From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/5] mfd: max14577: Add max14577 MFD driver core
Date: Wed, 27 Nov 2013 13:18:15 +0000 [thread overview]
Message-ID: <20131127131815.GI3296@lee--X1> (raw)
In-Reply-To: <1385135469-27044-2-git-send-email-k.kozlowski@samsung.com>
On Fri, 22 Nov 2013, Krzysztof Kozlowski wrote:
> From: Chanwoo Choi <cw00.choi@samsung.com>
>
> This patch adds max14577 core/irq driver to support MUIC(Micro USB IC)
> device and charger device and support irq domain method to control
> internal interrupt of max14577 device. Also, this patch supports DT
> binding with max14577_i2c_parse_dt().
>
> The MAXIM 14577 chip contains Micro-USB Interface Circuit and Li+ Battery
> Charger. It contains accessory and USB charger detection logic. It supports
> USB 2.0 Hi-Speed, UART and stereo audio signals over Micro-USB connector.
>
> The battery charger is compliant with the USB Battery Charging Specification
> Revision 1.1. It has also SFOUT LDO output for powering USB devices.
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> Reviewed-by: Mark Brown <broonie@linaro.org>
> ---
> drivers/mfd/Kconfig | 13 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/max14577.c | 243 +++++++++++++++++++++++++
> include/linux/mfd/max14577-private.h | 330 ++++++++++++++++++++++++++++++++++
> include/linux/mfd/max14577.h | 69 +++++++
> 5 files changed, 656 insertions(+)
> create mode 100644 drivers/mfd/max14577.c
> create mode 100644 include/linux/mfd/max14577-private.h
> create mode 100644 include/linux/mfd/max14577.h
Applied, thanks.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Krzysztof Kozlowski
<k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Cc: MyungJoo Ham
<myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Anton Vorontsov <anton-9xeibp6oKSgdnm+yROfE0A@public.gmane.org>,
David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Grant Likely
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Rob Landley <rob-VoJi6FS/r0vR7s880joybQ@public.gmane.org>,
linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Bartlomiej Zolnierkiewicz
<b.zolnierkie-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Marek Szyprowski
<m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Kyungmin Park
<kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Subject: Re: [PATCH v4 1/5] mfd: max14577: Add max14577 MFD driver core
Date: Wed, 27 Nov 2013 13:18:15 +0000 [thread overview]
Message-ID: <20131127131815.GI3296@lee--X1> (raw)
In-Reply-To: <1385135469-27044-2-git-send-email-k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
On Fri, 22 Nov 2013, Krzysztof Kozlowski wrote:
> From: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>
> This patch adds max14577 core/irq driver to support MUIC(Micro USB IC)
> device and charger device and support irq domain method to control
> internal interrupt of max14577 device. Also, this patch supports DT
> binding with max14577_i2c_parse_dt().
>
> The MAXIM 14577 chip contains Micro-USB Interface Circuit and Li+ Battery
> Charger. It contains accessory and USB charger detection logic. It supports
> USB 2.0 Hi-Speed, UART and stereo audio signals over Micro-USB connector.
>
> The battery charger is compliant with the USB Battery Charging Specification
> Revision 1.1. It has also SFOUT LDO output for powering USB devices.
>
> Signed-off-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Kyungmin Park <kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Reviewed-by: Mark Brown <broonie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
> drivers/mfd/Kconfig | 13 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/max14577.c | 243 +++++++++++++++++++++++++
> include/linux/mfd/max14577-private.h | 330 ++++++++++++++++++++++++++++++++++
> include/linux/mfd/max14577.h | 69 +++++++
> 5 files changed, 656 insertions(+)
> create mode 100644 drivers/mfd/max14577.c
> create mode 100644 include/linux/mfd/max14577-private.h
> create mode 100644 include/linux/mfd/max14577.h
Applied, thanks.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Samuel Ortiz <sameo@linux.intel.com>,
Anton Vorontsov <anton@enomsg.org>,
David Woodhouse <dwmw2@infradead.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Grant Likely <grant.likely@linaro.org>,
Rob Herring <rob.herring@calxeda.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Pawel Moll <pawel.moll@arm.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Rob Landley <rob@landley.net>,
linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>
Subject: Re: [PATCH v4 1/5] mfd: max14577: Add max14577 MFD driver core
Date: Wed, 27 Nov 2013 13:18:15 +0000 [thread overview]
Message-ID: <20131127131815.GI3296@lee--X1> (raw)
In-Reply-To: <1385135469-27044-2-git-send-email-k.kozlowski@samsung.com>
On Fri, 22 Nov 2013, Krzysztof Kozlowski wrote:
> From: Chanwoo Choi <cw00.choi@samsung.com>
>
> This patch adds max14577 core/irq driver to support MUIC(Micro USB IC)
> device and charger device and support irq domain method to control
> internal interrupt of max14577 device. Also, this patch supports DT
> binding with max14577_i2c_parse_dt().
>
> The MAXIM 14577 chip contains Micro-USB Interface Circuit and Li+ Battery
> Charger. It contains accessory and USB charger detection logic. It supports
> USB 2.0 Hi-Speed, UART and stereo audio signals over Micro-USB connector.
>
> The battery charger is compliant with the USB Battery Charging Specification
> Revision 1.1. It has also SFOUT LDO output for powering USB devices.
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> Reviewed-by: Mark Brown <broonie@linaro.org>
> ---
> drivers/mfd/Kconfig | 13 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/max14577.c | 243 +++++++++++++++++++++++++
> include/linux/mfd/max14577-private.h | 330 ++++++++++++++++++++++++++++++++++
> include/linux/mfd/max14577.h | 69 +++++++
> 5 files changed, 656 insertions(+)
> create mode 100644 drivers/mfd/max14577.c
> create mode 100644 include/linux/mfd/max14577-private.h
> create mode 100644 include/linux/mfd/max14577.h
Applied, thanks.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2013-11-27 13:18 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-22 15:51 [PATCH v4 0/5] mfd: max14577: Add max14577 MFD drivers Krzysztof Kozlowski
2013-11-22 15:51 ` Krzysztof Kozlowski
2013-11-22 15:51 ` [PATCH v4 1/5] mfd: max14577: Add max14577 MFD driver core Krzysztof Kozlowski
2013-11-22 15:51 ` Krzysztof Kozlowski
2013-11-22 15:51 ` Krzysztof Kozlowski
2013-11-27 13:18 ` Lee Jones [this message]
2013-11-27 13:18 ` Lee Jones
2013-11-27 13:18 ` Lee Jones
2013-11-22 15:51 ` [PATCH v4 2/5] extcon: max14577: Add extcon-max14577 driver to support MUIC device Krzysztof Kozlowski
2013-11-22 15:51 ` Krzysztof Kozlowski
2013-11-28 3:53 ` Chanwoo Choi
2013-11-28 3:53 ` Chanwoo Choi
2013-11-22 15:51 ` [PATCH v4 3/5] charger: max14577: Add charger support for Maxim 14577 Krzysztof Kozlowski
2013-11-22 15:51 ` Krzysztof Kozlowski
2013-11-22 15:51 ` [PATCH v4 4/5] regulator: max14577: Add regulator driver " Krzysztof Kozlowski
2013-11-22 15:51 ` Krzysztof Kozlowski
2013-11-27 13:16 ` Lee Jones
2013-11-27 13:16 ` Lee Jones
2013-11-22 15:51 ` [PATCH v4 5/5] mfd: max14577: Add device tree bindings document Krzysztof Kozlowski
2013-11-22 15:51 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131127131815.GI3296@lee--X1 \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.