All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Erik Rull <erik.rull@rdsoftware.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
	qemu-devel@nongnu.org, Richard Henderson <rth@redhat.com>
Subject: Re: [Qemu-devel] [PULL for-1.7 v2 4/6] acpi-build: fix build on glib < 2.14
Date: Mon, 25 Nov 2013 22:59:12 +0200	[thread overview]
Message-ID: <20131125205912.GI12689@redhat.com> (raw)
In-Reply-To: <5293AF9B.8030903@rdsoftware.de>

On Mon, Nov 25, 2013 at 09:14:19PM +0100, Erik Rull wrote:
> Michael S. Tsirkin wrote:
> >g_array_get_element_size was only added in glib 2.14,
> >there's no way to find element size in with an older glib.
> >
> >Fortunately we only use a single table (linker) where element size > 1.
> >Switch element size to 1 everywhere, then we can just look at len field
> >to get table size in bytes.
> >
> >Add an assert to make sure we catch any violations of this rule.
> >
> >Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
> >Reported-by: Richard Henderson <rth@redhat.com>
> >Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> >---
> >  hw/i386/acpi-build.c         | 5 ++++-
> >  hw/i386/bios-linker-loader.c | 8 ++++----
> >  2 files changed, 8 insertions(+), 5 deletions(-)
> >
> >diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> >index 59a17df..5f36e7e 100644
> >--- a/hw/i386/acpi-build.c
> >+++ b/hw/i386/acpi-build.c
> >@@ -425,7 +425,10 @@ static inline void *acpi_data_push(GArray *table_data, unsigned size)
> >
> >  static unsigned acpi_data_len(GArray *table)
> >  {
> >-    return table->len * g_array_get_element_size(table);
> >+#if GLIB_CHECK_VERSION(2, 14, 0)
> >+    assert(g_array_get_element_size(table) == 1);
> >+#endif
> >+    return table->len;
> >  }
> >
> >  static void acpi_align_size(GArray *blob, unsigned align)
> >diff --git a/hw/i386/bios-linker-loader.c b/hw/i386/bios-linker-loader.c
> >index 0833853..fd23611 100644
> >--- a/hw/i386/bios-linker-loader.c
> >+++ b/hw/i386/bios-linker-loader.c
> >@@ -90,7 +90,7 @@ enum {
> >
> >  GArray *bios_linker_loader_init(void)
> >  {
> >-    return g_array_new(false, true /* clear */, sizeof(BiosLinkerLoaderEntry));
> >+    return g_array_new(false, true /* clear */, 1);
> >  }
> >
> >  /* Free linker wrapper and return the linker array. */
> >@@ -115,7 +115,7 @@ void bios_linker_loader_alloc(GArray *linker,
> >                                      BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH);
> >
> >      /* Alloc entries must come first, so prepend them */
> >-    g_array_prepend_val(linker, entry);
> >+    g_array_prepend_vals(linker, &entry, sizeof entry);
> >  }
> >
> >  void bios_linker_loader_add_checksum(GArray *linker, const char *file,
> >@@ -132,7 +132,7 @@ void bios_linker_loader_add_checksum(GArray *linker, const char *file,
> >      entry.cksum.start = cpu_to_le32((uint8_t *)start - (uint8_t *)table);
> >      entry.cksum.length = cpu_to_le32(size);
> >
> >-    g_array_append_val(linker, entry);
> >+    g_array_append_vals(linker, &entry, sizeof entry);
> >  }
> >
> >  void bios_linker_loader_add_pointer(GArray *linker,
> >@@ -154,5 +154,5 @@ void bios_linker_loader_add_pointer(GArray *linker,
> >      assert(pointer_size == 1 || pointer_size == 2 ||
> >             pointer_size == 4 || pointer_size == 8);
> >
> >-    g_array_append_val(linker, entry);
> >+    g_array_append_vals(linker, &entry, sizeof entry);
> >  }
> >
> 
> Hi all,
> 
> acpi-build.c has another occurence of g_array_get_element_size in
> acpi_align_size. Please put another ifdef for the older glib here,
> too.
> 
> Thanks.
> 
> Best regards,
> 
> Erik
> 

Do you have a system where this fails then?

  reply	other threads:[~2013-11-25 20:56 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-25 11:48 [Qemu-devel] [PULL for-1.7 v2 0/5] pc very last minute fixes for 1.7 Michael S. Tsirkin
2013-11-25 11:48 ` [Qemu-devel] [PULL for-1.7 v2 1/6] s390x: fix flat file load on 32 bit systems Michael S. Tsirkin
2013-11-25 11:48 ` [Qemu-devel] [PULL for-1.7 v2 2/6] pci: unregister vmstate_pcibus on unplug Michael S. Tsirkin
2013-11-25 11:48 ` [Qemu-devel] [PULL for-1.7 v2 3/6] acpi-build: fix build on glib < 2.22 Michael S. Tsirkin
2013-11-25 20:24   ` Richard Henderson
2013-11-25 20:31     ` Michael S. Tsirkin
2013-11-25 20:37       ` Richard Henderson
2013-11-25 20:54         ` Michael S. Tsirkin
2013-11-25 21:15           ` Laszlo Ersek
2013-11-25 21:22             ` Eric Blake
2013-11-25 21:18           ` Richard Henderson
2013-11-25 21:26             ` Michael S. Tsirkin
2013-11-25 21:02         ` Michael S. Tsirkin
2013-11-25 21:21           ` Richard Henderson
2013-11-25 21:33             ` Michael S. Tsirkin
2013-11-25 21:57               ` Laszlo Ersek
2013-11-25 11:48 ` [Qemu-devel] [PULL for-1.7 v2 4/6] acpi-build: fix build on glib < 2.14 Michael S. Tsirkin
2013-11-25 20:14   ` Erik Rull
2013-11-25 20:59     ` Michael S. Tsirkin [this message]
2013-11-25 21:01     ` Michael S. Tsirkin
2013-11-25 21:47       ` Richard Henderson
2013-11-25 22:41         ` Erik Rull
2013-11-25 20:26   ` Richard Henderson
2013-11-25 11:48 ` [Qemu-devel] [PULL for-1.7 v2 5/6] Revert "e1000/rtl8139: update HMP NIC when every bit is written" Michael S. Tsirkin
2013-11-25 11:48 ` [Qemu-devel] [PULL for-1.7 v2 6/6] configure: make --iasl option actually work Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131125205912.GI12689@redhat.com \
    --to=mst@redhat.com \
    --cc=erik.rull@rdsoftware.de \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.