Re: [GIT PULL] make mach-omap2 boot with device tree only for v3.14

[Tony Lindgren <tony@atomide.com>]

* Paul Walmsley <paul@pwsan.com> [131216 23:16]:
> On Fri, 13 Dec 2013, Tony Lindgren wrote:
> 
> > OK posted a patch for the SBC-T3730 with minimal support also for
> > SBC-3530 and SBC-3517 that should boot far enough to start adding
> > more devices. Paul, care to try it on the CM-T3517, the patch is:
> > 
> > [PATCH] ARM: dts: Add support for sbc-3xxx with cm-t3730
> 
> Didn't get anything out of the serial port:
> 
> http://www.pwsan.com/omap/testlogs/test_tonys_conversion_v3.14/20131215235827/boot/cmt3517/cmt3517_log.txt

OK thanks for testing. Looks like the CompuLab guys will need to
take a look at it. I'll update my patch for SBC-T3730 only with the
comments from Igor.
 
> As a partial sanity check, AM3517 EVM was included as part of the run 
> (with a separate uImage+dtb of course) and that seems to boot OK:
> 
> http://www.pwsan.com/omap/testlogs/test_tonys_conversion_v3.14/20131215235827/boot/3517evm/3517evm_log.txt

Hmm OK, weird that the 3517 EVM boots but not the CM-T3517.
 
> In case it's useful, here's a CM-T3517 boot log from v3.13-rc4:
> 
> http://www.pwsan.com/omap/testlogs/test_v3.13-rc4/20131215195251/boot/cmt3517/cmt3517_log.txt

OK thanks.

Tony