[PATCH v2 02/11] clk: sunxi: add gating support to PLL1

[mturquette@linaro.org (Mike Turquette)]

Quoting Emilio L?pez (2013-12-17 16:44:54)
> This commit adds gating support to PLL1 on the clock driver. This makes
> the PLL1 implementation fully compatible with PLL4 as well.
> 
> Signed-off-by: Emilio L?pez <emilio@elopez.com.ar>
> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Acked-by: Mike Turquette <mturquette@linaro.org>

> ---
>  Documentation/devicetree/bindings/clock/sunxi.txt | 2 +-
>  drivers/clk/sunxi/clk-sunxi.c                     | 2 ++
>  2 files changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> index 91a748f..b8c6cc4 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> @@ -7,7 +7,7 @@ This binding uses the common clock binding[1].
>  Required properties:
>  - compatible : shall be one of the following:
>         "allwinner,sun4i-osc-clk" - for a gatable oscillator
> -       "allwinner,sun4i-pll1-clk" - for the main PLL clock
> +       "allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4
>         "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
>         "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
>         "allwinner,sun4i-axi-clk" - for the AXI clock
> diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
> index 6f756f4..5b86234 100644
> --- a/drivers/clk/sunxi/clk-sunxi.c
> +++ b/drivers/clk/sunxi/clk-sunxi.c
> @@ -292,11 +292,13 @@ static struct clk_factors_config sun4i_apb1_config = {
>  };
>  
>  static const struct factors_data sun4i_pll1_data __initconst = {
> +       .enable = 31,
>         .table = &sun4i_pll1_config,
>         .getter = sun4i_get_pll1_factors,
>  };
>  
>  static const struct factors_data sun6i_a31_pll1_data __initconst = {
> +       .enable = 31,
>         .table = &sun6i_a31_pll1_config,
>         .getter = sun6i_a31_get_pll1_factors,
>  };
> -- 
> 1.8.5.1
>