[PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[Maxime Ripard]

Hi,

This is the second version of the A10 watchdog compatible changes.
The only difference with the v1 being that we're now droping the old
compatibles, instead of keeping them, since the DT maintainers said it was
fine.

Thanks,
Maxime

Maxime Ripard (3):
  watchdog: sunxi: Change compatibles
  ARM: sunxi: Add the new watchog compatibles to the reboot code
  ARM: sunxi: dt: Update the watchdog compatibles

 Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt | 6 +++---
 arch/arm/boot/dts/sun4i-a10.dtsi                         | 2 +-
 arch/arm/boot/dts/sun5i-a10s.dtsi                        | 2 +-
 arch/arm/boot/dts/sun5i-a13.dtsi                         | 2 +-
 arch/arm/boot/dts/sun6i-a31.dtsi                         | 2 +-
 arch/arm/boot/dts/sun7i-a20.dtsi                         | 2 +-
 arch/arm/mach-sunxi/sunxi.c                              | 4 ++--
 drivers/watchdog/sunxi_wdt.c                             | 2 +-
 8 files changed, 11 insertions(+), 11 deletions(-)

-- 
1.8.4.2

[PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[Maxime Ripard]

Hi,

This is the second version of the A10 watchdog compatible changes.
The only difference with the v1 being that we're now droping the old
compatibles, instead of keeping them, since the DT maintainers said it was
fine.

Thanks,
Maxime

Maxime Ripard (3):
  watchdog: sunxi: Change compatibles
  ARM: sunxi: Add the new watchog compatibles to the reboot code
  ARM: sunxi: dt: Update the watchdog compatibles

 Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt | 6 +++---
 arch/arm/boot/dts/sun4i-a10.dtsi                         | 2 +-
 arch/arm/boot/dts/sun5i-a10s.dtsi                        | 2 +-
 arch/arm/boot/dts/sun5i-a13.dtsi                         | 2 +-
 arch/arm/boot/dts/sun6i-a31.dtsi                         | 2 +-
 arch/arm/boot/dts/sun7i-a20.dtsi                         | 2 +-
 arch/arm/mach-sunxi/sunxi.c                              | 4 ++--
 drivers/watchdog/sunxi_wdt.c                             | 2 +-
 8 files changed, 11 insertions(+), 11 deletions(-)

-- 
1.8.4.2

[PATCH v2 1/3] watchdog: sunxi: Change compatibles

[Maxime Ripard]

The Allwinner A10 and A31 compatibles were following a slightly different
compatible patterns than the rest of the SoCs for historical reasons. Change
the compatibles to match the other pattern in the watchdog controller driver
for consistency.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt | 6 +++---
 drivers/watchdog/sunxi_wdt.c                             | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
index e39cb26..b8f75c5 100644
--- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
@@ -2,13 +2,13 @@ Allwinner SoCs Watchdog timer
 
 Required properties:
 
-- compatible : should be "allwinner,<soc-family>-wdt", the currently supported
-  SoC families being sun4i and sun6i
+- compatible : should be either "allwinner,sun4i-a10-wdt" or
+               "allwinner,sun6i-a31-wdt"
 - reg : Specifies base physical address and size of the registers.
 
 Example:
 
 wdt: watchdog@01c20c90 {
-	compatible = "allwinner,sun4i-wdt";
+	compatible = "allwinner,sun4i-a10-wdt";
 	reg = <0x01c20c90 0x10>;
 };
diff --git a/drivers/watchdog/sunxi_wdt.c b/drivers/watchdog/sunxi_wdt.c
index 76332d8..cd00a78 100644
--- a/drivers/watchdog/sunxi_wdt.c
+++ b/drivers/watchdog/sunxi_wdt.c
@@ -205,7 +205,7 @@ static void sunxi_wdt_shutdown(struct platform_device *pdev)
 }
 
 static const struct of_device_id sunxi_wdt_dt_ids[] = {
-	{ .compatible = "allwinner,sun4i-wdt" },
+	{ .compatible = "allwinner,sun4i-a10-wdt" },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sunxi_wdt_dt_ids);
-- 
1.8.4.2

[PATCH v2 1/3] watchdog: sunxi: Change compatibles

[Maxime Ripard]

The Allwinner A10 and A31 compatibles were following a slightly different
compatible patterns than the rest of the SoCs for historical reasons. Change
the compatibles to match the other pattern in the watchdog controller driver
for consistency.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt | 6 +++---
 drivers/watchdog/sunxi_wdt.c                             | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
index e39cb26..b8f75c5 100644
--- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
@@ -2,13 +2,13 @@ Allwinner SoCs Watchdog timer
 
 Required properties:
 
-- compatible : should be "allwinner,<soc-family>-wdt", the currently supported
-  SoC families being sun4i and sun6i
+- compatible : should be either "allwinner,sun4i-a10-wdt" or
+               "allwinner,sun6i-a31-wdt"
 - reg : Specifies base physical address and size of the registers.
 
 Example:
 
 wdt: watchdog at 01c20c90 {
-	compatible = "allwinner,sun4i-wdt";
+	compatible = "allwinner,sun4i-a10-wdt";
 	reg = <0x01c20c90 0x10>;
 };
diff --git a/drivers/watchdog/sunxi_wdt.c b/drivers/watchdog/sunxi_wdt.c
index 76332d8..cd00a78 100644
--- a/drivers/watchdog/sunxi_wdt.c
+++ b/drivers/watchdog/sunxi_wdt.c
@@ -205,7 +205,7 @@ static void sunxi_wdt_shutdown(struct platform_device *pdev)
 }
 
 static const struct of_device_id sunxi_wdt_dt_ids[] = {
-	{ .compatible = "allwinner,sun4i-wdt" },
+	{ .compatible = "allwinner,sun4i-a10-wdt" },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sunxi_wdt_dt_ids);
-- 
1.8.4.2

[PATCH v2 2/3] ARM: sunxi: Add the new watchog compatibles to the reboot code

[Maxime Ripard]

Now that the watchdog driver has new compatibles, we need to support them in
the machine reboot code.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/mach-sunxi/sunxi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index aeea6ce..460b5a4 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -94,8 +94,8 @@ static void sun6i_restart(enum reboot_mode mode, const char *cmd)
 }
 
 static struct of_device_id sunxi_restart_ids[] = {
-	{ .compatible = "allwinner,sun4i-wdt" },
-	{ .compatible = "allwinner,sun6i-wdt" },
+	{ .compatible = "allwinner,sun4i-a10-wdt" },
+	{ .compatible = "allwinner,sun6i-a31-wdt" },
 	{ /*sentinel*/ }
 };
 
-- 
1.8.4.2

[PATCH v2 2/3] ARM: sunxi: Add the new watchog compatibles to the reboot code

[Maxime Ripard]

Now that the watchdog driver has new compatibles, we need to support them in
the machine reboot code.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/mach-sunxi/sunxi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index aeea6ce..460b5a4 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -94,8 +94,8 @@ static void sun6i_restart(enum reboot_mode mode, const char *cmd)
 }
 
 static struct of_device_id sunxi_restart_ids[] = {
-	{ .compatible = "allwinner,sun4i-wdt" },
-	{ .compatible = "allwinner,sun6i-wdt" },
+	{ .compatible = "allwinner,sun4i-a10-wdt" },
+	{ .compatible = "allwinner,sun6i-a31-wdt" },
 	{ /*sentinel*/ }
 };
 
-- 
1.8.4.2

[PATCH v2 3/3] ARM: sunxi: dt: Update the watchdog compatibles

[Maxime Ripard]

The watchdog compatibles were following a different pattern than the one found
in the other devices. Now that the driver supports the right pattern, switch to
it in the DT.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/boot/dts/sun4i-a10.dtsi  | 2 +-
 arch/arm/boot/dts/sun5i-a10s.dtsi | 2 +-
 arch/arm/boot/dts/sun5i-a13.dtsi  | 2 +-
 arch/arm/boot/dts/sun6i-a31.dtsi  | 2 +-
 arch/arm/boot/dts/sun7i-a20.dtsi  | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 26cf191..3e066b5 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -426,7 +426,7 @@
 		};
 
 		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-wdt";
+			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
 		};
 
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index b114be7..cff37c5 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -387,7 +387,7 @@
 		};
 
 		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-wdt";
+			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
 		};
 
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 5c121fc..0ecde81 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -351,7 +351,7 @@
 		};
 
 		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-wdt";
+			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
 		};
 
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index d3f1995..2d2ff8a 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -289,7 +289,7 @@
 		};
 
 		wdt1: watchdog@01c20ca0 {
-			compatible = "allwinner,sun6i-wdt";
+			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
 		};
 
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 4fbe530..30d1eb4 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -471,7 +471,7 @@
 		};
 
 		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-wdt";
+			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
 		};
 
-- 
1.8.4.2

[PATCH v2 3/3] ARM: sunxi: dt: Update the watchdog compatibles

[Maxime Ripard]

The watchdog compatibles were following a different pattern than the one found
in the other devices. Now that the driver supports the right pattern, switch to
it in the DT.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/boot/dts/sun4i-a10.dtsi  | 2 +-
 arch/arm/boot/dts/sun5i-a10s.dtsi | 2 +-
 arch/arm/boot/dts/sun5i-a13.dtsi  | 2 +-
 arch/arm/boot/dts/sun6i-a31.dtsi  | 2 +-
 arch/arm/boot/dts/sun7i-a20.dtsi  | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 26cf191..3e066b5 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -426,7 +426,7 @@
 		};
 
 		wdt: watchdog at 01c20c90 {
-			compatible = "allwinner,sun4i-wdt";
+			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
 		};
 
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index b114be7..cff37c5 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -387,7 +387,7 @@
 		};
 
 		wdt: watchdog at 01c20c90 {
-			compatible = "allwinner,sun4i-wdt";
+			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
 		};
 
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 5c121fc..0ecde81 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -351,7 +351,7 @@
 		};
 
 		wdt: watchdog at 01c20c90 {
-			compatible = "allwinner,sun4i-wdt";
+			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
 		};
 
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index d3f1995..2d2ff8a 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -289,7 +289,7 @@
 		};
 
 		wdt1: watchdog at 01c20ca0 {
-			compatible = "allwinner,sun6i-wdt";
+			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
 		};
 
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 4fbe530..30d1eb4 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -471,7 +471,7 @@
 		};
 
 		wdt: watchdog at 01c20c90 {
-			compatible = "allwinner,sun4i-wdt";
+			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
 		};
 
-- 
1.8.4.2

Re: [PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 650 bytes --]

Hi Wim,

On Fri, Feb 07, 2014 at 10:29:23PM +0100, Maxime Ripard wrote:
> Hi,
> 
> This is the second version of the A10 watchdog compatible changes.
> The only difference with the v1 being that we're now droping the old
> compatibles, instead of keeping them, since the DT maintainers said it was
> fine.
> 
> Thanks,
> Maxime
> 
> Maxime Ripard (3):
>   watchdog: sunxi: Change compatibles
>   ARM: sunxi: Add the new watchog compatibles to the reboot code
>   ARM: sunxi: dt: Update the watchdog compatibles

Ping?

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[Maxime Ripard]

Hi Wim,

On Fri, Feb 07, 2014 at 10:29:23PM +0100, Maxime Ripard wrote:
> Hi,
> 
> This is the second version of the A10 watchdog compatible changes.
> The only difference with the v1 being that we're now droping the old
> compatibles, instead of keeping them, since the DT maintainers said it was
> fine.
> 
> Thanks,
> Maxime
> 
> Maxime Ripard (3):
>   watchdog: sunxi: Change compatibles
>   ARM: sunxi: Add the new watchog compatibles to the reboot code
>   ARM: sunxi: dt: Update the watchdog compatibles

Ping?

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140303/61770bbc/attachment.sig>

Re: [PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[Wim Van Sebroeck]

Hi Maxime,

> Hi Wim,
> 
> On Fri, Feb 07, 2014 at 10:29:23PM +0100, Maxime Ripard wrote:
> > Hi,
> > 
> > This is the second version of the A10 watchdog compatible changes.
> > The only difference with the v1 being that we're now droping the old
> > compatibles, instead of keeping them, since the DT maintainers said it was
> > fine.
> > 
> > Thanks,
> > Maxime
> > 
> > Maxime Ripard (3):
> >   watchdog: sunxi: Change compatibles
> >   ARM: sunxi: Add the new watchog compatibles to the reboot code
> >   ARM: sunxi: dt: Update the watchdog compatibles
> 
> Ping?

On my agenda for Monday.

Kind regards,
Wim.

Re: [PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[Wim Van Sebroeck]

Hi Maxime,

> Hi Wim,
> 
> On Fri, Feb 07, 2014 at 10:29:23PM +0100, Maxime Ripard wrote:
> > Hi,
> > 
> > This is the second version of the A10 watchdog compatible changes.
> > The only difference with the v1 being that we're now droping the old
> > compatibles, instead of keeping them, since the DT maintainers said it was
> > fine.
> > 
> > Thanks,
> > Maxime
> > 
> > Maxime Ripard (3):
> >   watchdog: sunxi: Change compatibles
> >   ARM: sunxi: Add the new watchog compatibles to the reboot code
> >   ARM: sunxi: dt: Update the watchdog compatibles
> 
> Ping?

I'm OK with the patches, but what is the preferred way to get them upstream?
via watchdog tree or via arch/soc tree?

Kind regards,
Wim.

Re: [PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1020 bytes --]

Hi Wim,

On Tue, Mar 11, 2014 at 09:54:05PM +0100, Wim Van Sebroeck wrote:
> > On Fri, Feb 07, 2014 at 10:29:23PM +0100, Maxime Ripard wrote:
> > > Hi,
> > > 
> > > This is the second version of the A10 watchdog compatible changes.
> > > The only difference with the v1 being that we're now droping the old
> > > compatibles, instead of keeping them, since the DT maintainers said it was
> > > fine.
> > > 
> > > Thanks,
> > > Maxime
> > > 
> > > Maxime Ripard (3):
> > >   watchdog: sunxi: Change compatibles
> > >   ARM: sunxi: Add the new watchog compatibles to the reboot code
> > >   ARM: sunxi: dt: Update the watchdog compatibles
> > 
> > Ping?
> 
> I'm OK with the patches, but what is the preferred way to get them upstream?
> via watchdog tree or via arch/soc tree?

Since it touches the machine restart code, I'd prefer to merge it
myself if it's ok?

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[Maxime Ripard]

Hi Wim,

On Tue, Mar 11, 2014 at 09:54:05PM +0100, Wim Van Sebroeck wrote:
> > On Fri, Feb 07, 2014 at 10:29:23PM +0100, Maxime Ripard wrote:
> > > Hi,
> > > 
> > > This is the second version of the A10 watchdog compatible changes.
> > > The only difference with the v1 being that we're now droping the old
> > > compatibles, instead of keeping them, since the DT maintainers said it was
> > > fine.
> > > 
> > > Thanks,
> > > Maxime
> > > 
> > > Maxime Ripard (3):
> > >   watchdog: sunxi: Change compatibles
> > >   ARM: sunxi: Add the new watchog compatibles to the reboot code
> > >   ARM: sunxi: dt: Update the watchdog compatibles
> > 
> > Ping?
> 
> I'm OK with the patches, but what is the preferred way to get them upstream?
> via watchdog tree or via arch/soc tree?

Since it touches the machine restart code, I'd prefer to merge it
myself if it's ok?

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140312/775f5112/attachment.sig>

Re: [PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[Wim Van Sebroeck]

Hi Maxime,

> Hi Wim,
> 
> On Tue, Mar 11, 2014 at 09:54:05PM +0100, Wim Van Sebroeck wrote:
> > > On Fri, Feb 07, 2014 at 10:29:23PM +0100, Maxime Ripard wrote:
> > > > Hi,
> > > > 
> > > > This is the second version of the A10 watchdog compatible changes.
> > > > The only difference with the v1 being that we're now droping the old
> > > > compatibles, instead of keeping them, since the DT maintainers said it was
> > > > fine.
> > > > 
> > > > Thanks,
> > > > Maxime
> > > > 
> > > > Maxime Ripard (3):
> > > >   watchdog: sunxi: Change compatibles
> > > >   ARM: sunxi: Add the new watchog compatibles to the reboot code
> > > >   ARM: sunxi: dt: Update the watchdog compatibles
> > > 
> > > Ping?
> > 
> > I'm OK with the patches, but what is the preferred way to get them upstream?
> > via watchdog tree or via arch/soc tree?
> 
> Since it touches the machine restart code, I'd prefer to merge it
> myself if it's ok?

No Problem. You have my Acked-by.

Kind regards,
Wim.

Re: [PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 593 bytes --]


On Wed, Mar 12, 2014 at 07:07:51PM +0100, Wim Van Sebroeck wrote:
> > > I'm OK with the patches, but what is the preferred way to get them upstream?
> > > via watchdog tree or via arch/soc tree?
> > 
> > Since it touches the machine restart code, I'd prefer to merge it
> > myself if it's ok?
> 
> No Problem. You have my Acked-by.

Actually, I only have to keep together patches 2 and 3. Could you
merge the first one? I'll handle the two others.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[Maxime Ripard]

On Wed, Mar 12, 2014 at 07:07:51PM +0100, Wim Van Sebroeck wrote:
> > > I'm OK with the patches, but what is the preferred way to get them upstream?
> > > via watchdog tree or via arch/soc tree?
> > 
> > Since it touches the machine restart code, I'd prefer to merge it
> > myself if it's ok?
> 
> No Problem. You have my Acked-by.

Actually, I only have to keep together patches 2 and 3. Could you
merge the first one? I'll handle the two others.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140313/ca831906/attachment.sig>

Re: [PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[Wim Van Sebroeck]

Hi Maxime,

> 
> On Wed, Mar 12, 2014 at 07:07:51PM +0100, Wim Van Sebroeck wrote:
> > > > I'm OK with the patches, but what is the preferred way to get them upstream?
> > > > via watchdog tree or via arch/soc tree?
> > > 
> > > Since it touches the machine restart code, I'd prefer to merge it
> > > myself if it's ok?
> > 
> > No Problem. You have my Acked-by.
> 
> Actually, I only have to keep together patches 2 and 3. Could you
> merge the first one? I'll handle the two others.

First one added to linux-watchdog-next.

Kind regards,
Wim.

Re: [PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 765 bytes --]

On Sat, Mar 15, 2014 at 09:37:11AM +0100, Wim Van Sebroeck wrote:
> Hi Maxime,
> 
> > 
> > On Wed, Mar 12, 2014 at 07:07:51PM +0100, Wim Van Sebroeck wrote:
> > > > > I'm OK with the patches, but what is the preferred way to get them upstream?
> > > > > via watchdog tree or via arch/soc tree?
> > > > 
> > > > Since it touches the machine restart code, I'd prefer to merge it
> > > > myself if it's ok?
> > > 
> > > No Problem. You have my Acked-by.
> > 
> > Actually, I only have to keep together patches 2 and 3. Could you
> > merge the first one? I'll handle the two others.
> 
> First one added to linux-watchdog-next.

Thanks!

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH v2 0/3] watchdog: sunxi: Change compatible patterns

[Maxime Ripard]

On Sat, Mar 15, 2014 at 09:37:11AM +0100, Wim Van Sebroeck wrote:
> Hi Maxime,
> 
> > 
> > On Wed, Mar 12, 2014 at 07:07:51PM +0100, Wim Van Sebroeck wrote:
> > > > > I'm OK with the patches, but what is the preferred way to get them upstream?
> > > > > via watchdog tree or via arch/soc tree?
> > > > 
> > > > Since it touches the machine restart code, I'd prefer to merge it
> > > > myself if it's ok?
> > > 
> > > No Problem. You have my Acked-by.
> > 
> > Actually, I only have to keep together patches 2 and 3. Could you
> > merge the first one? I'll handle the two others.
> 
> First one added to linux-watchdog-next.

Thanks!

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140317/76ed589e/attachment.sig>