From: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Olliver Schinagl <oliver+list-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
Cc: oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org,
tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
"rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org"
<rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dev-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org,
ijc-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Subject: Re: [PATCH 3/3] ARM: sunxi: dts: Add ahci support to a few A10 and A20 boards
Date: Mon, 9 Dec 2013 20:16:20 +0100 [thread overview]
Message-ID: <20131209191620.GN24519@lukather> (raw)
In-Reply-To: <52A30ADB.7090106-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 1977 bytes --]
On Sat, Dec 07, 2013 at 12:47:39PM +0100, Olliver Schinagl wrote:
> Hey maxime,
> On 06-12-13 19:33, Maxime Ripard wrote:
> >Hi Oliver,
> >
> >On Wed, Dec 04, 2013 at 01:10:55PM +0100, oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org wrote:
> >>From: Oliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
> >>
> >>This patch adds sunxi sata support to A10 and A20 boards that have such
> >>a connector. Some boards also feature a regulator via a GPIO and support
> >>for this is also added.
> >>
> >>Signed-off-by: Olliver Schinagl <oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
> >
> >Your git setup seems to be pretty uncertain about how your first name is spelled :)
> I should have formally mention it to confuse less people,
>
> This is how officially my name is spelled (I left out any 'middle'
> letters. I never really used it as such, as it confuses people and
> they always write it wrong anyway. After years I decided that at
> least on these patches, I should write it down properly
> (googleability etc in the future). So formally it's Olliver 'oliver'
> M. Schinagl.
>
> And no, I won't share my middle name :p
>
> There! :)
My point was more that the spelling in your From is different from the
spelling in your SoB.
> >>diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
> >>index 0552a64..b72c69e 100644
> >>--- a/arch/arm/boot/dts/sun7i-a20.dtsi
> >>+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> >>@@ -368,6 +368,15 @@
> >> };
> >> };
> >>
> >>+ sata: ahci@01c18000 {
> >>+ compatible = "allwinner,sun4i-a10-ahci";
> >>+ reg = <0x01c18000 0x1000>;
> >>+ interrupts = <0 56 1>;
> Will always fix this to <0 56 4> if i'm not mistaken.
Only the GIC has a three-cells interrupts. So only the A20 and A31 are
supposed to have this value.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Olliver Schinagl <oliver+list@schinagl.nl>
Cc: oliver@schinagl.nl, tj@kernel.org, grant.likely@linaro.org,
"rob.herring@calxeda.com" <rob.herring@calxeda.com>,
linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, dev@linux-sunxi.org,
ijc@hellion.org.uk, hdegoede@redhat.com
Subject: Re: [PATCH 3/3] ARM: sunxi: dts: Add ahci support to a few A10 and A20 boards
Date: Mon, 9 Dec 2013 20:16:20 +0100 [thread overview]
Message-ID: <20131209191620.GN24519@lukather> (raw)
In-Reply-To: <52A30ADB.7090106@schinagl.nl>
[-- Attachment #1: Type: text/plain, Size: 1893 bytes --]
On Sat, Dec 07, 2013 at 12:47:39PM +0100, Olliver Schinagl wrote:
> Hey maxime,
> On 06-12-13 19:33, Maxime Ripard wrote:
> >Hi Oliver,
> >
> >On Wed, Dec 04, 2013 at 01:10:55PM +0100, oliver@schinagl.nl wrote:
> >>From: Oliver Schinagl <oliver@schinagl.nl>
> >>
> >>This patch adds sunxi sata support to A10 and A20 boards that have such
> >>a connector. Some boards also feature a regulator via a GPIO and support
> >>for this is also added.
> >>
> >>Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
> >
> >Your git setup seems to be pretty uncertain about how your first name is spelled :)
> I should have formally mention it to confuse less people,
>
> This is how officially my name is spelled (I left out any 'middle'
> letters. I never really used it as such, as it confuses people and
> they always write it wrong anyway. After years I decided that at
> least on these patches, I should write it down properly
> (googleability etc in the future). So formally it's Olliver 'oliver'
> M. Schinagl.
>
> And no, I won't share my middle name :p
>
> There! :)
My point was more that the spelling in your From is different from the
spelling in your SoB.
> >>diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
> >>index 0552a64..b72c69e 100644
> >>--- a/arch/arm/boot/dts/sun7i-a20.dtsi
> >>+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> >>@@ -368,6 +368,15 @@
> >> };
> >> };
> >>
> >>+ sata: ahci@01c18000 {
> >>+ compatible = "allwinner,sun4i-a10-ahci";
> >>+ reg = <0x01c18000 0x1000>;
> >>+ interrupts = <0 56 1>;
> Will always fix this to <0 56 4> if i'm not mistaken.
Only the GIC has a three-cells interrupts. So only the A20 and A31 are
supposed to have this value.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2013-12-09 19:16 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-04 12:10 [PATCH 0/3] AHCI: sunxi: Add sunxi AHCI driver oliver-dxLnbx3+1qmEVqv0pETR8A
2013-12-04 12:10 ` oliver
[not found] ` <1386159055-10264-1-git-send-email-oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
2013-12-04 12:10 ` [PATCH 1/3] RFC: AHCI: libahci is missing DMA oliver-dxLnbx3+1qmEVqv0pETR8A
2013-12-04 12:10 ` oliver
2013-12-04 12:32 ` Tejun Heo
[not found] ` <20131204123234.GC3158-Gd/HAXX7CRxy/B6EtB590w@public.gmane.org>
2013-12-04 12:36 ` Oliver Schinagl
2013-12-04 12:36 ` Oliver Schinagl
2013-12-04 12:47 ` Sergei Shtylyov
[not found] ` <529F2463.8080907-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2013-12-04 13:09 ` Oliver Schinagl
2013-12-04 13:09 ` Oliver Schinagl
2013-12-04 12:10 ` [PATCH 2/3] ARM: sunxi: Add an ahci-platform compatible AHCI driver for the Allwinner SUNXi series of SoCs oliver-dxLnbx3+1qmEVqv0pETR8A
2013-12-04 12:10 ` oliver
[not found] ` <1386159055-10264-3-git-send-email-oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
2013-12-04 12:26 ` Mark Rutland
2013-12-04 12:26 ` Mark Rutland
[not found] ` <20131204122602.GN16025-NuALmloUBlrZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2013-12-04 12:49 ` Oliver Schinagl
2013-12-04 12:49 ` Oliver Schinagl
2013-12-04 12:37 ` Tejun Heo
[not found] ` <20131204123708.GD3158-Gd/HAXX7CRxy/B6EtB590w@public.gmane.org>
2013-12-04 12:56 ` Oliver Schinagl
2013-12-04 12:56 ` Oliver Schinagl
[not found] ` <529F2677.3070208-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
2013-12-04 13:14 ` Tejun Heo
2013-12-04 13:14 ` Tejun Heo
[not found] ` <20131204131402.GG3158-Gd/HAXX7CRxy/B6EtB590w@public.gmane.org>
2013-12-04 13:16 ` Olliver Schinagl
2013-12-04 13:16 ` Olliver Schinagl
[not found] ` <529F2B41.8090009-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
2013-12-04 13:23 ` Tejun Heo
2013-12-04 13:23 ` Tejun Heo
2013-12-06 9:01 ` Thomas Petazzoni
2013-12-06 9:12 ` Oliver Schinagl
2013-12-06 9:12 ` Oliver Schinagl
2013-12-06 11:06 ` Hans de Goede
[not found] ` <52A19502.1090409-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
2013-12-06 9:18 ` Thomas Petazzoni
2013-12-06 9:18 ` Thomas Petazzoni
2013-12-15 19:00 ` Hans de Goede
2013-12-15 19:00 ` Hans de Goede
2013-12-15 19:04 ` Tejun Heo
2013-12-16 6:21 ` Oliver Schinagl
[not found] ` <20131204132312.GH3158-Gd/HAXX7CRxy/B6EtB590w@public.gmane.org>
2013-12-11 14:51 ` Olliver Schinagl
2013-12-11 14:51 ` Olliver Schinagl
2013-12-12 6:40 ` Shawn Guo
2013-12-12 6:40 ` Shawn Guo
2013-12-12 8:47 ` Olliver Schinagl
2013-12-04 12:10 ` [PATCH 3/3] ARM: sunxi: dts: Add ahci support to a few A10 and A20 boards oliver-dxLnbx3+1qmEVqv0pETR8A
2013-12-04 12:10 ` oliver
[not found] ` <1386159055-10264-4-git-send-email-oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
2013-12-06 18:33 ` Maxime Ripard
2013-12-06 18:33 ` Maxime Ripard
2013-12-07 11:47 ` Olliver Schinagl
2013-12-07 11:47 ` Olliver Schinagl
[not found] ` <52A30ADB.7090106-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org>
2013-12-07 13:11 ` Michal Suchanek
2013-12-07 13:11 ` [linux-sunxi] " Michal Suchanek
2013-12-09 19:16 ` Maxime Ripard [this message]
2013-12-09 19:16 ` Maxime Ripard
2013-12-04 12:14 ` [PATCH 0/3] AHCI: sunxi: Add sunxi AHCI driver Olliver Schinagl
2013-12-04 12:14 ` Olliver Schinagl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131209191620.GN24519@lukather \
--to=maxime.ripard-wi1+55scjutkeb57/3fjtnbpr1lh4cv8@public.gmane.org \
--cc=dev-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=ijc-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=oliver+list-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org \
--cc=oliver-dxLnbx3+1qmEVqv0pETR8A@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.