Re: usb disk recognized but fails

[Sarah Sharp <sarah.a.sharp@linux.intel.com>]

Cc-ing the USB storage list, in case this device needs some quirk.

On Wed, Jan 15, 2014 at 03:47:39PM +0100, Milan Svoboda wrote:
> The SATA adapter has a power input, but it is not used, it is connected to the
> PC with Y-type USB cable.
> 
> The disk works with my "smart" TV, it works with Windows on the same machine,
> it also had worked some time ago with Linux, but now it shows the following:

Do you know which kernel version it worked with?  What version are you
currently running?  Please run `uname -a`.

> [ 2192.027213] usb 1-3: new high-speed USB device number 5 using xhci_hcd
> [ 2192.042323] ums-cypress 1-3:1.0: USB Mass Storage device detected
> [ 2192.042500] scsi9 : usb-storage 1-3:1.0
> [ 2193.044219] scsi 9:0:0:0: Direct-Access     WDC WD64 00BPVT-00HXZT0        PQ: 0 ANSI: 0
> [ 2193.045083] sd 9:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
> [ 2193.045240] sd 9:0:0:0: [sdb] Write Protect is off
> [ 2193.045245] sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00
> [ 2193.045384] sd 9:0:0:0: [sdb] No Caching mode page found
> [ 2193.045388] sd 9:0:0:0: [sdb] Assuming drive cache: write through
> [ 2193.046259] sd 9:0:0:0: [sdb] No Caching mode page found
> [ 2193.046264] sd 9:0:0:0: [sdb] Assuming drive cache: write through
> [ 2193.054389]  sdb: sdb1
> [ 2193.055092] sd 9:0:0:0: [sdb] No Caching mode page found
> [ 2193.055095] sd 9:0:0:0: [sdb] Assuming drive cache: write through
> [ 2193.055098] sd 9:0:0:0: [sdb] Attached SCSI disk
> [ 2200.821345] usb 1-3: reset high-speed USB device number 5 using xhci_hcd
> [ 2200.835063] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bc71e480
> [ 2200.835068] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bc71e4c0
> [ 2267.897715] sd 9:0:0:0: [sdb] Unhandled sense code
> [ 2267.897719] sd 9:0:0:0: [sdb]  
> [ 2267.897721] Result: hostbyte=0x07 driverbyte=0x08
> [ 2267.897722] sd 9:0:0:0: [sdb]  
> [ 2267.897724] Sense Key : 0x4 [current] 
> [ 2267.897735] sd 9:0:0:0: [sdb]  
> [ 2267.897736] ASC=0x0 ASCQ=0x0
> [ 2267.897738] sd 9:0:0:0: [sdb] CDB: 
> [ 2267.897740] cdb[0]=0x28: 28 00 4a 85 6e af 00 00 08 00
> [ 2267.897746] end_request: I/O error, dev sdb, sector 1250258607
> [ 2267.897750] Buffer I/O error on device sdb1, logical block 625129272
> [ 2267.897752] Buffer I/O error on device sdb1, logical block 625129273
> [ 2267.897753] Buffer I/O error on device sdb1, logical block 625129274
> [ 2267.897754] Buffer I/O error on device sdb1, logical block 625129275
> [ 2270.884154] usb 1-3: USB disconnect, device number 5
> 
> Bus 001 Device 010: ID 14cd:6116 Super Top M6116 SATA Bridge
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               2.00
>   bDeviceClass            0 (Defined at Interface level)
>   bDeviceSubClass         0 
>   bDeviceProtocol         0 
>   bMaxPacketSize0        64
>   idVendor           0x14cd Super Top
>   idProduct          0x6116 M6116 SATA Bridge
>   bcdDevice            1.50
>   iManufacturer           1 Super Top   
>   iProduct                3 USB 2.0  SATA BRIDGE   
>   iSerial                 2 M6116018VE15
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           32
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0 
>     bmAttributes         0xc0
>       Self Powered
>     MaxPower                2mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass         8 Mass Storage
>       bInterfaceSubClass      6 SCSI
>       bInterfaceProtocol     80 Bulk-Only
>       iInterface              0 
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0200  1x 512 bytes
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x02  EP 2 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0200  1x 512 bytes
>         bInterval               0
> Device Qualifier (for other device speed):
>   bLength                10
>   bDescriptorType         6
>   bcdUSB               2.00
>   bDeviceClass            0 (Defined at Interface level)
>   bDeviceSubClass         0 
>   bDeviceProtocol         0 
>   bMaxPacketSize0        64
>   bNumConfigurations      1
> Device Status:     0x0001
>   Self Powered
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html