* [PATCH 1/2] mfd: max77686: fix regmap resource leak on driver remove
@ 2013-12-20 9:35 Krzysztof Kozlowski
2013-12-20 9:35 ` [PATCH 2/2] mfd: max77693: Set proper maximum register for MUIC regmap Krzysztof Kozlowski
2013-12-20 13:56 ` [PATCH 1/2] mfd: max77686: fix regmap resource leak on driver remove Lee Jones
0 siblings, 2 replies; 4+ messages in thread
From: Krzysztof Kozlowski @ 2013-12-20 9:35 UTC (permalink / raw)
To: Samuel Ortiz, Lee Jones, linux-kernel
Cc: Krzysztof Kozlowski, Kyungmin Park, Marek Szyprowski, stable
The regmap used by max77686 MFD driver was not freed with regmap_exit()
on driver exit. This lead to leak of resources.
Replace regmap_init_i2c() call in driver probe with initialization of
managed register map so the regmap will be properly freed by the device
management code.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: stable@vger.kernel.org
---
drivers/mfd/max77686.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index 34520cbe8afb..12b3ae3aa7c5 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -104,7 +104,7 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
max77686->irq_gpio = pdata->irq_gpio;
max77686->irq = i2c->irq;
- max77686->regmap = regmap_init_i2c(i2c, &max77686_regmap_config);
+ max77686->regmap = devm_regmap_init_i2c(i2c, &max77686_regmap_config);
if (IS_ERR(max77686->regmap)) {
ret = PTR_ERR(max77686->regmap);
dev_err(max77686->dev, "Failed to allocate register map: %d\n",
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] mfd: max77693: Set proper maximum register for MUIC regmap
2013-12-20 9:35 [PATCH 1/2] mfd: max77686: fix regmap resource leak on driver remove Krzysztof Kozlowski
@ 2013-12-20 9:35 ` Krzysztof Kozlowski
2013-12-20 13:58 ` Lee Jones
2013-12-20 13:56 ` [PATCH 1/2] mfd: max77686: fix regmap resource leak on driver remove Lee Jones
1 sibling, 1 reply; 4+ messages in thread
From: Krzysztof Kozlowski @ 2013-12-20 9:35 UTC (permalink / raw)
To: Samuel Ortiz, Lee Jones, linux-kernel
Cc: Krzysztof Kozlowski, Kyungmin Park, Marek Szyprowski
The MUIC block in max77693 has different I2C address than PMIC. The
driver allocated two regmaps: for PMIC and MUIC. However it used the
same regmap_config (with max_register field) for both regmaps. Actual
maximum address of register for MUIC is different than for PMIC.
Define another regmap_config for MUIC with proper max_register value.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
---
drivers/mfd/max77693.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index 9f92463f4f7e..3873a54e16ff 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -107,6 +107,12 @@ static const struct regmap_config max77693_regmap_config = {
.max_register = MAX77693_PMIC_REG_END,
};
+static const struct regmap_config max77693_regmap_muic_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77693_MUIC_REG_END,
+};
+
static int max77693_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -153,7 +159,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
* before call max77693-muic probe() function.
*/
max77693->regmap_muic = devm_regmap_init_i2c(max77693->muic,
- &max77693_regmap_config);
+ &max77693_regmap_muic_config);
if (IS_ERR(max77693->regmap_muic)) {
ret = PTR_ERR(max77693->regmap_muic);
dev_err(max77693->dev,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] mfd: max77686: fix regmap resource leak on driver remove
2013-12-20 9:35 [PATCH 1/2] mfd: max77686: fix regmap resource leak on driver remove Krzysztof Kozlowski
2013-12-20 9:35 ` [PATCH 2/2] mfd: max77693: Set proper maximum register for MUIC regmap Krzysztof Kozlowski
@ 2013-12-20 13:56 ` Lee Jones
1 sibling, 0 replies; 4+ messages in thread
From: Lee Jones @ 2013-12-20 13:56 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Samuel Ortiz, linux-kernel, Kyungmin Park, Marek Szyprowski,
stable
On Fri, 20 Dec 2013, Krzysztof Kozlowski wrote:
> The regmap used by max77686 MFD driver was not freed with regmap_exit()
> on driver exit. This lead to leak of resources.
>
> Replace regmap_init_i2c() call in driver probe with initialization of
> managed register map so the regmap will be properly freed by the device
> management code.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Marek Szyprowski <m.szyprowski@samsung.com>
> Cc: stable@vger.kernel.org
> ---
> drivers/mfd/max77686.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Always happy to move to managed resources.
Applied, thanks.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 2/2] mfd: max77693: Set proper maximum register for MUIC regmap
2013-12-20 9:35 ` [PATCH 2/2] mfd: max77693: Set proper maximum register for MUIC regmap Krzysztof Kozlowski
@ 2013-12-20 13:58 ` Lee Jones
0 siblings, 0 replies; 4+ messages in thread
From: Lee Jones @ 2013-12-20 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Samuel Ortiz, linux-kernel, Kyungmin Park, Marek Szyprowski
On Fri, 20 Dec 2013, Krzysztof Kozlowski wrote:
> The MUIC block in max77693 has different I2C address than PMIC. The
> driver allocated two regmaps: for PMIC and MUIC. However it used the
> same regmap_config (with max_register field) for both regmaps. Actual
> maximum address of register for MUIC is different than for PMIC.
>
> Define another regmap_config for MUIC with proper max_register value.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
> drivers/mfd/max77693.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
Applied, thanks.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-12-20 13:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-20 9:35 [PATCH 1/2] mfd: max77686: fix regmap resource leak on driver remove Krzysztof Kozlowski
2013-12-20 9:35 ` [PATCH 2/2] mfd: max77693: Set proper maximum register for MUIC regmap Krzysztof Kozlowski
2013-12-20 13:58 ` Lee Jones
2013-12-20 13:56 ` [PATCH 1/2] mfd: max77686: fix regmap resource leak on driver remove Lee Jones
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.