From: Mel Gorman <mgorman@suse.de>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: [PATCH] mm: numa: Initialse numa balancing after jump label initialisation
Date: Mon, 27 Jan 2014 15:51:27 +0000 [thread overview]
Message-ID: <20140127155127.GJ4963@suse.de> (raw)
The command line parsing takes place before jump labels are initialised which
generates a warning if numa_balancing= is specified and CONFIG_JUMP_LABEL
is set. On older kernls before commit c4b2c0c5 (static_key: WARN on
usage before jump_label_init was called) the kernel would have crashed.
This patch enables automatic numa balancing later in the initialisation
process if numa_balancing= is specified.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Stable <stable@vger.kernel.org>
---
mm/mempolicy.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 0cd2c4d..5223684 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2657,7 +2657,7 @@ void mpol_free_shared_policy(struct shared_policy *p)
}
#ifdef CONFIG_NUMA_BALANCING
-static bool __initdata numabalancing_override;
+static int __initdata numabalancing_override;
static void __init check_numabalancing_enable(void)
{
@@ -2666,9 +2666,14 @@ static void __init check_numabalancing_enable(void)
if (IS_ENABLED(CONFIG_NUMA_BALANCING_DEFAULT_ENABLED))
numabalancing_default = true;
+ /* Parsed by setup_numabalancing. override == 1 enables, -1 disables */
+ if (numabalancing_override)
+ set_numabalancing_state(numabalancing_override == 1);
+
if (nr_node_ids > 1 && !numabalancing_override) {
- printk(KERN_INFO "Enabling automatic NUMA balancing. "
- "Configure with numa_balancing= or sysctl");
+ printk(KERN_INFO "%s automatic NUMA balancing. "
+ "Configure with numa_balancing= or sysctl",
+ numabalancing_default ? "Enabling" : "Disabling");
set_numabalancing_state(numabalancing_default);
}
}
@@ -2678,13 +2683,12 @@ static int __init setup_numabalancing(char *str)
int ret = 0;
if (!str)
goto out;
- numabalancing_override = true;
if (!strcmp(str, "enable")) {
- set_numabalancing_state(true);
+ numabalancing_override = 1;
ret = 1;
} else if (!strcmp(str, "disable")) {
- set_numabalancing_state(false);
+ numabalancing_override = -1;
ret = 1;
}
out:
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
WARNING: multiple messages have this Message-ID (diff)
From: Mel Gorman <mgorman@suse.de>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: [PATCH] mm: numa: Initialse numa balancing after jump label initialisation
Date: Mon, 27 Jan 2014 15:51:27 +0000 [thread overview]
Message-ID: <20140127155127.GJ4963@suse.de> (raw)
The command line parsing takes place before jump labels are initialised which
generates a warning if numa_balancing= is specified and CONFIG_JUMP_LABEL
is set. On older kernls before commit c4b2c0c5 (static_key: WARN on
usage before jump_label_init was called) the kernel would have crashed.
This patch enables automatic numa balancing later in the initialisation
process if numa_balancing= is specified.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Stable <stable@vger.kernel.org>
---
mm/mempolicy.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 0cd2c4d..5223684 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2657,7 +2657,7 @@ void mpol_free_shared_policy(struct shared_policy *p)
}
#ifdef CONFIG_NUMA_BALANCING
-static bool __initdata numabalancing_override;
+static int __initdata numabalancing_override;
static void __init check_numabalancing_enable(void)
{
@@ -2666,9 +2666,14 @@ static void __init check_numabalancing_enable(void)
if (IS_ENABLED(CONFIG_NUMA_BALANCING_DEFAULT_ENABLED))
numabalancing_default = true;
+ /* Parsed by setup_numabalancing. override == 1 enables, -1 disables */
+ if (numabalancing_override)
+ set_numabalancing_state(numabalancing_override == 1);
+
if (nr_node_ids > 1 && !numabalancing_override) {
- printk(KERN_INFO "Enabling automatic NUMA balancing. "
- "Configure with numa_balancing= or sysctl");
+ printk(KERN_INFO "%s automatic NUMA balancing. "
+ "Configure with numa_balancing= or sysctl",
+ numabalancing_default ? "Enabling" : "Disabling");
set_numabalancing_state(numabalancing_default);
}
}
@@ -2678,13 +2683,12 @@ static int __init setup_numabalancing(char *str)
int ret = 0;
if (!str)
goto out;
- numabalancing_override = true;
if (!strcmp(str, "enable")) {
- set_numabalancing_state(true);
+ numabalancing_override = 1;
ret = 1;
} else if (!strcmp(str, "disable")) {
- set_numabalancing_state(false);
+ numabalancing_override = -1;
ret = 1;
}
out:
next reply other threads:[~2014-01-27 15:51 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-27 15:51 Mel Gorman [this message]
2014-01-27 15:51 ` [PATCH] mm: numa: Initialse numa balancing after jump label initialisation Mel Gorman
2014-01-27 22:12 ` Rik van Riel
2014-01-27 22:12 ` Rik van Riel
2014-01-27 22:43 ` Andrew Morton
2014-01-27 22:43 ` Andrew Morton
2014-01-28 8:49 ` Mel Gorman
2014-01-28 8:49 ` Mel Gorman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140127155127.GJ4963@suse.de \
--to=mgorman@suse.de \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=riel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.