Re: [PATCH 3/3] memstick: Add realtek USB memstick host driver

[Dan Carpenter <dan.carpenter@oracle.com>]

On Tue, Jan 14, 2014 at 03:47:36PM +0800, rogerable@realtek.com wrote:
> +static int ms_pull_ctl_disable(struct rtsx_ucr *ucr)
> +{
> +	rtsx_usb_init_cmd(ucr);
> +
> +	if (CHECK_PKG(ucr, LQFP48)) {
> +		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
> +				CARD_PULL_CTL1, 0xFF, 0x55);
> +		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
> +				CARD_PULL_CTL2, 0xFF, 0x55);
> +		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
> +				CARD_PULL_CTL3, 0xFF, 0x95);
> +		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
> +				CARD_PULL_CTL4, 0xFF, 0x55);
> +		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
> +				CARD_PULL_CTL5, 0xFF, 0x55);
> +		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
> +				CARD_PULL_CTL6, 0xFF, 0xA5);
> +	} else {
> +		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
> +				CARD_PULL_CTL1, 0xFF, 0x65);
> +		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
> +				CARD_PULL_CTL2, 0xFF, 0x55);
> +		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
> +				CARD_PULL_CTL3, 0xFF, 0x95);
> +		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
> +				CARD_PULL_CTL4, 0xFF, 0x55);
> +		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
> +				CARD_PULL_CTL5, 0xFF, 0x56);
> +		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
> +				CARD_PULL_CTL6, 0xFF, 0x59);
> +	}
> +

I'm fine with this patch going in as-is, but I just wanted to comment on
this for future reference/cleanups.  These blocks where all the lines
are over 80 characters are hard to look at.  We could break it into
separate functions.

static int ms_pull_ctl_disable_lqfp48(struct rtsx_ucr *ucr)
{
	rtsx_usb_init_cmd(ucr);

	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55);
	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95);
	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55);
	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5);

	return rtsx_usb_send_cmd(ucr, MODE_C, 100);
}

Or another option would be to remove the "CARD_" prefix.  I don't think
we would miss it.

	if (CHECK_PKG(ucr, LQFP48)) {
		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, PULL_CTL1, 0xFF, 0x55);
		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, PULL_CTL2, 0xFF, 0x55);
		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, PULL_CTL3, 0xFF, 0x95);
		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, PULL_CTL4, 0xFF, 0x55);
		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, PULL_CTL5, 0xFF, 0x55);
		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, PULL_CTL6, 0xFF, 0xA5);
	} else {
		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, PULL_CTL1, 0xFF, 0x65);
		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, PULL_CTL2, 0xFF, 0x55);
		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, PULL_CTL3, 0xFF, 0x95);
		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, PULL_CTL4, 0xFF, 0x55);
		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, PULL_CTL5, 0xFF, 0x56);
		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, PULL_CTL6, 0xFF, 0x59);
	}

Another option might be to remove the "_usb" from the
rtsx_usb_add_cmd().

Just some ideas.

regards,
dan carpenter