From: Magnus Damm <magnus.damm@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: khilman@linaro.org, arnd@arndb.de, linux-sh@vger.kernel.org,
daniel.lezcano@linaro.org, horms@verge.net.au,
john.stultz@linaro.org, olof@lixom.net,
Magnus Damm <magnus.damm@gmail.com>,
tglx@linutronix.de
Subject: [PATCH v5 02/03] ARM: shmobile: Remove CMT, TMU and STI Kconfig entries
Date: Tue, 17 Dec 2013 10:12:48 +0000 [thread overview]
Message-ID: <20131217101248.17491.52424.sendpatchset@w520> (raw)
In-Reply-To: <20131217101212.17491.56898.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Now when drivers/clocksource/Kconfig has been
updated with entires for CMT, TMU and STI
it is safe to remove these from mach-shmobile.
Also select timers per SoC via SYS_SUPPORTS_xxx.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: John Stultz <john.stultz@linaro.org>
---
arch/arm/mach-shmobile/Kconfig | 35 +++++++++++++++++------------------
1 file changed, 17 insertions(+), 18 deletions(-)
--- 0001/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2013-12-17 18:52:58.000000000 +0900
@@ -24,13 +24,16 @@ comment "Renesas ARM SoCs System Type"
config ARCH_EMEV2
bool "Emma Mobile EV2"
+ select SYS_SUPPORTS_EM_STI
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
+ select SYS_SUPPORTS_SH_MTU2
config ARCH_R8A7791
bool "R-Car M2 (R8A77910)"
select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
comment "Renesas ARM SoCs Board Type"
@@ -60,6 +63,8 @@ config ARCH_SH7372
select ARM_CPU_SUSPEND if PM || CPU_IDLE
select CPU_V7
select SH_CLK_CPG
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
@@ -69,6 +74,8 @@ config ARCH_SH73A0
select I2C
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
@@ -79,6 +86,8 @@ config ARCH_R8A73A4
select RENESAS_IRQC
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
@@ -87,6 +96,8 @@ config ARCH_R8A7740
select CPU_V7
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7778
bool "R-Car M1A (R8A77781)"
@@ -96,6 +107,7 @@ config ARCH_R8A7778
select ARM_GIC
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
@@ -106,6 +118,7 @@ config ARCH_R8A7779
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
@@ -115,6 +128,7 @@ config ARCH_R8A7790
select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
config ARCH_R8A7791
bool "R-Car M2 (R8A77910)"
@@ -124,6 +138,7 @@ config ARCH_R8A7791
select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
config ARCH_EMEV2
bool "Emma Mobile EV2"
@@ -133,6 +148,7 @@ config ARCH_EMEV2
select MIGHT_HAVE_PCI
select USE_OF
select AUTO_ZRELADDR
+ select SYS_SUPPORTS_EM_STI
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
@@ -140,6 +156,7 @@ config ARCH_R7S72100
select ARM_GIC
select CPU_V7
select SH_CLK_CPG
+ select SYS_SUPPORTS_SH_MTU2
comment "Renesas ARM SoCs Board Type"
@@ -334,24 +351,6 @@ config SHMOBILE_TIMER_HZ
want to select a HZ value such as 128 that can evenly divide RCLK.
A HZ value that does not divide evenly may cause timer drift.
-config SH_TIMER_CMT
- bool "CMT timer driver"
- default y
- help
- This enables build of the CMT timer driver.
-
-config SH_TIMER_TMU
- bool "TMU timer driver"
- default y
- help
- This enables build of the TMU timer driver.
-
-config EM_TIMER_STI
- bool "STI timer driver"
- default y
- help
- This enables build of the STI timer driver.
-
endmenu
endif
WARNING: multiple messages have this Message-ID (diff)
From: Magnus Damm <magnus.damm@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: khilman@linaro.org, arnd@arndb.de, linux-sh@vger.kernel.org,
daniel.lezcano@linaro.org, horms@verge.net.au,
john.stultz@linaro.org, olof@lixom.net,
Magnus Damm <magnus.damm@gmail.com>,
tglx@linutronix.de
Subject: [PATCH v5 02/03] ARM: shmobile: Remove CMT, TMU and STI Kconfig entries
Date: Tue, 17 Dec 2013 19:12:48 +0900 [thread overview]
Message-ID: <20131217101248.17491.52424.sendpatchset@w520> (raw)
In-Reply-To: <20131217101212.17491.56898.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Now when drivers/clocksource/Kconfig has been
updated with entires for CMT, TMU and STI
it is safe to remove these from mach-shmobile.
Also select timers per SoC via SYS_SUPPORTS_xxx.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: John Stultz <john.stultz@linaro.org>
---
arch/arm/mach-shmobile/Kconfig | 35 +++++++++++++++++------------------
1 file changed, 17 insertions(+), 18 deletions(-)
--- 0001/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2013-12-17 18:52:58.000000000 +0900
@@ -24,13 +24,16 @@ comment "Renesas ARM SoCs System Type"
config ARCH_EMEV2
bool "Emma Mobile EV2"
+ select SYS_SUPPORTS_EM_STI
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
+ select SYS_SUPPORTS_SH_MTU2
config ARCH_R8A7791
bool "R-Car M2 (R8A77910)"
select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
comment "Renesas ARM SoCs Board Type"
@@ -60,6 +63,8 @@ config ARCH_SH7372
select ARM_CPU_SUSPEND if PM || CPU_IDLE
select CPU_V7
select SH_CLK_CPG
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
@@ -69,6 +74,8 @@ config ARCH_SH73A0
select I2C
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
@@ -79,6 +86,8 @@ config ARCH_R8A73A4
select RENESAS_IRQC
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
@@ -87,6 +96,8 @@ config ARCH_R8A7740
select CPU_V7
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7778
bool "R-Car M1A (R8A77781)"
@@ -96,6 +107,7 @@ config ARCH_R8A7778
select ARM_GIC
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
@@ -106,6 +118,7 @@ config ARCH_R8A7779
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
@@ -115,6 +128,7 @@ config ARCH_R8A7790
select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
config ARCH_R8A7791
bool "R-Car M2 (R8A77910)"
@@ -124,6 +138,7 @@ config ARCH_R8A7791
select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
config ARCH_EMEV2
bool "Emma Mobile EV2"
@@ -133,6 +148,7 @@ config ARCH_EMEV2
select MIGHT_HAVE_PCI
select USE_OF
select AUTO_ZRELADDR
+ select SYS_SUPPORTS_EM_STI
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
@@ -140,6 +156,7 @@ config ARCH_R7S72100
select ARM_GIC
select CPU_V7
select SH_CLK_CPG
+ select SYS_SUPPORTS_SH_MTU2
comment "Renesas ARM SoCs Board Type"
@@ -334,24 +351,6 @@ config SHMOBILE_TIMER_HZ
want to select a HZ value such as 128 that can evenly divide RCLK.
A HZ value that does not divide evenly may cause timer drift.
-config SH_TIMER_CMT
- bool "CMT timer driver"
- default y
- help
- This enables build of the CMT timer driver.
-
-config SH_TIMER_TMU
- bool "TMU timer driver"
- default y
- help
- This enables build of the TMU timer driver.
-
-config EM_TIMER_STI
- bool "STI timer driver"
- default y
- help
- This enables build of the STI timer driver.
-
endmenu
endif
next prev parent reply other threads:[~2013-12-17 10:12 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 10:12 [PATCH v5 00/03] clocksource: Consolidate SH and ARM mach-shmobile Kconfig bits Magnus Damm
2013-12-17 10:12 ` Magnus Damm
2013-12-17 10:12 ` [PATCH v5 01/03] clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI Magnus Damm
2013-12-17 10:12 ` Magnus Damm
2013-12-17 10:12 ` Magnus Damm [this message]
2013-12-17 10:12 ` [PATCH v5 02/03] ARM: shmobile: Remove CMT, TMU and STI Kconfig entries Magnus Damm
2013-12-17 10:13 ` [PATCH v5 03/03] sh: Remove Kconfig entries for TMU, CMT and MTU2 Magnus Damm
2013-12-17 10:13 ` Magnus Damm
2013-12-18 15:38 ` [PATCH v5 00/03] clocksource: Consolidate SH and ARM mach-shmobile Kconfig bits Daniel Lezcano
2013-12-18 15:38 ` Daniel Lezcano
2013-12-18 22:24 ` Magnus Damm
2013-12-18 22:24 ` Magnus Damm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131217101248.17491.52424.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=arnd@arndb.de \
--cc=daniel.lezcano@linaro.org \
--cc=horms@verge.net.au \
--cc=john.stultz@linaro.org \
--cc=khilman@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=olof@lixom.net \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.