From: Magnus Damm <magnus.damm@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: linux-sh@vger.kernel.org, linus.walleij@linaro.org,
grant.likely@secretlab.ca, horms@verge.net.au,
laurent.pinchart@ideasonboard.com,
Magnus Damm <magnus.damm@gmail.com>
Subject: [PATCH 02/05 v2] gpio: rcar: Enable mask on suspend
Date: Wed, 20 Nov 2013 00:23:17 +0000 [thread overview]
Message-ID: <20131120002317.27342.34257.sendpatchset@w520> (raw)
In-Reply-To: <20131120002259.27342.35575.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Now when lazy interrupt disable has been enabled in the driver
then extend the code to set IRQCHIP_MASK_ON_SUSPEND which tells
the core that only IRQs marked as wakeups need to stay enabled
during Suspend-to-RAM.
Tested on the Lager board with GPIO-keys and Suspend-to-RAM.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
drivers/gpio/gpio-rcar.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- 0008/drivers/gpio/gpio-rcar.c
+++ work/drivers/gpio/gpio-rcar.c 2013-11-20 08:30:28.000000000 +0900
@@ -369,7 +369,8 @@ static int gpio_rcar_probe(struct platfo
irq_chip->irq_mask = gpio_rcar_irq_disable;
irq_chip->irq_unmask = gpio_rcar_irq_enable;
irq_chip->irq_set_type = gpio_rcar_irq_set_type;
- irq_chip->flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED;
+ irq_chip->flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED
+ | IRQCHIP_MASK_ON_SUSPEND;
p->irq_domain = irq_domain_add_simple(pdev->dev.of_node,
p->config.number_of_pins,
WARNING: multiple messages have this Message-ID (diff)
From: Magnus Damm <magnus.damm@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: linux-sh@vger.kernel.org, linus.walleij@linaro.org,
grant.likely@secretlab.ca, horms@verge.net.au,
laurent.pinchart@ideasonboard.com,
Magnus Damm <magnus.damm@gmail.com>
Subject: [PATCH 02/05 v2] gpio: rcar: Enable mask on suspend
Date: Wed, 20 Nov 2013 09:23:17 +0900 [thread overview]
Message-ID: <20131120002317.27342.34257.sendpatchset@w520> (raw)
In-Reply-To: <20131120002259.27342.35575.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Now when lazy interrupt disable has been enabled in the driver
then extend the code to set IRQCHIP_MASK_ON_SUSPEND which tells
the core that only IRQs marked as wakeups need to stay enabled
during Suspend-to-RAM.
Tested on the Lager board with GPIO-keys and Suspend-to-RAM.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
drivers/gpio/gpio-rcar.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- 0008/drivers/gpio/gpio-rcar.c
+++ work/drivers/gpio/gpio-rcar.c 2013-11-20 08:30:28.000000000 +0900
@@ -369,7 +369,8 @@ static int gpio_rcar_probe(struct platfo
irq_chip->irq_mask = gpio_rcar_irq_disable;
irq_chip->irq_unmask = gpio_rcar_irq_enable;
irq_chip->irq_set_type = gpio_rcar_irq_set_type;
- irq_chip->flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED;
+ irq_chip->flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED
+ | IRQCHIP_MASK_ON_SUSPEND;
p->irq_domain = irq_domain_add_simple(pdev->dev.of_node,
p->config.number_of_pins,
next prev parent reply other threads:[~2013-11-20 0:23 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-20 0:22 [PATCH 00/05] gpio: R-Car and EM GPIO update V2 Magnus Damm
2013-11-20 0:22 ` Magnus Damm
2013-11-20 0:23 ` [PATCH 01/05 v2] gpio: rcar: Use lazy disable Magnus Damm
2013-11-20 0:23 ` Magnus Damm
2013-11-20 13:34 ` Linus Walleij
2013-11-20 13:34 ` Linus Walleij
2013-11-20 0:23 ` Magnus Damm [this message]
2013-11-20 0:23 ` [PATCH 02/05 v2] gpio: rcar: Enable mask on suspend Magnus Damm
2013-11-20 13:37 ` Linus Walleij
2013-11-20 13:37 ` Linus Walleij
2013-11-20 0:23 ` [PATCH 03/05] gpio: em: Setup gpiochip->dev Magnus Damm
2013-11-20 0:23 ` Magnus Damm
2013-11-20 13:38 ` Linus Walleij
2013-11-20 13:38 ` Linus Walleij
2013-11-20 0:23 ` [PATCH 04/05 v2] gpio: em: Use lazy disable Magnus Damm
2013-11-20 0:23 ` Magnus Damm
2013-11-20 13:39 ` Linus Walleij
2013-11-20 13:39 ` Linus Walleij
2013-11-20 0:23 ` [PATCH 05/05 v2] gpio: em: Enable mask on suspend Magnus Damm
2013-11-20 0:23 ` Magnus Damm
2013-11-20 13:41 ` Linus Walleij
2013-11-20 13:41 ` Linus Walleij
2013-11-20 10:58 ` [PATCH 00/05] gpio: R-Car and EM GPIO update V2 Laurent Pinchart
2013-11-20 10:58 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131120002317.27342.34257.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=grant.likely@secretlab.ca \
--cc=horms@verge.net.au \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.