All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Lokesh Vutla <lokeshvutla@ti.com>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	nm@ti.com, linux@arm.linux.org.uk, rnayak@ti.com, nsekhar@ti.com
Subject: Re: [PATCH V2 4/4] ARM: OMAP2+: AM43x: Use gptimer as clocksource
Date: Thu, 13 Feb 2014 15:19:19 -0800	[thread overview]
Message-ID: <20140213231919.GO28216@atomide.com> (raw)
In-Reply-To: <1391768486-2134-5-git-send-email-lokeshvutla@ti.com>

* Lokesh Vutla <lokeshvutla@ti.com> [140207 02:24]:
> From: Rajendra Nayak <rnayak@ti.com>
> 
> The SyncTimer in AM43x is clocked using the following two sources:
> 1) An inaccuarte 32k clock (CLK_32KHZ) derived from PER DPLL, causing system
>    time to go slowly (~10% deviation).
> 2) external 32KHz RTC clock, which may not always be available on board like
>    in the case of ePOS EVM
> 
> Use gptimer as clocksource instead, as is done in the case of AM335x
> (which does not have a SyncTimer). With this, system time keeping works
> accurately.

Hmm doesn't this also mean that PM for any deeper idle states won't
work properly?

Regards,

Tony
 
> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
>  arch/arm/mach-omap2/board-generic.c |    2 +-
>  arch/arm/mach-omap2/timer.c         |    3 ++-
>  2 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
> index 8e3daa1..5679464a 100644
> --- a/arch/arm/mach-omap2/board-generic.c
> +++ b/arch/arm/mach-omap2/board-generic.c
> @@ -229,7 +229,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
>  	.init_late	= am43xx_init_late,
>  	.init_irq	= omap_gic_of_init,
>  	.init_machine	= omap_generic_init,
> -	.init_time	= omap3_sync32k_timer_init,
> +	.init_time	= omap3_gptimer_timer_init,
>  	.dt_compat	= am43_boards_compat,
>  MACHINE_END
>  #endif
> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
> index 74044aa..b62de9f 100644
> --- a/arch/arm/mach-omap2/timer.c
> +++ b/arch/arm/mach-omap2/timer.c
> @@ -604,7 +604,8 @@ OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure",
>  			2, "timer_sys_ck", NULL);
>  #endif /* CONFIG_ARCH_OMAP3 */
>  
> -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
> +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
> +	defined(CONFIG_SOC_AM43XX)
>  OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
>  		       1, "timer_sys_ck", "ti,timer-alwon");
>  #endif
> -- 
> 1.7.9.5
> 

WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 4/4] ARM: OMAP2+: AM43x: Use gptimer as clocksource
Date: Thu, 13 Feb 2014 15:19:19 -0800	[thread overview]
Message-ID: <20140213231919.GO28216@atomide.com> (raw)
In-Reply-To: <1391768486-2134-5-git-send-email-lokeshvutla@ti.com>

* Lokesh Vutla <lokeshvutla@ti.com> [140207 02:24]:
> From: Rajendra Nayak <rnayak@ti.com>
> 
> The SyncTimer in AM43x is clocked using the following two sources:
> 1) An inaccuarte 32k clock (CLK_32KHZ) derived from PER DPLL, causing system
>    time to go slowly (~10% deviation).
> 2) external 32KHz RTC clock, which may not always be available on board like
>    in the case of ePOS EVM
> 
> Use gptimer as clocksource instead, as is done in the case of AM335x
> (which does not have a SyncTimer). With this, system time keeping works
> accurately.

Hmm doesn't this also mean that PM for any deeper idle states won't
work properly?

Regards,

Tony
 
> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
>  arch/arm/mach-omap2/board-generic.c |    2 +-
>  arch/arm/mach-omap2/timer.c         |    3 ++-
>  2 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
> index 8e3daa1..5679464a 100644
> --- a/arch/arm/mach-omap2/board-generic.c
> +++ b/arch/arm/mach-omap2/board-generic.c
> @@ -229,7 +229,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
>  	.init_late	= am43xx_init_late,
>  	.init_irq	= omap_gic_of_init,
>  	.init_machine	= omap_generic_init,
> -	.init_time	= omap3_sync32k_timer_init,
> +	.init_time	= omap3_gptimer_timer_init,
>  	.dt_compat	= am43_boards_compat,
>  MACHINE_END
>  #endif
> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
> index 74044aa..b62de9f 100644
> --- a/arch/arm/mach-omap2/timer.c
> +++ b/arch/arm/mach-omap2/timer.c
> @@ -604,7 +604,8 @@ OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure",
>  			2, "timer_sys_ck", NULL);
>  #endif /* CONFIG_ARCH_OMAP3 */
>  
> -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
> +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
> +	defined(CONFIG_SOC_AM43XX)
>  OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
>  		       1, "timer_sys_ck", "ti,timer-alwon");
>  #endif
> -- 
> 1.7.9.5
> 

  reply	other threads:[~2014-02-13 23:19 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-07 10:21 [PATCH V2 0/4] ARM: OMAP2+: AM43x: Enable in OMAP2PLUS and add ID for ES1.1 Lokesh Vutla
2014-02-07 10:21 ` Lokesh Vutla
2014-02-07 10:21 ` [PATCH V2 1/4] ARM: OMAP2+: AM43x: enable in default config Lokesh Vutla
2014-02-07 10:21   ` Lokesh Vutla
2014-02-07 10:21 ` [PATCH V2 2/4] ARM: OMAP2+: AM43x: Add ID for ES1.1 Lokesh Vutla
2014-02-07 10:21   ` Lokesh Vutla
2014-02-07 10:21 ` [PATCH V2 3/4] ARM: OMAP2+: AM43x: determine features Lokesh Vutla
2014-02-07 10:21   ` Lokesh Vutla
2014-02-07 10:21 ` [PATCH V2 4/4] ARM: OMAP2+: AM43x: Use gptimer as clocksource Lokesh Vutla
2014-02-07 10:21   ` Lokesh Vutla
2014-02-13 23:19   ` Tony Lindgren [this message]
2014-02-13 23:19     ` Tony Lindgren
2014-02-14  8:46     ` Rajendra Nayak
2014-02-14  8:46       ` Rajendra Nayak
2014-02-24 13:05       ` Lokesh Vutla
2014-02-24 13:05         ` Lokesh Vutla
2014-02-28 23:34         ` Tony Lindgren
2014-02-28 23:34           ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140213231919.GO28216@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=rnayak@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.