allocated memnodemap from 1021880000 - 1021891000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[d7eb400c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
(XEN) Processor #32 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x21] enabled)
(XEN) Processor #33 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
(XEN) Processor #34 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x23] enabled)
(XEN) Processor #35 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled)
(XEN) Processor #36 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x25] enabled)
(XEN) Processor #37 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x26] enabled)
(XEN) Processor #38 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x27] enabled)
(XEN) Processor #39 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x40] enabled)
(XEN) Processor #64 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x41] enabled)
(XEN) Processor #65 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x42] enabled)
(XEN) Processor #66 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x43] enabled)
(XEN) Processor #67 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x44] enabled)
(XEN) Processor #68 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x45] enabled)
(XEN) Processor #69 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x46] enabled)
(XEN) Processor #70 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x47] enabled)
(XEN) Processor #71 5:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x98] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x99] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x9a] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x9b] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x9c] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x9d] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x9e] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x9f] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) Overriding APIC driver with bigsmp
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Phys. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8300 base: 0xfed00000
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 32 CPUs (16 hotplug CPUs)
(XEN) IRQ limits: 24 GSI, 3064 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2600.075 MHz processor.
(XEN) Initing memory sharing.
(XEN) xstate_init: using cntxt_size: 0x3c0 and states: 0x4000000000000007
(XEN) AMD Fam15h machine check reporting enabled
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-ff
(XEN) IVHD Error: Conflicting IO-APIC 0 entries
(XEN) AMD-Vi: Error initialization
(XEN) I/O virtualisation disabled
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 128 KiB.
(XEN) HVM: ASIDs enabled.
(XEN) SVM: Supported advanced features:
(XEN) - Nested Page Tables (NPT)
(XEN) - Last Branch Record (LBR) Virtualisation
(XEN) - Next-RIP Saved on #VMEXIT
(XEN) - VMCB Clean Bits
(XEN) - DecodeAssists
(XEN) - Pause-Intercept Filter
(XEN) - TSC Rate MSR
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) microcode: CPU1 collect_cpu_info: patch_id=0x6000629
(XEN) microcode: CPU2 collect_cpu_info: patch_id=0x6000629
(XEN) microcode: CPU3 collect_cpu_info: patch_id=0x6000629
(XEN) microcode: CPU4 collect_cpu_info: patch_id=0x6000629
(XEN) microcode: CPU5 collect_cpu_info: patch_id=0x6000629
(XEN) microcode: CPU6 collect_cpu_info: patch_id=0x6000629
(XEN) microcode: CPU7 collect_cpu_info: patch_id=0x6000629
(XEN) microcode: CPU8 collect_cpu_info: patch_id=0x6000629
(XEN) microcode: CPU9 collect_cpu_info: patch_id=0x6000629
(XEN) microcode: CPU10 collect_cpu_info: patch_id=0x6000629
(XEN) microcode: CPU11 collect_cpu_info: patch_id=0x6000629
(XEN) microcode: CPU12 collect_cpu_info: patch_id=0x6000629
(XEN) microcode: CPU13 collect_cpu_info: patch_id=0x6000629
(XEN) microcode: CPU14 collect_cpu_info: patch_id=0x6000629
(XEN) microcode: CPU15 collect_cpu_info: patch_id=0x6000629
(XEN) Brought up 16 CPUs
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x297b000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000830000000->0000000834000000 (1032192 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff8297b000
(XEN) Init. ramdisk: ffffffff8297b000->ffffffff8297b000
(XEN) Phys-Mach map: ffffffff8297b000->ffffffff8317b000
(XEN) Start info: ffffffff8317b000->ffffffff8317b4b4
(XEN) Page tables: ffffffff8317c000->ffffffff83199000
(XEN) Boot stack: ffffffff83199000->ffffffff8319a000
(XEN) TOTAL: ffffffff80000000->ffffffff83400000
(XEN) ENTRY ADDRESS: ffffffff823391e0
(XEN) Dom0 has maximum 16 VCPUs
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 256kB init memory.
mapping kernel into physical memory
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.0-Desman (root@dom0) (gcc version 4.8.2 (GCC) ) #32 SMP Wed Nov 6 11:36:57 CET 2013
[ 0.000000] Command line: placeholder root=/dev/md0 ro console=hvc0 earlyprintk=xen
[ 0.000000] Freeing 92-100 pfn range: 110 pages freed
[ 0.000000] Freeing d7e90-100000 pfn range: 164208 pages freed
[ 0.000000] Released 164318 pages of unused memory
[ 0.000000] Set 164318 page(s) to 1-1 mapping
[ 0.000000] Populating 100000-1281de pfn range: 164318 pages added
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000091fff] usable
[ 0.000000] Xen: [mem 0x0000000000092000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x00000000d7e8ffff] usable
[ 0.000000] Xen: [mem 0x00000000d7e90000-0x00000000d7eb3fff] ACPI data
[ 0.000000] Xen: [mem 0x00000000d7eb4000-0x00000000d7edffff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000d7ee0000-0x00000000d7ffffff] reserved
[ 0.000000] Xen: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x00000001281ddfff] usable
[ 0.000000] Xen: [mem 0x00000001281de000-0x0000001023ffffff] unusable
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1281de max_arch_pfn = 0x400000000
[ 0.000000] e820: last_pfn = 0xd7e90 max_arch_pfn = 0x400000000
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x127e00000-0x127ffffff]
[ 0.000000] init_memory_mapping: [mem 0x124000000-0x127dfffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x123ffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xd7e8ffff]
[ 0.000000] init_memory_mapping: [mem 0x128000000-0x1281ddfff]
[ 0.000000] ACPI: RSDP 00000000000fa650 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000d7e90100 0006C (v01 SMCI 20120910 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000d7e90290 000F4 (v04 091012 FACP2219 20120910 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000d7e906b0 07040 (v02 1BC11 1BC11000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000d7eb4000 00040
[ 0.000000] ACPI: APIC 00000000d7e90390 00158 (v02 091012 APIC2219 20120910 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000d7e904f0 0003C (v01 091012 OEMMCFG 20120910 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000d7eb4040 000BC (v01 091012 OEMB2219 20120910 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000d7e9a6b0 00038 (v01 091012 OEMHPET 20120910 MSFT 00000097)
[ 0.000000] ACPI: IVRS 00000000d7e9a6f0 000D8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SRAT 00000000d7e9a7d0 001A8 (v02 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SLIT 00000000d7e9a980 0003C (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000d7e9a9c0 01A54 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001281ddfff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1281ddfff]
[ 0.000000] NODE_DATA [mem 0x1281d9000-0x1281ddfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1281ddfff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00091fff]
[ 0.000000] node 0: [mem 0x00100000-0xd7e8ffff]
[ 0.000000] node 0: [mem 0x100000000-0x1281ddfff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x21] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x23] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x25] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x26] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x27] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x40] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x41] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x42] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x43] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x44] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x45] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x46] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x47] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x98] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x99] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x9a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x9b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x9c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x9d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x9e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x9f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 16 hotplug CPUs
[ 0.000000] e820: [mem 0xf0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.3.1 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880122a00000 s81152 r8192 d21248 u131072
[ 2.884821] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032167
[ 2.884825] Policy zone: Normal
[ 2.884828] Kernel command line: placeholder root=/dev/md0 ro console=hvc0 earlyprintk=xen
[ 2.885443] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 2.885499] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 2.939402] software IO TLB [mem 0x11ea00000-0x122a00000] (64MB) mapped at [ffff88011ea00000-ffff8801229fffff]
[ 2.969809] Memory: 4018348K/4194300K available (13647K kernel code, 1357K rwdata, 4580K rodata, 1076K init, 1120K bss, 175952K reserved)
[ 2.969968] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 2.970009] Hierarchical RCU implementation.
[ 2.970012] CONFIG_RCU_FANOUT set to non-default value of 32
[ 2.970014] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=16.
[ 2.970884] NR_IRQS:4352 nr_irqs:808 16
[ 2.971037] xen: sci override: global_irq=9 trigger=0 polarity=1
[ 2.971096] xen: acpi sci 9
[ 2.977505] Console: colour VGA+ 80x25
[ 2.977511] console [hvc0] enabled, bootconsole disabled
[ 2.977511] console [hvc0] enabled, bootconsole disabled
[ 2.977561] installing Xen timer for CPU 0
[ 2.977597] tsc: Detected 2600.074 MHz processor
[ 2.977609] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.14 BogoMIPS (lpj=2600074)
[ 2.977616] pid_max: default: 32768 minimum: 301
[ 2.977678] Security Framework initialized
[ 2.978611] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 2.980487] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 2.981267] Mount-cache hash table entries: 256
[ 2.981605] Initializing cgroup subsys devices
[ 2.981611] Initializing cgroup subsys freezer
[ 2.981616] Initializing cgroup subsys net_cls
[ 2.981620] Initializing cgroup subsys blkio
[ 2.981624] Initializing cgroup subsys perf_event
[ 2.981630] Initializing cgroup subsys net_prio
[ 2.981711] CPU: Physical Processor ID: 0
[ 2.981715] CPU: Processor Core ID: 0
[ 2.981719] mce: CPU supports 2 MCE banks
[ 2.981741] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 2.981741] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 2.981741] tlb_flushall_shift: 5
[ 2.981923] Freeing SMP alternatives memory: 56K (ffffffff82432000 - ffffffff82440000)
[ 2.983249] ACPI: Core revision 20130725
[ 2.986904] ACPI: All ACPI Tables successfully acquired
[ 2.989863] cpu 0 spinlock event irq 41
[ 3.005939] Performance Events: Fam15h core perfctr, (XEN) traps.c:2520:d0 Domain attempted WRMSR 00000000c0010201 from 0x0000000000000000 to 0x000000000000ffff.
Broken PMU hardware detected, using software events only.
[ 3.005967] Failed to access perfctr msr (MSR c0010201 is 0)
[ 3.006253] MCE: In-kernel MCE decoding enabled.
[ 3.006474] installing Xen timer for CPU 1
[ 3.006489] cpu 1 spinlock event irq 48
[ 3.006902] installing Xen timer for CPU 2
[ 3.006920] cpu 2 spinlock event irq 55
[ 3.007255] installing Xen timer for CPU 3
[ 3.007270] cpu 3 spinlock event irq 62
[ 3.007564] installing Xen timer for CPU 4
[ 3.007612] cpu 4 spinlock event irq 69
[ 3.007992] installing Xen timer for CPU 5
[ 3.008007] cpu 5 spinlock event irq 76
[ 3.008308] installing Xen timer for CPU 6
[ 3.008323] cpu 6 spinlock event irq 83
[ 3.008691] installing Xen timer for CPU 7
[ 3.008706] cpu 7 spinlock event irq 90
[ 3.009047] installing Xen timer for CPU 8
[ 3.009062] cpu 8 spinlock event irq 97
[ 3.009485] installing Xen timer for CPU 9
[ 3.009506] cpu 9 spinlock event irq 104
[ 3.009892] installing Xen timer for CPU 10
[ 3.009908] cpu 10 spinlock event irq 111
[ 3.010331] installing Xen timer for CPU 11
[ 3.010386] cpu 11 spinlock event irq 118
[ 3.010759] installing Xen timer for CPU 12
[ 3.010775] cpu 12 spinlock event irq 125
[ 3.011216] installing Xen timer for CPU 13
[ 3.011232] cpu 13 spinlock event irq 132
[ 3.011606] installing Xen timer for CPU 14
[ 3.011625] cpu 14 spinlock event irq 139
[ 3.012053] installing Xen timer for CPU 15
[ 3.012070] cpu 15 spinlock event irq 146
[ 3.012338] Brought up 16 CPUs
[ 3.012834] devtmpfs: initialized
[ 3.017559] xor: automatically using best checksumming function:
[ 3.027714] avx : 4352.000 MB/sec
[ 3.027722] pinctrl core: initialized pinctrl subsystem
[ 3.027781] xen:grant_table: Grant tables using version 2 layout
[ 3.027797] Grant table initialized
[ 3.027861] NET: Registered protocol family 16
[ 3.028439] ACPI: bus type PCI registered
[ 3.028445] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.028703] dca service started, version 1.12.1
[ 3.028737] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 3.028743] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
(XEN) mm.c:809: d0: Forcing read-only access to MFN e0002
(XEN) mm.c:809: d0: Forcing read-only access to MFN e4002
[ 3.074626] PCI: Using configuration type 1 for base access
[ 3.078429] bio: create slab <bio-0> at 0
[ 3.096389] raid6: sse2x1 2011 MB/s
[ 3.114295] raid6: sse2x2 6535 MB/s
[ 3.132217] raid6: sse2x4 8117 MB/s
[ 3.132221] raid6: using algorithm sse2x4 (8117 MB/s)
[ 3.132225] raid6: using ssse3x2 recovery algorithm
[ 3.132496] ACPI: Added _OSI(Module Device)
[ 3.132500] ACPI: Added _OSI(Processor Device)
[ 3.132504] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 3.132508] ACPI: Added _OSI(Processor Aggregator Device)
[ 3.136826] ACPI: Executed 2 blocks of module-level executable AML code
[ 3.147960] ACPI: Interpreter enabled
[ 3.147971] ACPI: (supports S0 S5)
[ 3.147975] ACPI: Using IOAPIC for interrupt routing
[ 3.148016] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.148197] ACPI: No dock devices found.
[ 3.158377] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-03])
[ 3.158386] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 3.158392] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 3.158933] ACPI: \_SB_.PCI0.PCIE: can't evaluate _ADR (0x5)
[ 3.159025] ACPI: \_SB_.PCI0.ITPM: can't evaluate _ADR (0x5)
[ 3.159031] PCI host bridge to bus 0000:00
[ 3.159035] pci_bus 0000:00: root bus resource [bus 00-03]
[ 3.159040] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 3.159045] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 3.159050] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
[ 3.159054] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
[ 3.159059] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 3.159064] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 3.159069] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 3.159073] pci_bus 0000:00: root bus resource [mem 0xde000000-0xdfffffff]
[ 3.159078] pci_bus 0000:00: root bus resource [mem 0xdd000000-0xddffffff]
[ 3.159083] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:00.2
[ 3.160036] pci 0000:00:0c.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:0c.0
[ 3.160364] pci 0000:00:0d.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:0d.0
(XEN) PCI add device 0000:00:11.0
[ 3.161037] pci 0000:00:12.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:12.0
[ 3.161333] pci 0000:00:12.1: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:12.1
[ 3.161745] pci 0000:00:12.2: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:12.2
[ 3.162039] pci 0000:00:13.0: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:13.0
[ 3.162308] pci 0000:00:13.1: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:13.1
[ 3.162707] pci 0000:00:13.2: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:13.2
(XEN) PCI add device 0000:00:14.0
(XEN) PCI add device 0000:00:14.3
[ 3.163531] pci 0000:00:14.4: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:14.4
[ 3.163821] pci 0000:00:14.5: System wakeup disabled by ACPI
(XEN) PCI add device 0000:00:14.5
(XEN) PCI add device 0000:00:18.0
(XEN) PCI add device 0000:00:18.1
(XEN) PCI add device 0000:00:18.2
(XEN) PCI add device 0000:00:18.3
(XEN) PCI add device 0000:00:18.4
(XEN) PCI add device 0000:00:18.5
(XEN) PCI add device 0000:00:19.0
(XEN) PCI add device 0000:00:19.1
(XEN) PCI add device 0000:00:19.2
(XEN) PCI add device 0000:00:19.3
(XEN) PCI add device 0000:00:19.4
(XEN) PCI add device 0000:00:19.5
(XEN) PCI add device 0000:00:1a.0
(XEN) PCI add device 0000:00:1a.1
(XEN) PCI add device 0000:00:1a.2
(XEN) PCI add device 0000:00:1a.3
(XEN) PCI add device 0000:00:1a.4
(XEN) PCI add device 0000:00:1a.5
(XEN) PCI add device 0000:00:1b.0
(XEN) PCI add device 0000:00:1b.1
(XEN) PCI add device 0000:00:1b.2
(XEN) PCI add device 0000:00:1b.3
(XEN) PCI add device 0000:00:1b.4
(XEN) PCI add device 0000:00:1b.5
(XEN) PCI add device 0000:03:00.0
[ 3.168795] pci 0000:00:0c.0: PCI bridge to [bus 03]
(XEN) PCI add device 0000:02:00.0
(XEN) PCI add device 0000:02:00.1
[ 3.171343] pci 0000:00:0d.0: PCI bridge to [bus 02]
(XEN) PCI add device 0000:01:04.0
[ 3.171833] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 3.173091] ACPI: PCI Root Bridge [PC40] (domain 0000 [bus 40])
[ 3.173256] acpi PNP0A08:01: Requesting ACPI _OSC control (0x1d)
[ 3.173406] acpi PNP0A08:01: ACPI _OSC control (0x1d) granted
[ 3.173709] PCI host bridge to bus 0000:40
[ 3.173715] pci_bus 0000:40: root bus resource [bus 40]
(XEN) PCI add device 0000:40:00.0
(XEN) PCI add device 0000:40:00.2
[ 3.174564] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
[ 3.174646] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 3.174718] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 *14 15)
[ 3.174789] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 3.174860] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 *15)
[ 3.174940] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 3.175013] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 3.175083] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 3.175455] xen:balloon: Initialising balloon driver
[ 3.175655] xen_balloon: Initialising balloon driver
[ 3.175777] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 3.175783] vgaarb: loaded
[ 3.175786] vgaarb: bridge control possible 0000:01:04.0
[ 3.175971] SCSI subsystem initialized
[ 3.176012] ACPI: bus type USB registered
[ 3.176036] usbcore: registered new interface driver usbfs
[ 3.176050] usbcore: registered new interface driver hub
[ 3.176110] usbcore: registered new device driver usb
[ 3.176162] pps_core: LinuxPPS API ver. 1 registered
[ 3.176166] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.176174] PTP clock support registered
[ 3.176430] EDAC MC: Ver: 3.0.0
[ 3.176816] PCI: Using ACPI for IRQ routing
[ 3.198173] Switched to clocksource xen
[ 3.198369] FS-Cache: Loaded
[ 3.198479] CacheFiles: Loaded
[ 3.198503] pnp: PnP ACPI init
[ 3.198514] ACPI: bus type PNP registered
[ 3.198904] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved
[ 3.199537] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 3.199544] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 3.199831] system 00:08: [io 0x0ca2-0x0ca3] has been reserved
[ 3.199837] system 00:08: [io 0x0550-0x0551] has been reserved
[ 3.199842] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 3.199847] system 00:08: [io 0x040b] has been reserved
[ 3.199852] system 00:08: [io 0x04d6] has been reserved
[ 3.199857] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 3.199862] system 00:08: [io 0x0c14] has been reserved
[ 3.199867] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 3.199872] system 00:08: [io 0x0c52] has been reserved
[ 3.199876] system 00:08: [io 0x0c6c] has been reserved
[ 3.199881] system 00:08: [io 0x0c6f] has been reserved
[ 3.199886] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 3.199891] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 3.199896] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 3.199901] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 3.199906] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 3.199911] system 00:08: [io 0x0800-0x089f] could not be reserved
[ 3.199917] system 00:08: [io 0x0b00-0x0b0f] has been reserved
[ 3.199922] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 3.199927] system 00:08: [io 0x0900-0x090f] has been reserved
[ 3.199932] system 00:08: [io 0x0910-0x091f] has been reserved
[ 3.199937] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 3.199943] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 3.199948] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 3.199954] system 00:08: [mem 0xffe50000-0xffe5e05f] has been reserved
[ 3.200899] system 00:0b: [io 0x0a00-0x0a0f] has been reserved
[ 3.200905] system 00:0b: [io 0x0a10-0x0a1f] has been reserved
[ 3.201145] Already setup the GSI :7
[ 3.201336] system 00:0d: [io 0x164e-0x164f] has been reserved
[ 3.201440] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[ 3.201667] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
[ 3.201673] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 3.201679] system 00:0f: [mem 0xfec00000-0xffffffff] could not be reserved
[ 3.202011] pnp 00:11: disabling [mem 0xdd004000-0xdd007fff] because it overlaps 0000:00:14.4 BAR 9 [mem 0xdd000000-0xddffffff pref]
[ 3.202029] pnp 00:11: disabling [mem 0xdd004000-0xdd007fff disabled] because it overlaps 0000:01:04.0 BAR 0 [mem 0xdd000000-0xddffffff pref]
[ 3.202229] pnp: PnP ACPI: found 18 devices
[ 3.202233] ACPI: bus type PNP unregistered
[ 3.212717] PM-Timer failed consistency check (0xffffff) - aborting.
[ 3.212774] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 3.212782] pci 0000:00:0c.0: bridge window [io 0xe000-0xefff]
[ 3.212793] pci 0000:00:0c.0: bridge window [mem 0xdff00000-0xdfffffff]
[ 3.212813] pci 0000:00:0d.0: PCI bridge to [bus 02]
[ 3.212847] pci 0000:00:0d.0: bridge window [io 0xd000-0xdfff]
[ 3.212858] pci 0000:00:0d.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 3.212874] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 3.212886] pci 0000:00:14.4: bridge window [mem 0xdef00000-0xdf7fffff]
[ 3.212896] pci 0000:00:14.4: bridge window [mem 0xdd000000-0xddffffff pref]
[ 3.213018] NET: Registered protocol family 2
[ 3.213327] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 3.213604] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 3.213753] TCP: Hash tables configured (established 32768 bind 32768)
[ 3.213795] TCP: reno registered
[ 3.213816] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 3.213857] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 3.213983] NET: Registered protocol family 1
[ 3.214242] RPC: Registered named UNIX socket transport module.
[ 3.214247] RPC: Registered udp transport module.
[ 3.214250] RPC: Registered tcp transport module.
[ 3.214254] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.929688] Already setup the GSI :16
[ 4.080601] Already setup the GSI :18
[ 4.155969] Already setup the GSI :18
[ 4.232676] Machine check injector initialized
[ 4.234240] microcode: CPU0: patch_level=0x06000629
[ 4.234263] microcode: CPU1: patch_level=0x06000629
[ 4.234295] microcode: CPU2: patch_level=0x06000629
[ 4.234329] microcode: CPU3: patch_level=0x06000629
[ 4.234352] microcode: CPU4: patch_level=0x06000629
[ 4.234370] microcode: CPU5: patch_level=0x06000629
[ 4.234400] microcode: CPU6: patch_level=0x06000629
[ 4.234422] microcode: CPU7: patch_level=0x06000629
[ 4.234452] microcode: CPU8: patch_level=0x06000629
[ 4.234477] microcode: CPU9: patch_level=0x06000629
[ 4.234511] microcode: CPU10: patch_level=0x06000629
[ 4.234533] microcode: CPU11: patch_level=0x06000629
[ 4.234553] microcode: CPU12: patch_level=0x06000629
[ 4.234571] microcode: CPU13: patch_level=0x06000629
[ 4.234580] microcode: CPU14: patch_level=0x06000629
[ 4.234596] microcode: CPU15: patch_level=0x06000629
[ 4.234651] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.238049] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 4.238205] sha256_ssse3: Using AVX optimized SHA-256 implementation
[ 4.238359] sha512_ssse3: Using AVX optimized SHA-512 implementation
[ 4.242432] audit: initializing netlink socket (disabled)
[ 4.242454] type=2000 audit(1383822164.227:1): initialized
[ 4.244646] VFS: Disk quotas dquot_6.5.2
[ 4.244709] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.245062] DLM installed
[ 4.245497] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 4.246401] NFS: Registering the id_resolver key type
[ 4.246416] Key type id_resolver registered
[ 4.246419] Key type id_legacy registered
[ 4.246426] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 4.246780] FS-Cache: Netfs 'cifs' registered for caching
[ 4.246911] NTFS driver 2.1.30 [Flags: R/W].
[ 4.247077] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 4.247129] QNX4 filesystem 0.2.3 registered.
[ 4.247159] QNX6 filesystem 1.0.0 registered.
[ 4.247226] fuse init (API version 7.22)
[ 4.247517] NILFS version 2 loaded
[ 4.247649] ceph: loaded (mds proto 32)
[ 4.247660] msgmni has been set to 7848
[ 4.252433] NET: Registered protocol family 38
[ 4.252440] async_tx: api initialized (async)
[ 4.252446] Key type asymmetric registered
[ 4.252449] Asymmetric key parser 'x509' registered
[ 4.252493] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 4.252647] io scheduler noop registered
[ 4.252652] io scheduler deadline registered
[ 4.252689] io scheduler cfq registered (default)
[ 4.252993] Already setup the GSI :16
[ 4.253251] Already setup the GSI :17
[ 4.253445] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.253568] usbcore: registered new interface driver udlfb
[ 4.253620] vga16fb: mapped to 0xffff8800000a0000
[ 4.521835] Console: switching to colour frame buffer device 80x30
[ 4.535072] fb0: VGA16 VGA frame buffer device
[ 4.535128] ipmi message handler version 39.2
[ 4.535143] ipmi device interface
[ 4.535165] IPMI System Interface driver.
[ 4.535226] ipmi_si: probing via SMBIOS
[ 4.535231] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 4.535235] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 4.535242] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 4.600795] ipmi_si ipmi_si.0: Found new BMC (man_id: 0x00b980, prod_id: 0xbc11, dev_id: 0x20)
[ 4.600878] ipmi_si ipmi_si.0: IPMI kcs interface initialized
[ 4.603323] IPMI Watchdog: driver initialized
[ 4.603329] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 4.605607] IPMI poweroff: ATCA Detect mfg 0xB980 prod 0xBC11
[ 4.605613] IPMI poweroff: Found a chassis style poweroff function
[ 4.605718] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 4.605727] ACPI: Power Button [PWRB]
[ 4.605773] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 4.605779] ACPI: Power Button [PWRF]
[ 4.656580] GHES: HEST is not enabled!
[ 4.656587] ERST DBG: ERST support is disabled.
[ 4.656591] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 4.656934] xen:xen_evtchn: Event-channel device installed
[ 4.657393] xen_pciback: backend is vpci
[ 4.657943] xen_acpi_processor: Uploading Xen processor PM info
[ 4.662235] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.683370] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 4.704517] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 4.704911] Initializing Nozomi driver 2.1d
[ 4.705104] hpet_acpi_add: no address or irqs in _CRS
[ 4.705172] Non-volatile memory driver v1.3
[ 4.705374] Linux agpgart interface v0.103
[ 4.706370] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 4.706380] Hangcheck: Using getrawmonotonic().
[ 4.706420] [drm] Initialized drm 1.1.0 20060810
[ 4.713216] brd: module loaded
[ 4.715132] loop: module loaded
[ 4.715139] Compaq SMART2 Driver (v 2.6.0)
[ 4.715611] nbd: registered device at major 43
[ 4.718468] mtip32xx Version 1.2.6os3
[ 4.718543] dummy-irq: no IRQ given. Use irq=N
[ 4.718672] Guest personality initialized and is inactive
[ 4.718769] VMCI host device registered (name=vmci, major=10, minor=49)
[ 4.718777] Initialized host personality
[ 4.719196] Loading iSCSI transport class v2.0-870.
[ 4.719461] rdac: device handler registered
[ 4.719856] iscsi: registered transport (tcp)
[ 4.719864] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
[ 4.720088] scsi: <fdomain> Detection failed (no card)
[ 4.720096] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 4.720866] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 4.720880] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 4.722593] scsi0 : ahci
[ 4.722788] scsi1 : ahci
[ 4.722964] scsi2 : ahci
[ 4.723122] scsi3 : ahci
[ 4.723287] scsi4 : ahci
[ 4.723449] scsi5 : ahci
[ 4.723517] ata1: SATA max UDMA/133 abar m1024@0xdfdf8400 port 0xdfdf8500 irq 22
[ 4.723528] ata2: SATA max UDMA/133 abar m1024@0xdfdf8400 port 0xdfdf8580 irq 22
[ 4.723538] ata3: SATA max UDMA/133 abar m1024@0xdfdf8400 port 0xdfdf8600 irq 22
[ 4.723548] ata4: SATA max UDMA/133 abar m1024@0xdfdf8400 port 0xdfdf8680 irq 22
[ 4.723557] ata5: SATA max UDMA/133 abar m1024@0xdfdf8400 port 0xdfdf8700 irq 22
[ 4.723567] ata6: SATA max UDMA/133 abar m1024@0xdfdf8400 port 0xdfdf8780 irq 22
[ 4.723696] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 4.724562] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[ 4.725638] tun: Universal TUN/TAP device driver, 1.6
[ 4.725646] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.725819] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 4.725945] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013)
[ 4.726086] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
[ 4.726350] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 4.726358] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.726407] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 4.726415] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 4.726463] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 4.726469] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 4.726523] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[ 4.726531] igb: Copyright (c) 2007-2013 Intel Corporation.
[ 4.726586] pcieport 0000:00:0d.0: driver skip pci_set_master, fix it!
[ 4.726690] Already setup the GSI :17
[ 4.899427] igb 0000:02:00.0: added PHC on eth0
[ 4.899439] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 4.899450] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:25:90:d1:bd:ac
[ 4.899460] igb 0000:02:00.0: eth0: PBA No: Unknown
[ 4.899468] igb 0000:02:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 4.899582] Already setup the GSI :18
[ 5.029338] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.029399] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.073957] igb 0000:02:00.1: added PHC on eth1
[ 5.073969] igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 5.073979] igb 0000:02:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:25:90:d1:bd:ad
[ 5.073989] igb 0000:02:00.1: eth1: PBA No: Unknown
[ 5.073997] igb 0000:02:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 5.074030] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[ 5.074038] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 5.074087] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k
[ 5.074095] ixgbe: Copyright (c) 1999-2013 Intel Corporation.
[ 5.074151] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.7.12-k
[ 5.074160] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 5.074219] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 5.074227] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 5.074415] PPP generic driver version 2.4.2
[ 5.074619] PPP BSD Compression module registered
[ 5.074626] PPP Deflate Compression module registered
[ 5.074656] PPP MPPE Compression module registered
[ 5.074664] NET: Registered protocol family 24
[ 5.074679] PPTP driver version 0.8.5
[ 5.075047] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
[ 5.075055] CSLIP: code copyright 1989 Regents of the University of California.
[ 5.075062] SLIP linefill/keepalive option.
[ 5.075069] xen_netfront: Initialising Xen virtual ethernet driver
[ 5.075118] usbcore: registered new interface driver catc
[ 5.075139] usbcore: registered new interface driver kaweth
[ 5.075147] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 5.075172] usbcore: registered new interface driver pegasus
[ 5.075211] usbcore: registered new interface driver rtl8150
[ 5.075233] usbcore: registered new interface driver r8152
[ 5.075257] usbcore: registered new interface driver asix
[ 5.075278] usbcore: registered new interface driver ax88179_178a
[ 5.075300] usbcore: registered new interface driver cdc_ether
[ 5.075325] usbcore: registered new interface driver r815x
[ 5.075346] usbcore: registered new interface driver cdc_eem
[ 5.075367] usbcore: registered new interface driver dm9601
[ 5.075389] usbcore: registered new interface driver sr9700
[ 5.075415] usbcore: registered new interface driver smsc75xx
[ 5.075444] usbcore: registered new interface driver smsc95xx
[ 5.075466] usbcore: registered new interface driver gl620a
[ 5.075487] usbcore: registered new interface driver net1080
[ 5.075509] usbcore: registered new interface driver plusb
[ 5.075530] usbcore: registered new interface driver rndis_host
[ 5.075568] usbcore: registered new interface driver cdc_subset
[ 5.075595] usbcore: registered new interface driver zaurus
[ 5.075617] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 5.075646] usbcore: registered new interface driver int51x1
[ 5.075667] usbcore: registered new interface driver kalmia
[ 5.075689] usbcore: registered new interface driver ipheth
[ 5.075712] usbcore: registered new interface driver sierra_net
[ 5.075736] usbcore: registered new interface driver cx82310_eth
[ 5.075762] usbcore: registered new interface driver cdc_ncm
[ 5.075784] usbcore: registered new interface driver lg-vl600
[ 5.075806] usbcore: registered new interface driver qmi_wwan
[ 5.075828] usbcore: registered new interface driver cdc_mbim
[ 5.076919] aoe: AoE v85 initialised.
[ 5.077057] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.077065] ehci-pci: EHCI PCI platform driver
[ 5.077424] Already setup the GSI :17
[ 5.077495] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 5.077600] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ [ 5.851400] usb 7-1: New USB device found, idVendor=0557, idProduct=2221
[ 5.851414] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.851424] usb 7-1: Product: Hermon USB hidmouse Device
[ 5.851432] usb 7-1: Manufacturer: Winbond Electronics Corp
[ 6.238342] i2c i2c-0: Unsupported chip (man_id=0xFA, chip_id=0xFA).
[ 6.352535] pc87360: PC8736x not detected, module not inserted
[ 6.444516] w83627ehf: Forcibly enabling Super-I/O. Sensor is probably unusable.
[ 6.444547] w83627ehf: Found W83627DHG-P chip at 0xa10
[ 6.456517] intel_powerclamp: Intel powerclamp does not run on family 21 model 1
[ 6.456531] md: linear personality registered for level -1
[ 6.456539] md: raid0 personality registered for level 0
[ 6.456546] md: raid1 personality registered for level 1
[ 6.456552] md: raid10 personality registered for level 10
[ 6.456837] md: raid6 personality registered for level 6
[ 6.456845] md: raid5 personality registered for level 5
[ 6.456852] md: raid4 personality registered for level 4
[ 6.456859] md: multipath personality registered for level -4
[ 6.456868] md: faulty personality registered for level -5
[ 6.457924] device-mapper: uevent: version 1.0.3
[ 6.458115] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[ 6.458717] device-mapper: multipath: version 1.5.1 loaded
[ 6.458726] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 6.458734] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 6.458743] device-mapper: multipath service-time: version 0.2.0 loaded
[ 6.458827] device-mapper: dm-log-userspace: version 1.1.0 loaded
[ 6.458836] device-mapper: raid: Loading target version 1.5.2
[ 6.458860] AMD64 EDAC driver v3.4.0
[ 6.458949] EDAC amd64: DRAM ECC enabled.
[ 6.459021] EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable.
[ 6.459032] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 6.459032] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 6.459032] (Note that use of the override may cause unknown side effects.)
[ 6.459111] EDAC amd64: DRAM ECC enabled.
[ 6.459245] EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 1 to enable.
[ 6.459255] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 6.459255] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 6.459255] (Note that use of the override may cause unknown side effects.)
[ 6.459298] EDAC amd64: DRAM ECC enabled.
[ 6.459307] EDAC amd64: F15h detected (node 2).
[ 6.459547] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 6.459555] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 6.459561] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 6.459568] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 6.459577] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 6.459583] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 6.459590] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 6.459596] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 6.459602] EDAC amd64: using x8 syndromes.
[ 6.459607] EDAC amd64: MCT channel count: 2
[ 6.459659] EDAC amd64: CS2: Registered DDR3 RAM
[ 6.459669] EDAC amd64: CS3: Registered DDR3 RAM
[ 6.459862] EDAC MC2: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:1a.2
[ 6.459891] EDAC amd64: DRAM ECC enabled.
[ 6.459899] EDAC amd64: F15h detected (node 3).
[ 6.460142] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 6.460149] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 6.460155] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 6.460161] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 6.460171] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 6.460177] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 6.460183] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 6.460189] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 6.460214] EDAC amd64: using x8 syndromes.
[ 6.460221] EDAC amd64: MCT channel count: 2
[ 6.460257] EDAC amd64: CS2: Registered DDR3 RAM
[ 6.460264] EDAC amd64: CS3: Registered DDR3 RAM
[ 6.460457] EDAC MC3: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:1b.2
[ 6.461035] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.466326] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:14.5/usb7/7-1/7-1:1.0/input/input5
[ 6.466815] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:14.5-1/input0
[ 6.470171] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:14.5/usb7/7-1/7-1:1.1/input/input6
[ 6.470444] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:14.5-1/input1
[ 6.470485] usbcore: registered new interface driver usbhid
[ 6.470492] usbhid: USB HID core driver
[ 6.470619] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 6.470627] AMD IOMMUv2 functionality not available on this system
[ 6.471046] oprofile: using NMI interrupt.
[ 6.471162] GACT probability on
[ 6.471169] Mirror/redirect action on
[ 6.471176] Failed to load ipt action
[ 6.471182] Simple TC action Loaded
[ 6.471410] netem: version 1.3
[ 6.471419] u32 classifier
[ 6.471424] Actions configured
[ 6.471435] Netfilter messages via NETLINK v0.30.
[ 6.471445] nfnl_acct: registering with nfnetlink.
[ 6.471472] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 6.471692] ctnetlink v0.93: registering with nfnetlink.
[ 6.471863] xt_time: kernel timezone is -0000
[ 6.471873] ip_set: protocol 6
[ 6.471889] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[ 6.471923] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 6.471998] IPVS: Creating netns size=1976 id=0
[ 6.474945] IPVS: ipvs loaded.
[ 6.474954] IPVS: [rr] scheduler registered.
[ 6.474961] IPVS: [wrr] scheduler registered.
[ 6.474968] IPVS: [lc] scheduler registered.
[ 6.474974] IPVS: [wlc] scheduler registered.
[ 6.474985] IPVS: [lblc] scheduler registered.
[ 6.474995] IPVS: [lblcr] scheduler registered.
[ 6.475001] IPVS: [dh] scheduler registered.
[ 6.475007] IPVS: [sh] scheduler registered.
[ 6.475014] IPVS: [sed] scheduler registered.
[ 6.475020] IPVS: [nq] scheduler registered.
[ 6.475029] IPVS: ftp: loaded support on port[0] = 21
[ 6.475036] IPVS: [sip] pe registered.
[ 6.475098] ipip: IPv4 over IPv4 tunneling driver
[ 6.475311] gre: GRE over IPv4 demultiplexor driver
[ 6.475320] ip_gre: GRE over IPv4 tunneling driver
[ 6.475613] IPv4 over IPSec tunneling driver
[ 6.478095] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.478514] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 6.478555] arp_tables: (C) 2002 David S. Miller
[ 6.479163] TCP: cubic registered
[ 6.479176] Initializing XFRM netlink socket
[ 6.479416] NET: Registered protocol family 10
[ 6.480380] mip6: Mobile IPv6
[ 6.480401] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.484540] sit: IPv6 over IPv4 tunneling driver
[ 6.485033] ip6_gre: GRE over IPv6 tunneling driver
[ 6.485269] NET: Registered protocol family 17
[ 6.485290] NET: Registered protocol family 15
[ 6.487845] Bridge firewalling registered
[ 6.487866] Ebtables v2.0 registered
[ 6.493433] NET: Registered protocol family 33
[ 6.493452] Key type rxrpc registered
[ 6.493463] Key type rxrpc_s registered
[ 6.493481] 8021q: 802.1Q VLAN Support v1.8
[ 6.496078] DCCP: Activated CCID 2 (TCP-like)
[ 6.497283] sctp: Hash tables configured (established 65536 bind 65536)
[ 6.497509] NET: Registered protocol family 36
[ 6.497535] Key type dns_resolver registered
[ 6.497555] Key type ceph registered
[ 6.497798] libceph: loaded (mon/osd proto 15/24)
[ 6.497807] openvswitch: Open vSwitch switching datapath
[ 6.497987] NET: Registered protocol family 40
[ 6.498966] registered taskstats version 1
[ 6.498974] kAFS: Red Hat AFS client v0.1 registering.
[ 6.500577] Key type encrypted registered
[ 6.502662] console [netcon0] enabled
[ 6.502669] netconsole: network logging started
[ 6.503016] rtc_cmos 00:03: setting system clock to 2013-11-07 11:02:46 UTC (1383822166)
[ 6.503048] powernow-k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[ 6.503293] BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
[ 7.727650] floppy0: no floppy controllers found
[ 7.728273] scsi 0:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC24 PQ: 0 ANSI: 5
[ 7.728789] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.728811] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 7.728827] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 7.729269] scsi 1:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC24 PQ: 0 ANSI: 5
[ 7.729380] sd 0:0:0:0: [sda] Write Protect is off
[ 7.729526] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.729598] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 7.729617] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 7.729633] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 7.729963] sd 1:0:0:0: [sdb] Write Protect is off
[ 7.730023] scsi 2:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC24 PQ: 0 ANSI: 5
[ 7.730112] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.730459] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 7.730470] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 7.730508] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 7.730788] sd 2:0:0:0: [sdc] Write Protect is off
[ 7.730933] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.730967] scsi 3:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC24 PQ: 0 ANSI: 5
[ 7.731361] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 7.731378] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 7.731381] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 7.731678] sd 3:0:0:0: [sdd] Write Protect is off
[ 7.731809] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.781211] sda: sda1 sda2 sda3
[ 7.782426] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.785260] sdd: sdd1
[ 7.785529] sdc: sdc1
[ 7.786515] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 7.786534] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 7.794278] sdb: sdb1 sdb2 sdb3
[ 7.795458] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 7.795536] md: Waiting for all devices to be available before autodetect
[ 7.795550] md: If you don't use raid, use raid=noautodetect
[ 7.795895] md: Autodetecting RAID arrays.
[ 7.837396] md: invalid raid superblock magic on sda3
[ 7.837408] md: sda3 does not have a valid v0.90 superblock, not importing!
[ 7.837875] md: invalid raid superblock magic on sdd1
[ 7.837884] md: sdd1 does not have a valid v0.90 superblock, not importing!
[ 7.838293] md: invalid raid superblock magic on sdc1
[ 7.838303] md: sdc1 does not have a valid v0.90 superblock, not importing!
[ 7.885565] md: invalid raid superblock magic on sdb3
[ 7.885577] md: sdb3 does not have a valid v0.90 superblock, not importing!
[ 7.885602] md: Scanned 6 and added 2 devices.
[ 7.885609] md: autorun ...
[ 7.885614] md: considering sdb1 ...
[ 7.885626] md: adding sdb1 ...
[ 7.885636] md: adding sda1 ...
[ 7.885652] md: created md0
[ 7.885658] md: bind<sda1>
[ 7.885684] md: bind<sdb1>
[ 7.885710] md: running: <sdb1><sda1>
[ 7.886781] md/raid1:md0: active with 2 out of 2 mirrors
[ 7.886821] md0: detected capacity change from 0 to 108447858688
[ 7.886853] md: ... autorun DONE.
[ 7.909513] md0: unknown partition table
[ 7.910032] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240)
[ 7.910305] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (240)
[ 7.929941] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 7.929979] VFS: Mounted root (ext4 filesystem) readonly on device 9:0.
[ 7.969354] devtmpfs: mounted
[ 7.970819] Freeing unused kernel memory: 1076K (ffffffff82325000 - ffffffff82432000)
INIT: version 2.88 booting
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /run type tmpfs (rw,mode=0755)
Starting udevd: /sbin/udevd --daemon
[ 8.750026] udevd[354]: starting version 182
Triggering udev events: /sbin/udevadm trigger --action=add
udevd[354]: RUN+="socket:..." support will be removed from a future udev release. Please remove it from: /etc/udev/rules.d/xend.rules:1 and use libudev to subscribe to events.
udevd[354]: RUN+="socket:..." support will be removed from a future udev release. Please remove it from: /etc/udev/rules.d/xend.rules:2 and use libudev to subscribe to events.
udevd[354]: RUN+="socket:..." support will be removed from a future udev release. Please remove it from: /etc/udev/rules.d/xend.rules:3 and use libudev to subscribe to events.
[ 10.088087] md: bind<sdd1>
[ 10.105458] md: bind<sdc1>
[ 10.115634] md/raid1:md127: active with 2 out of 2 mirrors
[ 10.115715] md127: detected capacity change from 0 to 3000457494528
[ 10.131171] md127: unknown partition table
[ 10.164068] md: bind<sdb3>
[ 10.188756] md: bind<sda3>
[ 10.199111] md/raid1:md126: active with 2 out of 2 mirrors
[ 10.199166] md126: detected capacity change from 0 to 2891943051264
[ 10.228054] md126: unknown partition table
Initializing LVM (Logical Volume Manager):
Reading all physical volumes. This may take a while...
Found volume group "Storage" using metadata type lvm2
[ 10.896148] bio: create slab <bio-1> at 1
5 logical volume(s) in volume group "Storage" now active
Fuse filesystem already available.
Fuse control filesystem already available.
Setting system time from the hardware clock (UTC): Thu Nov 7 12:02:52 CET 2013
Testing root filesystem status: read-only filesystem
Checking root filesystem:
fsck from util-linux 2.21.2
/dev/md0: clean, 673128/6619136 files, 5205156/26476528 blocks
Remounting root device with read-write enabled.
[ 12.431005] EXT4-fs (md0): re-mounted. Opts: (null)
/dev/md0 on / type ext4 (rw)
Running /etc/rc.d/rc.modules -> rc.modules-3.10.12:
Module dependencies up to date (no new kernel modules found).
Checking non-root filesystems:
fsck from util-linux 2.21.2
Mounting non-root local filesystems:
tmpfs on /dev/shm type tmpfs (rw)
Using /etc/random-seed to initialize /dev/urandom.
INIT: Entering runlevel: 3
Going multiuser...
Updating shared library links: /sbin/ldconfig &
setterm: cannot force unblank: Inappropriate ioctl for device
setterm: cannot (un)set powersave mode: Inappropriate ioctl for device
Starting sysklogd daemons: /usr/sbin/syslogd /usr/sbin/klogd -c 3 -x
Updating X font indexes: /usr/bin/fc-cache -f &
Triggering udev events: /sbin/udevadm trigger --action=change
Activating IPv4 packet forwarding.
Activating IPv6 packet forwarding.
Starting OpenSSH SSH daemon: /usr/sbin/sshd
Starting NTP daemon: /usr/sbin/ntpd -g
Starting ACPI daemon: /usr/sbin/acpid
Updating MIME database: /usr/bin/update-mime-database /usr/share/mime &
Starting system message bus: /usr/bin/dbus-uuidgen --ensure ; /usr/bin/dbus-daemon --system
Updating gtk.immodules for x86_64-slackware-linux:
/usr/bin/gtk-query-immodules-2.0-64 --update-cache
Updating gtk.immodules for x86_64-slackware-linux:
/usr/bin/gtk-query-immodules-3.0-64 --update-cache
Updating gdk-pixbuf.loaders for x86_64-slackware-linux:
/usr/bin/gdk-pixbuf-query-loaders-64 --update-cache
Updating pango.modules for x86_64-slackware-linux:
/usr/bin/pango-querymodules-64 \
> /etc/pango/x86_64-slackware-linux/pango.modules
Starting gpm: /usr/sbin/gpm -m /dev/mouse -t imps2
Starting C xenstored...
Setting domain 0 name...
Starting xenconsoled...
Starting QEMU as disk backend for dom0
Welcome to Linux 3.12.0-Desman (hvc0)
(XEN) Xen BUG at msi.c:377
(XEN) ----[ Xen-4.3.1 x86_64 debug=n Not tainted ]----
(XEN) CPU: 5
(XEN) RIP: e008:[<ffff82c4c016363a>] msi_set_mask_bit+0x3a/0x100
(XEN) RFLAGS: 0000000000010002 CONTEXT: hypervisor
(XEN) rax: 0000000000000012 rbx: ffff83097792af90 rcx: ffff8308353c8000
(XEN) rdx: 00000000000000b2 rsi: 0000000000000001 rdi: ffff830835301900
(XEN) rbp: 0000000000000001 rsp: ffff8308353cfce8 r8: ffff8308353cfdd8
(XEN) r9: 0000000000000000 r10: 0000000000000001 r11: 0000000000000000
(XEN) r12: 00000000000000c9 r13: ffff82c4c02c7800 r14: 0000000000000019
(XEN) r15: ffffffffffffffff cr0: 000000008005003b cr4: 00000000000406f0
(XEN) cr3: 00000000d7c5f000 cr2: ffff880122a0bee0
(XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008
(XEN) Xen stack trace from rsp=ffff8308353cfce8:
(XEN) ffff82c4c019ced0 ffff830835301900 0000000000001900 00000000000000c9
(XEN) ffff82c4c02c7800 0000000000000019 ffffffffffffffff ffff82c4c01672f7
(XEN) ffff830835301900 ffff82c4c0164931 ffff830835301900 ffff82c4c0167869
(XEN) ffff8308352e0df0 ffff8308353cfde0 ffc0000000000286 ffff8310218717f0
(XEN) 0000000000000000 000000193cdbae07 ffff830835301924 ffff8308353cfdd8
(XEN) 0000001e00000005 ffff82c4c0300660 ffff831000000000 ffff8308353c21b0
(XEN) ffff8308353c2220 000000503cdbd3b9 00000050474cc7d5 ffff8308353c3060
(XEN) ffffffffffffffff ffff82c4c015f7a7 ffffffffffffffff ffff8308353c3060
(XEN) 00000050474cc7d5 000000503cdbd3b9 ffff8308353c2220 ffff8308353c21b0
(XEN) 0000000000000000 0000000000000001 0000000000000000 0000005014a9698b
(XEN) ffff8308353c3020 00000050474cc7d5 ffff8308353c8000 00000050474cc7d5
(XEN) ffff8308353c21d8 000000c900000000 ffff82c4c019b060 000000000000e008
(XEN) 0000000000000246 ffff8308353cfe88 0000000000000000 00000050474cc7d5
(XEN) ffff82c4c019bbdf 00000000ffffffff 00000000ffffffff 00006c990000065d
(XEN) 0000000000000000 0000000000000000 ffff830800000000 ffffffffffffffff
(XEN) ffff82c4c01245e5 0000000000000de8 ffff8308353c8000 ffff8308353c8000
(XEN) 000000503cdbae07 ffff82c4c0300660 ffff82c4c01584ce 0000000000000000
(XEN) ffff8300d7e8b000 ffff8300d7e8b000 00007fff50b06610 0000000000000de8
(XEN) 0000000000000001 0000000000000000 0000000000000000 00007ff2d04fe960
(XEN) 0000000000000000 0000000000000004 00007ff2d1d00480 0000000000000001
(XEN) Xen call trace:
(XEN) [<ffff82c4c016363a>] msi_set_mask_bit+0x3a/0x100
(XEN) [<ffff82c4c019ced0>] read_measured_perf_ctrs+0/0x30
(XEN) [<ffff82c4c01672f7>] move_native_irq+0x17/0x30
(XEN) [<ffff82c4c0164931>] ack_maskable_msi_irq+0x11/0x50
(XEN) [<ffff82c4c0167869>] do_IRQ+0xb9/0x680
(XEN) [<ffff82c4c015f7a7>] common_interrupt+0x57/0x60
(XEN) [<ffff82c4c019b060>] lapic_timer_nop+0/0x10
(XEN) [<ffff82c4c019bbdf>] acpi_processor_idle+0x1ef/0x550
(XEN) [<ffff82c4c01245e5>] __do_softirq+0x65/0xa0
(XEN) [<ffff82c4c01584ce>] idle_loop+0x1e/0x50
(XEN)
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 5:
(XEN) Xen BUG at msi.c:377
(XEN) ****************************************
(XEN)
(XEN) Manual reset required ('noreboot' specified)
[-- Attachment #3: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xen-users] Xen 4.3.1 / Linux 3.12 panic
2013-11-06 20:44 ` Konrad Rzeszutek Wilk
2013-11-07 11:20 ` Wouter de Geus
@ 2013-11-07 11:26 ` Ian Campbell
[not found] ` <20131107112013.GG7624@uil.winnipeg.nl>
2 siblings, 0 replies; 8+ messages in thread
From: Ian Campbell @ 2013-11-07 11:26 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk
Cc: xen-users, insong.liu, benv-xensource.com, jbeulich, xen-devel
On Wed, 2013-11-06 at 15:44 -0500, Konrad Rzeszutek Wilk wrote:
> On Wed, Nov 06, 2013 at 02:25:28PM +0100, Wouter de Geus wrote:
> > * Ian Campbell <Ian.Campbell@citrix.com> [2013-11-06 10:51:07 +0000]:
> >
> > > > If this turns out to be stable I'll try again with cpufreq=dom0 to see if
> > > > that's also stable. I'll report my findings if you care.
> > >
> > > Please do.
> >
> > With cpufreq=none I've been able to run through a windows 2008 installation
> > and some kernel compiles without problems. After that I rebooted with
> > cpufreq=dom0, and within 5 minutes ran into the first oops again:
>
> Is there a particular reason you had tried 'cpufreq'? Sorry if that
> was answered earlier?
I suggested it in <1383730899.26213.16.camel@kazak.uk.xensource.com> (on
xen-users only, you were CCd though) because one of the crashes was on
the hypervisor side and involved do_dbs_timer which looked (from the
file comments) to be cpufreq related.
Ian.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xen-users] Xen 4.3.1 / Linux 3.12 panic
[not found] ` <20131107112013.GG7624@uil.winnipeg.nl>
@ 2013-11-07 11:57 ` Jan Beulich
2013-11-07 13:10 ` Wouter de Geus
0 siblings, 1 reply; 8+ messages in thread
From: Jan Beulich @ 2013-11-07 11:57 UTC (permalink / raw)
To: Wouter de Geus; +Cc: Jinsong Liu, xen-devel
>>> On 07.11.13 at 12:20, Wouter de Geus <benv-xensource.com@junerules.com> wrote:
> The BIOS has the following options that I consider relevant:
> Name [Current] (Options)
> - PowerNow [Enabled]
> - C State Mode [C6] (Disabled, C6)
> - PowerCap [P-state 0] (P-state 0 through 4)
> - HPC Mode [Enabled] (Disabled, Enabled)
> - CPB Mode [Auto] (Disabled, Auto)
> - C1E Support [Enabled] (Enabled, Disabled)
>
> When I set PowerNow to disabled the C State Mode, PowerCap and HPC options
> also disappear.
> After booting with PowerNow disabled (without the cpufreq option) I tried a
> kernel compile
> twice and some heavy I/O under which the system was stable.
> So that seems to have the same effect as cpufreq=none.
>
> - With PowerNow enabled (C State Mode and HPC / CPB Mode disabled ,no cpufreq
> cmdline)
> the system also seems stable.
> - C State Mode set to C6 (HPC/CPB disabled, no cpufreq cmdline), seems
> stable.
> - HPC enabled, (CPB disabled, no cpufreq cmdline), crashed (serial console
> log attached
> as xen-crash-hpc-enabled).
Now we'd need to know what HPC actually means (it means nothing
to me in this context) - I'd have expected the PowerCap (as referring
to P-states) to be the interesting one.
In any event - with cpufreq=dom0 and no cpufreq drivers loaded
in dom0 (which as Konrad says should be the default), there
shouldn't be any P-state management.
But you being able tom suppress the problem with cpufreq=none
also suggests that quite likely there's either a problem with the
silicon, or the PowerNow driver in Xen went sufficiently much out
of date wrt newer CPUs that it's not usable anymore (it certainly
hasn't been touched in meaningful ways for quite a while). You
may have said so before, but can you confirm that under native
Linux with acpi-cpufreq (or the powernow driver) loaded, you
don't have this kind of problem? If so, could you please provide
contents of the respective sysfs nodes?
Jan
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xen-users] Xen 4.3.1 / Linux 3.12 panic
2013-11-07 11:57 ` Jan Beulich
@ 2013-11-07 13:10 ` Wouter de Geus
2013-11-07 13:15 ` Jan Beulich
0 siblings, 1 reply; 8+ messages in thread
From: Wouter de Geus @ 2013-11-07 13:10 UTC (permalink / raw)
To: Jan Beulich; +Cc: Jinsong Liu, xen-devel
[-- Attachment #1: Type: text/plain, Size: 3236 bytes --]
* Jan Beulich <JBeulich@suse.com> [2013-11-07 11:57:17 +0000]:
> > - PowerCap [P-state 0] (P-state 0 through 4)
>
> Now we'd need to know what HPC actually means (it means nothing
> to me in this context) - I'd have expected the PowerCap (as referring
> to P-states) to be the interesting one.
Would you like me to test the PowerCap setting? If so, in combination with
the other settings set to what? Note that the PowerCap setting can't be
disabled by itself. (unless P-state 4 counts as disabled?)
According to a faq on supermicro.com (this is a Supermicro board after all)
http://www.supermicro.com/Aplus/support/faqs/faq.cfm?faq=13400
---
Q: I noticed that the newer BIOS supporting AMD 6200 series CPUs have a
P-state HPC Mode option. Can you provide some info on this mode?
A: HPC mode only keeps maximum and minimum states. In system idle mode CPU
will stay at P4 state for power saving. Once CPU detects higher
activities, CPU will jump up to P0 or boost state to reduce clock ramp
up latency.
---
> In any event - with cpufreq=dom0 and no cpufreq drivers loaded
> in dom0 (which as Konrad says should be the default), there
> shouldn't be any P-state management.
I thought cpufreq=xen was the default - at least according to
http://xenbits.xen.org/docs/unstable/misc/xen-command-line.html
> But you being able tom suppress the problem with cpufreq=none
> also suggests that quite likely there's either a problem with the
> silicon, or the PowerNow driver in Xen went sufficiently much out
> of date wrt newer CPUs that it's not usable anymore (it certainly
> hasn't been touched in meaningful ways for quite a while). You
> may have said so before, but can you confirm that under native
> Linux with acpi-cpufreq (or the powernow driver) loaded, you
> don't have this kind of problem? If so, could you please provide
> contents of the respective sysfs nodes?
I started tinkering on this new machine with (Slackware's) linux 3.10.17 kernel
and had no problems whatsoever. The problems only started after booting Xen
with my new custom 3.12 kernel.
I just booted the machine with the 3.12-dom0 kernel without Xen. And rebooted
since I guess you're interested in the contents with HPC Mode enabled ;)
I've attached the output of dmesg to this email.
Not sure which sysfs nodes you're interested in though, there's:
/sys/module/acpi_cpufreq/parameters/acpi_pstate_strict (contents: 0)
Then per CPU we have /sys/devices/system/cpu/cpu0/cpufreq
with (for CPU 0):
affected_cpus -> 0
bios_limit -> 2600000
cpb -> 1
cpuinfo_cur_freq -> 2600000
cpuinfo_max_freq -> 2600000
cpuinfo_min_freq -> 1400000
cpuinfo_transition_latency -> 5000
freqdomain_cpus -> 0 1
related_cpus -> 0
scaling_available_frequencies -> 2600000 1400000
scaling_available_governors -> conservative ondemand userspace powersave performance
scaling_cur_freq -> 2600000
scaling_driver -> acpi-cpufreq
scaling_governor -> performance
scaling_max_freq -> 2600000
scaling_min_freq -> 1400000
scaling_setspeed -> <unsupported>
If there's any other entry you would like to hear please let me know :)
Meanwhile the machine is still stable after going through several kernel
compilations and some heavy I/O (just for testing).
Regards,
Wouter.
[-- Attachment #2: dmesg-3.12-native-all-enabled --]
[-- Type: text/plain, Size: 74555 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.0-Desman (root@dom0) (gcc version 4.8.2 (GCC) ) #32 SMP Wed Nov 6 11:36:57 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12 root=/dev/md0 ro
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000091fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000092000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d7e8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7e90000-0x00000000d7eb3fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d7eb4000-0x00000000d7edffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d7ee0000-0x00000000d7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000001023ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Supermicro H8DG6/H8DGi/H8DG6/H8DGi, BIOS 3.0 09/10/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1024000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000D0000000 mask FFFFF8000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000001024000000 aka 66112M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd8000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xd7e90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff88000008c000] 8c000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02559000, 0x02559fff] PGTABLE
[ 0.000000] BRK [0x0255a000, 0x0255afff] PGTABLE
[ 0.000000] BRK [0x0255b000, 0x0255bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1023e00000-0x1023ffffff]
[ 0.000000] [mem 0x1023e00000-0x1023ffffff] page 2M
[ 0.000000] BRK [0x0255c000, 0x0255cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1020000000-0x1023dfffff]
[ 0.000000] [mem 0x1020000000-0x1023dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1000000000-0x101fffffff]
[ 0.000000] [mem 0x1000000000-0x101fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xd7e8ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xd7dfffff] page 2M
[ 0.000000] [mem 0xd7e00000-0xd7e8ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0xfffffffff]
[ 0.000000] [mem 0x100000000-0xfffffffff] page 1G
[ 0.000000] ACPI: RSDP 00000000000fa650 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000d7e90100 0006C (v01 SMCI 20120910 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000d7e90290 000F4 (v04 091012 FACP2219 20120910 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000d7e906b0 07040 (v02 1BC11 1BC11000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000d7eb4000 00040
[ 0.000000] ACPI: APIC 00000000d7e90390 00158 (v02 091012 APIC2219 20120910 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000d7e904f0 0003C (v01 091012 OEMMCFG 20120910 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000d7eb4040 000BC (v01 091012 OEMB2219 20120910 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000d7e9a6b0 00038 (v01 091012 OEMHPET 20120910 MSFT 00000097)
[ 0.000000] ACPI: IVRS 00000000d7e9a6f0 000D8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SRAT 00000000d7e9a7d0 001A8 (v02 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SLIT 00000000d7e9a980 0003C (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000d7e9a9c0 01A54 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x20 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x21 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x22 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x23 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x24 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x25 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x26 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x27 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x40 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x41 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x42 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x43 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x44 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x45 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x46 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x47 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xd7ffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x1023ffffff]
[ 0.000000] NUMA: Initialized distance table, cnt=1
[ 0.000000] NUMA: Warning: node ids are out of bound, from=0 to=-1 distance=16
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xd7ffffff] -> [mem 0x00000000-0xd7ffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xd7ffffff] + [mem 0x100000000-0x1023ffffff] -> [mem 0x00000000-0x1023ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1023ffffff]
[ 0.000000] NODE_DATA [mem 0x1023ff8000-0x1023ffcfff]
[ 0.000000] [ffffea0000000000-ffffea00409fffff] PMD -> [ffff880fe3600000-ffff8810235fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1023ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00091fff]
[ 0.000000] node 0: [mem 0x00100000-0xd7e8ffff]
[ 0.000000] node 0: [mem 0x100000000-0x1023ffffff]
[ 0.000000] On node 0 totalpages: 16760353
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3985 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13755 pages used for memmap
[ 0.000000] DMA32 zone: 880272 pages, LIFO batch:31
[ 0.000000] Normal zone: 248064 pages used for memmap
[ 0.000000] Normal zone: 15876096 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x21] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x23] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x25] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x26] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x27] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x40] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x41] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x42] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x43] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x44] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x45] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x46] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x47] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x98] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x99] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x9a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x9b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x9c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x9d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x9e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x9f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 16 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] e820: [mem 0xf0000000-0xffdfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880fe3200000 s81152 r8192 d21248 u131072
[ 0.000000] pcpu-alloc: s81152 r8192 d21248 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16498449
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12 root=/dev/md0 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ cc000000
[ 0.000000] Memory: 65835532K/67041412K available (13647K kernel code, 1357K rwdata, 4580K rodata, 1076K init, 1120K bss, 1205880K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:4352 nr_irqs:936 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.001000] tsc: Fast TSC calibration using PIT
[ 0.002000] tsc: Detected 2600.216 MHz processor
[ 0.000010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.43 BogoMIPS (lpj=2600216)
[ 0.000316] pid_max: default: 32768 minimum: 301
[ 0.000522] Security Framework initialized
[ 0.005757] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
[ 0.029597] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.040528] Mount-cache hash table entries: 256
[ 0.040982] Initializing cgroup subsys devices
[ 0.041138] Initializing cgroup subsys freezer
[ 0.041285] Initializing cgroup subsys net_cls
[ 0.041442] Initializing cgroup subsys blkio
[ 0.041594] Initializing cgroup subsys perf_event
[ 0.041745] Initializing cgroup subsys net_prio
[ 0.041920] tseg: 00d7f00000
[ 0.041923] CPU: Physical Processor ID: 0
[ 0.042067] CPU: Processor Core ID: 0
[ 0.042237] mce: CPU supports 7 MCE banks
[ 0.042396] LVT offset 1 assigned for vector 0xf9
[ 0.042550] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.042550] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.042550] tlb_flushall_shift: 5
[ 0.043055] Freeing SMP alternatives memory: 56K (ffffffff82432000 - ffffffff82440000)
[ 0.044349] ACPI: Core revision 20130725
[ 0.047397] ACPI: All ACPI Tables successfully acquired
[ 0.245085] AMD-Vi: Completion-Wait loop timed out
[ 0.354794] AMD-Vi: Completion-Wait loop timed out
[ 0.464525] AMD-Vi: Completion-Wait loop timed out
[ 0.574253] AMD-Vi: Completion-Wait loop timed out
[ 0.683956] AMD-Vi: Completion-Wait loop timed out
[ 0.793661] AMD-Vi: Completion-Wait loop timed out
[ 0.903393] AMD-Vi: Completion-Wait loop timed out
[ 1.013122] AMD-Vi: Completion-Wait loop timed out
[ 1.122827] AMD-Vi: Completion-Wait loop timed out
[ 1.232536] AMD-Vi: Completion-Wait loop timed out
[ 1.538376] AMD-Vi: Completion-Wait loop timed out
[ 1.859279] AMD-Vi: Completion-Wait loop timed out
[ 2.180173] AMD-Vi: Completion-Wait loop timed out
[ 2.180332] Switched APIC routing to physical flat.
[ 2.180854] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 2.191012] smpboot: CPU0: AMD Opteron(TM) Processor 6212 (fam: 15, model: 01, stepping: 02)
[ 2.295592] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 2.295935] ... version: 0
[ 2.296079] ... bit width: 48
[ 2.296226] ... generic registers: 6
[ 2.296370] ... value mask: 0000ffffffffffff
[ 2.296518] ... max period: 00007fffffffffff
[ 2.296667] ... fixed-purpose events: 0
[ 2.296811] ... event mask: 000000000000003f
[ 2.297237] MCE: In-kernel MCE decoding enabled.
[ 2.297621] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 # 8 # 9 # 10 # 11 # 12 # 13 # 14 # 15 OK
[ 2.575246] Brought up 16 CPUs
[ 2.575394] smpboot: Total of 16 processors activated (83197.36 BogoMIPS)
[ 2.611408] devtmpfs: initialized
[ 2.619613] xor: automatically using best checksumming function:
[ 2.629241] avx : 8932.000 MB/sec
[ 2.629422] pinctrl core: initialized pinctrl subsystem
[ 2.629693] NET: Registered protocol family 16
[ 2.629954] cpuidle: using governor ladder
[ 2.630105] cpuidle: using governor menu
[ 2.630348] ACPI: bus type PCI registered
[ 2.630522] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 2.630736] dca service started, version 1.12.1
[ 2.630903] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 2.631148] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 2.644597] PCI: Using configuration type 1 for base access
[ 2.648431] bio: create slab <bio-0> at 0
[ 2.665277] raid6: sse2x1 1843 MB/s
[ 2.682258] raid6: sse2x2 7199 MB/s
[ 2.699261] raid6: sse2x4 8750 MB/s
[ 2.699407] raid6: using algorithm sse2x4 (8750 MB/s)
[ 2.699557] raid6: using ssse3x2 recovery algorithm
[ 2.699836] ACPI: Added _OSI(Module Device)
[ 2.699992] ACPI: Added _OSI(Processor Device)
[ 2.700166] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 2.700321] ACPI: Added _OSI(Processor Aggregator Device)
[ 2.701712] ACPI: EC: Look up EC in DSDT
[ 2.703180] ACPI: Executed 2 blocks of module-level executable AML code
[ 2.711956] ACPI: Interpreter enabled
[ 2.712110] ACPI: (supports S0 S5)
[ 2.712254] ACPI: Using IOAPIC for interrupt routing
[ 2.712450] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.712817] ACPI: No dock devices found.
[ 2.720349] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-03])
[ 2.720504] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 2.720745] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 2.721389] ACPI: \_SB_.PCI0.PCIE: can't evaluate _ADR (0x5)
[ 2.721594] ACPI: \_SB_.PCI0.ITPM: can't evaluate _ADR (0x5)
[ 2.721747] PCI host bridge to bus 0000:00
[ 2.721894] pci_bus 0000:00: root bus resource [bus 00-03]
[ 2.722046] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 2.722226] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 2.722386] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
[ 2.722539] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
[ 2.722698] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 2.722854] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 2.723009] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 2.723167] pci_bus 0000:00: root bus resource [mem 0xde000000-0xdfffffff]
[ 2.723325] pci_bus 0000:00: root bus resource [mem 0xdd000000-0xddffffff]
[ 2.723510] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 2.723681] pci 0000:00:00.0: [1002:5a10] type 00 class 0x060000
[ 2.723802] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 2.723920] pci 0000:00:0c.0: [1002:5a20] type 01 class 0x060400
[ 2.723956] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
[ 2.724002] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 2.724188] pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
[ 2.724224] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
[ 2.724273] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 2.724462] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 2.724482] pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
[ 2.724492] pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
[ 2.724502] pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
[ 2.724512] pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
[ 2.724522] pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
[ 2.724532] pci 0000:00:11.0: reg 0x24: [mem 0xdfdf8400-0xdfdf87ff]
[ 2.724640] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 2.724654] pci 0000:00:12.0: reg 0x10: [mem 0xdfdf7000-0xdfdf7fff]
[ 2.724754] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 2.724932] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 2.724946] pci 0000:00:12.1: reg 0x10: [mem 0xdfdf6000-0xdfdf6fff]
[ 2.725044] pci 0000:00:12.1: System wakeup disabled by ACPI
[ 2.725229] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 2.725248] pci 0000:00:12.2: reg 0x10: [mem 0xdfdf8800-0xdfdf88ff]
[ 2.725337] pci 0000:00:12.2: supports D1 D2
[ 2.725339] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 2.725386] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 2.725570] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 2.725585] pci 0000:00:13.0: reg 0x10: [mem 0xdfdfa000-0xdfdfafff]
[ 2.725682] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 2.725889] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 2.725903] pci 0000:00:13.1: reg 0x10: [mem 0xdfdf9000-0xdfdf9fff]
[ 2.725999] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 2.726184] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 2.726204] pci 0000:00:13.2: reg 0x10: [mem 0xdfdf8c00-0xdfdf8cff]
[ 2.726290] pci 0000:00:13.2: supports D1 D2
[ 2.726292] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 2.726339] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 2.726524] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 2.726676] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 2.726806] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 2.726882] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 2.727077] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 2.727091] pci 0000:00:14.5: reg 0x10: [mem 0xdfdfb000-0xdfdfbfff]
[ 2.727187] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 2.727373] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 2.727454] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 2.727518] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 2.727586] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 2.727656] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 2.727723] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 2.727792] pci 0000:00:19.0: [1022:1600] type 00 class 0x060000
[ 2.727870] pci 0000:00:19.1: [1022:1601] type 00 class 0x060000
[ 2.727938] pci 0000:00:19.2: [1022:1602] type 00 class 0x060000
[ 2.728006] pci 0000:00:19.3: [1022:1603] type 00 class 0x060000
[ 2.728078] pci 0000:00:19.4: [1022:1604] type 00 class 0x060000
[ 2.728145] pci 0000:00:19.5: [1022:1605] type 00 class 0x060000
[ 2.728217] pci 0000:00:1a.0: [1022:1600] type 00 class 0x060000
[ 2.728305] pci 0000:00:1a.1: [1022:1601] type 00 class 0x060000
[ 2.728372] pci 0000:00:1a.2: [1022:1602] type 00 class 0x060000
[ 2.728440] pci 0000:00:1a.3: [1022:1603] type 00 class 0x060000
[ 2.728514] pci 0000:00:1a.4: [1022:1604] type 00 class 0x060000
[ 2.728580] pci 0000:00:1a.5: [1022:1605] type 00 class 0x060000
[ 2.728654] pci 0000:00:1b.0: [1022:1600] type 00 class 0x060000
[ 2.728736] pci 0000:00:1b.1: [1022:1601] type 00 class 0x060000
[ 2.728803] pci 0000:00:1b.2: [1022:1602] type 00 class 0x060000
[ 2.728871] pci 0000:00:1b.3: [1022:1603] type 00 class 0x060000
[ 2.728942] pci 0000:00:1b.4: [1022:1604] type 00 class 0x060000
[ 2.729009] pci 0000:00:1b.5: [1022:1605] type 00 class 0x060000
[ 2.729120] pci 0000:03:00.0: [1000:0072] type 00 class 0x010700
[ 2.729129] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 2.729139] pci 0000:03:00.0: reg 0x14: [mem 0xdff3c000-0xdff3ffff 64bit]
[ 2.729148] pci 0000:03:00.0: reg 0x1c: [mem 0xdff40000-0xdff7ffff 64bit]
[ 2.729160] pci 0000:03:00.0: reg 0x30: [mem 0xdff80000-0xdfffffff pref]
[ 2.729194] pci 0000:03:00.0: supports D1 D2
[ 2.730281] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 2.730436] pci 0000:00:0c.0: bridge window [io 0xe000-0xefff]
[ 2.730439] pci 0000:00:0c.0: bridge window [mem 0xdff00000-0xdfffffff]
[ 2.730514] pci 0000:02:00.0: [8086:10c9] type 00 class 0x020000
[ 2.730527] pci 0000:02:00.0: reg 0x10: [mem 0xdfee0000-0xdfefffff]
[ 2.730536] pci 0000:02:00.0: reg 0x14: [mem 0xdfec0000-0xdfedffff]
[ 2.730545] pci 0000:02:00.0: reg 0x18: [io 0xd800-0xd81f]
[ 2.730554] pci 0000:02:00.0: reg 0x1c: [mem 0xdfe9c000-0xdfe9ffff]
[ 2.730576] pci 0000:02:00.0: reg 0x30: [mem 0xdfea0000-0xdfebffff pref]
[ 2.730618] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 2.730684] pci 0000:02:00.1: [8086:10c9] type 00 class 0x020000
[ 2.730696] pci 0000:02:00.1: reg 0x10: [mem 0xdfe60000-0xdfe7ffff]
[ 2.730707] pci 0000:02:00.1: reg 0x14: [mem 0xdfe40000-0xdfe5ffff]
[ 2.730743] pci 0000:02:00.1: reg 0x18: [io 0xd400-0xd41f]
[ 2.730752] pci 0000:02:00.1: reg 0x1c: [mem 0xdfe1c000-0xdfe1ffff]
[ 2.730774] pci 0000:02:00.1: reg 0x30: [mem 0xdfe20000-0xdfe3ffff pref]
[ 2.730816] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 2.732282] pci 0000:00:0d.0: PCI bridge to [bus 02]
[ 2.732437] pci 0000:00:0d.0: bridge window [io 0xd000-0xdfff]
[ 2.732441] pci 0000:00:0d.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 2.732487] pci 0000:01:04.0: [102b:0532] type 00 class 0x030000
[ 2.732509] pci 0000:01:04.0: reg 0x10: [mem 0xdd000000-0xddffffff pref]
[ 2.732522] pci 0000:01:04.0: reg 0x14: [mem 0xdeffc000-0xdeffffff]
[ 2.732534] pci 0000:01:04.0: reg 0x18: [mem 0xdf000000-0xdf7fffff]
[ 2.732678] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 2.732841] pci 0000:00:14.4: bridge window [mem 0xdef00000-0xdf7fffff]
[ 2.732846] pci 0000:00:14.4: bridge window [mem 0xdd000000-0xddffffff pref]
[ 2.732848] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 2.732850] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 2.732852] pci 0000:00:14.4: bridge window [io 0x03b0-0x03bb] (subtractive decode)
[ 2.732854] pci 0000:00:14.4: bridge window [io 0x03c0-0x03df] (subtractive decode)
[ 2.732856] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 2.732858] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 2.732860] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 2.732862] pci 0000:00:14.4: bridge window [mem 0xde000000-0xdfffffff] (subtractive decode)
[ 2.732865] pci 0000:00:14.4: bridge window [mem 0xdd000000-0xddffffff] (subtractive decode)
[ 2.732867] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 2.733689] ACPI: PCI Root Bridge [PC40] (domain 0000 [bus 40])
[ 2.733979] acpi PNP0A08:01: Requesting ACPI _OSC control (0x1d)
[ 2.734254] acpi PNP0A08:01: ACPI _OSC control (0x1d) granted
[ 2.734653] PCI host bridge to bus 0000:40
[ 2.734802] pci_bus 0000:40: root bus resource [bus 40]
[ 2.734961] pci 0000:40:00.0: [1002:5a10] type 00 class 0x060000
[ 2.735057] pci 0000:40:00.2: [1002:5a23] type 00 class 0x080600
[ 2.735245] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
[ 2.735959] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 2.736641] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 *14 15)
[ 2.737355] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 2.738034] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 *15)
[ 2.738750] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 2.739648] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 2.740333] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 2.741324] ACPI: \_SB_.PCI0: notify handler is installed
[ 2.741356] ACPI: \_SB_.PC40: notify handler is installed
[ 2.741371] Found 2 acpi root devices
[ 2.741479] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.741748] vgaarb: loaded
[ 2.741889] vgaarb: bridge control possible 0000:01:04.0
[ 2.742154] SCSI subsystem initialized
[ 2.742312] libata version 3.00 loaded.
[ 2.742329] ACPI: bus type USB registered
[ 2.742490] usbcore: registered new interface driver usbfs
[ 2.742650] usbcore: registered new interface driver hub
[ 2.742834] usbcore: registered new device driver usb
[ 2.743030] pps_core: LinuxPPS API ver. 1 registered
[ 2.743182] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.743430] PTP clock support registered
[ 2.743685] EDAC MC: Ver: 3.0.0
[ 2.744001] PCI: Using ACPI for IRQ routing
[ 2.752974] PCI: pci_cache_line_size set to 64 bytes
[ 2.752981] pci 0000:00:14.4: address space collision: [mem 0xdd000000-0xddffffff pref] conflicts with amd_iommu [??? 0xdd004000-0xdd007fff flags 0x80000000]
[ 2.753262] pci 0000:01:04.0: address space collision: [mem 0xdd000000-0xddffffff pref] conflicts with amd_iommu [??? 0xdd004000-0xdd007fff flags 0x80000000]
[ 2.753562] e820: reserve RAM buffer [mem 0x00092000-0x0009ffff]
[ 2.753565] e820: reserve RAM buffer [mem 0xd7e90000-0xd7ffffff]
[ 2.753723] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 2.754175] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 2.757456] Switched to clocksource hpet
[ 2.757809] FS-Cache: Loaded
[ 2.758034] CacheFiles: Loaded
[ 2.758206] pnp: PnP ACPI init
[ 2.758381] ACPI: bus type PNP registered
[ 2.758740] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.758824] system 00:01: [mem 0xf6000000-0xf6003fff] could not be reserved
[ 2.759008] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.759191] pnp 00:02: [dma 4]
[ 2.759214] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.759254] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.759277] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 2.759309] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.759348] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.759470] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 2.759631] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 2.759790] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.760028] system 00:08: [io 0x0ca2-0x0ca3] has been reserved
[ 2.760210] system 00:08: [io 0x0550-0x0551] has been reserved
[ 2.760365] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 2.760528] system 00:08: [io 0x040b] has been reserved
[ 2.760682] system 00:08: [io 0x04d6] has been reserved
[ 2.760836] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 2.760992] system 00:08: [io 0x0c14] has been reserved
[ 2.761145] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 2.761324] system 00:08: [io 0x0c52] has been reserved
[ 2.761483] system 00:08: [io 0x0c6c] has been reserved
[ 2.761637] system 00:08: [io 0x0c6f] has been reserved
[ 2.761791] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 2.761947] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 2.762102] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 2.762259] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 2.762415] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 2.762604] system 00:08: [io 0x0800-0x089f] could not be reserved
[ 2.762761] system 00:08: [io 0x0b00-0x0b0f] has been reserved
[ 2.762917] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 2.763073] system 00:08: [io 0x0900-0x090f] has been reserved
[ 2.763230] system 00:08: [io 0x0910-0x091f] has been reserved
[ 2.763384] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 2.763546] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 2.763704] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 2.763887] system 00:08: [mem 0xffe50000-0xffe5e05f] has been reserved
[ 2.764045] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.764249] pnp 00:09: [dma 0 disabled]
[ 2.764303] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.764507] pnp 00:0a: [dma 0 disabled]
[ 2.764574] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.764759] system 00:0b: [io 0x0a00-0x0a0f] has been reserved
[ 2.764916] system 00:0b: [io 0x0a10-0x0a1f] has been reserved
[ 2.765100] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.765272] pnp 00:0c: [dma 0 disabled]
[ 2.765324] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.765421] system 00:0d: [io 0x164e-0x164f] has been reserved
[ 2.765587] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.765668] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[ 2.765833] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.765993] pnp 00:0f: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:01:04.0 BAR 0 [mem 0x00000000-0x00ffffff pref]
[ 2.766279] pnp 00:0f: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:01:04.0 BAR 0 [mem 0x00000000-0x00ffffff pref]
[ 2.766568] system 00:0f: [mem 0xfec00000-0xffffffff] could not be reserved
[ 2.766728] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.766895] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.766977] system 00:11: [mem 0xdd004000-0xdd007fff] could not be reserved
[ 2.767137] system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.767243] pnp: PnP ACPI: found 18 devices
[ 2.767417] ACPI: bus type PNP unregistered
[ 2.774701] pci 0000:00:14.4: BAR 9: can't assign mem pref (size 0x1000000)
[ 2.774889] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 2.775044] pci 0000:00:0c.0: bridge window [io 0xe000-0xefff]
[ 2.775202] pci 0000:00:0c.0: bridge window [mem 0xdff00000-0xdfffffff]
[ 2.775364] pci 0000:00:0d.0: PCI bridge to [bus 02]
[ 2.775527] pci 0000:00:0d.0: bridge window [io 0xd000-0xdfff]
[ 2.775686] pci 0000:00:0d.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 2.775850] pci 0000:01:04.0: BAR 0: can't assign mem pref (size 0x1000000)
[ 2.776038] pci 0000:01:04.0: BAR 0: trying firmware assignment [mem 0xdd000000-0xddffffff pref]
[ 2.776283] pci 0000:01:04.0: BAR 0: [mem 0xdd000000-0xddffffff pref] conflicts with amd_iommu [??? 0xdd004000-0xdd007fff flags 0x80000000]
[ 2.776547] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 2.776705] pci 0000:00:14.4: bridge window [mem 0xdef00000-0xdf7fffff]
[ 2.776870] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[ 2.778594] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 2.778596] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 2.778598] pci_bus 0000:00: resource 6 [io 0x03b0-0x03bb]
[ 2.778600] pci_bus 0000:00: resource 7 [io 0x03c0-0x03df]
[ 2.778602] pci_bus 0000:00: resource 8 [io 0x0d00-0xffff]
[ 2.778604] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
[ 2.778606] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000dffff]
[ 2.778608] pci_bus 0000:00: resource 11 [mem 0xde000000-0xdfffffff]
[ 2.778610] pci_bus 0000:00: resource 12 [mem 0xdd000000-0xddffffff]
[ 2.778612] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff]
[ 2.778614] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 2.778616] pci_bus 0000:03: resource 1 [mem 0xdff00000-0xdfffffff]
[ 2.778618] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 2.778620] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[ 2.778622] pci_bus 0000:01: resource 1 [mem 0xdef00000-0xdf7fffff]
[ 2.778624] pci_bus 0000:01: resource 4 [io 0x0000-0x03af]
[ 2.778626] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7]
[ 2.778628] pci_bus 0000:01: resource 6 [io 0x03b0-0x03bb]
[ 2.778630] pci_bus 0000:01: resource 7 [io 0x03c0-0x03df]
[ 2.778632] pci_bus 0000:01: resource 8 [io 0x0d00-0xffff]
[ 2.778634] pci_bus 0000:01: resource 9 [mem 0x000a0000-0x000bffff]
[ 2.778636] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000dffff]
[ 2.778638] pci_bus 0000:01: resource 11 [mem 0xde000000-0xdfffffff]
[ 2.778640] pci_bus 0000:01: resource 12 [mem 0xdd000000-0xddffffff]
[ 2.778642] pci_bus 0000:01: resource 13 [mem 0xfed40000-0xfed44fff]
[ 2.778679] NET: Registered protocol family 2
[ 2.779653] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 2.782513] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.782964] TCP: Hash tables configured (established 524288 bind 65536)
[ 2.783161] TCP: reno registered
[ 2.783419] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
[ 2.783984] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
[ 2.784605] NET: Registered protocol family 1
[ 2.784928] RPC: Registered named UNIX socket transport module.
[ 2.785083] RPC: Registered udp transport module.
[ 2.785235] RPC: Registered tcp transport module.
[ 2.785396] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.800078] pci 0000:01:04.0: Boot video device
[ 3.800089] PCI: CLS 64 bytes, default 64
[ 3.800975] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 3.801131] AMD-Vi: Found IOMMU at 0000:40:00.2 cap 0x40
[ 3.801309] AMD-Vi: Interrupt remapping enabled
[ 3.801488] pci 0000:00:00.2: irq 40 for MSI/MSI-X
[ 3.801602] pci 0000:40:00.2: irq 41 for MSI/MSI-X
[ 3.809056] AMD-Vi: Lazy IO/TLB flushing enabled
[ 4.263843] AMD-Vi: Completion-Wait loop timed out
[ 4.592890] AMD-Vi: Completion-Wait loop timed out
[ 4.922387] AMD-Vi: Completion-Wait loop timed out
[ 4.922538] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.922697] software IO TLB [mem 0xd3e90000-0xd7e90000] (64MB) mapped at [ffff8800d3e90000-ffff8800d7e8ffff]
[ 4.923542] perf: AMD NB counters detected
[ 4.923805] Machine check injector initialized
[ 4.923956] LVT offset 0 assigned for vector 0x400
[ 4.924170] perf: AMD IBS detected (0x000000ff)
[ 4.925426] microcode: CPU0: patch_level=0x06000629
[ 4.925611] microcode: CPU1: patch_level=0x06000629
[ 4.925774] microcode: CPU2: patch_level=0x06000629
[ 4.925936] microcode: CPU3: patch_level=0x06000629
[ 4.926100] microcode: CPU4: patch_level=0x06000629
[ 4.926264] microcode: CPU5: patch_level=0x06000629
[ 4.926439] microcode: CPU6: patch_level=0x06000629
[ 4.926603] microcode: CPU7: patch_level=0x06000629
[ 4.926772] microcode: CPU8: patch_level=0x06000629
[ 4.926956] microcode: CPU9: patch_level=0x06000629
[ 4.927127] microcode: CPU10: patch_level=0x06000629
[ 4.927297] microcode: CPU11: patch_level=0x06000629
[ 4.927454] microcode: CPU12: patch_level=0x06000629
[ 4.927617] microcode: CPU13: patch_level=0x06000629
[ 4.927787] microcode: CPU14: patch_level=0x06000629
[ 4.927948] microcode: CPU15: patch_level=0x06000629
[ 4.928172] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.930578] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 4.930823] sha256_ssse3: Using AVX optimized SHA-256 implementation
[ 4.931070] sha512_ssse3: Using AVX optimized SHA-512 implementation
[ 4.933825] audit: initializing netlink socket (disabled)
[ 4.933992] type=2000 audit(1383827956.635:1): initialized
[ 4.940942] VFS: Disk quotas dquot_6.5.2
[ 4.941145] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.941605] DLM installed
[ 4.942104] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 4.942891] NFS: Registering the id_resolver key type
[ 4.943054] Key type id_resolver registered
[ 4.943211] Key type id_legacy registered
[ 4.943374] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 4.943789] FS-Cache: Netfs 'cifs' registered for caching
[ 4.944093] NTFS driver 2.1.30 [Flags: R/W].
[ 4.944368] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 4.944569] QNX4 filesystem 0.2.3 registered.
[ 4.944744] QNX6 filesystem 1.0.0 registered.
[ 4.944936] fuse init (API version 7.22)
[ 4.945301] NILFS version 2 loaded
[ 4.945563] ceph: loaded (mds proto 32)
[ 4.945717] msgmni has been set to 32768
[ 4.948780] NET: Registered protocol family 38
[ 4.948954] async_tx: api initialized (async)
[ 4.949105] Key type asymmetric registered
[ 4.949256] Asymmetric key parser 'x509' registered
[ 4.949457] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 4.949797] io scheduler noop registered
[ 4.949945] io scheduler deadline registered
[ 4.950147] io scheduler cfq registered (default)
[ 4.950779] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.951017] usbcore: registered new interface driver udlfb
[ 4.951196] vga16fb: initializing
[ 4.951199] vga16fb: mapped to 0xffff8800000a0000
[ 5.214786] Console: switching to colour frame buffer device 80x30
[ 5.228578] fb0: VGA16 VGA frame buffer device
[ 5.229014] ipmi message handler version 39.2
[ 5.229419] ipmi device interface
[ 5.229766] IPMI System Interface driver.
[ 5.230181] ipmi_si: probing via SMBIOS
[ 5.243680] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 5.257604] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 5.271548] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 5.328786] ipmi_si ipmi_si.0: Found new BMC (man_id: 0x00b980, prod_id: 0xbc11, dev_id: 0x20)
[ 5.358445] ipmi_si ipmi_si.0: IPMI kcs interface initialized
[ 5.375090] IPMI Watchdog: driver initialized
[ 5.390643] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 5.423535] IPMI poweroff: ATCA Detect mfg 0xB980 prod 0xBC11
[ 5.440564] IPMI poweroff: Found a chassis style poweroff function
[ 5.457549] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 5.492001] ACPI: Power Button [PWRB]
[ 5.509566] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.543741] ACPI: Power Button [PWRF]
[ 5.563563] ACPI: acpi_idle registered with cpuidle
[ 5.603770] GHES: HEST is not enabled!
[ 5.620544] ERST DBG: ERST support is disabled.
[ 5.637245] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 5.654184] xenfs: not registering filesystem on non-xen platform
[ 5.673302] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 5.711209] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 5.767090] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 5.825953] 00:0c: ttyS2 at I/O 0x3e8 (irq = 7, base_baud = 115200) is a 16550A
[ 5.867689] Initializing Nozomi driver 2.1d
[ 5.889066] Non-volatile memory driver v1.3
[ 5.910465] Linux agpgart interface v0.103
[ 5.927695] tsc: Refined TSC clocksource calibration: 2599.998 MHz
[ 5.952732] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 5.994129] Hangcheck: Using getrawmonotonic().
[ 6.014620] [drm] Initialized drm 1.1.0 20060810
[ 6.038465] brd: module loaded
[ 6.059407] loop: module loaded
[ 6.078944] Compaq SMART2 Driver (v 2.6.0)
[ 6.098697] nbd: registered device at major 43
[ 6.119171] mtip32xx Version 1.2.6os3
[ 6.138374] dummy-irq: no IRQ given. Use irq=N
[ 6.157335] Guest personality initialized and is inactive
[ 6.176463] VMCI host device registered (name=vmci, major=10, minor=55)
[ 6.195782] Initialized host personality
[ 6.215077] Loading iSCSI transport class v2.0-870.
[ 6.234323] rdac: device handler registered
[ 6.257555] iscsi: registered transport (tcp)
[ 6.276870] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
[ 6.296429] scsi: <fdomain> Detection failed (no card)
[ 6.315992] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 6.355645] ahci 0000:00:11.0: version 3.0
[ 6.355917] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 6.395373] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 6.435103] scsi0 : ahci
[ 6.453840] scsi1 : ahci
[ 6.472132] scsi2 : ahci
[ 6.490068] scsi3 : ahci
[ 6.507804] scsi4 : ahci
[ 6.525175] scsi5 : ahci
[ 6.541825] ata1: SATA max UDMA/133 abar m1024@0xdfdf8400 port 0xdfdf8500 irq 22
[ 6.575508] ata2: SATA max UDMA/133 abar m1024@0xdfdf8400 port 0xdfdf8580 irq 22
[ 6.611112] ata3: SATA max UDMA/133 abar m1024@0xdfdf8400 port 0xdfdf8600 irq 22
[ 6.648960] ata4: SATA max UDMA/133 abar m1024@0xdfdf8400 port 0xdfdf8680 irq 22
[ 6.688865] ata5: SATA max UDMA/133 abar m1024@0xdfdf8400 port 0xdfdf8700 irq 22
[ 6.730559] ata6: SATA max UDMA/133 abar m1024@0xdfdf8400 port 0xdfdf8780 irq 22
[ 6.773565] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 6.796559] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[ 6.842010] tun: Universal TUN/TAP device driver, 1.6
[ 6.864842] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 6.887649] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 6.910533] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013)
[ 6.956173] Switched to clocksource tsc
[ 6.956183] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
[ 6.956308] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 6.956309] e100: Copyright(c) 1999-2006 Intel Corporation
[ 6.956329] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 6.956329] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 6.956350] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 6.956350] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 6.956374] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[ 6.956375] igb: Copyright (c) 2007-2013 Intel Corporation.
[ 6.956408] pcieport 0000:00:0d.0: driver skip pci_set_master, fix it!
[ 6.956843] igb 0000:02:00.0: irq 42 for MSI/MSI-X
[ 6.956873] igb 0000:02:00.0: irq 43 for MSI/MSI-X
[ 6.956889] igb 0000:02:00.0: irq 44 for MSI/MSI-X
[ 6.956902] igb 0000:02:00.0: irq 45 for MSI/MSI-X
[ 6.956915] igb 0000:02:00.0: irq 46 for MSI/MSI-X
[ 6.956981] igb 0000:02:00.0: irq 47 for MSI/MSI-X
[ 6.956994] igb 0000:02:00.0: irq 48 for MSI/MSI-X
[ 6.957007] igb 0000:02:00.0: irq 49 for MSI/MSI-X
[ 6.957020] igb 0000:02:00.0: irq 50 for MSI/MSI-X
[ 7.080343] ata5: SATA link down (SStatus 0 SControl 300)
[ 7.080459] ata6: SATA link down (SStatus 0 SControl 300)
[ 7.128897] igb 0000:02:00.0: added PHC on eth0
[ 7.128898] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 7.128900] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:25:90:d1:bd:ac
[ 7.128915] igb 0000:02:00.0: eth0: PBA No: Unknown
[ 7.128917] igb 0000:02:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 7.129313] igb 0000:02:00.1: irq 51 for MSI/MSI-X
[ 7.129326] igb 0000:02:00.1: irq 52 for MSI/MSI-X
[ 7.129341] igb 0000:02:00.1: irq 53 for MSI/MSI-X
[ 7.129354] igb 0000:02:00.1: irq 54 for MSI/MSI-X
[ 7.129390] igb 0000:02:00.1: irq 55 for MSI/MSI-X
[ 7.129434] igb 0000:02:00.1: irq 56 for MSI/MSI-X
[ 7.129447] igb 0000:02:00.1: irq 57 for MSI/MSI-X
[ 7.129461] igb 0000:02:00.1: irq 58 for MSI/MSI-X
[ 7.129474] igb 0000:02:00.1: irq 59 for MSI/MSI-X
[ 7.233299] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.234321] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.234553] ata1.00: ATA-8: ST3000DM001-1CH166, CC24, max UDMA/133
[ 7.234596] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 7.235315] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.235462] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.235507] ata2.00: ATA-8: ST3000DM001-1CH166, CC24, max UDMA/133
[ 7.235511] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 7.236377] ata1.00: configured for UDMA/133
[ 7.256612] ata4.00: ATA-8: ST3000DM001-1CH166, CC24, max UDMA/133
[ 7.256670] ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 7.258780] ata4.00: configured for UDMA/133
[ 7.259090] ata2.00: configured for UDMA/133
[ 7.281076] ata3.00: ATA-8: ST3000DM001-1CH166, CC24, max UDMA/133
[ 7.281117] ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 7.304546] ata3.00: configured for UDMA/133
[ 7.304778] igb 0000:02:00.1: added PHC on eth1
[ 7.304779] igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 7.304780] igb 0000:02:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:25:90:d1:bd:ad
[ 7.304795] igb 0000:02:00.1: eth1: PBA No: Unknown
[ 7.304796] igb 0000:02:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 7.304806] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[ 7.304806] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 7.304822] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k
[ 7.304822] ixgbe: Copyright (c) 1999-2013 Intel Corporation.
[ 7.304844] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.7.12-k
[ 7.304844] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 7.304860] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 7.304861] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 7.304936] PPP generic driver version 2.4.2
[ 7.304984] PPP BSD Compression module registered
[ 7.304985] PPP Deflate Compression module registered
[ 7.305001] PPP MPPE Compression module registered
[ 7.305002] NET: Registered protocol family 24
[ 7.305007] PPTP driver version 0.8.5
[ 7.305164] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
[ 7.305164] CSLIP: code copyright 1989 Regents of the University of California.
[ 7.305164] SLIP linefill/keepalive option.
[ 7.305174] usbcore: registered new interface driver catc
[ 7.305181] usbcore: registered new interface driver kaweth
[ 7.305182] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 7.305189] usbcore: registered new interface driver pegasus
[ 7.305197] usbcore: registered new interface driver rtl8150
[ 7.305203] usbcore: registered new interface driver r8152
[ 7.305215] usbcore: registered new interface driver asix
[ 7.305222] usbcore: registered new interface driver ax88179_178a
[ 7.305230] usbcore: registered new interface driver cdc_ether
[ 7.305236] usbcore: registered new interface driver r815x
[ 7.305243] usbcore: registered new interface driver cdc_eem
[ 7.305249] usbcore: registered new interface driver dm9601
[ 7.305255] usbcore: registered new interface driver sr9700
[ 7.305264] usbcore: registered new interface driver smsc75xx
[ 7.305273] usbcore: registered new interface driver smsc95xx
[ 7.305279] usbcore: registered new interface driver gl620a
[ 7.305285] usbcore: registered new interface driver net1080
[ 7.305291] usbcore: registered new interface driver plusb
[ 7.305298] usbcore: registered new interface driver rndis_host
[ 7.305306] usbcore: registered new interface driver cdc_subset
[ 7.305312] usbcore: registered new interface driver zaurus
[ 7.305319] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 7.305327] usbcore: registered new interface driver int51x1
[ 7.305333] usbcore: registered new interface driver kalmia
[ 7.305340] usbcore: registered new interface driver ipheth
[ 7.305348] usbcore: registered new interface driver sierra_net
[ 7.305355] usbcore: registered new interface driver cx82310_eth
[ 7.305365] usbcore: registered new interface driver cdc_ncm
[ 7.305371] usbcore: registered new interface driver lg-vl600
[ 7.305378] usbcore: registered new interface driver qmi_wwan
[ 7.305386] usbcore: registered new interface driver cdc_mbim
[ 7.305934] aoe: AoE v85 initialised.
[ 7.305987] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.305988] ehci-pci: EHCI PCI platform driver
[ 7.306198] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 7.306266] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 7.306272] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 7.306307] ehci-pci 0000:00:12.2: debug port 1
[ 7.306364] ehci-pci 0000:00:12.2: irq 17, io mem 0xdfdf8800
[ 7.312228] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 7.312399] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.312401] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.312402] usb usb1: Product: EHCI Host Controller
[ 7.312403] usb usb1: Manufacturer: Linux 3.12.0-Desman ehci_hcd
[ 7.312404] usb usb1: SerialNumber: 0000:00:12.2
[ 7.312589] hub 1-0:1.0: USB hub found
[ 7.312604] hub 1-0:1.0: 6 ports detected
[ 7.313035] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 7.313096] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 7.313099] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 7.313118] ehci-pci 0000:00:13.2: debug port 1
[ 7.313182] ehci-pci 0000:00:13.2: irq 19, io mem 0xdfdf8c00
[ 7.318343] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 7.318569] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.318571] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.318572] usb usb2: Product: EHCI Host Controller
[ 7.318573] usb usb2: Manufacturer: Linux 3.12.0-Desman ehci_hcd
[ 7.318574] usb usb2: SerialNumber: 0000:00:13.2
[ 7.318709] hub 2-0:1.0: USB hub found
[ 7.318724] hub 2-0:1.0: 6 ports detected
[ 7.318999] ehci-platform: EHCI generic platform driver
[ 7.319022] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.319023] ohci-pci: OHCI PCI platform driver
[ 7.319186] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 7.319237] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 7.319272] ohci-pci 0000:00:12.0: irq 16, io mem 0xdfdf7000
[ 7.374395] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.374397] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.374398] usb usb3: Product: OHCI PCI host controller
[ 7.374400] usb usb3: Manufacturer: Linux 3.12.0-Desman ohci_hcd
[ 7.374400] usb usb3: SerialNumber: 0000:00:12.0
[ 7.374501] hub 3-0:1.0: USB hub found
[ 7.374520] hub 3-0:1.0: 3 ports detected
[ 7.374802] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 7.374840] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 7.374857] ohci-pci 0000:00:12.1: irq 16, io mem 0xdfdf6000
[ 7.429476] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.429478] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.429480] usb usb4: Product: OHCI PCI host controller
[ 7.429481] usb usb4: Manufacturer: Linux 3.12.0-Desman ohci_hcd
[ 7.429482] usb usb4: SerialNumber: 0000:00:12.1
[ 7.429627] hub 4-0:1.0: USB hub found
[ 7.429645] hub 4-0:1.0: 3 ports detected
[ 7.429953] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 7.430012] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 7.430042] ohci-pci 0000:00:13.0: irq 18, io mem 0xdfdfa000
[ 7.484419] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.484421] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.484422] usb usb5: Product: OHCI PCI host controller
[ 7.484423] usb usb5: Manufacturer: Linux 3.12.0-Desman ohci_hcd
[ 7.484424] usb usb5: SerialNumber: 0000:00:13.0
[ 7.484571] hub 5-0:1.0: USB hub found
[ 7.484593] hub 5-0:1.0: 3 ports detected
[ 7.484889] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 7.484926] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 7.484987] ohci-pci 0000:00:13.1: irq 18, io mem 0xdfdf9000
[ 7.539520] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.539522] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.539524] usb usb6: Product: OHCI PCI host controller
[ 7.539525] usb usb6: Manufacturer: Linux 3.12.0-Desman ohci_hcd
[ 7.539526] usb usb6: SerialNumber: 0000:00:13.1
[ 7.539651] hub 6-0:1.0: USB hub found
[ 7.539670] hub 6-0:1.0: 3 ports detected
[ 7.539940] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 7.539978] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 7.540017] ohci-pci 0000:00:14.5: irq 18, io mem 0xdfdfb000
[ 7.594455] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.594456] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.594457] usb usb7: Product: OHCI PCI host controller
[ 7.594459] usb usb7: Manufacturer: Linux 3.12.0-Desman ohci_hcd
[ 7.594460] usb usb7: SerialNumber: 0000:00:14.5
[ 7.594624] hub 7-0:1.0: USB hub found
[ 7.594642] hub 7-0:1.0: 2 ports detected
[ 7.594796] ohci-platform: OHCI generic platform driver
[ 7.594804] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.594892] usbcore: registered new interface driver cdc_acm
[ 7.594892] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 7.594902] usbcore: registered new interface driver cdc_wdm
[ 7.594928] usbcore: registered new interface driver usb-storage
[ 7.594964] usbcore: registered new interface driver usbserial
[ 7.594972] usbcore: registered new interface driver usbserial_generic
[ 7.594978] usbserial: USB Serial support registered for generic
[ 7.594987] usbcore: registered new interface driver ftdi_sio
[ 7.594993] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 7.595039] usbcore: registered new interface driver pl2303
[ 7.595043] usbserial: USB Serial support registered for pl2303
[ 7.595080] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 7.598951] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.599024] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.599838] mousedev: PS/2 mouse device common for all mice
[ 7.600233] usbcore: registered new interface driver synaptics_usb
[ 7.600277] rtc_cmos 00:03: RTC can wake from S4
[ 7.600535] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 7.600601] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 7.600823] rtc-test rtc-test.0: rtc core: registered test as rtc1
[ 7.600890] rtc-test rtc-test.1: rtc core: registered test as rtc2
[ 7.600905] i2c /dev entries driver
[ 7.601091] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 7.624510] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 7.640638] usbcore: registered new interface driver i2c-diolan-u2c
[ 7.640639] i2c-parport-light: adapter type unspecified
[ 7.640657] usbcore: registered new interface driver i2c-tiny-usb
[ 7.640675] pps_ldisc: PPS line discipline registered
[ 7.640698] Driver for 1-wire Dallas network protocol.
[ 7.640714] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 7.914570] applesmc: supported laptop not found!
[ 7.914572] applesmc: driver init failed (ret=-19)!
[ 7.918533] usb 7-1: new full-speed USB device number 2 using ohci-pci
[ 8.066678] usb 7-1: New USB device found, idVendor=0557, idProduct=2221
[ 8.066680] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.066681] usb 7-1: Product: Hermon USB hidmouse Device
[ 8.066683] usb 7-1: Manufacturer: Winbond Electronics Corp
[ 9.050085] floppy0: no floppy controllers found
[ 9.050355] scsi 0:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC24 PQ: 0 ANSI: 5
[ 9.050486] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 9.050487] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 9.050533] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.050547] sd 0:0:0:0: [sda] Write Protect is off
[ 9.050549] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.050570] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.050660] scsi 1:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC24 PQ: 0 ANSI: 5
[ 9.050780] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 9.050845] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 9.050846] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 9.050912] sd 1:0:0:0: [sdb] Write Protect is off
[ 9.050914] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 9.050935] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.050949] scsi 2:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC24 PQ: 0 ANSI: 5
[ 9.051080] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 9.051082] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 9.051134] sd 2:0:0:0: [sdc] Write Protect is off
[ 9.051141] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 9.051164] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.051175] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 9.051365] scsi 3:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC24 PQ: 0 ANSI: 5
[ 9.051460] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 9.051462] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 9.051489] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 9.051563] sd 3:0:0:0: [sdd] Write Protect is off
[ 9.051565] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 9.051592] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.103277] sda: sda1 sda2 sda3
[ 9.103466] sdc: sdc1
[ 9.103822] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 9.105130] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.106419] sdb: sdb1 sdb2 sdb3
[ 9.107414] sdd: sdd1
[ 9.107685] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 9.108399] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 12.205221] i2c i2c-0: Unsupported chip (man_id=0xFA, chip_id=0xFA).
[ 12.337393] pc87360: PC8736x not detected, module not inserted
[ 12.447419] w83627ehf: Forcibly enabling Super-I/O. Sensor is probably unusable.
[ 12.483886] w83627ehf: Found W83627DHG-P chip at 0xa10
[ 12.514480] intel_powerclamp: Intel powerclamp does not run on family 21 model 1
[ 12.550473] md: linear personality registered for level -1
[ 12.568744] md: raid0 personality registered for level 0
[ 12.587068] md: raid1 personality registered for level 1
[ 12.605023] md: raid10 personality registered for level 10
[ 12.622698] md: raid6 personality registered for level 6
[ 12.639780] md: raid5 personality registered for level 5
[ 12.656425] md: raid4 personality registered for level 4
[ 12.672427] md: multipath personality registered for level -4
[ 12.688042] md: faulty personality registered for level -5
[ 12.703527] device-mapper: uevent: version 1.0.3
[ 12.718590] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[ 12.749772] device-mapper: multipath: version 1.5.1 loaded
[ 12.765368] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 12.780439] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 12.795428] device-mapper: multipath service-time: version 0.2.0 loaded
[ 12.810389] device-mapper: dm-log-userspace: version 1.1.0 loaded
[ 12.825185] device-mapper: raid: Loading target version 1.5.2
[ 12.840121] AMD64 EDAC driver v3.4.0
[ 12.855228] EDAC amd64: DRAM ECC enabled.
[ 12.870241] EDAC amd64: F15h detected (node 0).
[ 12.885120] EDAC MC: DCT0 chip selects:
[ 12.885122] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 12.900054] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 12.914637] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 12.929024] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 12.943050] EDAC MC: DCT1 chip selects:
[ 12.943051] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 12.956449] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 12.969519] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 12.982158] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 12.993993] EDAC amd64: using x8 syndromes.
[ 13.005332] EDAC amd64: MCT channel count: 2
[ 13.016655] EDAC amd64: CS2: Registered DDR3 RAM
[ 13.028091] EDAC amd64: CS3: Registered DDR3 RAM
[ 13.039370] EDAC MC0: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:18.2
[ 13.063109] EDAC amd64: DRAM ECC enabled.
[ 13.075878] EDAC amd64: F15h detected (node 1).
[ 13.088409] EDAC MC: DCT0 chip selects:
[ 13.088411] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 13.100810] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 13.113010] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 13.125041] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 13.136647] EDAC MC: DCT1 chip selects:
[ 13.136648] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 13.147967] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 13.159289] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 13.170583] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 13.181839] EDAC amd64: using x8 syndromes.
[ 13.193045] EDAC amd64: MCT channel count: 2
[ 13.204118] EDAC amd64: CS2: Registered DDR3 RAM
[ 13.214857] EDAC amd64: CS3: Registered DDR3 RAM
[ 13.225605] EDAC MC1: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:19.2
[ 13.247862] EDAC amd64: DRAM ECC enabled.
[ 13.259697] EDAC amd64: F15h detected (node 2).
[ 13.271511] EDAC MC: DCT0 chip selects:
[ 13.271512] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 13.286279] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 13.299615] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 13.311594] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 13.323467] EDAC MC: DCT1 chip selects:
[ 13.323468] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 13.335367] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 13.347288] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 13.359231] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 13.371144] EDAC amd64: using x8 syndromes.
[ 13.383226] EDAC amd64: MCT channel count: 2
[ 13.394958] EDAC amd64: CS2: Registered DDR3 RAM
[ 13.405972] EDAC amd64: CS3: Registered DDR3 RAM
[ 13.416692] EDAC MC2: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:1a.2
[ 13.439063] EDAC amd64: DRAM ECC enabled.
[ 13.450876] EDAC amd64: F15h detected (node 3).
[ 13.462726] EDAC MC: DCT0 chip selects:
[ 13.462727] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 13.474590] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 13.486552] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 13.498553] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 13.510444] EDAC MC: DCT1 chip selects:
[ 13.510446] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 13.522293] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 13.534119] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 13.546080] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 13.557964] EDAC amd64: using x8 syndromes.
[ 13.569972] EDAC amd64: MCT channel count: 2
[ 13.581589] EDAC amd64: CS2: Registered DDR3 RAM
[ 13.592596] EDAC amd64: CS3: Registered DDR3 RAM
[ 13.603253] EDAC MC3: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:1b.2
[ 13.625526] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 13.650867] hidraw: raw HID events driver (C) Jiri Kosina
[ 13.667153] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:14.5/usb7/7-1/7-1:1.0/input/input7
[ 13.693913] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:14.5-1/input0
[ 13.739182] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:14.5/usb7/7-1/7-1:1.1/input/input8
[ 13.769882] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:14.5-1/input1
[ 13.817268] usbcore: registered new interface driver usbhid
[ 13.833120] usbhid: USB HID core driver
[ 13.848995] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 13.865269] AMD IOMMUv2 functionality not available on this system
[ 13.881692] oprofile: AMD IBS detected (0x000000ff)
[ 13.898155] oprofile: using NMI interrupt.
[ 13.914629] GACT probability on
[ 13.931135] Mirror/redirect action on
[ 13.947644] Failed to load ipt action
[ 13.964070] Simple TC action Loaded
[ 13.980743] netem: version 1.3
[ 13.997335] u32 classifier
[ 14.013930] Actions configured
[ 14.030651] Netfilter messages via NETLINK v0.30.
[ 14.047698] nfnl_acct: registering with nfnetlink.
[ 14.064505] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 14.080970] ctnetlink v0.93: registering with nfnetlink.
[ 14.096910] xt_time: kernel timezone is -0000
[ 14.112641] ip_set: protocol 6
[ 14.128420] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[ 14.144398] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 14.175944] IPVS: Creating netns size=1976 id=0
[ 14.192694] IPVS: ipvs loaded.
[ 14.208190] IPVS: [rr] scheduler registered.
[ 14.223183] IPVS: [wrr] scheduler registered.
[ 14.238011] IPVS: [lc] scheduler registered.
[ 14.252384] IPVS: [wlc] scheduler registered.
[ 14.266390] IPVS: [lblc] scheduler registered.
[ 14.279889] IPVS: [lblcr] scheduler registered.
[ 14.292997] IPVS: [dh] scheduler registered.
[ 14.308008] IPVS: [sh] scheduler registered.
[ 14.320434] IPVS: [sed] scheduler registered.
[ 14.332727] IPVS: [nq] scheduler registered.
[ 14.344666] IPVS: ftp: loaded support on port[0] = 21
[ 14.356861] IPVS: [sip] pe registered.
[ 14.369231] ipip: IPv4 over IPv4 tunneling driver
[ 14.381734] gre: GRE over IPv4 demultiplexor driver
[ 14.394325] ip_gre: GRE over IPv4 tunneling driver
[ 14.407053] IPv4 over IPSec tunneling driver
[ 14.420419] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.433430] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 14.446610] arp_tables: (C) 2002 David S. Miller
[ 14.459935] TCP: cubic registered
[ 14.472979] Initializing XFRM netlink socket
[ 14.486137] NET: Registered protocol family 10
[ 14.499512] mip6: Mobile IPv6
[ 14.512154] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.526228] sit: IPv6 over IPv4 tunneling driver
[ 14.538929] ip6_gre: GRE over IPv6 tunneling driver
[ 14.551470] NET: Registered protocol family 17
[ 14.563438] NET: Registered protocol family 15
[ 14.575690] Bridge firewalling registered
[ 14.587212] Ebtables v2.0 registered
[ 14.603157] NET: Registered protocol family 33
[ 14.614759] Key type rxrpc registered
[ 14.626449] Key type rxrpc_s registered
[ 14.638115] 8021q: 802.1Q VLAN Support v1.8
[ 14.651581] DCCP: Activated CCID 2 (TCP-like)
[ 14.664109] sctp: Hash tables configured (established 65536 bind 65536)
[ 14.676464] NET: Registered protocol family 36
[ 14.689008] Key type dns_resolver registered
[ 14.701616] Key type ceph registered
[ 14.714273] libceph: loaded (mon/osd proto 15/24)
[ 14.726870] openvswitch: Open vSwitch switching datapath
[ 14.739438] NET: Registered protocol family 40
[ 14.752257] registered taskstats version 1
[ 14.766464] kAFS: Red Hat AFS client v0.1 registering.
[ 14.779568] Key type encrypted registered
[ 14.793047] console [netcon0] enabled
[ 14.805504] netconsole: network logging started
[ 14.817909] rtc_cmos 00:03: setting system clock to 2013-11-07 12:39:29 UTC (1383827969)
[ 14.843332] acpi-cpufreq: overriding BIOS provided _PSD data
[ 14.862149] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 14.875557] EDD information not available.
[ 14.889181] md: Waiting for all devices to be available before autodetect
[ 14.903211] md: If you don't use raid, use raid=noautodetect
[ 14.917677] md: Autodetecting RAID arrays.
[ 14.932275] md: invalid raid superblock magic on sdc1
[ 14.946644] md: sdc1 does not have a valid v0.90 superblock, not importing!
[ 15.002625] md: invalid raid superblock magic on sda3
[ 15.017360] md: sda3 does not have a valid v0.90 superblock, not importing!
[ 15.063206] md: invalid raid superblock magic on sdd1
[ 15.078240] md: sdd1 does not have a valid v0.90 superblock, not importing!
[ 15.116911] md: invalid raid superblock magic on sdb3
[ 15.132482] md: sdb3 does not have a valid v0.90 superblock, not importing!
[ 15.148372] md: Scanned 6 and added 2 devices.
[ 15.164568] md: autorun ...
[ 15.180634] md: considering sdb1 ...
[ 15.196557] md: adding sdb1 ...
[ 15.212473] md: adding sda1 ...
[ 15.228272] md: created md0
[ 15.244016] md: bind<sda1>
[ 15.259614] md: bind<sdb1>
[ 15.274958] md: running: <sdb1><sda1>
[ 15.291307] md/raid1:md0: active with 2 out of 2 mirrors
[ 15.306953] md0: detected capacity change from 0 to 108447858688
[ 15.325450] md: ... autorun DONE.
[ 15.366565] md0: unknown partition table
[ 15.383485] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240)
[ 15.415355] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (240)
[ 15.460054] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 15.493652] VFS: Mounted root (ext4 filesystem) readonly on device 9:0.
[ 15.550995] devtmpfs: mounted
[ 15.569445] Freeing unused kernel memory: 1076K (ffffffff82325000 - ffffffff82432000)
[ 16.363734] udevd[354]: starting version 182
[ 17.630651] md: bind<sdc1>
[ 17.660658] md: bind<sdd1>
[ 17.681736] md/raid1:md127: active with 2 out of 2 mirrors
[ 17.700354] md127: detected capacity change from 0 to 3000457494528
[ 17.728575] md127: unknown partition table
[ 17.771871] md: bind<sdb3>
[ 17.799755] md: bind<sda3>
[ 17.834182] md/raid1:md126: active with 2 out of 2 mirrors
[ 17.851197] md126: detected capacity change from 0 to 2891943051264
[ 17.877871] md126: unknown partition table
[ 18.420469] bio: create slab <bio-1> at 1
[ 19.448612] EXT4-fs (md0): re-mounted. Opts: (null)
[ 24.633293] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.633298] 8021q: adding VLAN 0 to HW filter on device eth0
[ 27.672664] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 27.672937] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.767484] device ovs-system entered promiscuous mode
[ 32.778823] device br0 entered promiscuous mode
[ 35.396785] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[-- Attachment #3: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xen-users] Xen 4.3.1 / Linux 3.12 panic
2013-11-07 13:10 ` Wouter de Geus
@ 2013-11-07 13:15 ` Jan Beulich
2013-11-07 13:46 ` Wouter de Geus
0 siblings, 1 reply; 8+ messages in thread
From: Jan Beulich @ 2013-11-07 13:15 UTC (permalink / raw)
To: Wouter de Geus; +Cc: Jinsong Liu, xen-devel
>>> On 07.11.13 at 14:10, Wouter de Geus <benv-xensource.com@junerules.com> wrote:
> * Jan Beulich <JBeulich@suse.com> [2013-11-07 11:57:17 +0000]:
>
>> > - PowerCap [P-state 0] (P-state 0 through 4)
>>
>> Now we'd need to know what HPC actually means (it means nothing
>> to me in this context) - I'd have expected the PowerCap (as referring
>> to P-states) to be the interesting one.
>
> Would you like me to test the PowerCap setting? If so, in combination with
> the other settings set to what? Note that the PowerCap setting can't be
> disabled by itself. (unless P-state 4 counts as disabled?)
>
> According to a faq on supermicro.com (this is a Supermicro board after all)
> http://www.supermicro.com/Aplus/support/faqs/faq.cfm?faq=13400
> ---
> Q: I noticed that the newer BIOS supporting AMD 6200 series CPUs have a
> P-state HPC Mode option. Can you provide some info on this mode?
> A: HPC mode only keeps maximum and minimum states. In system idle mode CPU
> will stay at P4 state for power saving. Once CPU detects higher
> activities, CPU will jump up to P0 or boost state to reduce clock ramp
> up latency.
That suggests that P4 is the lowest power state (and the only low
power one in HPC mode), i.e. not meaning disabled. P0 alone would
then mean disabled afaict. And in non-HPC mode I would conclude
intermediate states are also allowed, in which case limiting the number
of states might be interesting for you to try out.
Jan
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xen-users] Xen 4.3.1 / Linux 3.12 panic
2013-11-07 13:15 ` Jan Beulich
@ 2013-11-07 13:46 ` Wouter de Geus
0 siblings, 0 replies; 8+ messages in thread
From: Wouter de Geus @ 2013-11-07 13:46 UTC (permalink / raw)
To: Jan Beulich; +Cc: Jinsong Liu, xen-devel
* Jan Beulich <JBeulich@suse.com> [2013-11-07 13:15:26 +0000]:
> That suggests that P4 is the lowest power state (and the only low
> power one in HPC mode), i.e. not meaning disabled. P0 alone would
> then mean disabled afaict. And in non-HPC mode I would conclude
> intermediate states are also allowed, in which case limiting the number
> of states might be interesting for you to try out.
Well, non-HPC mode works for me, and I don't really see the advantage
of HPC mode anyway. So as far as I'm concerned I'll leave it off.
So if there's any mode you want me to try, please be specific in what
to test and what to report and I'll try it out :)
Regards,
Wouter.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2013-11-07 13:46 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20131105131934.GB7624@uil.winnipeg.nl>
[not found] ` <20131106091247.GC7624@uil.winnipeg.nl>
[not found] ` <1383730899.26213.16.camel@kazak.uk.xensource.com>
[not found] ` <20131106102004.GD7624@uil.winnipeg.nl>
[not found] ` <1383735067.26213.65.camel@kazak.uk.xensource.com>
2013-11-06 13:25 ` [Xen-users] Xen 4.3.1 / Linux 3.12 panic Wouter de Geus
[not found] ` <20131106132526.GE7624@uil.winnipeg.nl>
2013-11-06 20:44 ` Konrad Rzeszutek Wilk
2013-11-07 11:20 ` Wouter de Geus
2013-11-07 11:26 ` Ian Campbell
[not found] ` <20131107112013.GG7624@uil.winnipeg.nl>
2013-11-07 11:57 ` Jan Beulich
2013-11-07 13:10 ` Wouter de Geus
2013-11-07 13:15 ` Jan Beulich
2013-11-07 13:46 ` Wouter de Geus
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.