All of lore.kernel.org
 help / color / mirror / Atom feed
* [Xenomai] How to port Linux 3.2.21 to beaglebone (TI AM3358 Cortex A8 SoC)
@ 2014-01-08 11:39 tianlangroot
  2014-01-08 12:13 ` Gilles Chanteperdrix
  0 siblings, 1 reply; 3+ messages in thread
From: tianlangroot @ 2014-01-08 11:39 UTC (permalink / raw)
  To: xenomai

As the TI AM3358 is not supported in 3.2.21 mainline kernel, I want to use the slightly patched kernel from linux-omap for Xenomai, but I don't know where should be changed in the Linux 3.2.21 source code. Can anyone help me? 




tianlangroot@gmail.com

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [Xenomai] How to port Linux 3.2.21 to beaglebone (TI AM3358 Cortex A8 SoC)
  2014-01-08 11:39 [Xenomai] How to port Linux 3.2.21 to beaglebone (TI AM3358 Cortex A8 SoC) tianlangroot
@ 2014-01-08 12:13 ` Gilles Chanteperdrix
       [not found]   ` <2014010820435085431023@gmail.com>
  0 siblings, 1 reply; 3+ messages in thread
From: Gilles Chanteperdrix @ 2014-01-08 12:13 UTC (permalink / raw)
  To: tianlangroot@gmail.com; +Cc: xenomai

On 01/08/2014 12:39 PM, tianlangroot@gmail.com wrote:
> As the TI AM3358 is not supported in 3.2.21 mainline kernel, I want
> to use the slightly patched kernel from linux-omap for Xenomai, but I
> don't know where should be changed in the Linux 3.2.21 source code.
> Can anyone help me?

Well, to do that, you have to apply xenomai patch to the linux-omap
kernel and fix the conflicts. But:
- the I-pipe patch for 3.2.21 has known bugs
- there is support for the beaglebone processor for 3.5, 3.8, 3.10,
without the bugs.

So, the question is: are you sure this is really what you want to do?

-- 
                                                                Gilles.


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [Xenomai] How to port Linux 3.2.21 to beaglebone (TI AM3358 Cortex A8 SoC)
       [not found]   ` <2014010820435085431023@gmail.com>
@ 2014-01-08 12:46     ` Gilles Chanteperdrix
  0 siblings, 0 replies; 3+ messages in thread
From: Gilles Chanteperdrix @ 2014-01-08 12:46 UTC (permalink / raw)
  To: tianlangroot@gmail.com; +Cc: Xenomai

On 01/08/2014 01:43 PM, tianlangroot@gmail.com wrote:
>     I am glad you have read my letter.
>     I have patched the Xenomai-2.6.1 to the Linux Kernel linux-omap 3.2.21. When I applied the patch to the target kernel it seems ok. 
> Now the problem is I don't know how to modify the hardware-dependent part for my board. Because I am a freshman about porting the linux kernel.
> I hope you can help me.

I am certainly not going to fix conflicts between a buggy patch and a
non-mainline kernel. So, I am afraid no, I will not help you.

However, same question again: why not using xenomai 2.6.3 and one of the
I-pipe patches it contains, including for beaglebone?

Please no top-posting or private messages.

Regards.

-- 
                                                                Gilles.


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2014-01-08 12:46 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-08 11:39 [Xenomai] How to port Linux 3.2.21 to beaglebone (TI AM3358 Cortex A8 SoC) tianlangroot
2014-01-08 12:13 ` Gilles Chanteperdrix
     [not found]   ` <2014010820435085431023@gmail.com>
2014-01-08 12:46     ` Gilles Chanteperdrix

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.