[PATCH 03/14 v2] hostap-daemon-wl18xx: Update recipe to ol_r8.a8.08 version

* [PATCH 03/14 v2] hostap-daemon-wl18xx: Update recipe to ol_r8.a8.08 version
@ 2013-12-02 14:08 Yaniv Mahani
  2013-12-02 15:00 ` Cooper Jr., Franklin
  2013-12-04  6:35 ` Denys Dmytriyenko
  0 siblings, 2 replies; 3+ messages in thread
From: Yaniv Mahani @ 2013-12-02 14:08 UTC (permalink / raw)
  To: meta-arago

From: Yaniv Machani <yanivma@ti.com>

- Build hostap-daemon from TI_Openlink ol_r8.a8.08
- Add missing includes for building with libnl3.
- Adjusted configuration files.

Signed-off-by: Yaniv Machani <yanivma@ti.com>
---
 ...d-change-conf-file-for-better-oob-startup.patch | 1089 +++++++++++++++++++-
 ...8.a6.01.bb => hostap-daemon-wl18xx_r8.a8.08.bb} |    6 +-
 .../hostap/hostap-daemon/defconfig                 |   42 +-
 .../recipes-connectivity/hostap/hostap.inc         |    3 +-
 4 files changed, 1101 insertions(+), 39 deletions(-)
 copy meta-arago-extras/recipes-connectivity/hostap/{hostap-daemon-wl18xx_r8.a6.01.bb => hostap-daemon-wl18xx_r8.a8.08.bb} (84%)

diff --git a/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon-wl18xx/0001-hostapd-change-conf-file-for-better-oob-startup.patch b/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon-wl18xx/0001-hostapd-change-conf-file-for-better-oob-startup.patch
index 824d250..aee4531 100644
--- a/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon-wl18xx/0001-hostapd-change-conf-file-for-better-oob-startup.patch
+++ b/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon-wl18xx/0001-hostapd-change-conf-file-for-better-oob-startup.patch
@@ -1,40 +1,1093 @@
-From f7c1b9d4e18dc650dd0b9da97a91f27f6a4bb5b7 Mon Sep 17 00:00:00 2001
-From: Eyal Reizer <eyalr@ti.com>
-Date: Sun, 17 Mar 2013 07:18:55 -0700
-Subject: [PATCH] hostapd: change conf file for better sdk out of box startup
+From 0649cc8f954a957a32180dc714ab4226503c5a66 Mon Sep 17 00:00:00 2001
+From: Yaniv Mahani <yanivma@ti.com>
+Date: Wed, 27 Nov 2013 13:43:55 +0200
+Subject: [PATCH] hostapd change conf file for better oob startup
 
-Change the default channel to 6 and change the ssid to a more
-meaningful name.
-
-Upstream-status: inappropriate [SDK specific patch]
-
-Signed-off-by: Eyal Reizer <eyalr@ti.com>
+Changed some of the default parameters
 ---
- hostapd/hostapd.conf |    4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
+ hostapd/hostapd.conf |  726 +++++++-------------------------------------------
+ 1 file changed, 89 insertions(+), 637 deletions(-)
 
 diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
-index f71a881..00843aa 100644
+index f26f310..162fc28 100644
 --- a/hostapd/hostapd.conf
 +++ b/hostapd/hostapd.conf
-@@ -83,7 +83,7 @@ ctrl_interface_group=0
+@@ -1,9 +1,23 @@
+ ##### hostapd configuration file ##############################################
+ # Empty lines and lines starting with # are ignored
++#
++# Copyright (C) {2011} Texas Instruments Incorporated - http://www.ti.com/
++#
++# Licensed under the Apache License, Version 2.0 (the "License");
++# you may not use this file except in compliance with the License.
++# You may obtain a copy of the License at
++#
++# 	http://www.apache.org/licenses/LICENSE-2.0
++#
++# Unless required by applicable law or agreed to in writing, software
++# distributed under the License is distributed on an "AS IS" BASIS,
++# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
++# See the License for the specific language governing permissions and
++# limitations under the License.
+
+ # AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for
+ # management frames); ath0 for madwifi
+-interface=wlan0
++interface=wlan1
+
+ # In case of madwifi, atheros, and nl80211 driver interfaces, an additional
+ # configuration parameter, bridge, may be used to notify hostapd if the
+@@ -22,7 +36,7 @@ interface=wlan0
+ # default: hostap). nl80211 is used with all Linux mac80211 drivers.
+ # Use driver=none if building hostapd as a standalone RADIUS server that does
+ # not control any wireless/wired driver.
+-# driver=hostap
++driver=nl80211
+
+ # hostapd event logger configuration
+ #
+@@ -50,10 +64,8 @@ logger_syslog=-1
+ logger_syslog_level=2
+ logger_stdout=-1
+ logger_stdout_level=2
+-
+ # Dump file for state information (on SIGUSR1)
+-dump_file=/tmp/hostapd.dump
+-
++dump_file=/var/run/hostapd.dump
+ # Interface for separate control program. If this is specified, hostapd
+ # will create this directory and a UNIX domain socket for listening to requests
+ # from external programs (CLI/GUI, etc.) for status information and
+@@ -63,7 +75,6 @@ dump_file=/tmp/hostapd.dump
+ # /var/run/hostapd is the recommended directory for sockets and by default,
+ # hostapd_cli will use it when trying to connect with hostapd.
+ ctrl_interface=/var/run/hostapd
+-
+ # Access control for the control interface can be configured by setting the
+ # directory to allow only members of a group to use sockets. This way, it is
+ # possible to run hostapd as root (since it needs to change network
+@@ -77,13 +88,12 @@ ctrl_interface=/var/run/hostapd
+ #
+ # This variable can be a group name or gid.
+ #ctrl_interface_group=wheel
+-ctrl_interface_group=0
+-
+
  ##### IEEE 802.11 related configuration #######################################
  
  # SSID to be used in IEEE 802.11 management frames
 -ssid=test
 +ssid=TexasInstruments_0001
- 
++
+ # Alternative formats for configuring SSID
+ # (double quoted string, hexdump, printf-escaped string)
+ #ssid2="test"
+@@ -93,27 +103,25 @@ ssid=test
  # Country code (ISO/IEC 3166-1). Used to set regulatory domain.
  # Set as needed to indicate country in which device is operating.
-@@ -107,7 +107,7 @@ hw_mode=g
+ # This can limit available channels and transmit power.
+-#country_code=US
++country_code=US
+
+ # Enable IEEE 802.11d. This advertises the country_code and the set of allowed
+ # channels and transmit power levels based on the regulatory limits. The
+ # country_code setting must be configured with the correct country for
+ # IEEE 802.11d functions.
+ # (default: 0 = disabled)
+-#ieee80211d=1
++ieee80211d=1
+
+ # Operation mode (a = IEEE 802.11a, b = IEEE 802.11b, g = IEEE 802.11g,
+ # Default: IEEE 802.11b
+ hw_mode=g
+-
+ # Channel number (IEEE 802.11)
+ # (default: 0, i.e., not set)
+ # Please note that some drivers do not use this value from hostapd and the
  # channel will need to be configured separately with iwconfig.
  # When set to 0, automatic channel selection will be engaged. A channel
  # will be selected from the desired hw_mode.
 -channel=1
-+channel=6
- 
+-
++channel=11
  # Automatic channel selection (ACS) whitelist
  # (default: not set)
+ # Allow only these channels in automatic channel selection
+@@ -123,39 +131,34 @@ channel=1
+ # (default: not set)
+ # Don't allow these channels in automatic channel selection
+ # acs_blacklist=1 2 3 4 5 6 7 8 9 10 11
+-
+ # Sync channel to previous operational APs
+ # (default: 0)
+ # Set to 1 in order to sync the channel of the current AP to the
+ # channel of an operational radio on the same PHY. Note that this
+ # applies to the 40Mhz operating channel (primary + secondary)
+-#ap_channel_sync=0
++ap_channel_sync=1
+
+ # Beacon interval in kus (1.024 ms) (default: 100; range 15..65535)
+ beacon_int=100
+-
+ # DTIM (delivery traffic information message) period (range 1..255):
+ # number of beacons between DTIMs (1 = every beacon includes DTIM element)
+ # (default: 2)
+ dtim_period=2
+-
+ # Maximum number of stations allowed in station table. New stations will be
+ # rejected after the station table is full. IEEE 802.11 has a limit of 2007
+ # different association IDs, so this number should not be larger than that.
+ # (default: 2007)
+-max_num_sta=255
+-
++max_num_sta=10
+ # RTS/CTS threshold; 2347 = disabled (default); range 0..2347
+ # If this field is not included in hostapd.conf, hostapd will not control
+ # RTS threshold and 'iwconfig wlan# rts <val>' can be used to set it.
+-rts_threshold=2347
++#rts_threshold=2347
+
+ # Fragmentation threshold; 2346 = disabled (default); range 256..2346
+ # If this field is not included in hostapd.conf, hostapd will not control
+ # fragmentation threshold and 'iwconfig wlan# frag <val>' can be used to set
+ # it.
+-fragm_threshold=2346
+-
++#fragm_threshold=2346
+ # Rate configuration
+ # Default is to enable all rates supported by the hardware. This configuration
+ # item allows this list be filtered so that only the listed rates will be left
+@@ -167,14 +170,14 @@ fragm_threshold=2346
+ # default: use the most common supported rate setting for the selected
+ # hw_mode (i.e., this line can be removed from configuration file in most
+ # cases)
+-#supported_rates=10 20 55 110 60 90 120 180 240 360 480 540
+-
++supported_rates=10 20 55 110 60 90 120 180 240 360 480 540
+ # Basic rate set configuration
+ # List of rates (in 100 kbps) that are included in the basic rate set.
+ # If this item is not included, usually reasonable default set is used.
+ #basic_rates=10 20
+ #basic_rates=10 20 55 110
+ #basic_rates=60 120 240
++basic_rates=10 20 55 110 60 120 240
+
+ # Short Preamble
+ # This parameter can be used to enable optional use of short preamble for
+@@ -185,8 +188,7 @@ fragm_threshold=2346
+ # disabled (and enabled when such STAs disassociate) dynamically.
+ # 0 = do not allow use of short preamble (default)
+ # 1 = allow use of short preamble
+-#preamble=1
+-
++preamble=1
+ # Station MAC address -based authentication
+ # Please note that this kind of access control requires a driver that uses
+ # hostapd to take care of management frame processing and as such, this can be
+@@ -195,7 +197,6 @@ fragm_threshold=2346
+ # 1 = deny unless in accept list
+ # 2 = use external RADIUS server (accept/deny lists are searched first)
+ macaddr_acl=0
+-
+ # Accept/deny lists are read from separate files (containing list of
+ # MAC addresses, one per line). Use absolute path name to make sure that the
+ # files can be read on SIGHUP configuration reloads.
+@@ -209,7 +210,6 @@ macaddr_acl=0
+ # bit 0 = Open System Authentication
+ # bit 1 = Shared Key Authentication (requires WEP)
+ auth_algs=3
+-
+ # Send empty SSID in beacons and ignore probe request frames that do not
+ # specify full SSID, i.e., require stations to know SSID.
+ # default: disabled (0)
+@@ -219,14 +219,12 @@ auth_algs=3
+ #     with some clients that do not support empty SSID) and ignore probe
+ #     requests for broadcast SSID
+ ignore_broadcast_ssid=0
+-
+ # Additional vendor specfic elements for Beacon and Probe Response frames
+ # This parameter can be used to add additional vendor specific element(s) into
+ # the end of the Beacon and Probe Response frames. The format for these
+ # element(s) is a hexdump of the raw information elements (id+len+payload for
+ # one or more elements)
+ #vendor_elements=dd0411223301
+-
+ # TX queue parameters (EDCF / bursting)
+ # tx_queue_<queue name>_<param>
+ # queues: data0, data1, data2, data3, after_beacon, beacon
+@@ -243,31 +241,31 @@ ignore_broadcast_ssid=0
+ # to the clients.
+ #
+ # Low priority / AC_BK = background
+-#tx_queue_data3_aifs=7
+-#tx_queue_data3_cwmin=15
+-#tx_queue_data3_cwmax=1023
+-#tx_queue_data3_burst=0
++tx_queue_data3_aifs=7
++tx_queue_data3_cwmin=15
++tx_queue_data3_cwmax=1023
++tx_queue_data3_burst=0
+ # Note: for IEEE 802.11b mode: cWmin=31 cWmax=1023 burst=0
+ #
+ # Normal priority / AC_BE = best effort
+-#tx_queue_data2_aifs=3
+-#tx_queue_data2_cwmin=15
+-#tx_queue_data2_cwmax=63
+-#tx_queue_data2_burst=0
++tx_queue_data2_aifs=3
++tx_queue_data2_cwmin=15
++tx_queue_data2_cwmax=63
++tx_queue_data2_burst=0
+ # Note: for IEEE 802.11b mode: cWmin=31 cWmax=127 burst=0
+ #
+ # High priority / AC_VI = video
+-#tx_queue_data1_aifs=1
+-#tx_queue_data1_cwmin=7
+-#tx_queue_data1_cwmax=15
+-#tx_queue_data1_burst=3.0
++tx_queue_data1_aifs=1
++tx_queue_data1_cwmin=7
++tx_queue_data1_cwmax=15
++tx_queue_data1_burst=3.0
+ # Note: for IEEE 802.11b mode: cWmin=15 cWmax=31 burst=6.0
+ #
+ # Highest priority / AC_VO = voice
+-#tx_queue_data0_aifs=1
+-#tx_queue_data0_cwmin=3
+-#tx_queue_data0_cwmax=7
+-#tx_queue_data0_burst=1.5
++tx_queue_data0_aifs=1
++tx_queue_data0_cwmin=3
++tx_queue_data0_cwmax=7
++tx_queue_data0_burst=1.5
+ # Note: for IEEE 802.11b mode: cWmin=7 cWmax=15 burst=3.3
+
+ # 802.1D Tag (= UP) to AC mappings
+@@ -298,42 +296,42 @@ ignore_broadcast_ssid=0
+ # note - here cwMin and cmMax are in exponent form. the actual cw value used
+ # will be (2^n)-1 where n is the value given here
+ #
+-wmm_enabled=1
++wme_enabled=1
+ #
+ # WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD]
+ # Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver)
+-#uapsd_advertisement_enabled=1
++uapsd_advertisement_enabled=1
+ #
+ # Low priority / AC_BK = background
+-wmm_ac_bk_cwmin=4
+-wmm_ac_bk_cwmax=10
+-wmm_ac_bk_aifs=7
+-wmm_ac_bk_txop_limit=0
+-wmm_ac_bk_acm=0
++wme_ac_bk_cwmin=4
++wme_ac_bk_cwmax=10
++wme_ac_bk_aifs=7
++wme_ac_bk_txop_limit=0
++wme_ac_bk_acm=0
+ # Note: for IEEE 802.11b mode: cWmin=5 cWmax=10
+ #
+ # Normal priority / AC_BE = best effort
+-wmm_ac_be_aifs=3
+-wmm_ac_be_cwmin=4
+-wmm_ac_be_cwmax=10
+-wmm_ac_be_txop_limit=0
+-wmm_ac_be_acm=0
++wme_ac_be_aifs=3
++wme_ac_be_cwmin=4
++wme_ac_be_cwmax=10
++wme_ac_be_txop_limit=0
++wme_ac_be_acm=0
+ # Note: for IEEE 802.11b mode: cWmin=5 cWmax=7
+ #
+ # High priority / AC_VI = video
+-wmm_ac_vi_aifs=2
+-wmm_ac_vi_cwmin=3
+-wmm_ac_vi_cwmax=4
+-wmm_ac_vi_txop_limit=94
+-wmm_ac_vi_acm=0
++wme_ac_vi_aifs=2
++wme_ac_vi_cwmin=3
++wme_ac_vi_cwmax=4
++wme_ac_vi_txop_limit=94
++wme_ac_vi_acm=0
+ # Note: for IEEE 802.11b mode: cWmin=4 cWmax=5 txop_limit=188
+ #
+ # Highest priority / AC_VO = voice
+-wmm_ac_vo_aifs=2
+-wmm_ac_vo_cwmin=2
+-wmm_ac_vo_cwmax=3
+-wmm_ac_vo_txop_limit=47
+-wmm_ac_vo_acm=0
++wme_ac_vo_aifs=2
++wme_ac_vo_cwmin=2
++wme_ac_vo_cwmax=3
++wme_ac_vo_txop_limit=47
++wme_ac_vo_acm=0
+ # Note: for IEEE 802.11b mode: cWmin=3 cWmax=4 burst=102
+
+ # Static WEP key configuration
+@@ -353,7 +351,6 @@ wmm_ac_vo_acm=0
+ #wep_key1="vwxyz"
+ #wep_key2=0102030405060708090a0b0c0d
+ #wep_key3=".2.4.6.8.0.23"
+-
+ # Station inactivity limit
+ #
+ # If a station does not send anything in ap_max_inactivity seconds, an
+@@ -369,7 +366,7 @@ wmm_ac_vo_acm=0
+ # disassociation frame is not sent immediately without first polling
+ # the STA with a data frame.
+ # default: 300 (i.e., 5 minutes)
+-#ap_max_inactivity=300
++ap_max_inactivity=10000
+ #
+ # The inactivity polling can be disabled to disconnect stations based on
+ # inactivity timeout so that idle stations are more likely to be disconnected
+@@ -380,7 +377,7 @@ wmm_ac_vo_acm=0
+ # Disassociate stations based on excessive transmission failures or other
+ # indications of connection loss. This depends on the driver capabilities and
+ # may not be available with all drivers.
+-#disassoc_low_ack=1
++disassoc_low_ack=1
+
+ # Maximum allowed Listen Interval (how many Beacon periods STAs are allowed to
+ # remain asleep). Default: 65535 (no limit apart from field size)
+@@ -400,14 +397,13 @@ wmm_ac_vo_acm=0
+ # Client isolation can be used to prevent low-level bridging of frames between
+ # associated stations in the BSS. By default, this bridging is allowed.
+ #ap_isolate=1
+-
+ ##### IEEE 802.11n related configuration ######################################
+
+ # ieee80211n: Whether IEEE 802.11n (HT) is enabled
+ # 0 = disabled (default)
+ # 1 = enabled
+ # Note: You will also need to enable WMM for full HT functionality.
+-#ieee80211n=1
++ieee80211n=1
+
+ # ht_capab: HT capabilities (list of flags)
+ # LDPC coding capability: [LDPC] = supported
+@@ -442,162 +438,10 @@ wmm_ac_vo_acm=0
+ # DSSS/CCK Mode in 40 MHz: [DSSS_CCK-40] = allowed (not allowed if not set)
+ # PSMP support: [PSMP] (disabled if not set)
+ # L-SIG TXOP protection support: [LSIG-TXOP-PROT] (disabled if not set)
+-#ht_capab=[HT40-][SHORT-GI-20][SHORT-GI-40]
++ht_capab=[SHORT-GI-20][GF]
+
+ # Require stations to support HT PHY (reject association if they do not)
+ #require_ht=1
+-
+-##### IEEE 802.11ac related configuration #####################################
+-
+-# ieee80211ac: Whether IEEE 802.11ac (VHT) is enabled
+-# 0 = disabled (default)
+-# 1 = enabled
+-# Note: You will also need to enable WMM for full VHT functionality.
+-#ieee80211ac=1
+-
+-# vht_capab: VHT capabilities (list of flags)
+-#
+-# vht_max_mpdu_len: [MAX-MPDU-7991] [MAX-MPDU-11454]
+-# Indicates maximum MPDU length
+-# 0 = 3895 octets (default)
+-# 1 = 7991 octets
+-# 2 = 11454 octets
+-# 3 = reserved
+-#
+-# supported_chan_width: [VHT160] [VHT160-80PLUS80]
+-# Indicates supported Channel widths
+-# 0 = 160 MHz & 80+80 channel widths are not supported (default)
+-# 1 = 160 MHz channel width is supported
+-# 2 = 160 MHz & 80+80 channel widths are supported
+-# 3 = reserved
+-#
+-# Rx LDPC coding capability: [RXLDPC]
+-# Indicates support for receiving LDPC coded pkts
+-# 0 = Not supported (default)
+-# 1 = Supported
+-#
+-# Short GI for 80 MHz: [SHORT-GI-80]
+-# Indicates short GI support for reception of packets transmitted with TXVECTOR
+-# params format equal to VHT and CBW = 80Mhz
+-# 0 = Not supported (default)
+-# 1 = Supported
+-#
+-# Short GI for 160 MHz: [SHORT-GI-160]
+-# Indicates short GI support for reception of packets transmitted with TXVECTOR
+-# params format equal to VHT and CBW = 160Mhz
+-# 0 = Not supported (default)
+-# 1 = Supported
+-#
+-# Tx STBC: [TX-STBC-2BY1]
+-# Indicates support for the transmission of at least 2x1 STBC
+-# 0 = Not supported (default)
+-# 1 = Supported
+-#
+-# Rx STBC: [RX-STBC-1] [RX-STBC-12] [RX-STBC-123] [RX-STBC-1234]
+-# Indicates support for the reception of PPDUs using STBC
+-# 0 = Not supported (default)
+-# 1 = support of one spatial stream
+-# 2 = support of one and two spatial streams
+-# 3 = support of one, two and three spatial streams
+-# 4 = support of one, two, three and four spatial streams
+-# 5,6,7 = reserved
+-#
+-# SU Beamformer Capable: [SU-BEAMFORMER]
+-# Indicates support for operation as a single user beamformer
+-# 0 = Not supported (default)
+-# 1 = Supported
+-#
+-# SU Beamformee Capable: [SU-BEAMFORMEE]
+-# Indicates support for operation as a single user beamformee
+-# 0 = Not supported (default)
+-# 1 = Supported
+-#
+-# Compressed Steering Number of Beamformer Antennas Supported: [BF-ANTENNA-2]
+-#   Beamformee's capability indicating the maximum number of beamformer
+-#   antennas the beamformee can support when sending compressed beamforming
+-#   feedback
+-# If SU beamformer capable, set to maximum value minus 1
+-# else reserved (default)
+-#
+-# Number of Sounding Dimensions: [SOUNDING-DIMENSION-2]
+-# Beamformer's capability indicating the maximum value of the NUM_STS parameter
+-# in the TXVECTOR of a VHT NDP
+-# If SU beamformer capable, set to maximum value minus 1
+-# else reserved (default)
+-#
+-# MU Beamformer Capable: [MU-BEAMFORMER]
+-# Indicates support for operation as an MU beamformer
+-# 0 = Not supported or sent by Non-AP STA (default)
+-# 1 = Supported
+-#
+-# MU Beamformee Capable: [MU-BEAMFORMEE]
+-# Indicates support for operation as an MU beamformee
+-# 0 = Not supported or sent by AP (default)
+-# 1 = Supported
+-#
+-# VHT TXOP PS: [VHT-TXOP-PS]
+-# Indicates whether or not the AP supports VHT TXOP Power Save Mode
+-#  or whether or not the STA is in VHT TXOP Power Save mode
+-# 0 = VHT AP doesnt support VHT TXOP PS mode (OR) VHT Sta not in VHT TXOP PS
+-#  mode
+-# 1 = VHT AP supports VHT TXOP PS mode (OR) VHT Sta is in VHT TXOP power save
+-#  mode
+-#
+-# +HTC-VHT Capable: [HTC-VHT]
+-# Indicates whether or not the STA supports receiving a VHT variant HT Control
+-# field.
+-# 0 = Not supported (default)
+-# 1 = supported
+-#
+-# Maximum A-MPDU Length Exponent: [MAX-A-MPDU-LEN-EXP0]..[MAX-A-MPDU-LEN-EXP7]
+-# Indicates the maximum length of A-MPDU pre-EOF padding that the STA can recv
+-# This field is an integer in the range of 0 to 7.
+-# The length defined by this field is equal to
+-# 2 pow(13 + Maximum A-MPDU Length Exponent) -1 octets
+-#
+-# VHT Link Adaptation Capable: [VHT-LINK-ADAPT2] [VHT-LINK-ADAPT3]
+-# Indicates whether or not the STA supports link adaptation using VHT variant
+-# HT Control field
+-# If +HTC-VHTcapable is 1
+-#  0 = (no feedback) if the STA does not provide VHT MFB (default)
+-#  1 = reserved
+-#  2 = (Unsolicited) if the STA provides only unsolicited VHT MFB
+-#  3 = (Both) if the STA can provide VHT MFB in response to VHT MRQ and if the
+-#      STA provides unsolicited VHT MFB
+-# Reserved if +HTC-VHTcapable is 0
+-#
+-# Rx Antenna Pattern Consistency: [RX-ANTENNA-PATTERN]
+-# Indicates the possibility of Rx antenna pattern change
+-# 0 = Rx antenna pattern might change during the lifetime of an association
+-# 1 = Rx antenna pattern does not change during the lifetime of an association
+-#
+-# Tx Antenna Pattern Consistency: [TX-ANTENNA-PATTERN]
+-# Indicates the possibility of Tx antenna pattern change
+-# 0 = Tx antenna pattern might change during the lifetime of an association
+-# 1 = Tx antenna pattern does not change during the lifetime of an association
+-#vht_capab=[SHORT-GI-80][HTC-VHT]
+-#
+-# Require stations to support VHT PHY (reject association if they do not)
+-#require_vht=1
+-
+-# 0 = 20 or 40 MHz operating Channel width
+-# 1 = 80 MHz channel width
+-# 2 = 160 MHz channel width
+-# 3 = 80+80 MHz channel width
+-#vht_oper_chwidth=1
+-#
+-# center freq = 5 GHz + (5 * index)
+-# So index 42 gives center freq 5.210 GHz
+-# which is channel 42 in 5G band
+-#
+-#vht_oper_centr_freq_seg0_idx=42
+-#
+-# center freq = 5 GHz + (5 * index)
+-# So index 159 gives center freq 5.795 GHz
+-# which is channel 159 in 5G band
+-#
+-#vht_oper_centr_freq_seg1_idx=159
+-
+ ##### IEEE 802.1X-2004 related configuration ##################################
+
+ # Require IEEE 802.1X authorization
+@@ -625,11 +469,10 @@ wmm_ac_vo_acm=0
+ #wep_key_len_broadcast=5
+ #wep_key_len_unicast=5
+ # Rekeying period in seconds. 0 = do not rekey (i.e., set keys only once)
+-#wep_rekey_period=300
+-
++wep_rekey_period=0
+ # EAPOL-Key index workaround (set bit7) for WinXP Supplicant (needed only if
+ # only broadcast keys are used)
+-eapol_key_index_workaround=0
++#eapol_key_index_workaround=0
+
+ # EAP reauthentication period in seconds (default: 3600 seconds; 0 = disable
+ # reauthentication).
+@@ -640,7 +483,6 @@ eapol_key_index_workaround=0
+ # mechanism used in wired authentication, but it also requires that the port
+ # is only used by one station.
+ #use_pae_group_addr=1
+-
+ ##### Integrated EAP server ###################################################
+
+ # Optionally, hostapd can be configured to use an integrated EAP server
+@@ -651,8 +493,7 @@ eapol_key_index_workaround=0
+ # Use integrated EAP server instead of external RADIUS authentication
+ # server. This is also needed if hostapd is configured to act as a RADIUS
+ # authentication server.
+-eap_server=0
+-
++eap_server=1
+ # Path for EAP server user database
+ # If SQLite support is included, this can be set to "sqlite:/path/to/sqlite.db"
+ # to use SQLite database instead of a text file.
+@@ -757,21 +598,12 @@ eap_server=0
+ # connect. Note: This is only used with EAP-TTLS and EAP-FAST. If any other
+ # EAP method is enabled, the peer will be allowed to connect without TNC.
+ #tnc=1
+-
+-
+-##### IEEE 802.11f - Inter-Access Point Protocol (IAPP) #######################
+-
+-# Interface to be used for IAPP broadcast packets
+-#iapp_interface=eth0
+-
+-
+ ##### RADIUS client configuration #############################################
+ # for IEEE 802.1X with external Authentication Server, IEEE 802.11
+ # authentication with external ACL for MAC addresses, and accounting
+
+ # The own IP address of the access point (used as NAS-IP-Address)
+ own_ip_addr=127.0.0.1
+-
+ # Optional NAS-Identifier string for RADIUS messages. When used, this should be
+ # a unique to the NAS within the scope of the RADIUS server. For example, a
+ # fully qualified domain name can be used here.
+@@ -922,8 +754,6 @@ own_ip_addr=127.0.0.1
+
+ # Use IPv6 with RADIUS server (IPv4 will also be supported using IPv6 API)
+ #radius_server_ipv6=1
+-
+-
+ ##### WPA/IEEE 802.11i configuration ##########################################
+
+ # Enable WPA. Setting this variable configures the AP to require WPA (either
+@@ -982,23 +812,18 @@ own_ip_addr=127.0.0.1
+ #wpa_pairwise=TKIP CCMP
+ # Pairwise cipher for RSN/WPA2 (default: use wpa_pairwise value)
+ #rsn_pairwise=CCMP
+-
+ # Time interval for rekeying GTK (broadcast/multicast encryption keys) in
+ # seconds. (dot11RSNAConfigGroupRekeyTime)
+-#wpa_group_rekey=600
+-
++wpa_group_rekey=0
+ # Rekey GTK when any STA that possesses the current GTK is leaving the BSS.
+ # (dot11RSNAConfigGroupRekeyStrict)
+ #wpa_strict_rekey=1
+-
+ # Time interval for rekeying GMK (master key used internally to generate GTKs
+ # (in seconds).
+-#wpa_gmk_rekey=86400
+-
++wpa_gmk_rekey=0
+ # Maximum lifetime for PTK in seconds. This can be used to enforce rekeying of
+ # PTK to mitigate some attacks against TKIP deficiencies.
+-#wpa_ptk_rekey=600
+-
++wpa_ptk_rekey=0
+ # Enable IEEE 802.11i/RSN/WPA2 pre-authentication. This is used to speed up
+ # roaming be pre-authenticating IEEE 802.1X/EAP part of the full RSN
+ # authentication and key handshake before actually associating with a new AP.
+@@ -1050,55 +875,6 @@ own_ip_addr=127.0.0.1
+ # 0 = disabled (default)
+ # 1 = enabled
+ #okc=1
+-
+-
+-##### IEEE 802.11r configuration ##############################################
+-
+-# Mobility Domain identifier (dot11FTMobilityDomainID, MDID)
+-# MDID is used to indicate a group of APs (within an ESS, i.e., sharing the
+-# same SSID) between which a STA can use Fast BSS Transition.
+-# 2-octet identifier as a hex string.
+-#mobility_domain=a1b2
+-
+-# PMK-R0 Key Holder identifier (dot11FTR0KeyHolderID)
+-# 1 to 48 octet identifier.
+-# This is configured with nas_identifier (see RADIUS client section above).
+-
+-# Default lifetime of the PMK-RO in minutes; range 1..65535
+-# (dot11FTR0KeyLifetime)
+-#r0_key_lifetime=10000
+-
+-# PMK-R1 Key Holder identifier (dot11FTR1KeyHolderID)
+-# 6-octet identifier as a hex string.
+-#r1_key_holder=000102030405
+-
+-# Reassociation deadline in time units (TUs / 1.024 ms; range 1000..65535)
+-# (dot11FTReassociationDeadline)
+-#reassociation_deadline=1000
+-
+-# List of R0KHs in the same Mobility Domain
+-# format: <MAC address> <NAS Identifier> <128-bit key as hex string>
+-# This list is used to map R0KH-ID (NAS Identifier) to a destination MAC
+-# address when requesting PMK-R1 key from the R0KH that the STA used during the
+-# Initial Mobility Domain Association.
+-#r0kh=02:01:02:03:04:05 r0kh-1.example.com 000102030405060708090a0b0c0d0e0f
+-#r0kh=02:01:02:03:04:06 r0kh-2.example.com 00112233445566778899aabbccddeeff
+-# And so on.. One line per R0KH.
+-
+-# List of R1KHs in the same Mobility Domain
+-# format: <MAC address> <R1KH-ID> <128-bit key as hex string>
+-# This list is used to map R1KH-ID to a destination MAC address when sending
+-# PMK-R1 key from the R0KH. This is also the list of authorized R1KHs in the MD
+-# that can request PMK-R1 keys.
+-#r1kh=02:01:02:03:04:05 02:11:22:33:44:55 000102030405060708090a0b0c0d0e0f
+-#r1kh=02:01:02:03:04:06 02:11:22:33:44:66 00112233445566778899aabbccddeeff
+-# And so on.. One line per R1KH.
+-
+-# Whether PMK-R1 push is enabled at R0KH
+-# 0 = do not push PMK-R1 to all configured R1KHs (default)
+-# 1 = push PMK-R1 to all configured R1KHs whenever a new PMK-R0 is derived
+-#pmk_r1_push=1
+-
+ ##### Neighbor table ##########################################################
+ # Maximum number of entries kept in AP table (either for neigbor table or for
+ # detecting Overlapping Legacy BSS Condition). The oldest entry will be
+@@ -1106,36 +882,29 @@ own_ip_addr=127.0.0.1
+ # limit. Note! WFA certification for IEEE 802.11g requires that OLBC is
+ # enabled, so this field should not be set to 0 when using IEEE 802.11g.
+ # default: 255
+-#ap_table_max_size=255
+-
++ap_table_max_size=255
+ # Number of seconds of no frames received after which entries may be deleted
+ # from the AP table. Since passive scanning is not usually performed frequently
+ # this should not be set to very small value. In addition, there is no
+ # guarantee that every scan cycle will receive beacon frames from the
+ # neighboring APs.
+ # default: 60
+-#ap_table_expiration_time=3600
+-
+-
++ap_table_expiration_time=60
+ ##### Wi-Fi Protected Setup (WPS) #############################################
+-
+ # WPS state
+ # 0 = WPS disabled (default)
+ # 1 = WPS enabled, not configured
+ # 2 = WPS enabled, configured
+-#wps_state=2
+-
++wps_state=2
+ # AP can be configured into a locked state where new WPS Registrar are not
+ # accepted, but previously authorized Registrars (including the internal one)
+ # can continue to add new Enrollees.
+-#ap_setup_locked=1
+-
++ap_setup_locked=1
+ # Universally Unique IDentifier (UUID; see RFC 4122) of the device
+ # This value is used as the UUID for the internal WPS Registrar. If the AP
+ # is also using UPnP, this value should be set to the device's UPnP UUID.
+ # If not configured, UUID will be generated based on the local MAC address.
+-#uuid=12345678-9abc-def0-1234-56789abcdef0
+-
++uuid=12345678-9abc-def0-1234-56789abcdef0
+ # Note: If wpa_psk_file is set, WPS is used to generate random, per-device PSKs
+ # that will be appended to the wpa_psk_file. If wpa_psk_file is not set, the
+ # default PSK (wpa_psk/wpa_passphrase) will be delivered to Enrollees. Use of
+@@ -1149,27 +918,21 @@ own_ip_addr=127.0.0.1
+ # pending PIN requests. If the following variable is set, the PIN requests will
+ # be written to the configured file.
+ #wps_pin_requests=/var/run/hostapd_wps_pin_requests
+-
+ # Device Name
+ # User-friendly description of device; up to 32 octets encoded in UTF-8
+-#device_name=Wireless AP
+-
++device_name=Sitara
+ # Manufacturer
+ # The manufacturer of the device (up to 64 ASCII characters)
+-#manufacturer=Company
+-
++manufacturer=TexasInstruments
+ # Model Name
+ # Model of the device (up to 32 ASCII characters)
+-#model_name=WAP
+-
++model_name=TI_Connectivity_module
+ # Model Number
+ # Additional device description (up to 32 ASCII characters)
+-#model_number=123
+-
++model_number=wl18xx
+ # Serial Number
+ # Serial number of the device (up to 32 characters)
+-#serial_number=12345
+-
++serial_number=12345
+ # Primary Device Type
+ # Used format: <categ>-<OUI>-<subcateg>
+ # categ = Category as an integer value
+@@ -1181,8 +944,7 @@ own_ip_addr=127.0.0.1
+ #   1-0050F204-2 (Computer / Server)
+ #   5-0050F204-1 (Storage / NAS)
+ #   6-0050F204-1 (Network Infrastructure / AP)
+-#device_type=6-0050F204-1
+-
++device_type=0-00000000-0
+ # OS Version
+ # 4-octet operating system version number (hex string)
+ #os_version=01020300
+@@ -1192,8 +954,7 @@ own_ip_addr=127.0.0.1
+ # Available methods: usba ethernet label display ext_nfc_token int_nfc_token
+ #	nfc_interface push_button keypad virtual_display physical_display
+ #	virtual_push_button physical_push_button
+-#config_methods=label virtual_display virtual_push_button keypad
+-
++config_methods=virtual_display virtual_push_button keypad
+ # WPS capability discovery workaround for PBC with Windows 7
+ # Windows 7 uses incorrect way of figuring out AP's WPS capabilities by acting
+ # as a Registrar and using M1 from the AP. The config methods attribute in that
+@@ -1228,312 +989,3 @@ own_ip_addr=127.0.0.1
+ # option points to an external file that much contain the WPS Credential
+ # attribute(s) as binary data.
+ #extra_cred=hostapd.cred
+-
+-# Credential processing
+-#   0 = process received credentials internally (default)
+-#   1 = do not process received credentials; just pass them over ctrl_iface to
+-#	external program(s)
+-#   2 = process received credentials internally and pass them over ctrl_iface
+-#	to external program(s)
+-# Note: With wps_cred_processing=1, skip_cred_build should be set to 1 and
+-# extra_cred be used to provide the Credential data for Enrollees.
+-#
+-# wps_cred_processing=1 will disabled automatic updates of hostapd.conf file
+-# both for Credential processing and for marking AP Setup Locked based on
+-# validation failures of AP PIN. An external program is responsible on updating
+-# the configuration appropriately in this case.
+-#wps_cred_processing=0
+-
+-# AP Settings Attributes for M7
+-# By default, hostapd generates the AP Settings Attributes for M7 based on the
+-# current configuration. It is possible to override this by providing a file
+-# with pre-configured attributes. This is similar to extra_cred file format,
+-# but the AP Settings attributes are not encapsulated in a Credential
+-# attribute.
+-#ap_settings=hostapd.ap_settings
+-
+-# WPS UPnP interface
+-# If set, support for external Registrars is enabled.
+-#upnp_iface=br0
+-
+-# Friendly Name (required for UPnP)
+-# Short description for end use. Should be less than 64 characters.
+-#friendly_name=WPS Access Point
+-
+-# Manufacturer URL (optional for UPnP)
+-#manufacturer_url=http://www.example.com/
+-
+-# Model Description (recommended for UPnP)
+-# Long description for end user. Should be less than 128 characters.
+-#model_description=Wireless Access Point
+-
+-# Model URL (optional for UPnP)
+-#model_url=http://www.example.com/model/
+-
+-# Universal Product Code (optional for UPnP)
+-# 12-digit, all-numeric code that identifies the consumer package.
+-#upc=123456789012
+-
+-# WPS RF Bands (a = 5G, b = 2.4G, g = 2.4G, ag = dual band)
+-# This value should be set according to RF band(s) supported by the AP if
+-# hw_mode is not set. For dual band dual concurrent devices, this needs to be
+-# set to ag to allow both RF bands to be advertized.
+-#wps_rf_bands=ag
+-
+-# NFC password token for WPS
+-# These parameters can be used to configure a fixed NFC password token for the
+-# AP. This can be generated, e.g., with nfc_pw_token from wpa_supplicant. When
+-# these parameters are used, the AP is assumed to be deployed with a NFC tag
+-# that includes the matching NFC password token (e.g., written based on the
+-# NDEF record from nfc_pw_token).
+-#
+-#wps_nfc_dev_pw_id: Device Password ID (16..65535)
+-#wps_nfc_dh_pubkey: Hexdump of DH Public Key
+-#wps_nfc_dh_privkey: Hexdump of DH Private Key
+-#wps_nfc_dev_pw: Hexdump of Device Password
+-
+-##### Wi-Fi Direct (P2P) ######################################################
+-
+-# Enable P2P Device management
+-#manage_p2p=1
+-
+-# Allow cross connection
+-#allow_cross_connection=1
+-
+-#### TDLS (IEEE 802.11z-2010) #################################################
+-
+-# Prohibit use of TDLS in this BSS
+-#tdls_prohibit=1
+-
+-# Prohibit use of TDLS Channel Switching in this BSS
+-#tdls_prohibit_chan_switch=1
+-
+-##### IEEE 802.11v-2011 #######################################################
+-
+-# Time advertisement
+-# 0 = disabled (default)
+-# 2 = UTC time at which the TSF timer is 0
+-#time_advertisement=2
+-
+-# Local time zone as specified in 8.3 of IEEE Std 1003.1-2004:
+-# stdoffset[dst[offset][,start[/time],end[/time]]]
+-#time_zone=EST5
+-
+-##### IEEE 802.11u-2011 #######################################################
+-
+-# Enable Interworking service
+-#interworking=1
+-
+-# Access Network Type
+-# 0 = Private network
+-# 1 = Private network with guest access
+-# 2 = Chargeable public network
+-# 3 = Free public network
+-# 4 = Personal device network
+-# 5 = Emergency services only network
+-# 14 = Test or experimental
+-# 15 = Wildcard
+-#access_network_type=0
+-
+-# Whether the network provides connectivity to the Internet
+-# 0 = Unspecified
+-# 1 = Network provides connectivity to the Internet
+-#internet=1
+-
+-# Additional Step Required for Access
+-# Note: This is only used with open network, i.e., ASRA shall ne set to 0 if
+-# RSN is used.
+-#asra=0
+-
+-# Emergency services reachable
+-#esr=0
+-
+-# Unauthenticated emergency service accessible
+-#uesa=0
+-
+-# Venue Info (optional)
+-# The available values are defined in IEEE Std 802.11u-2011, 7.3.1.34.
+-# Example values (group,type):
+-# 0,0 = Unspecified
+-# 1,7 = Convention Center
+-# 1,13 = Coffee Shop
+-# 2,0 = Unspecified Business
+-# 7,1  Private Residence
+-#venue_group=7
+-#venue_type=1
+-
+-# Homogeneous ESS identifier (optional; dot11HESSID)
+-# If set, this shall be identifical to one of the BSSIDs in the homogeneous
+-# ESS and this shall be set to the same value across all BSSs in homogeneous
+-# ESS.
+-#hessid=02:03:04:05:06:07
+-
+-# Roaming Consortium List
+-# Arbitrary number of Roaming Consortium OIs can be configured with each line
+-# adding a new OI to the list. The first three entries are available through
+-# Beacon and Probe Response frames. Any additional entry will be available only
+-# through ANQP queries. Each OI is between 3 and 15 octets and is configured as
+-# a hexstring.
+-#roaming_consortium=021122
+-#roaming_consortium=2233445566
+-
+-# Venue Name information
+-# This parameter can be used to configure one or more Venue Name Duples for
+-# Venue Name ANQP information. Each entry has a two or three character language
+-# code (ISO-639) separated by colon from the venue name string.
+-# Note that venue_group and venue_type have to be set for Venue Name
+-# information to be complete.
+-#venue_name=eng:Example venue
+-#venue_name=fin:Esimerkkipaikka
+-
+-# Network Authentication Type
+-# This parameter indicates what type of network authentication is used in the
+-# network.
+-# format: <network auth type indicator (1-octet hex str)> [redirect URL]
+-# Network Authentication Type Indicator values:
+-# 00 = Acceptance of terms and conditions
+-# 01 = On-line enrollment supported
+-# 02 = http/https redirection
+-# 03 = DNS redirection
+-#network_auth_type=00
+-#network_auth_type=02http://www.example.com/redirect/me/here/
+-
+-# IP Address Type Availability
+-# format: <1-octet encoded value as hex str>
+-# (ipv4_type & 0x3f) << 2 | (ipv6_type & 0x3)
+-# ipv4_type:
+-# 0 = Address type not available
+-# 1 = Public IPv4 address available
+-# 2 = Port-restricted IPv4 address available
+-# 3 = Single NATed private IPv4 address available
+-# 4 = Double NATed private IPv4 address available
+-# 5 = Port-restricted IPv4 address and single NATed IPv4 address available
+-# 6 = Port-restricted IPv4 address and double NATed IPv4 address available
+-# 7 = Availability of the address type is not known
+-# ipv6_type:
+-# 0 = Address type not available
+-# 1 = Address type available
+-# 2 = Availability of the address type not known
+-#ipaddr_type_availability=14
+-
+-# Domain Name
+-# format: <variable-octet str>[,<variable-octet str>]
+-#domain_name=example.com,another.example.com,yet-another.example.com
+-
+-# 3GPP Cellular Network information
+-# format: <MCC1,MNC1>[;<MCC2,MNC2>][;...]
+-#anqp_3gpp_cell_net=244,91;310,026;234,56
+-
+-# NAI Realm information
+-# One or more realm can be advertised. Each nai_realm line adds a new realm to
+-# the set. These parameters provide information for stations using Interworking
+-# network selection to allow automatic connection to a network based on
+-# credentials.
+-# format: <encoding>,<NAI Realm(s)>[,<EAP Method 1>][,<EAP Method 2>][,...]
+-# encoding:
+-#	0 = Realm formatted in accordance with IETF RFC 4282
+-#	1 = UTF-8 formatted character string that is not formatted in
+-#	    accordance with IETF RFC 4282
+-# NAI Realm(s): Semi-colon delimited NAI Realm(s)
+-# EAP Method: <EAP Method>[:<[AuthParam1:Val1]>][<[AuthParam2:Val2]>][...]
+-# AuthParam (Table 8-188 in IEEE Std 802.11-2012):
+-# ID 2 = Non-EAP Inner Authentication Type
+-#	1 = PAP, 2 = CHAP, 3 = MSCHAP, 4 = MSCHAPV2
+-# ID 3 = Inner authentication EAP Method Type
+-# ID 5 = Credential Type
+-#	1 = SIM, 2 = USIM, 3 = NFC Secure Element, 4 = Hardware Token,
+-#	5 = Softoken, 6 = Certificate, 7 = username/password, 9 = Anonymous,
+-#	10 = Vendor Specific
+-#nai_realm=0,example.com;example.net
+-# EAP methods EAP-TLS with certificate and EAP-TTLS/MSCHAPv2 with
+-# username/password
+-#nai_realm=0,example.org,13[5:6],21[2:4][5:7]
+-
+-##### Hotspot 2.0 #############################################################
+-
+-# Enable Hotspot 2.0 support
+-#hs20=1
+-
+-# Disable Downstream Group-Addressed Forwarding (DGAF)
+-# This can be used to configure a network where no group-addressed frames are
+-# allowed. The AP will not forward any group-address frames to the stations and
+-# random GTKs are issued for each station to prevent associated stations from
+-# forging such frames to other stations in the BSS.
+-#disable_dgaf=1
+-
+-# Operator Friendly Name
+-# This parameter can be used to configure one or more Operator Friendly Name
+-# Duples. Each entry has a two or three character language code (ISO-639)
+-# separated by colon from the operator friendly name string.
+-#hs20_oper_friendly_name=eng:Example operator
+-#hs20_oper_friendly_name=fin:Esimerkkioperaattori
+-
+-# Connection Capability
+-# This can be used to advertise what type of IP traffic can be sent through the
+-# hotspot (e.g., due to firewall allowing/blocking protocols/ports).
+-# format: <IP Protocol>:<Port Number>:<Status>
+-# IP Protocol: 1 = ICMP, 6 = TCP, 17 = UDP
+-# Port Number: 0..65535
+-# Status: 0 = Closed, 1 = Open, 2 = Unknown
+-# Each hs20_conn_capab line is added to the list of advertised tuples.
+-#hs20_conn_capab=1:0:2
+-#hs20_conn_capab=6:22:1
+-#hs20_conn_capab=17:5060:0
+-
+-# WAN Metrics
+-# format: <WAN Info>:<DL Speed>:<UL Speed>:<DL Load>:<UL Load>:<LMD>
+-# WAN Info: B0-B1: Link Status, B2: Symmetric Link, B3: At Capabity
+-#    (encoded as two hex digits)
+-#    Link Status: 1 = Link up, 2 = Link down, 3 = Link in test state
+-# Downlink Speed: Estimate of WAN backhaul link current downlink speed in kbps;
+-#	1..4294967295; 0 = unknown
+-# Uplink Speed: Estimate of WAN backhaul link current uplink speed in kbps
+-#	1..4294967295; 0 = unknown
+-# Downlink Load: Current load of downlink WAN connection (scaled to 255 = 100%)
+-# Uplink Load: Current load of uplink WAN connection (scaled to 255 = 100%)
+-# Load Measurement Duration: Duration for measuring downlink/uplink load in
+-# tenths of a second (1..65535); 0 if load cannot be determined
+-#hs20_wan_metrics=01:8000:1000:80:240:3000
+-
+-# Operating Class Indication
+-# List of operating classes the BSSes in this ESS use. The Global operating
+-# classes in Table E-4 of IEEE Std 802.11-2012 Annex E define the values that
+-# can be used in this.
+-# format: hexdump of operating class octets
+-# for example, operating classes 81 (2.4 GHz channels 1-13) and 115 (5 GHz
+-# channels 36-48):
+-#hs20_operating_class=5173
+-
+-##### Multiple BSSID support ##################################################
+-#
+-# Above configuration is using the default interface (wlan#, or multi-SSID VLAN
+-# interfaces). Other BSSIDs can be added by using separator 'bss' with
+-# default interface name to be allocated for the data packets of the new BSS.
+-#
+-# hostapd will generate BSSID mask based on the BSSIDs that are
+-# configured. hostapd will verify that dev_addr & MASK == dev_addr. If this is
+-# not the case, the MAC address of the radio must be changed before starting
+-# hostapd (ifconfig wlan0 hw ether <MAC addr>). If a BSSID is configured for
+-# every secondary BSS, this limitation is not applied at hostapd and other
+-# masks may be used if the driver supports them (e.g., swap the locally
+-# administered bit)
+-#
+-# BSSIDs are assigned in order to each BSS, unless an explicit BSSID is
+-# specified using the 'bssid' parameter.
+-# If an explicit BSSID is specified, it must be chosen such that it:
+-# - results in a valid MASK that covers it and the dev_addr
+-# - is not the same as the MAC address of the radio
+-# - is not the same as any other explicitly specified BSSID
+-#
+-# Please note that hostapd uses some of the values configured for the first BSS
+-# as the defaults for the following BSSes. However, it is recommended that all
+-# BSSes include explicit configuration of all relevant configuration items.
+-#
+-#bss=wlan0_0
+-#ssid=test2
+-# most of the above items can be used here (apart from radio interface specific
+-# items, like channel)
+-
+-#bss=wlan0_1
+-#bssid=00:13:10:95:fe:0b
+-# ...
 -- 
 1.7.9.5
 
diff --git a/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon-wl18xx_r8.a6.01.bb b/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon-wl18xx_r8.a8.08.bb
similarity index 84%
copy from meta-arago-extras/recipes-connectivity/hostap/hostap-daemon-wl18xx_r8.a6.01.bb
copy to meta-arago-extras/recipes-connectivity/hostap/hostap-daemon-wl18xx_r8.a8.08.bb
index e232b32..861c97b 100644
--- a/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon-wl18xx_r8.a6.01.bb
+++ b/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon-wl18xx_r8.a8.08.bb
@@ -6,7 +6,7 @@ require hostap.inc
 LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://../COPYING;md5=ab87f20cd7e8c0d0a6539b34d3791d0e"
 
-PR_append = "b+gitr${SRCPV}"
+PR_append = "a+gitr${SRCPV}"
 
 FILESEXTRAPATHS_append := "${THISDIR}/hostap-daemon:"
 
@@ -14,8 +14,8 @@ FILESEXTRAPATHS_append := "${THISDIR}/hostap-daemon:"
 # of hostap
 PV = "2.0-devel-ti"
 
-# Tag: ol_r8.a6.01
-SRCREV = "7190ff7dbd43243290b626068ded0d61c5019050"
+# Tag: ol_r8.a8.08
+SRCREV = "257ab333aad993b4be81808524bc0d939c276058"
 
 PROVIDES += "hostap-daemon"
 RPROVIDES_${PN} += "hostap-daemon"
diff --git a/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon/defconfig b/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon/defconfig
index 6a654c9..ccc0996 100644
--- a/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon/defconfig
+++ b/meta-arago-extras/recipes-connectivity/hostap/hostap-daemon/defconfig
@@ -10,7 +10,7 @@
 # to override previous values of the variables.
 
 # Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
+#CONFIG_DRIVER_HOSTAP=y
 
 # Driver interface for wired authenticator
 #CONFIG_DRIVER_WIRED=y
@@ -21,13 +21,13 @@ CONFIG_DRIVER_HOSTAP=y
 
 # Driver interface for drivers using the nl80211 kernel interface
 CONFIG_DRIVER_NL80211=y
-CONFIG_LIBNL20=y
 # driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
 # shipped with your distribution yet. If that is the case, you need to build
 # newer libnl version and point the hostapd build to use it.
 #LIBNL=/usr/src/libnl
 #CFLAGS += -I$(LIBNL)/include
 #LIBS += -L$(LIBNL)/lib
+CONFIG_LIBNL32=y
 
 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
 #CONFIG_DRIVER_BSD=y
@@ -40,13 +40,13 @@ CONFIG_LIBNL20=y
 #CONFIG_DRIVER_NONE=y
 
 # IEEE 802.11F/IAPP
-CONFIG_IAPP=y
+#CONFIG_IAPP=y
 
 # WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
+#CONFIG_RSN_PREAUTH=y
 
 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
+#CONFIG_PEERKEY=y
 
 # IEEE 802.11w (management frame protection)
 # This version is an experimental implementation based on IEEE 802.11w/D1.0
@@ -55,25 +55,25 @@ CONFIG_PEERKEY=y
 #CONFIG_IEEE80211W=y
 
 # Integrated EAP server
-CONFIG_EAP=y
+#CONFIG_EAP=y
 
 # EAP-MD5 for the integrated EAP server
-CONFIG_EAP_MD5=y
+#CONFIG_EAP_MD5=y
 
 # EAP-TLS for the integrated EAP server
-CONFIG_EAP_TLS=y
+#CONFIG_EAP_TLS=y
 
 # EAP-MSCHAPv2 for the integrated EAP server
-CONFIG_EAP_MSCHAPV2=y
+#CONFIG_EAP_MSCHAPV2=y
 
 # EAP-PEAP for the integrated EAP server
-CONFIG_EAP_PEAP=y
+#CONFIG_EAP_PEAP=y
 
 # EAP-GTC for the integrated EAP server
-CONFIG_EAP_GTC=y
+#CONFIG_EAP_GTC=y
 
 # EAP-TTLS for the integrated EAP server
-CONFIG_EAP_TTLS=y
+#CONFIG_EAP_TTLS=y
 
 # EAP-SIM for the integrated EAP server
 #CONFIG_EAP_SIM=y
@@ -111,7 +111,7 @@ CONFIG_WPS=y
 # Enable WSC 2.0 support
 CONFIG_WPS2=y
 # Enable UPnP support for external WPS Registrars
-CONFIG_WPS_UPNP=y
+#CONFIG_WPS_UPNP=y
 
 # EAP-IKEv2
 #CONFIG_EAP_IKEV2=y
@@ -145,11 +145,14 @@ CONFIG_IEEE80211N=y
 # code is not needed.
 #CONFIG_NO_STDOUT_DEBUG=y
 
+# Add support for writing debug log to Android logcat instead of standard output
+CONFIG_ANDROID_LOG=y
+
 # Remove support for RADIUS accounting
 #CONFIG_NO_ACCOUNTING=y
 
 # Remove support for RADIUS
-#CONFIG_NO_RADIUS=y
+CONFIG_NO_RADIUS=y
 
 # Remove support for VLANs
 #CONFIG_NO_VLAN=y
@@ -159,6 +162,12 @@ CONFIG_IEEE80211N=y
 # option.
 #CONFIG_NO_DUMP_STATE=y
 
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+CONFIG_OS=unix
+
 # Enable tracing code for developer debugging
 # This tracks use of memory allocations and other registrations and reports
 # incorrect use with a backtrace of call (or allocation) location.
@@ -176,7 +185,6 @@ CONFIG_IEEE80211N=y
 #LIBS += -lbfd -liberty -lz
 #LIBS_p += -lbfd -liberty -lz
 #LIBS_c += -lbfd -liberty -lz
-#
-#
 
-CONFIG_NO_RANDOM_POOL=y
+# Enable AP
+CONFIG_AP=y
diff --git a/meta-arago-extras/recipes-connectivity/hostap/hostap.inc b/meta-arago-extras/recipes-connectivity/hostap/hostap.inc
index 8f6488b..9be2585 100644
--- a/meta-arago-extras/recipes-connectivity/hostap/hostap.inc
+++ b/meta-arago-extras/recipes-connectivity/hostap/hostap.inc
@@ -11,7 +11,7 @@ DEPENDS = "libnl openssl"
 # default
 DEFAULT_PREFERENCE = "-1"
 
-PR = "r4"
+PR = "r5"
 
 inherit update-rc.d
 INITSCRIPT_NAME="hostapd"
@@ -28,6 +28,7 @@ S = "${WORKDIR}/git/hostapd"
 do_configure() {
 	install -m 0644 ${WORKDIR}/defconfig ${S}/.config
 	echo "CFLAGS += -I${STAGING_INCDIR}" >> .config
+        echo "CFLAGS += -I${STAGING_INCDIR}/libnl3/" >> .config
 	echo "LIBS += -L${STAGING_LIBDIR}" >> .config
 }
 
-- 
1.7.9



^ permalink raw reply related	[flat|nested] 3+ messages in thread