From: Daniel Vetter <daniel@ffwll.ch>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 3/5] drm/i915: retrieve current fb config into new plane_config structure at init v2
Date: Fri, 15 Nov 2013 01:26:17 +0100 [thread overview]
Message-ID: <20131115002617.GL22741@phenom.ffwll.local> (raw)
In-Reply-To: <1384473865-1456-3-git-send-email-jbarnes@virtuousgeek.org>
On Thu, Nov 14, 2013 at 04:04:23PM -0800, Jesse Barnes wrote:
> Read out the current plane configuration at init time into a new
> plane_config structure. This allows us to track any existing
> framebuffers attached to the plane and potentially re-use them in our
> fbdev code for a smooth handoff.
>
> v2: update for new pitch_for_width function (Jesse)
> comment how get_plane_config works with shared fbs (Jesse)
>
> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
To me sturct intel_plane_config still looks like a copy of an
intel_framebuffer ... Imo tracking a stand-alone config struct is only
really worth it if we use it for e.g. cross checks. So not sold.
Or is there an ugly init-time depency that I'm missing?
-Daniel
> ---
> drivers/gpu/drm/i915/i915_drv.h | 3 +
> drivers/gpu/drm/i915/intel_display.c | 118 ++++++++++++++++++++++++++++++++++-
> drivers/gpu/drm/i915/intel_drv.h | 14 +++++
> 3 files changed, 133 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 6b96e91..aac58ec 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -365,6 +365,7 @@ struct drm_i915_error_state {
>
> struct intel_connector;
> struct intel_crtc_config;
> +struct intel_plane_config;
> struct intel_crtc;
> struct intel_limit;
> struct dpll;
> @@ -403,6 +404,8 @@ struct drm_i915_display_funcs {
> * fills out the pipe-config with the hw state. */
> bool (*get_pipe_config)(struct intel_crtc *,
> struct intel_crtc_config *);
> + void (*get_plane_config)(struct intel_crtc *,
> + struct intel_plane_config *);
> int (*crtc_mode_set)(struct drm_crtc *crtc,
> int x, int y,
> struct drm_framebuffer *old_fb);
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 4cab78d..81200c4 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2002,6 +2002,27 @@ unsigned long intel_gen4_compute_page_offset(int *x, int *y,
> }
> }
>
> +int intel_format_to_fourcc(int format)
> +{
> + switch (format) {
> + case DISPPLANE_8BPP:
> + return DRM_FORMAT_C8;
> + case DISPPLANE_BGRX555:
> + return DRM_FORMAT_ARGB1555;
> + case DISPPLANE_BGRX565:
> + return DRM_FORMAT_RGB565;
> + default:
> + case DISPPLANE_BGRX888:
> + return DRM_FORMAT_XRGB8888;
> + case DISPPLANE_RGBX888:
> + return DRM_FORMAT_XBGR8888;
> + case DISPPLANE_BGRX101010:
> + return DRM_FORMAT_XRGB2101010;
> + case DISPPLANE_RGBX101010:
> + return DRM_FORMAT_XBGR2101010;
> + }
> +}
> +
> static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
> int x, int y)
> {
> @@ -5474,6 +5495,86 @@ intel_framebuffer_pitch_for_width(struct drm_i915_private *dev_priv, int width,
> return ALIGN(pitch, align);
> }
>
> +static void i9xx_get_plane_config(struct intel_crtc *crtc,
> + struct intel_plane_config *plane_config)
> +{
> + struct drm_device *dev = crtc->base.dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + int pipe = crtc->pipe, plane = crtc->plane;
> + u32 val;
> +
> + val = I915_READ(DSPCNTR(plane));
> +
> + if (INTEL_INFO(dev)->gen >= 4)
> + if (val & DISPPLANE_TILED)
> + plane_config->tiled = true;
> +
> + plane_config->pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
> +
> + switch (plane_config->pixel_format) {
> + case DISPPLANE_8BPP:
> + case DISPPLANE_YUV422:
> + plane_config->bpp = 8;
> + break;
> + case DISPPLANE_BGRX555:
> + case DISPPLANE_BGRX565:
> + case DISPPLANE_BGRA555:
> + plane_config->bpp = 16;
> + break;
> + case DISPPLANE_BGRX888:
> + case DISPPLANE_BGRA888:
> + case DISPPLANE_RGBX888:
> + case DISPPLANE_RGBA888:
> + case DISPPLANE_RGBX101010:
> + case DISPPLANE_RGBA101010:
> + case DISPPLANE_BGRX101010:
> + plane_config->bpp = 32;
> + break;
> + }
> +
> + if (INTEL_INFO(dev)->gen >= 4) {
> + if (plane_config->tiled)
> + plane_config->offset = I915_READ(DSPTILEOFF(plane));
> + else
> + plane_config->offset = I915_READ(DSPLINOFF(plane));
> + plane_config->base = I915_READ(DSPSURF(plane)) & 0xfffff000;
> + } else {
> + plane_config->base = I915_READ(DSPADDR(plane));
> + }
> +
> + val = I915_READ(PIPESRC(pipe));
> + plane_config->pipe_width = ((val >> 16) & 0xfff) + 1;
> + plane_config->pipe_height = ((val >> 0) & 0xfff) + 1;
> +
> + val = I915_READ(HTOTAL(pipe));
> + plane_config->fb_width = (val & 0xffff) + 1;
> + val = I915_READ(VTOTAL(pipe));
> + plane_config->fb_height = (val & 0xffff) + 1;
> +
> + DRM_DEBUG_KMS("pipe/plane %d/%d with fb: size=%dx%d@%d, offset=%x\n",
> + pipe, plane, plane_config->fb_width,
> + plane_config->fb_height, plane_config->bpp,
> + plane_config->base);
> +
> + plane_config->pitch =
> + intel_framebuffer_pitch_for_width(dev_priv,
> + plane_config->fb_width,
> + plane_config->bpp,
> + plane_config->tiled);
> +
> + plane_config->size = ALIGN(plane_config->pitch *
> + plane_config->fb_height, PAGE_SIZE);
> + /*
> + * If the fb is shared between multiple heads, we'll just get the
> + * first one.
> + */
> + plane_config->obj =
> + i915_gem_object_create_stolen_for_preallocated(dev,
> + plane_config->base,
> + plane_config->base,
> + plane_config->size);
> +}
> +
> static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
> struct intel_crtc_config *pipe_config)
> {
> @@ -10540,6 +10641,7 @@ static void intel_init_display(struct drm_device *dev)
> dev_priv->display.update_plane = ironlake_update_plane;
> } else if (IS_VALLEYVIEW(dev)) {
> dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
> + dev_priv->display.get_plane_config = i9xx_get_plane_config;
> dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
> dev_priv->display.crtc_enable = valleyview_crtc_enable;
> dev_priv->display.crtc_disable = i9xx_crtc_disable;
> @@ -10547,6 +10649,7 @@ static void intel_init_display(struct drm_device *dev)
> dev_priv->display.update_plane = i9xx_update_plane;
> } else {
> dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
> + dev_priv->display.get_plane_config = i9xx_get_plane_config;
> dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
> dev_priv->display.crtc_enable = i9xx_crtc_enable;
> dev_priv->display.crtc_disable = i9xx_crtc_disable;
> @@ -10801,6 +10904,7 @@ void intel_modeset_suspend_hw(struct drm_device *dev)
> void intel_modeset_init(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_crtc *crtc;
> int i, j, ret;
>
> drm_mode_config_init(dev);
> @@ -10857,6 +10961,18 @@ void intel_modeset_init(struct drm_device *dev)
>
> /* Just in case the BIOS is doing something questionable. */
> intel_disable_fbc(dev);
> +
> + intel_modeset_setup_hw_state(dev, false);
> +
> + list_for_each_entry(crtc, &dev->mode_config.crtc_list,
> + base.head) {
> + if (!crtc->active)
> + continue;
> +
> + if (dev_priv->display.get_plane_config)
> + dev_priv->display.get_plane_config(crtc,
> + &crtc->plane_config);
> + }
> }
>
> static void
> @@ -11227,8 +11343,6 @@ void intel_modeset_gem_init(struct drm_device *dev)
> intel_modeset_init_hw(dev);
>
> intel_setup_overlay(dev);
> -
> - intel_modeset_setup_hw_state(dev, false);
> }
>
> void intel_modeset_cleanup(struct drm_device *dev)
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 0231281..bcc0b08 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -209,6 +209,18 @@ typedef struct dpll {
> int p;
> } intel_clock_t;
>
> +struct intel_plane_config {
> + int pixel_format; /* DRM fourcc code */
> + int bpp;
> + bool tiled;
> + int base, offset;
> + int fb_width, fb_height;
> + int pipe_width, pipe_height;
> + int pitch;
> + int size;
> + struct drm_i915_gem_object *obj;
> +};
> +
> struct intel_crtc_config {
> /**
> * quirks - bitfield with hw state readout quirks
> @@ -358,6 +370,7 @@ struct intel_crtc {
> bool cursor_visible;
>
> struct intel_crtc_config config;
> + struct intel_plane_config plane_config;
>
> uint32_t ddi_pll_sel;
>
> @@ -707,6 +720,7 @@ void hsw_enable_ips(struct intel_crtc *crtc);
> void hsw_disable_ips(struct intel_crtc *crtc);
> void intel_display_set_init_power(struct drm_device *dev, bool enable);
> int valleyview_get_vco(struct drm_i915_private *dev_priv);
> +int intel_format_to_fourcc(int format);
>
> /* intel_dp.c */
> void intel_dp_init(struct drm_device *dev, int output_reg, enum port port);
> --
> 1.8.4.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
next prev parent reply other threads:[~2013-11-15 0:25 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-15 0:04 [PATCH 1/5] drm/i915: make pitch_for_width take a tiled arg v2 Jesse Barnes
2013-11-15 0:04 ` [PATCH 2/5] drm/i915: split fb allocation and initialization v2 Jesse Barnes
2013-11-15 0:04 ` [PATCH 3/5] drm/i915: retrieve current fb config into new plane_config structure at init v2 Jesse Barnes
2013-11-15 0:26 ` Daniel Vetter [this message]
2013-11-15 0:44 ` Bob Paauwe
2013-11-15 18:11 ` Jesse Barnes
2013-11-15 0:04 ` [PATCH 4/5] drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon Jesse Barnes
2013-11-15 0:29 ` Daniel Vetter
2013-11-15 9:40 ` Chris Wilson
2013-11-15 0:04 ` [PATCH 5/5] drm/i915: don't memset the fb buffer if preallocated Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131115002617.GL22741@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jbarnes@virtuousgeek.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.