From: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
To: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: Re: [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
Date: Tue, 4 Mar 2014 14:23:57 -0800 [thread overview]
Message-ID: <20140304222357.GA6125@roeck-us.net> (raw)
In-Reply-To: <53164E78.5010708-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
On Tue, Mar 04, 2014 at 03:06:48PM -0700, Stephen Warren wrote:
> On 03/04/2014 04:31 AM, Wei Ni wrote:
> > Add dt node to describe the thermal zone for the nct1008.
> >
> > Change-Id: I0256836e52d73ec282574e4fd91df52958936e35
>
> ???????
>
I think this is for one of those open-source sites out there
which count open source contributions. Not Ohloh, but similar.
You have to specify that Change-Id to have it associate your
name with the patch.
Guenter
> > diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
>
> > + thermal-zones {
> > + nct1008-local {
> > + polling-delay-passive = <2000>; /* milliseconds */
>
> Nothing can possible make use of this node, since there's no compatible
> value or anything else like that to bind a driver to it.
>
WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <linux@roeck-us.net>
To: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: Re: [lm-sensors] [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
Date: Tue, 04 Mar 2014 22:23:57 +0000 [thread overview]
Message-ID: <20140304222357.GA6125@roeck-us.net> (raw)
In-Reply-To: <53164E78.5010708-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
On Tue, Mar 04, 2014 at 03:06:48PM -0700, Stephen Warren wrote:
> On 03/04/2014 04:31 AM, Wei Ni wrote:
> > Add dt node to describe the thermal zone for the nct1008.
> >
> > Change-Id: I0256836e52d73ec282574e4fd91df52958936e35
>
> ???????
>
I think this is for one of those open-source sites out there
which count open source contributions. Not Ohloh, but similar.
You have to specify that Change-Id to have it associate your
name with the patch.
Guenter
> > diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
>
> > + thermal-zones {
> > + nct1008-local {
> > + polling-delay-passive = <2000>; /* milliseconds */
>
> Nothing can possible make use of this node, since there's no compatible
> value or anything else like that to bind a driver to it.
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <linux@roeck-us.net>
To: Stephen Warren <swarren@wwwdotorg.org>
Cc: Wei Ni <wni@nvidia.com>,
khali@linux-fr.org, linux-kernel@vger.kernel.org,
linux-tegra@vger.kernel.org, lm-sensors@lm-sensors.org
Subject: Re: [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
Date: Tue, 4 Mar 2014 14:23:57 -0800 [thread overview]
Message-ID: <20140304222357.GA6125@roeck-us.net> (raw)
In-Reply-To: <53164E78.5010708@wwwdotorg.org>
On Tue, Mar 04, 2014 at 03:06:48PM -0700, Stephen Warren wrote:
> On 03/04/2014 04:31 AM, Wei Ni wrote:
> > Add dt node to describe the thermal zone for the nct1008.
> >
> > Change-Id: I0256836e52d73ec282574e4fd91df52958936e35
>
> ???????
>
I think this is for one of those open-source sites out there
which count open source contributions. Not Ohloh, but similar.
You have to specify that Change-Id to have it associate your
name with the patch.
Guenter
> > diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
>
> > + thermal-zones {
> > + nct1008-local {
> > + polling-delay-passive = <2000>; /* milliseconds */
>
> Nothing can possible make use of this node, since there's no compatible
> value or anything else like that to bind a driver to it.
>
next prev parent reply other threads:[~2014-03-04 22:23 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-04 11:31 [PATCH v2 0/3] expose lm90 to thermal fw Wei Ni
2014-03-04 11:31 ` Wei Ni
2014-03-04 11:31 ` [lm-sensors] " Wei Ni
[not found] ` <1393932664-13319-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-03-04 11:31 ` [PATCH v2 1/3] hwmon: (lm90) split set&show temp as common codes Wei Ni
2014-03-04 11:31 ` Wei Ni
2014-03-04 11:31 ` [lm-sensors] " Wei Ni
2014-03-04 11:31 ` [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008 Wei Ni
2014-03-04 11:31 ` Wei Ni
2014-03-04 11:31 ` [lm-sensors] " Wei Ni
2014-03-04 22:06 ` Stephen Warren
2014-03-04 22:06 ` [lm-sensors] " Stephen Warren
[not found] ` <53164E78.5010708-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2014-03-04 22:23 ` Guenter Roeck [this message]
2014-03-04 22:23 ` Guenter Roeck
2014-03-04 22:23 ` [lm-sensors] " Guenter Roeck
[not found] ` <20140304222357.GA6125-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2014-03-05 2:30 ` Wei Ni
2014-03-05 2:30 ` Wei Ni
2014-03-05 2:30 ` [lm-sensors] " Wei Ni
[not found] ` <53168C5B.6070003-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-03-05 2:58 ` Stephen Warren
2014-03-05 2:58 ` Stephen Warren
2014-03-05 2:58 ` [lm-sensors] " Stephen Warren
[not found] ` <531692D2.6040204-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2014-03-05 3:07 ` Wei Ni
2014-03-05 3:07 ` Wei Ni
2014-03-05 3:07 ` [lm-sensors] " Wei Ni
[not found] ` <531694EB.50906-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-03-05 3:14 ` Stephen Warren
2014-03-05 3:14 ` Stephen Warren
2014-03-05 3:14 ` [lm-sensors] " Stephen Warren
[not found] ` <531696A9.6060906-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2014-03-05 4:26 ` Wei Ni
2014-03-05 4:26 ` Wei Ni
2014-03-05 4:26 ` [lm-sensors] " Wei Ni
[not found] ` <5316A785.8030504-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-03-05 4:30 ` Wei Ni
2014-03-05 4:30 ` Wei Ni
2014-03-05 4:30 ` [lm-sensors] " Wei Ni
[not found] ` <1393932664-13319-4-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-03-06 17:59 ` Stephen Warren
2014-03-06 17:59 ` Stephen Warren
2014-03-06 17:59 ` [lm-sensors] " Stephen Warren
[not found] ` <5318B790.8090808-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2014-03-07 3:45 ` Wei Ni
2014-03-07 3:45 ` Wei Ni
2014-03-07 3:45 ` [lm-sensors] " Wei Ni
[not found] ` <531940C5.3040102-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-03-07 4:23 ` Stephen Warren
2014-03-07 4:23 ` Stephen Warren
2014-03-07 4:23 ` [lm-sensors] " Stephen Warren
2014-03-04 11:31 ` [PATCH v2 2/3] hwmon: lm90: expose to thermal fw via DT nodes Wei Ni
2014-03-04 11:31 ` Wei Ni
2014-03-04 11:31 ` [lm-sensors] " Wei Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140304222357.GA6125@roeck-us.net \
--to=linux-0h96xk9xttrk1umjsbkqmq@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.