From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] mfd: twl4030-madc: Add devicetree support.
Date: Fri, 14 Feb 2014 13:48:15 +0000 [thread overview]
Message-ID: <20140214134815.GD13293@lee--X1> (raw)
In-Reply-To: <1392383861-14169-1-git-send-email-marek@goldelico.com>
> Signed-off-by: Marek Belisko <marek@goldelico.com>
> ---
> .../devicetree/bindings/mfd/twl4030-madc.txt | 18 +++++++++++++
> drivers/mfd/twl4030-madc.c | 31
> ++++++++++++++++++++--
Please separate these into different patches.
> 2 files changed, 47 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/twl4030-madc.txt
<snip>
> +++ b/drivers/mfd/twl4030-madc.c
> @@ -695,6 +695,29 @@ static int twl4030_madc_set_power(struct twl4030_madc_data *madc, int on)
> return 0;
> }
>
> +#ifdef CONFIG_OF
I believe we're heading for a more:
if (IS_ENABLED(CONFIG_OF))
... approach. I won't enforce it, but please consider using it.
> +static struct twl4030_madc_platform_data *
> + twl4030_madc_of_parse(struct platform_device *pdev)
> +{
> + struct twl4030_madc_platform_data *pdata;
> +
> + pdata = devm_kzalloc(&pdev->dev,
> + sizeof(struct twl4030_madc_platform_data), GFP_KERNEL);
s/struct twl4030_madc_platform_data/*pdata/
> + if (!pdata)
> + return ERR_PTR(-ENOMEM);
> +
> + pdata->irq_line = platform_get_irq(pdev, 0);
Why weren't 'resources' used in the original implementation?
> + return pdata;
> +}
> +
> +static const struct of_device_id twl4030_madc_dt_match_table[] = {
> + { .compatible = "ti,twl4030-madc" },
> + {},
> +};
> +
> +#endif
> +
> /*
> * Initialize MADC and request for threaded irq
> */
> @@ -706,8 +729,11 @@ static int twl4030_madc_probe(struct platform_device *pdev)
> u8 regval;
>
> if (!pdata) {
> - dev_err(&pdev->dev, "platform_data not available\n");
> - return -EINVAL;
> + pdata = twl4030_madc_of_parse(pdev);
> + if (!pdata) {
And if you received -ENOMEM?
> + dev_err(&pdev->dev, "platform_data not available\n");
> + return -EINVAL;
> + }
> }
> madc = kzalloc(sizeof(*madc), GFP_KERNEL);
> if (!madc)
> @@ -807,6 +833,7 @@ static struct platform_driver twl4030_madc_driver = {
> .driver = {
> .name = "twl4030_madc",
> .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(twl4030_madc_dt_match_table),
> },
> };
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: Marek Belisko <marek@goldelico.com>
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
rob@landley.net, linux@arm.linux.org.uk, grant.likely@linaro.org,
devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
hns@goldelico.com, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/2] mfd: twl4030-madc: Add devicetree support.
Date: Fri, 14 Feb 2014 13:48:15 +0000 [thread overview]
Message-ID: <20140214134815.GD13293@lee--X1> (raw)
In-Reply-To: <1392383861-14169-1-git-send-email-marek@goldelico.com>
> Signed-off-by: Marek Belisko <marek@goldelico.com>
> ---
> .../devicetree/bindings/mfd/twl4030-madc.txt | 18 +++++++++++++
> drivers/mfd/twl4030-madc.c | 31
> ++++++++++++++++++++--
Please separate these into different patches.
> 2 files changed, 47 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/twl4030-madc.txt
<snip>
> +++ b/drivers/mfd/twl4030-madc.c
> @@ -695,6 +695,29 @@ static int twl4030_madc_set_power(struct twl4030_madc_data *madc, int on)
> return 0;
> }
>
> +#ifdef CONFIG_OF
I believe we're heading for a more:
if (IS_ENABLED(CONFIG_OF))
... approach. I won't enforce it, but please consider using it.
> +static struct twl4030_madc_platform_data *
> + twl4030_madc_of_parse(struct platform_device *pdev)
> +{
> + struct twl4030_madc_platform_data *pdata;
> +
> + pdata = devm_kzalloc(&pdev->dev,
> + sizeof(struct twl4030_madc_platform_data), GFP_KERNEL);
s/struct twl4030_madc_platform_data/*pdata/
> + if (!pdata)
> + return ERR_PTR(-ENOMEM);
> +
> + pdata->irq_line = platform_get_irq(pdev, 0);
Why weren't 'resources' used in the original implementation?
> + return pdata;
> +}
> +
> +static const struct of_device_id twl4030_madc_dt_match_table[] = {
> + { .compatible = "ti,twl4030-madc" },
> + {},
> +};
> +
> +#endif
> +
> /*
> * Initialize MADC and request for threaded irq
> */
> @@ -706,8 +729,11 @@ static int twl4030_madc_probe(struct platform_device *pdev)
> u8 regval;
>
> if (!pdata) {
> - dev_err(&pdev->dev, "platform_data not available\n");
> - return -EINVAL;
> + pdata = twl4030_madc_of_parse(pdev);
> + if (!pdata) {
And if you received -ENOMEM?
> + dev_err(&pdev->dev, "platform_data not available\n");
> + return -EINVAL;
> + }
> }
> madc = kzalloc(sizeof(*madc), GFP_KERNEL);
> if (!madc)
> @@ -807,6 +833,7 @@ static struct platform_driver twl4030_madc_driver = {
> .driver = {
> .name = "twl4030_madc",
> .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(twl4030_madc_dt_match_table),
> },
> };
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2014-02-14 13:48 UTC|newest]
Thread overview: 145+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-14 13:17 [PATCH 1/2] mfd: twl4030-madc: Add devicetree support Marek Belisko
2014-02-14 13:17 ` Marek Belisko
2014-02-14 13:17 ` [PATCH 2/2] ARM: dts: twl4030: Add twl4030-madc node Marek Belisko
2014-02-14 13:17 ` Marek Belisko
2014-02-14 13:48 ` Lee Jones [this message]
2014-02-14 13:48 ` [PATCH 1/2] mfd: twl4030-madc: Add devicetree support Lee Jones
2014-02-14 14:53 ` Belisko Marek
2014-02-14 14:53 ` Belisko Marek
2014-02-14 14:53 ` Belisko Marek
2014-02-14 15:28 ` Lee Jones
2014-02-14 15:28 ` Lee Jones
2014-02-14 15:28 ` Lee Jones
2014-02-14 17:40 ` Sebastian Reichel
2014-02-14 17:40 ` Sebastian Reichel
2014-02-14 18:46 ` [RFCv1 1/4] mfd: twl4030-madc: Use managed resources Sebastian Reichel
2014-02-14 18:46 ` [RFCv1 2/4] mfd: twl4030-madc: Add DT support and convert to IIO framework Sebastian Reichel
2014-02-15 13:31 ` Belisko Marek
2014-02-15 13:31 ` Belisko Marek
2014-02-16 9:02 ` Sebastian Reichel
2014-02-16 9:02 ` Sebastian Reichel
2014-02-14 18:46 ` [RFCv1 3/4] Documentation: DT: Document twl4030-madc binding Sebastian Reichel
2014-02-14 18:46 ` [RFCv1 4/4] mfd: twl4030-madc: Move driver to drivers/iio/adc Sebastian Reichel
2014-02-22 12:47 ` Jonathan Cameron
2014-02-22 12:47 ` Jonathan Cameron
2014-02-23 0:35 ` Sebastian Reichel
2014-02-23 0:35 ` Sebastian Reichel
2014-02-23 11:02 ` Jonathan Cameron
2014-02-23 11:02 ` Jonathan Cameron
2014-02-23 22:01 ` Sebastian Reichel
2014-02-23 22:01 ` Sebastian Reichel
2014-02-23 22:07 ` [RFCv2 0/5] Convert twl4030-madc to IIO API Sebastian Reichel
2014-02-23 22:07 ` Sebastian Reichel
2014-02-23 22:07 ` [RFCv2 1/5] mfd: twl4030-madc: Use managed resources Sebastian Reichel
2014-02-23 22:07 ` [RFCv2 2/5] mfd: twl4030-madc: Add DT support and convert to IIO framework Sebastian Reichel
2014-02-23 22:07 ` [RFCv2 3/5] mfd: twl4030-madc: Cleanup driver Sebastian Reichel
2014-02-23 22:07 ` [RFCv2 4/5] Documentation: DT: Document twl4030-madc binding Sebastian Reichel
2014-02-23 22:07 ` [RFCv2 5/5] mfd: twl4030-madc: Move driver to drivers/iio/adc Sebastian Reichel
2014-02-23 22:07 ` Sebastian Reichel
2014-02-23 22:15 ` Joe Perches
2014-02-24 9:20 ` Peter Meerwald
2014-02-24 9:20 ` Peter Meerwald
2014-02-26 0:24 ` [RFCv3 0/7] Convert twl4030-madc to IIO API and add DT support Sebastian Reichel
2014-02-26 0:24 ` Sebastian Reichel
2014-02-26 0:24 ` [RFCv3 1/7] mfd: twl4030-madc: Use managed resources Sebastian Reichel
2014-02-26 0:24 ` [RFCv3 2/7] mfd: twl4030-madc: Add DT support and convert to IIO framework Sebastian Reichel
2014-02-26 9:26 ` Lee Jones
2014-02-26 9:26 ` Lee Jones
2014-02-26 0:24 ` [RFCv3 3/7] mfd: twl4030-madc: Cleanup driver Sebastian Reichel
2014-02-26 8:29 ` Lee Jones
2014-02-26 8:29 ` Lee Jones
2014-02-26 0:24 ` [RFCv3 4/7] mfd: twl-core: Add twl_i2c_read/write_u16 Sebastian Reichel
2014-02-26 0:24 ` Sebastian Reichel
2014-02-26 8:15 ` Lee Jones
2014-02-26 8:15 ` Lee Jones
2014-02-26 0:24 ` [RFCv3 5/7] mfd: twl4030-madc: Use twl_i2c_read/write_u16 for 16 bit registers Sebastian Reichel
2014-02-26 0:24 ` Sebastian Reichel
2014-02-26 8:02 ` Lee Jones
2014-02-26 0:24 ` [RFCv3 6/7] Documentation: DT: Document twl4030-madc binding Sebastian Reichel
2014-02-26 0:24 ` [RFCv3 7/7] mfd: twl4030-madc: Move driver to drivers/iio/adc Sebastian Reichel
2014-02-26 11:42 ` [RFCv3 0/7] Convert twl4030-madc to IIO API and add DT support Belisko Marek
2014-02-26 11:42 ` Belisko Marek
2014-02-26 20:03 ` [RFCv4 " Sebastian Reichel
2014-02-26 20:03 ` Sebastian Reichel
2014-02-26 20:03 ` [RFCv4 1/7] mfd: twl4030-madc: Use managed resources Sebastian Reichel
2014-02-26 20:03 ` [RFCv4 2/7] mfd: twl4030-madc: Add DT support and convert to IIO framework Sebastian Reichel
2014-02-27 8:23 ` Lee Jones
2014-02-27 8:23 ` Lee Jones
2014-03-01 11:33 ` Jonathan Cameron
2014-03-01 11:33 ` Jonathan Cameron
2014-02-26 20:03 ` [RFCv4 3/7] mfd: twl4030-madc: Cleanup driver Sebastian Reichel
2014-02-27 8:03 ` Lee Jones
2014-02-27 8:03 ` Lee Jones
2014-03-01 11:41 ` Jonathan Cameron
2014-03-01 11:41 ` Jonathan Cameron
2014-02-26 20:03 ` [RFCv4 4/7] mfd: twl-core: Add twl_i2c_read/write_u16 Sebastian Reichel
2014-03-01 11:48 ` Jonathan Cameron
2014-03-01 11:48 ` Jonathan Cameron
2014-02-26 20:03 ` [RFCv4 5/7] mfd: twl4030-madc: Use twl_i2c_read/write_u16 for 16 bit registers Sebastian Reichel
2014-03-01 11:49 ` Jonathan Cameron
2014-03-01 11:49 ` Jonathan Cameron
2014-02-26 20:03 ` [RFCv4 6/7] Documentation: DT: Document twl4030-madc binding Sebastian Reichel
2014-03-01 11:50 ` Jonathan Cameron
2014-03-01 11:50 ` Jonathan Cameron
2014-02-26 20:03 ` [RFCv4 7/7] mfd: twl4030-madc: Move driver to drivers/iio/adc Sebastian Reichel
2014-02-26 20:03 ` Sebastian Reichel
2014-03-01 11:51 ` Jonathan Cameron
2014-03-01 11:51 ` Jonathan Cameron
2014-03-01 11:52 ` [RFCv4 0/7] Convert twl4030-madc to IIO API and add DT support Jonathan Cameron
2014-03-01 11:52 ` Jonathan Cameron
2014-03-01 17:12 ` Sebastian Reichel
2014-03-01 17:12 ` Sebastian Reichel
2014-03-03 8:00 ` Lee Jones
2014-03-03 8:00 ` Lee Jones
2014-03-01 19:32 ` [PATCHv1 0/9] " Sebastian Reichel
2014-03-01 19:32 ` Sebastian Reichel
2014-03-01 19:32 ` [PATCHv1 1/9] mfd: twl4030-madc: Use managed resources Sebastian Reichel
2014-03-01 19:32 ` [PATCHv1 2/9] mfd: twl4030-madc: Add DT support and convert to IIO framework Sebastian Reichel
2014-03-01 19:32 ` [PATCHv1 3/9] mfd: twl4030-madc: Cleanup driver Sebastian Reichel
2014-03-01 19:32 ` [PATCHv1 4/9] mfd: twl-core: Add twl_i2c_read/write_u16 Sebastian Reichel
2014-03-01 19:32 ` [PATCHv1 5/9] mfd: twl4030-madc: Use twl_i2c_read/write_u16 for 16 bit registers Sebastian Reichel
2014-03-01 19:32 ` [PATCHv1 6/9] Documentation: DT: Document twl4030-madc binding Sebastian Reichel
2014-03-01 19:32 ` Sebastian Reichel
2014-03-01 19:32 ` [PATCHv1 7/9] mfd: twl4030-madc: Move driver to drivers/iio/adc Sebastian Reichel
2014-03-01 19:32 ` [PATCHv1 8/9] iio: documentation: Add ABI documentation for *_mean_raw Sebastian Reichel
2014-03-01 19:32 ` [PATCHv1 9/9] iio: inkern: add iio_read_channel_average_raw Sebastian Reichel
2014-03-04 22:05 ` [PATCHv2 0/9] Convert twl4030-madc to IIO API and add DT support Sebastian Reichel
2014-03-04 22:05 ` Sebastian Reichel
2014-03-04 22:05 ` [PATCHv2 1/9] mfd: twl4030-madc: Use managed resources Sebastian Reichel
2014-03-15 15:19 ` Jonathan Cameron
2014-03-15 15:19 ` Jonathan Cameron
2014-04-20 15:51 ` Pavel Machek
2014-04-20 15:51 ` Pavel Machek
2014-03-04 22:05 ` [PATCHv2 2/9] mfd: twl4030-madc: Add DT support and convert to IIO framework Sebastian Reichel
2014-03-05 1:40 ` Lee Jones
2014-03-05 1:40 ` Lee Jones
2014-03-15 15:23 ` Jonathan Cameron
2014-04-20 15:52 ` Pavel Machek
2014-03-04 22:05 ` [PATCHv2 3/9] mfd: twl4030-madc: Cleanup driver Sebastian Reichel
2014-03-15 15:25 ` Jonathan Cameron
2014-03-15 15:25 ` Jonathan Cameron
2014-04-20 15:54 ` Pavel Machek
2014-04-20 15:54 ` Pavel Machek
2014-03-04 22:05 ` [PATCHv2 4/9] mfd: twl-core: Add twl_i2c_read/write_u16 Sebastian Reichel
2014-03-04 22:05 ` Sebastian Reichel
2014-03-04 22:05 ` [PATCHv2 5/9] mfd: twl4030-madc: Use twl_i2c_read/write_u16 for 16 bit registers Sebastian Reichel
2014-03-04 22:05 ` [PATCHv2 6/9] Documentation: DT: Document twl4030-madc binding Sebastian Reichel
2014-03-15 15:27 ` Jonathan Cameron
2014-03-15 15:27 ` Jonathan Cameron
2014-03-04 22:05 ` [PATCHv2 7/9] mfd: twl4030-madc: Move driver to drivers/iio/adc Sebastian Reichel
2014-03-04 22:05 ` [PATCHv2 8/9] iio: documentation: Add ABI documentation for *_mean_raw Sebastian Reichel
2014-03-15 15:28 ` Jonathan Cameron
2014-03-15 15:28 ` Jonathan Cameron
2014-03-04 22:05 ` [PATCHv2 9/9] iio: inkern: add iio_read_channel_average_raw Sebastian Reichel
2014-03-15 15:30 ` Jonathan Cameron
2014-03-15 15:30 ` Jonathan Cameron
2014-03-05 21:00 ` [PATCHv2 0/9] Convert twl4030-madc to IIO API and add DT support Belisko Marek
2014-03-10 10:43 ` Lee Jones
2014-03-10 11:15 ` Sebastian Reichel
2014-03-10 11:15 ` Sebastian Reichel
2014-02-24 16:05 ` [RFCv1 4/4] mfd: twl4030-madc: Move driver to drivers/iio/adc Lee Jones
2014-02-24 16:05 ` Lee Jones
2014-02-24 16:04 ` [RFCv1 1/4] mfd: twl4030-madc: Use managed resources Lee Jones
2014-02-24 16:04 ` Lee Jones
2014-02-15 13:37 ` [PATCH 1/2] mfd: twl4030-madc: Add devicetree support Belisko Marek
2014-02-15 13:37 ` Belisko Marek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140214134815.GD13293@lee--X1 \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.