From: Magnus Damm <magnus.damm@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: shmobile: Remove legacy r8a7790 DT clocks
Date: Wed, 12 Feb 2014 04:09:37 +0000 [thread overview]
Message-ID: <20140212040937.9955.38466.sendpatchset@w520> (raw)
From: Magnus Damm <damm@opensource.se>
The DT device case is handled by CCF these days, so get
rid of DT devices from the legacy clocks for r8a7790.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/mach-shmobile/clock-r8a7790.c | 11 -----------
1 file changed, 11 deletions(-)
--- 0001/arch/arm/mach-shmobile/clock-r8a7790.c
+++ work/arch/arm/mach-shmobile/clock-r8a7790.c 2014-02-10 16:04:29.000000000 +0900
@@ -328,34 +328,23 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
- CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]),
- CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
CLKDEV_DEV_ID("i2c-rcar_gen2.1", &mstp_clks[MSTP930]),
- CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
CLKDEV_DEV_ID("i2c-rcar_gen2.2", &mstp_clks[MSTP929]),
- CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("i2c-rcar_gen2.3", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
CLKDEV_DEV_ID("r8a7790-vin.0", &mstp_clks[MSTP811]),
CLKDEV_DEV_ID("r8a7790-vin.1", &mstp_clks[MSTP810]),
CLKDEV_DEV_ID("r8a7790-vin.2", &mstp_clks[MSTP809]),
CLKDEV_DEV_ID("r8a7790-vin.3", &mstp_clks[MSTP808]),
- CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP502]),
CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP501]),
- CLKDEV_DEV_ID("ee200000.mmc", &mstp_clks[MSTP315]),
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
- CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]),
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
- CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]),
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]),
- CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
- CLKDEV_DEV_ID("ee160000.sd", &mstp_clks[MSTP311]),
CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]),
- CLKDEV_DEV_ID("ee220000.mmc", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
WARNING: multiple messages have this Message-ID (diff)
From: magnus.damm@gmail.com (Magnus Damm)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: shmobile: Remove legacy r8a7790 DT clocks
Date: Wed, 12 Feb 2014 13:09:37 +0900 [thread overview]
Message-ID: <20140212040937.9955.38466.sendpatchset@w520> (raw)
From: Magnus Damm <damm@opensource.se>
The DT device case is handled by CCF these days, so get
rid of DT devices from the legacy clocks for r8a7790.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/mach-shmobile/clock-r8a7790.c | 11 -----------
1 file changed, 11 deletions(-)
--- 0001/arch/arm/mach-shmobile/clock-r8a7790.c
+++ work/arch/arm/mach-shmobile/clock-r8a7790.c 2014-02-10 16:04:29.000000000 +0900
@@ -328,34 +328,23 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
- CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]),
- CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
CLKDEV_DEV_ID("i2c-rcar_gen2.1", &mstp_clks[MSTP930]),
- CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
CLKDEV_DEV_ID("i2c-rcar_gen2.2", &mstp_clks[MSTP929]),
- CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("i2c-rcar_gen2.3", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
CLKDEV_DEV_ID("r8a7790-vin.0", &mstp_clks[MSTP811]),
CLKDEV_DEV_ID("r8a7790-vin.1", &mstp_clks[MSTP810]),
CLKDEV_DEV_ID("r8a7790-vin.2", &mstp_clks[MSTP809]),
CLKDEV_DEV_ID("r8a7790-vin.3", &mstp_clks[MSTP808]),
- CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP502]),
CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP501]),
- CLKDEV_DEV_ID("ee200000.mmc", &mstp_clks[MSTP315]),
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
- CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]),
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
- CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]),
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]),
- CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
- CLKDEV_DEV_ID("ee160000.sd", &mstp_clks[MSTP311]),
CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]),
- CLKDEV_DEV_ID("ee220000.mmc", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
next reply other threads:[~2014-02-12 4:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-12 4:09 Magnus Damm [this message]
2014-02-12 4:09 ` [PATCH] ARM: shmobile: Remove legacy r8a7790 DT clocks Magnus Damm
2014-02-13 5:39 ` Simon Horman
2014-02-13 5:39 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140212040937.9955.38466.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.