From: Nicolin Chen <Guangyu.Chen@freescale.com>
To: Xiubo Li <Li.Xiubo@freescale.com>
Cc: broonie@kernel.org, lgirdwood@gmail.com, perex@perex.cz,
tiwai@suse.de, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ASoC: fsl-esai: fix ESAI TDM slot setting
Date: Mon, 10 Feb 2014 15:50:32 +0800 [thread overview]
Message-ID: <20140210075031.GA16453@MrMyself> (raw)
In-Reply-To: <1392014837-22308-1-git-send-email-Li.Xiubo@freescale.com>
On Mon, Feb 10, 2014 at 02:47:17PM +0800, Xiubo Li wrote:
> Cc: Nicolin Chen <Guangyu.Chen@freescale.com>
> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
> ---
> sound/soc/fsl/fsl_esai.c | 4 ++--
> sound/soc/fsl/fsl_esai.h | 2 +-
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
> index d0c72ed..c84026c 100644
> --- a/sound/soc/fsl/fsl_esai.c
> +++ b/sound/soc/fsl/fsl_esai.c
> @@ -326,7 +326,7 @@ static int fsl_esai_set_dai_tdm_slot(struct snd_soc_dai *dai, u32 tx_mask,
> regmap_update_bits(esai_priv->regmap, REG_ESAI_TSMA,
> ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(tx_mask));
> regmap_update_bits(esai_priv->regmap, REG_ESAI_TSMB,
> - ESAI_xSMA_xS_MASK, ESAI_xSMB_xS(tx_mask));
> + ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(tx_mask));
>
> regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR,
> ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots));
> @@ -334,7 +334,7 @@ static int fsl_esai_set_dai_tdm_slot(struct snd_soc_dai *dai, u32 tx_mask,
> regmap_update_bits(esai_priv->regmap, REG_ESAI_RSMA,
> ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(rx_mask));
> regmap_update_bits(esai_priv->regmap, REG_ESAI_RSMB,
> - ESAI_xSMA_xS_MASK, ESAI_xSMB_xS(rx_mask));
> + ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(rx_mask));
>
> esai_priv->slot_width = slot_width;
>
> diff --git a/sound/soc/fsl/fsl_esai.h b/sound/soc/fsl/fsl_esai.h
> index 9c9f957..75e1403 100644
> --- a/sound/soc/fsl/fsl_esai.h
> +++ b/sound/soc/fsl/fsl_esai.h
> @@ -322,7 +322,7 @@
> #define ESAI_xSMB_xS_SHIFT 0
> #define ESAI_xSMB_xS_WIDTH 16
> #define ESAI_xSMB_xS_MASK (((1 << ESAI_xSMB_xS_WIDTH) - 1) << ESAI_xSMB_xS_SHIFT)
> -#define ESAI_xSMB_xS(v) (((v) >> ESAI_xSMA_xS_WIDTH) & ESAI_xSMA_xS_MASK)
> +#define ESAI_xSMB_xS(v) (((v) >> ESAI_xSMA_xS_WIDTH) & ESAI_xSMB_xS_MASK)
It should use ESAI_xSMB_xS_WIDTH.
Otherwise, it looks fine. Thank you.
Acked-by: Nicolin Chen <Guangyu.Chen@freescale.com>
---
>
> /* Port C Direction Register -- REG_ESAI_PRRC 0xF8 */
> #define ESAI_PRRC_PDC_SHIFT 0
> --
> 1.8.4
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Nicolin Chen <Guangyu.Chen@freescale.com>
To: Xiubo Li <Li.Xiubo@freescale.com>
Cc: <broonie@kernel.org>, <lgirdwood@gmail.com>, <perex@perex.cz>,
<tiwai@suse.de>, <alsa-devel@alsa-project.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] ASoC: fsl-esai: fix ESAI TDM slot setting
Date: Mon, 10 Feb 2014 15:50:32 +0800 [thread overview]
Message-ID: <20140210075031.GA16453@MrMyself> (raw)
In-Reply-To: <1392014837-22308-1-git-send-email-Li.Xiubo@freescale.com>
On Mon, Feb 10, 2014 at 02:47:17PM +0800, Xiubo Li wrote:
> Cc: Nicolin Chen <Guangyu.Chen@freescale.com>
> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
> ---
> sound/soc/fsl/fsl_esai.c | 4 ++--
> sound/soc/fsl/fsl_esai.h | 2 +-
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
> index d0c72ed..c84026c 100644
> --- a/sound/soc/fsl/fsl_esai.c
> +++ b/sound/soc/fsl/fsl_esai.c
> @@ -326,7 +326,7 @@ static int fsl_esai_set_dai_tdm_slot(struct snd_soc_dai *dai, u32 tx_mask,
> regmap_update_bits(esai_priv->regmap, REG_ESAI_TSMA,
> ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(tx_mask));
> regmap_update_bits(esai_priv->regmap, REG_ESAI_TSMB,
> - ESAI_xSMA_xS_MASK, ESAI_xSMB_xS(tx_mask));
> + ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(tx_mask));
>
> regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR,
> ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots));
> @@ -334,7 +334,7 @@ static int fsl_esai_set_dai_tdm_slot(struct snd_soc_dai *dai, u32 tx_mask,
> regmap_update_bits(esai_priv->regmap, REG_ESAI_RSMA,
> ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(rx_mask));
> regmap_update_bits(esai_priv->regmap, REG_ESAI_RSMB,
> - ESAI_xSMA_xS_MASK, ESAI_xSMB_xS(rx_mask));
> + ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(rx_mask));
>
> esai_priv->slot_width = slot_width;
>
> diff --git a/sound/soc/fsl/fsl_esai.h b/sound/soc/fsl/fsl_esai.h
> index 9c9f957..75e1403 100644
> --- a/sound/soc/fsl/fsl_esai.h
> +++ b/sound/soc/fsl/fsl_esai.h
> @@ -322,7 +322,7 @@
> #define ESAI_xSMB_xS_SHIFT 0
> #define ESAI_xSMB_xS_WIDTH 16
> #define ESAI_xSMB_xS_MASK (((1 << ESAI_xSMB_xS_WIDTH) - 1) << ESAI_xSMB_xS_SHIFT)
> -#define ESAI_xSMB_xS(v) (((v) >> ESAI_xSMA_xS_WIDTH) & ESAI_xSMA_xS_MASK)
> +#define ESAI_xSMB_xS(v) (((v) >> ESAI_xSMA_xS_WIDTH) & ESAI_xSMB_xS_MASK)
It should use ESAI_xSMB_xS_WIDTH.
Otherwise, it looks fine. Thank you.
Acked-by: Nicolin Chen <Guangyu.Chen@freescale.com>
---
>
> /* Port C Direction Register -- REG_ESAI_PRRC 0xF8 */
> #define ESAI_PRRC_PDC_SHIFT 0
> --
> 1.8.4
>
>
next prev parent reply other threads:[~2014-02-10 7:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-10 6:47 [PATCH] ASoC: fsl-esai: fix ESAI TDM slot setting Xiubo Li
2014-02-10 6:47 ` Xiubo Li
2014-02-10 7:50 ` Nicolin Chen [this message]
2014-02-10 7:50 ` Nicolin Chen
2014-02-10 8:18 ` Li.Xiubo
2014-02-10 8:24 ` Li.Xiubo
2014-02-10 8:15 ` Nicolin Chen
2014-02-10 13:40 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140210075031.GA16453@MrMyself \
--to=guangyu.chen@freescale.com \
--cc=Li.Xiubo@freescale.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.