From: Matt Porter <mporter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
Tim Kryger <tim.kryger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Christian Daudt <bcm-xK7y4jjYLqYh9ZMKESR00Q@public.gmane.org>,
Devicetree List
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Linux I2C List
<linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Linux ARM Kernel List
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
Linux Kernel Mailing List
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH 0/6] BCM59056 PMU regulator support
Date: Tue, 4 Feb 2014 09:34:09 -0500 [thread overview]
Message-ID: <20140204143409.GB4627@beef> (raw)
In-Reply-To: <20140204134043.GG13529@lee--X1>
On Tue, Feb 04, 2014 at 01:40:43PM +0000, Lee Jones wrote:
> > The BCM59056 is a multi-function power management unit used with the
> > BCM281xx family of SoCs. This series adds an MFD and voltage regulator
> > driver to support the BCM59056. The bcm28155-ap DT support is updated
> > to enable use of regulators on the otg and sdhci peripherals.
> >
> > Matt Porter (6):
> > i2c: bcm-kona: register with subsys_initcall
> > regulator: add bcm59056 pmu DT binding
> > mfd: add bcm59056 pmu driver
> > regulator: add bcm59056 regulator driver
> > ARM: configs: bcm_defconfig: enable bcm59056 regulator support
> > ARM: dts: add bcm59056 pmu support and enable for bcm28155-ap
> >
> > .../devicetree/bindings/regulator/bcm59056.txt | 37 ++
> > arch/arm/boot/dts/bcm28155-ap.dts | 41 ++
> > arch/arm/boot/dts/bcm59056.dtsi | 158 ++++++++
> > arch/arm/configs/bcm_defconfig | 7 +
> > drivers/i2c/busses/i2c-bcm-kona.c | 14 +-
> > drivers/mfd/Kconfig | 8 +
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/bcm59056.c | 119 ++++++
> > drivers/regulator/Kconfig | 8 +
> > drivers/regulator/Makefile | 1 +
> > drivers/regulator/bcm59056-regulator.c | 445 +++++++++++++++++++++
> > include/linux/mfd/bcm59056.h | 35 ++
> > 12 files changed, 873 insertions(+), 1 deletion(-)
> > create mode 100644 Documentation/devicetree/bindings/regulator/bcm59056.txt
> > create mode 100644 arch/arm/boot/dts/bcm59056.dtsi
> > create mode 100644 drivers/mfd/bcm59056.c
> > create mode 100644 drivers/regulator/bcm59056-regulator.c
> > create mode 100644 include/linux/mfd/bcm59056.h
>
> FYI: Mark's email address is not correct. Not sure where you pulled
> this one up from, but he doesn't have access to it anymore.
Thanks, I already updated (it was a stale .mutt/aliases entry here) it
after the bounces.
-Matt
WARNING: multiple messages have this Message-ID (diff)
From: mporter@linaro.org (Matt Porter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/6] BCM59056 PMU regulator support
Date: Tue, 4 Feb 2014 09:34:09 -0500 [thread overview]
Message-ID: <20140204143409.GB4627@beef> (raw)
In-Reply-To: <20140204134043.GG13529@lee--X1>
On Tue, Feb 04, 2014 at 01:40:43PM +0000, Lee Jones wrote:
> > The BCM59056 is a multi-function power management unit used with the
> > BCM281xx family of SoCs. This series adds an MFD and voltage regulator
> > driver to support the BCM59056. The bcm28155-ap DT support is updated
> > to enable use of regulators on the otg and sdhci peripherals.
> >
> > Matt Porter (6):
> > i2c: bcm-kona: register with subsys_initcall
> > regulator: add bcm59056 pmu DT binding
> > mfd: add bcm59056 pmu driver
> > regulator: add bcm59056 regulator driver
> > ARM: configs: bcm_defconfig: enable bcm59056 regulator support
> > ARM: dts: add bcm59056 pmu support and enable for bcm28155-ap
> >
> > .../devicetree/bindings/regulator/bcm59056.txt | 37 ++
> > arch/arm/boot/dts/bcm28155-ap.dts | 41 ++
> > arch/arm/boot/dts/bcm59056.dtsi | 158 ++++++++
> > arch/arm/configs/bcm_defconfig | 7 +
> > drivers/i2c/busses/i2c-bcm-kona.c | 14 +-
> > drivers/mfd/Kconfig | 8 +
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/bcm59056.c | 119 ++++++
> > drivers/regulator/Kconfig | 8 +
> > drivers/regulator/Makefile | 1 +
> > drivers/regulator/bcm59056-regulator.c | 445 +++++++++++++++++++++
> > include/linux/mfd/bcm59056.h | 35 ++
> > 12 files changed, 873 insertions(+), 1 deletion(-)
> > create mode 100644 Documentation/devicetree/bindings/regulator/bcm59056.txt
> > create mode 100644 arch/arm/boot/dts/bcm59056.dtsi
> > create mode 100644 drivers/mfd/bcm59056.c
> > create mode 100644 drivers/regulator/bcm59056-regulator.c
> > create mode 100644 include/linux/mfd/bcm59056.h
>
> FYI: Mark's email address is not correct. Not sure where you pulled
> this one up from, but he doesn't have access to it anymore.
Thanks, I already updated (it was a stale .mutt/aliases entry here) it
after the bounces.
-Matt
WARNING: multiple messages have this Message-ID (diff)
From: Matt Porter <mporter@linaro.org>
To: Lee Jones <lee.jones@linaro.org>
Cc: Wolfram Sang <wsa@the-dreams.de>,
Tim Kryger <tim.kryger@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Samuel Ortiz <sameo@linux.intel.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Christian Daudt <bcm@fixthebug.org>,
Devicetree List <devicetree@vger.kernel.org>,
Linux I2C List <linux-i2c@vger.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 0/6] BCM59056 PMU regulator support
Date: Tue, 4 Feb 2014 09:34:09 -0500 [thread overview]
Message-ID: <20140204143409.GB4627@beef> (raw)
In-Reply-To: <20140204134043.GG13529@lee--X1>
On Tue, Feb 04, 2014 at 01:40:43PM +0000, Lee Jones wrote:
> > The BCM59056 is a multi-function power management unit used with the
> > BCM281xx family of SoCs. This series adds an MFD and voltage regulator
> > driver to support the BCM59056. The bcm28155-ap DT support is updated
> > to enable use of regulators on the otg and sdhci peripherals.
> >
> > Matt Porter (6):
> > i2c: bcm-kona: register with subsys_initcall
> > regulator: add bcm59056 pmu DT binding
> > mfd: add bcm59056 pmu driver
> > regulator: add bcm59056 regulator driver
> > ARM: configs: bcm_defconfig: enable bcm59056 regulator support
> > ARM: dts: add bcm59056 pmu support and enable for bcm28155-ap
> >
> > .../devicetree/bindings/regulator/bcm59056.txt | 37 ++
> > arch/arm/boot/dts/bcm28155-ap.dts | 41 ++
> > arch/arm/boot/dts/bcm59056.dtsi | 158 ++++++++
> > arch/arm/configs/bcm_defconfig | 7 +
> > drivers/i2c/busses/i2c-bcm-kona.c | 14 +-
> > drivers/mfd/Kconfig | 8 +
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/bcm59056.c | 119 ++++++
> > drivers/regulator/Kconfig | 8 +
> > drivers/regulator/Makefile | 1 +
> > drivers/regulator/bcm59056-regulator.c | 445 +++++++++++++++++++++
> > include/linux/mfd/bcm59056.h | 35 ++
> > 12 files changed, 873 insertions(+), 1 deletion(-)
> > create mode 100644 Documentation/devicetree/bindings/regulator/bcm59056.txt
> > create mode 100644 arch/arm/boot/dts/bcm59056.dtsi
> > create mode 100644 drivers/mfd/bcm59056.c
> > create mode 100644 drivers/regulator/bcm59056-regulator.c
> > create mode 100644 include/linux/mfd/bcm59056.h
>
> FYI: Mark's email address is not correct. Not sure where you pulled
> this one up from, but he doesn't have access to it anymore.
Thanks, I already updated (it was a stale .mutt/aliases entry here) it
after the bounces.
-Matt
next prev parent reply other threads:[~2014-02-04 14:34 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-04 12:19 [PATCH 0/6] BCM59056 PMU regulator support Matt Porter
2014-02-04 12:19 ` Matt Porter
2014-02-04 12:19 ` Matt Porter
[not found] ` <1391516352-32359-1-git-send-email-mporter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-02-04 12:19 ` [PATCH 1/6] i2c: bcm-kona: register with subsys_initcall Matt Porter
2014-02-04 12:19 ` Matt Porter
2014-02-04 12:19 ` Matt Porter
[not found] ` <1391516352-32359-2-git-send-email-mporter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-02-05 9:08 ` Wolfram Sang
2014-02-05 9:08 ` Wolfram Sang
2014-02-05 9:08 ` Wolfram Sang
2014-02-05 15:18 ` Matt Porter
2014-02-05 15:18 ` Matt Porter
2014-02-05 15:30 ` Alan Stern
2014-02-05 15:30 ` Alan Stern
2014-02-05 15:30 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1402051028350.1312-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2014-02-05 16:19 ` Matt Porter
2014-02-05 16:19 ` Matt Porter
2014-02-05 16:19 ` Matt Porter
2014-02-04 12:19 ` [PATCH 5/6] ARM: configs: bcm_defconfig: enable bcm59056 regulator support Matt Porter
2014-02-04 12:19 ` Matt Porter
2014-02-04 12:19 ` Matt Porter
2014-02-04 13:40 ` [PATCH 0/6] BCM59056 PMU " Lee Jones
2014-02-04 13:40 ` Lee Jones
2014-02-04 13:40 ` Lee Jones
2014-02-04 14:34 ` Matt Porter [this message]
2014-02-04 14:34 ` Matt Porter
2014-02-04 14:34 ` Matt Porter
2014-02-04 12:19 ` [PATCH 2/6] regulator: add bcm59056 pmu DT binding Matt Porter
2014-02-04 12:19 ` Matt Porter
[not found] ` <1391516352-32359-3-git-send-email-mporter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-02-04 17:23 ` Mark Brown
2014-02-04 17:23 ` Mark Brown
2014-02-04 17:23 ` Mark Brown
2014-02-04 21:16 ` Matt Porter
2014-02-04 21:16 ` Matt Porter
2014-02-04 23:21 ` Mark Brown
2014-02-04 23:21 ` Mark Brown
2014-02-04 23:21 ` Mark Brown
2014-02-04 12:19 ` [PATCH 3/6] mfd: add bcm59056 pmu driver Matt Porter
2014-02-04 12:19 ` Matt Porter
2014-02-04 13:29 ` Lee Jones
2014-02-04 13:29 ` Lee Jones
2014-02-04 14:31 ` Matt Porter
2014-02-04 14:31 ` Matt Porter
2014-02-04 14:47 ` Lee Jones
2014-02-04 14:47 ` Lee Jones
2014-02-04 14:47 ` Lee Jones
2014-02-04 15:01 ` Matt Porter
2014-02-04 15:01 ` Matt Porter
2014-02-04 15:01 ` Matt Porter
2014-02-04 15:20 ` Lee Jones
2014-02-04 15:20 ` Lee Jones
2014-02-04 15:20 ` Lee Jones
2014-02-04 16:59 ` Mark Brown
2014-02-04 16:59 ` Mark Brown
2014-02-04 16:59 ` Mark Brown
2014-02-04 17:08 ` Lee Jones
2014-02-04 17:08 ` Lee Jones
2014-02-04 17:11 ` Mark Brown
2014-02-04 17:11 ` Mark Brown
2014-02-04 17:11 ` Mark Brown
2014-02-04 12:19 ` [PATCH 4/6] regulator: add bcm59056 regulator driver Matt Porter
2014-02-04 12:19 ` Matt Porter
[not found] ` <1391516352-32359-5-git-send-email-mporter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-02-04 17:28 ` Mark Brown
2014-02-04 17:28 ` Mark Brown
2014-02-04 17:28 ` Mark Brown
2014-02-04 21:29 ` Matt Porter
2014-02-04 21:29 ` Matt Porter
2014-02-04 23:22 ` Mark Brown
2014-02-04 23:22 ` Mark Brown
2014-02-04 23:22 ` Mark Brown
2014-02-04 12:19 ` [PATCH 6/6] ARM: dts: add bcm59056 pmu support and enable for bcm28155-ap Matt Porter
2014-02-04 12:19 ` Matt Porter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140204143409.GB4627@beef \
--to=mporter-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=bcm-xK7y4jjYLqYh9ZMKESR00Q@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=tim.kryger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.