From: Julian Wollrath <jwollrath@web.de>
To: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [RESEND] Fast TSC calibration fails with v3.14-rc1 and later
Date: Mon, 10 Mar 2014 11:04:10 +0100 [thread overview]
Message-ID: <20140310110410.5b2218f6@ilfaris> (raw)
Hi,
on a Thinkpad x121e (AMD E-450 APU) with version 3.13.5 and earlier of
the kernel I get:
[...]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 1646.619 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3293.23 BogoMIPS (lpj=1646619)
[...]
but starting with v3.14-rc1 the fast TSC calibration fails:
[...]
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 1646.490 MHz processor
[...]
If you need more information, please do not hesitate to ask.
With best regards,
Julian Wollrath
Full dmesg output:
[ 0.000000] Linux version 3.14.0-rc5 (wolle@ilfaris) (gcc version
4.8.2 (Debian 4.8.2-16) ) #1 SMP Mon Mar 3 16:13:57 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.14.0-rc5
root=/dev/mapper/encrypted-root ro quiet [ 0.000000] e820:
BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem
0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820:
[mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000]
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c6ceafff]
usable [ 0.000000] BIOS-e820: [mem
0x00000000c6ceb000-0x00000000c70fafff] reserved [ 0.000000]
BIOS-e820: [mem 0x00000000c70fb000-0x00000000c717afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c717b000-0x00000000c71dafff]
ACPI data [ 0.000000] BIOS-e820: [mem
0x00000000c71db000-0x00000000c7bfffff] usable [ 0.000000] BIOS-e820:
[mem 0x00000000c7c00000-0x00000000c7ffffff] reserved [ 0.000000]
BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff]
reserved [ 0.000000] BIOS-e820: [mem
0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000]
BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] NX (Execute Disable) protection: active [ 0.000000]
SMBIOS 2.6 present. [ 0.000000] DMI: LENOVO 30515YG/30515YG, BIOS
8RET52WW (1.15 ) 11/15/2011 [ 0.000000] e820: update [mem
0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove
[mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed
ranges enabled: [ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF
write-protect [ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0FFF90000 mask FFFFF0000 uncachable
[ 0.000000] 4 base 0FED80000 mask FFFFFF000 uncachable
[ 0.000000] 5 disabled [ 0.000000] 6 disabled
[ 0.000000] 7 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] TOM2: 000000011f000000 aka 4592M [ 0.000000] x86 PAT
enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000]
e820: last_pfn = 0xc7c00 max_arch_pfn = 0x400000000 [ 0.000000] Base
memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000]
Using GB pages for direct mapping [ 0.000000] init_memory_mapping:
[mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff]
page 4k [ 0.000000] BRK [0x01a2d000, 0x01a2dfff] PGTABLE
[ 0.000000] BRK [0x01a2e000, 0x01a2efff] PGTABLE
[ 0.000000] BRK [0x01a2f000, 0x01a2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11ee00000-0x11effffff]
[ 0.000000] [mem 0x11ee00000-0x11effffff] page 2M
[ 0.000000] BRK [0x01a30000, 0x01a30fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11edfffff]
[ 0.000000] [mem 0x11c000000-0x11edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc6ceafff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc6bfffff] page 2M
[ 0.000000] [mem 0xc6c00000-0xc6ceafff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc71db000-0xc7bfffff]
[ 0.000000] [mem 0xc71db000-0xc71fffff] page 4k
[ 0.000000] [mem 0xc7200000-0xc7bfffff] page 2M
[ 0.000000] BRK [0x01a31000, 0x01a31fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x376c2000-0x37b58fff]
[ 0.000000] ACPI: RSDP 00000000000f00e0 000024 (v04 LENOVO)
[ 0.000000] ACPI: XSDT 00000000c71da120 000074 (v01 LENOVO TP-8R
00000003 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000c71c5000
0000F4 (v04 LENOVO TP-8R 00001150 PTL 00000002) [ 0.000000]
ACPI: DSDT 00000000c71c7000 0112E1 (v01 LENOVO TP-8R 00001000 PTEC
00001150) [ 0.000000] ACPI: FACS 00000000c7166000 000040
[ 0.000000] ACPI: SLIC 00000000c71d9000 000176 (v01 LENOVO TP-8R
00001150 PTEC 00000001) [ 0.000000] ACPI: HPET 00000000c71c4000
000038 (v01 LENOVO TP-8R 00001150 PTL 00000002) [ 0.000000]
ACPI: APIC 00000000c71c3000 00005E (v02 LENOVO TP-8R 00001150 PTL
00000002) [ 0.000000] ACPI: MCFG 00000000c71c2000 00003C (v01 LENOVO
TP-8R 00001150 PTL 00000002) [ 0.000000] ACPI: UEFI
00000000c71c1000 00003E (v01 LENOVO TP-8R 00001150 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c71c0000 000042 (v01 PTL COMBUF
00000001 PTL 00000001) [ 0.000000] ACPI: SSDT 00000000c71bf000
0003DE (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000]
ACPI: SSDT 00000000c71bd000 00168E (v02 AMD ALIB 00000001 MSFT
04000000) [ 0.000000] ACPI: UEFI 00000000c71bc000 00013E (v01 LENOVO
TP-8R 00001150 PTL 00000002) [ 0.000000] ACPI: Local APIC
address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0003ffffff]
PMD -> [ffff88011ac00000-ffff88011dffffff] on node 0 [ 0.000000]
Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000]
Normal [mem 0x100000000-0x11effffff] [ 0.000000] Movable zone
start for each node [ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000]
node 0: [mem 0x00100000-0xc6ceafff] [ 0.000000] node 0: [mem
0xc71db000-0xc7bfffff] [ 0.000000] node 0: [mem
0x100000000-0x11effffff] [ 0.000000] On node 0 totalpages: 943788
[ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000]
DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO
batch:0 [ 0.000000] DMA32 zone: 11113 pages used for memmap
[ 0.000000] DMA32 zone: 812816 pages, LIFO batch:31
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local
APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00]
lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01]
lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00]
high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high
edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02]
address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2,
version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI:
INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI:
IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc6ceb000-0xc70fafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc70fb000-0xc717afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc717b000-0xc71dafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7c00000-0xc7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xc8000000-0xfebfffff] available for PCI
devices [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2
nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu
@ffff88011ec00000 s80064 r8192 d22336 u1048576 [ 0.000000]
pcpu-alloc: s80064 r8192 d22336 u1048576 alloc=1*2097152 [ 0.000000]
pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order,
mobility grouping on. Total pages: 930862 [ 0.000000] Kernel
command line: BOOT_IMAGE=/vmlinuz-3.14.0-rc5
root=/dev/mapper/encrypted-root ro quiet [ 0.000000] PID hash table
entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash
table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000]
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3634188K/3775152K available (4378K kernel code,
586K rwdata, 1428K rodata, 836K init, 776K bss, 140964K reserved)
[ 0.000000] Hierarchical RCU implementation. [ 0.000000]
RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000]
NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] ACPI: Core revision 20131218
[ 0.000000] ACPI: All ACPI Tables successfully acquired
[ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console:
colour VGA+ 80x25 [ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 1646.490 MHz processor
[ 0.000044] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3292.98 BogoMIPS (lpj=1646490) [ 0.000049]
pid_max: default: 32768 minimum: 301 [ 0.000113] Mount-cache hash
table entries: 256 [ 0.000420] tseg: 00c7c00000
[ 0.000424] CPU: Physical Processor ID: 0
[ 0.000426] CPU: Processor Core ID: 0
[ 0.000429] mce: CPU supports 6 MCE banks
[ 0.000444] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.000444] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.000444] tlb_flushall_shift: 6
[ 0.000610] Freeing SMP alternatives memory: 16K (ffffffff81965000 -
ffffffff81969000) [ 0.001115] ..TIMER: vector=0x30 apic1=0 pin1=2
apic2=-1 pin2=-1 [ 0.011123] smpboot: CPU0: AMD E-450 APU with
Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[ 0.112402] Performance Events: AMD PMU driver. [ 0.112410] ...
version: 0 [ 0.112412] ... bit width: 48
[ 0.112414] ... generic registers: 4
[ 0.112416] ... value mask: 0000ffffffffffff
[ 0.112419] ... max period: 00007fffffffffff
[ 0.112421] ... fixed-purpose events: 0
[ 0.112423] ... event mask: 000000000000000f
[ 0.112936] x86: Booting SMP configuration:
[ 0.112942] .... node #0, CPUs: #1
[ 0.126168] x86: Booted up 1 node, 2 CPUs
[ 0.126172] smpboot: Total of 2 processors activated (6585.96
BogoMIPS) [ 0.126852] devtmpfs: initialized
[ 0.127236] PM: Registering ACPI NVS region [mem
0xc70fb000-0xc717afff] (524288 bytes) [ 0.127623] NET: Registered
protocol family 16 [ 0.127764] cpuidle: using governor ladder
[ 0.127768] cpuidle: using governor menu
[ 0.127943] ACPI: bus type PCI registered
[ 0.128062] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem
0xf8000000-0xf9ffffff] (base 0xf8000000) [ 0.128067] PCI: not using
MMCONFIG [ 0.128070] PCI: Using configuration type 1 for base access
[ 0.128072] PCI: Using configuration type 1 for extended access
[ 0.129325] bio: create slab <bio-0> at 0
[ 0.129525] ACPI: Added _OSI(Module Device)
[ 0.129529] ACPI: Added _OSI(Processor Device)
[ 0.129532] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.129534] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.143453] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.150390] ACPI: Interpreter enabled
[ 0.150408] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S1_] (20131218/hwxface-580) [ 0.150417] ACPI Exception:
AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
(20131218/hwxface-580) [ 0.150441] ACPI: (supports S0 S3 S4 S5)
[ 0.150445] ACPI: Using IOAPIC for interrupt routing [ 0.150712]
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem
0xf8000000-0xf9ffffff] (base 0xf8000000) [ 0.151180] PCI: MMCONFIG
at [mem 0xf8000000-0xf9ffffff] reserved in ACPI motherboard resources
[ 0.153412] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug [ 0.154324] [Firmware Bug]: ACPI:
No _BQC method, cannot determine initial brightness [ 0.154349]
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial
brightness [ 0.165487] [Firmware Bug]: ACPI: No _BQC method, cannot
determine initial brightness [ 0.165529] [Firmware Bug]: ACPI: No
_BQC method, cannot determine initial brightness [ 0.169424] ACPI:
PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.169440] acpi
PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments
MSI] [ 0.170026] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug
PME AER PCIeCapability] [ 0.171823] acpi PNP0A08:00: ignoring host
bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM
[mem 0x000c0000-0x000ce5ff]) [ 0.171834] acpi PNP0A08:00: [Firmware
Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this
bridge [ 0.171891] PCI host bridge to bus 0000:00 [ 0.171897]
pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.171902] pci_bus
0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.171906]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff]
[ 0.171910] pci_bus 0000:00: root bus resource [mem
0x000c2000-0x000c3fff] [ 0.171914] pci_bus 0000:00: root bus
resource [mem 0x000c4000-0x000c5fff] [ 0.171917] pci_bus 0000:00:
root bus resource [mem 0x000c6000-0x000c7fff] [ 0.171921] pci_bus
0000:00: root bus resource [mem 0x000c8000-0x000c9fff] [ 0.171925]
pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff]
[ 0.171929] pci_bus 0000:00: root bus resource [mem
0x000cc000-0x000cdfff] [ 0.171932] pci_bus 0000:00: root bus
resource [mem 0x000d0000-0x000d1fff] [ 0.171937] pci_bus 0000:00:
root bus resource [mem 0x000d2000-0x000d3fff] [ 0.171940] pci_bus
0000:00: root bus resource [mem 0x000d4000-0x000d5fff] [ 0.171944]
pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
[ 0.171947] pci_bus 0000:00: root bus resource [mem
0x000d8000-0x000d9fff] [ 0.171951] pci_bus 0000:00: root bus
resource [mem 0x000da000-0x000dbfff] [ 0.171955] pci_bus 0000:00:
root bus resource [mem 0x000dc000-0x000ddfff] [ 0.171958] pci_bus
0000:00: root bus resource [mem 0x000de000-0x000dffff] [ 0.171962]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
[ 0.171965] pci_bus 0000:00: root bus resource [mem
0x000e2000-0x000e3fff] [ 0.171969] pci_bus 0000:00: root bus
resource [mem 0x000e4000-0x000e5fff] [ 0.171972] pci_bus 0000:00:
root bus resource [mem 0x000e6000-0x000e7fff] [ 0.171976] pci_bus
0000:00: root bus resource [mem 0x000e8000-0x000e9fff] [ 0.171980]
pci_bus 0000:00: root bus resource [mem 0x000ea000-0x000ebfff]
[ 0.171983] pci_bus 0000:00: root bus resource [mem
0x000ec000-0x000edfff] [ 0.171987] pci_bus 0000:00: root bus
resource [mem 0x000ee000-0x000effff] [ 0.171990] pci_bus 0000:00:
root bus resource [mem 0xe0000000-0xf7ffffff] [ 0.171994] pci_bus
0000:00: root bus resource [mem 0xf8000000-0xffffffff] [ 0.171998]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.172001]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.172017]
pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 [ 0.172182] pci
0000:00:01.0: [1002:9806] type 00 class 0x030000 [ 0.172198] pci
0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] [ 0.172209]
pci 0000:00:01.0: reg 0x14: [io 0x3000-0x30ff] [ 0.172220] pci
0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff] [ 0.172286] pci
0000:00:01.0: supports D1 D2 [ 0.172409] pci 0000:00:01.1:
[1002:1314] type 00 class 0x040300 [ 0.172423] pci 0000:00:01.1: reg
0x10: [mem 0xf0344000-0xf0347fff] [ 0.172498] pci 0000:00:01.1:
supports D1 D2 [ 0.172668] pci 0000:00:04.0: [1022:1512] type 01
class 0x060400 [ 0.172749] pci 0000:00:04.0: PME# supported from D0
D3hot D3cold [ 0.172826] pci 0000:00:04.0: System wakeup disabled by
ACPI [ 0.172902] pci 0000:00:06.0: [1022:1514] type 01 class
0x060400 [ 0.172981] pci 0000:00:06.0: PME# supported from D0 D3hot
D3cold [ 0.173056] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.173133] pci 0000:00:07.0: [1022:1515] type 01 class 0x060400
[ 0.173217] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.173291] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.173426] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.173454] pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f]
[ 0.173468] pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127]
[ 0.173482] pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117]
[ 0.173497] pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123]
[ 0.173511] pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f]
[ 0.173526] pci 0000:00:11.0: reg 0x24: [mem 0xf034a000-0xf034a3ff]
[ 0.173748] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.173768] pci 0000:00:12.0: reg 0x10: [mem 0xf0349000-0xf0349fff]
[ 0.173926] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.174002] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.174029] pci 0000:00:12.2: reg 0x10: [mem 0xf034a500-0xf034a5ff]
[ 0.174140] pci 0000:00:12.2: supports D1 D2 [ 0.174143] pci
0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.174238] pci
0000:00:12.2: System wakeup disabled by ACPI [ 0.174361] pci
0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.174381] pci
0000:00:13.0: reg 0x10: [mem 0xf0348000-0xf0348fff] [ 0.174534] pci
0000:00:13.0: System wakeup disabled by ACPI [ 0.174658] pci
0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.174685] pci
0000:00:13.2: reg 0x10: [mem 0xf034a400-0xf034a4ff] [ 0.174795] pci
0000:00:13.2: supports D1 D2 [ 0.174799] pci 0000:00:13.2: PME#
supported from D0 D1 D2 D3hot [ 0.174968] pci 0000:00:14.0:
[1002:4385] type 00 class 0x0c0500 [ 0.175164] pci 0000:00:14.2:
[1002:4383] type 00 class 0x040300 [ 0.175196] pci 0000:00:14.2: reg
0x10: [mem 0xf0340000-0xf0343fff 64bit] [ 0.175285] pci
0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.175355] pci
0000:00:14.2: System wakeup disabled by ACPI [ 0.175470] pci
0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.175714] pci
0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.175821] pci
0000:00:14.4: System wakeup disabled by ACPI [ 0.175895] pci
0000:00:18.0: [1022:1700] type 00 class 0x060000 [ 0.176039] pci
0000:00:18.1: [1022:1701] type 00 class 0x060000 [ 0.176177] pci
0000:00:18.2: [1022:1702] type 00 class 0x060000 [ 0.176313] pci
0000:00:18.3: [1022:1703] type 00 class 0x060000 [ 0.176464] pci
0000:00:18.4: [1022:1704] type 00 class 0x060000 [ 0.176599] pci
0000:00:18.5: [1022:1718] type 00 class 0x060000 [ 0.176734] pci
0000:00:18.6: [1022:1716] type 00 class 0x060000 [ 0.176866] pci
0000:00:18.7: [1022:1719] type 00 class 0x060000 [ 0.177169] pci
0000:01:00.0: [8086:4239] type 00 class 0x028000 [ 0.177262] pci
0000:01:00.0: reg 0x10: [mem 0xf0200000-0xf0201fff 64bit]
[ 0.177507] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.180291] pci 0000:00:04.0: PCI bridge to [bus 01] [ 0.180310]
pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.180416] pci 0000:02:00.0: [1969:1083] type 00 class 0x020000
[ 0.180443] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff
64bit] [ 0.180459] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.180574] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
D3cold [ 0.183220] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.183246] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.183259] pci 0000:00:06.0: bridge window [mem
0xf0100000-0xf01fffff] [ 0.183430] pci 0000:03:00.0: [10ec:5209]
type 00 class 0xff0000 [ 0.183456] pci 0000:03:00.0: reg 0x10: [mem
0xf0000000-0xf0000fff] [ 0.183528] pci 0000:03:00.0: reg 0x30: [mem
0xffff0000-0xffffffff pref] [ 0.183605] pci 0000:03:00.0: supports
D1 D2 [ 0.183609] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.186193] pci 0000:00:07.0: PCI bridge to [bus 03] [ 0.186210]
pci 0000:00:07.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.186442] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive
decode) [ 0.186456] pci 0000:00:14.4: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode) [ 0.186460] pci
0000:00:14.4: bridge window [mem 0x000c0000-0x000c1fff] (subtractive
decode) [ 0.186465] pci 0000:00:14.4: bridge window [mem
0x000c2000-0x000c3fff] (subtractive decode) [ 0.186468] pci
0000:00:14.4: bridge window [mem 0x000c4000-0x000c5fff] (subtractive
decode) [ 0.186472] pci 0000:00:14.4: bridge window [mem
0x000c6000-0x000c7fff] (subtractive decode) [ 0.186476] pci
0000:00:14.4: bridge window [mem 0x000c8000-0x000c9fff] (subtractive
decode) [ 0.186480] pci 0000:00:14.4: bridge window [mem
0x000ca000-0x000cbfff] (subtractive decode) [ 0.186483] pci
0000:00:14.4: bridge window [mem 0x000cc000-0x000cdfff] (subtractive
decode) [ 0.186487] pci 0000:00:14.4: bridge window [mem
0x000d0000-0x000d1fff] (subtractive decode) [ 0.186491] pci
0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive
decode) [ 0.186494] pci 0000:00:14.4: bridge window [mem
0x000d4000-0x000d5fff] (subtractive decode) [ 0.186498] pci
0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive
decode) [ 0.186502] pci 0000:00:14.4: bridge window [mem
0x000d8000-0x000d9fff] (subtractive decode) [ 0.186506] pci
0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive
decode) [ 0.186509] pci 0000:00:14.4: bridge window [mem
0x000dc000-0x000ddfff] (subtractive decode) [ 0.186513] pci
0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive
decode) [ 0.186517] pci 0000:00:14.4: bridge window [mem
0x000e0000-0x000e1fff] (subtractive decode) [ 0.186520] pci
0000:00:14.4: bridge window [mem 0x000e2000-0x000e3fff] (subtractive
decode) [ 0.186524] pci 0000:00:14.4: bridge window [mem
0x000e4000-0x000e5fff] (subtractive decode) [ 0.186528] pci
0000:00:14.4: bridge window [mem 0x000e6000-0x000e7fff] (subtractive
decode) [ 0.186531] pci 0000:00:14.4: bridge window [mem
0x000e8000-0x000e9fff] (subtractive decode) [ 0.186535] pci
0000:00:14.4: bridge window [mem 0x000ea000-0x000ebfff] (subtractive
decode) [ 0.186539] pci 0000:00:14.4: bridge window [mem
0x000ec000-0x000edfff] (subtractive decode) [ 0.186542] pci
0000:00:14.4: bridge window [mem 0x000ee000-0x000effff] (subtractive
decode) [ 0.186546] pci 0000:00:14.4: bridge window [mem
0xe0000000-0xf7ffffff] (subtractive decode) [ 0.186550] pci
0000:00:14.4: bridge window [mem 0xf8000000-0xffffffff] (subtractive
decode) [ 0.186554] pci 0000:00:14.4: bridge window [io
0x0000-0x0cf7] (subtractive decode) [ 0.186557] pci 0000:00:14.4:
bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.186674]
pci_bus 0000:00: on NUMA node 0 [ 0.187344] ACPI: PCI Interrupt Link
[LNKA] (IRQs 10 11) *0 [ 0.187511] ACPI: PCI Interrupt Link [LNKB]
(IRQs 10 11) *0 [ 0.187635] ACPI: PCI Interrupt Link [LNKC] (IRQs 10
11) *0 [ 0.187757] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
[ 0.187859] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
[ 0.187939] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
[ 0.188019] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
[ 0.188100] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
[ 0.188741] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.188869]
ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.189205] vgaarb: device added:
PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.189222]
vgaarb: loaded [ 0.189224] vgaarb: bridge control possible
0000:00:01.0 [ 0.189311] PCI: Using ACPI for IRQ routing
[ 0.190536] PCI: pci_cache_line_size set to 64 bytes [ 0.190820]
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.190825]
e820: reserve RAM buffer [mem 0xc6ceb000-0xc7ffffff] [ 0.190828]
e820: reserve RAM buffer [mem 0xc7c00000-0xc7ffffff] [ 0.190831]
e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] [ 0.191109]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.191117] hpet0: 3
comparators, 32-bit 14.318180 MHz counter [ 0.193264] Switched to
clocksource hpet [ 0.199767] pnp: PnP ACPI init [ 0.199801] ACPI:
bus type PNP registered [ 0.200067] system 00:00: [io
0x0f50-0x0f51] has been reserved [ 0.200073] system 00:00: [mem
0xfec00000-0xfec00fff] could not be reserved [ 0.200078] system
00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.200083]
system 00:00: [mem 0xf8000000-0xf9ffffff] has been reserved
[ 0.200090] system 00:00: Plug and Play ACPI device, IDs PNP0c02
(active) [ 0.200800] pnp 00:01: [dma 4] [ 0.200854] pnp 00:01:
Plug and Play ACPI device, IDs PNP0200 (active) [ 0.200926] pnp
00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.200991]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.201046] pnp 00:04: Plug and Play ACPI device, IDs PNP0800
(active) [ 0.201107] pnp 00:05: Plug and Play ACPI device, IDs
PNP0303 (active) [ 0.201185] pnp 00:06: Plug and Play ACPI device,
IDs LEN0026 PNP0f13 (active) [ 0.201362] system 00:07: [io
0x04d0-0x04d1] has been reserved [ 0.201367] system 00:07: [io
0x0530-0x0537] has been reserved [ 0.201372] system 00:07: [io
0x0800-0x0827] could not be reserved [ 0.201376] system 00:07: [io
0x0830] has been reserved [ 0.201380] system 00:07: [io
0x0840-0x0847] has been reserved [ 0.201384] system 00:07: [io
0x0b00-0x0b1f] has been reserved [ 0.201388] system 00:07: [io
0x0b20-0x0b3f] has been reserved [ 0.201392] system 00:07: [io
0x0c00-0x0c01] has been reserved [ 0.201396] system 00:07: [io
0x0c14] has been reserved [ 0.201400] system 00:07: [io
0x0c50-0x0c52] has been reserved [ 0.201404] system 00:07: [io
0x0cd0-0x0cd1] has been reserved [ 0.201408] system 00:07: [io
0x0cd2-0x0cd3] has been reserved [ 0.201412] system 00:07: [io
0x0cd4-0x0cd5] has been reserved [ 0.201415] system 00:07: [io
0x0cd6-0x0cd7] has been reserved [ 0.201419] system 00:07: [io
0x0cd8-0x0cdf] has been reserved [ 0.201423] system 00:07: [io
0x0cf9] could not be reserved [ 0.201427] system 00:07: [io
0x8100-0x81ff window] has been reserved [ 0.201431] system 00:07:
[io 0x8200-0x82ff window] has been reserved [ 0.201437] system
00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.201621]
pnp 00:08: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled]
covers only part of AMD MMCONFIG area [mem 0xf8000000-0xf9ffffff];
adding more reservations [ 0.201670] system 00:08: [mem
0x000e0000-0x000fffff] could not be reserved [ 0.201674] system
00:08: [mem 0xffe00000-0xffffffff] has been reserved [ 0.201679]
system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.201683] system 00:08: [mem 0xfed00000-0xfed003ff] has been
reserved [ 0.201687] system 00:08: [mem 0xfed61000-0xfed613ff] has
been reserved [ 0.201691] system 00:08: [mem 0xfed80000-0xfed80fff]
has been reserved [ 0.201696] system 00:08: Plug and Play ACPI
device, IDs PNP0c01 (active) [ 0.202116] pnp: PnP ACPI: found 9
devices [ 0.202123] ACPI: bus type PNP unregistered [ 0.212310]
pci 0000:03:00.0: no compatible bridge window for [mem
0xffff0000-0xffffffff pref] [ 0.212353] pci 0000:00:07.0: bridge
window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.212360] pci
0000:00:07.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus
03] add_size 200000 [ 0.212426] pci 0000:00:07.0: res[15]=[mem
0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.212431] pci 0000:00:07.0: res[13]=[io 0x1000-0x0fff]
get_res_add_size add_size 1000 [ 0.212454] pci 0000:00:07.0: BAR 15:
assigned [mem 0xf0400000-0xf06fffff pref] [ 0.212463] pci
0000:00:07.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.212469] pci
0000:00:04.0: PCI bridge to [bus 01] [ 0.212477] pci 0000:00:04.0:
bridge window [mem 0xf0200000-0xf02fffff] [ 0.212486] pci
0000:00:06.0: PCI bridge to [bus 02] [ 0.212491] pci 0000:00:06.0:
bridge window [io 0x2000-0x2fff] [ 0.212498] pci 0000:00:06.0:
bridge window [mem 0xf0100000-0xf01fffff] [ 0.212510] pci
0000:03:00.0: BAR 6: assigned [mem 0xf0400000-0xf040ffff pref]
[ 0.212514] pci 0000:00:07.0: PCI bridge to [bus 03] [ 0.212519]
pci 0000:00:07.0: bridge window [io 0x1000-0x1fff] [ 0.212525]
pci 0000:00:07.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.212531] pci 0000:00:07.0: bridge window [mem
0xf0400000-0xf06fffff pref] [ 0.212538] pci 0000:00:14.4: PCI bridge
to [bus 04] [ 0.212603] pci_bus 0000:00: resource 4 [mem
0x000a0000-0x000bffff] [ 0.212608] pci_bus 0000:00: resource 5 [mem
0x000c0000-0x000c1fff] [ 0.212611] pci_bus 0000:00: resource 6 [mem
0x000c2000-0x000c3fff] [ 0.212615] pci_bus 0000:00: resource 7 [mem
0x000c4000-0x000c5fff] [ 0.212619] pci_bus 0000:00: resource 8 [mem
0x000c6000-0x000c7fff] [ 0.212622] pci_bus 0000:00: resource 9 [mem
0x000c8000-0x000c9fff] [ 0.212626] pci_bus 0000:00: resource 10 [mem
0x000ca000-0x000cbfff] [ 0.212629] pci_bus 0000:00: resource 11 [mem
0x000cc000-0x000cdfff] [ 0.212633] pci_bus 0000:00: resource 12 [mem
0x000d0000-0x000d1fff] [ 0.212636] pci_bus 0000:00: resource 13 [mem
0x000d2000-0x000d3fff] [ 0.212640] pci_bus 0000:00: resource 14 [mem
0x000d4000-0x000d5fff] [ 0.212643] pci_bus 0000:00: resource 15 [mem
0x000d6000-0x000d7fff] [ 0.212647] pci_bus 0000:00: resource 16 [mem
0x000d8000-0x000d9fff] [ 0.212650] pci_bus 0000:00: resource 17 [mem
0x000da000-0x000dbfff] [ 0.212654] pci_bus 0000:00: resource 18 [mem
0x000dc000-0x000ddfff] [ 0.212657] pci_bus 0000:00: resource 19 [mem
0x000de000-0x000dffff] [ 0.212661] pci_bus 0000:00: resource 20 [mem
0x000e0000-0x000e1fff] [ 0.212664] pci_bus 0000:00: resource 21 [mem
0x000e2000-0x000e3fff] [ 0.212668] pci_bus 0000:00: resource 22 [mem
0x000e4000-0x000e5fff] [ 0.212672] pci_bus 0000:00: resource 23 [mem
0x000e6000-0x000e7fff] [ 0.212675] pci_bus 0000:00: resource 24 [mem
0x000e8000-0x000e9fff] [ 0.212679] pci_bus 0000:00: resource 25 [mem
0x000ea000-0x000ebfff] [ 0.212682] pci_bus 0000:00: resource 26 [mem
0x000ec000-0x000edfff] [ 0.212686] pci_bus 0000:00: resource 27 [mem
0x000ee000-0x000effff] [ 0.212689] pci_bus 0000:00: resource 28 [mem
0xe0000000-0xf7ffffff] [ 0.212693] pci_bus 0000:00: resource 29 [mem
0xf8000000-0xffffffff] [ 0.212697] pci_bus 0000:00: resource 30 [io
0x0000-0x0cf7] [ 0.212700] pci_bus 0000:00: resource 31 [io
0x0d00-0xffff] [ 0.212704] pci_bus 0000:01: resource 1 [mem
0xf0200000-0xf02fffff] [ 0.212708] pci_bus 0000:02: resource 0 [io
0x2000-0x2fff] [ 0.212712] pci_bus 0000:02: resource 1 [mem
0xf0100000-0xf01fffff] [ 0.212716] pci_bus 0000:03: resource 0 [io
0x1000-0x1fff] [ 0.212719] pci_bus 0000:03: resource 1 [mem
0xf0000000-0xf00fffff] [ 0.212723] pci_bus 0000:03: resource 2 [mem
0xf0400000-0xf06fffff pref] [ 0.212728] pci_bus 0000:04: resource 4
[mem 0x000a0000-0x000bffff] [ 0.212731] pci_bus 0000:04: resource 5
[mem 0x000c0000-0x000c1fff] [ 0.212735] pci_bus 0000:04: resource 6
[mem 0x000c2000-0x000c3fff] [ 0.212739] pci_bus 0000:04: resource 7
[mem 0x000c4000-0x000c5fff] [ 0.212742] pci_bus 0000:04: resource 8
[mem 0x000c6000-0x000c7fff] [ 0.212746] pci_bus 0000:04: resource 9
[mem 0x000c8000-0x000c9fff] [ 0.212749] pci_bus 0000:04: resource 10
[mem 0x000ca000-0x000cbfff] [ 0.212753] pci_bus 0000:04: resource 11
[mem 0x000cc000-0x000cdfff] [ 0.212756] pci_bus 0000:04: resource 12
[mem 0x000d0000-0x000d1fff] [ 0.212760] pci_bus 0000:04: resource 13
[mem 0x000d2000-0x000d3fff] [ 0.212763] pci_bus 0000:04: resource 14
[mem 0x000d4000-0x000d5fff] [ 0.212767] pci_bus 0000:04: resource 15
[mem 0x000d6000-0x000d7fff] [ 0.212770] pci_bus 0000:04: resource 16
[mem 0x000d8000-0x000d9fff] [ 0.212774] pci_bus 0000:04: resource 17
[mem 0x000da000-0x000dbfff] [ 0.212777] pci_bus 0000:04: resource 18
[mem 0x000dc000-0x000ddfff] [ 0.212780] pci_bus 0000:04: resource 19
[mem 0x000de000-0x000dffff] [ 0.212784] pci_bus 0000:04: resource 20
[mem 0x000e0000-0x000e1fff] [ 0.212787] pci_bus 0000:04: resource 21
[mem 0x000e2000-0x000e3fff] [ 0.212791] pci_bus 0000:04: resource 22
[mem 0x000e4000-0x000e5fff] [ 0.212794] pci_bus 0000:04: resource 23
[mem 0x000e6000-0x000e7fff] [ 0.212798] pci_bus 0000:04: resource 24
[mem 0x000e8000-0x000e9fff] [ 0.212802] pci_bus 0000:04: resource 25
[mem 0x000ea000-0x000ebfff] [ 0.212806] pci_bus 0000:04: resource 26
[mem 0x000ec000-0x000edfff] [ 0.212809] pci_bus 0000:04: resource 27
[mem 0x000ee000-0x000effff] [ 0.212813] pci_bus 0000:04: resource 28
[mem 0xe0000000-0xf7ffffff] [ 0.212816] pci_bus 0000:04: resource 29
[mem 0xf8000000-0xffffffff] [ 0.212820] pci_bus 0000:04: resource 30
[io 0x0000-0x0cf7] [ 0.212823] pci_bus 0000:04: resource 31 [io
0x0d00-0xffff] [ 0.212923] NET: Registered protocol family 2
[ 0.213325] TCP established hash table entries: 32768 (order: 6,
262144 bytes) [ 0.213497] TCP bind hash table entries: 32768 (order:
7, 524288 bytes) [ 0.213758] TCP: Hash tables configured
(established 32768 bind 32768) [ 0.213860] TCP: reno registered
[ 0.213873] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.213915] UDP-Lite hash table entries: 2048 (order: 4, 65536
bytes) [ 0.214171] NET: Registered protocol family 1 [ 0.214206]
pci 0000:00:01.0: Boot video device [ 0.340349] PCI: CLS 32 bytes,
default 64 [ 0.340449] Unpacking initramfs... [ 0.504434] Freeing
initrd memory: 4700K (ffff8800376c2000 - ffff880037b59000)
[ 0.504446] PCI-DMA: Using software bounce buffering for IO
(SWIOTLB) [ 0.504451] software IO TLB [mem 0xc2ceb000-0xc6ceb000]
(64MB) mapped at [ffff8800c2ceb000-ffff8800c6ceafff] [ 0.504727] LVT
offset 0 assigned for vector 0x400 [ 0.504843] perf: AMD IBS
detected (0x000000ff) [ 0.505631] futex hash table entries: 512
(order: 3, 32768 bytes) [ 0.505770] audit: initializing netlink
subsys (disabled) [ 0.505805] audit: type=2000
audit(1393860031.403:1): initialized [ 0.506408] HugeTLB registered
2 MB page size, pre-allocated 0 pages [ 0.506888] SGI XFS with ACLs,
security attributes, large block/inode numbers, no debug enabled
[ 0.507223] msgmni has been set to 7107 [ 0.508149] alg: No test
for stdrng (krng) [ 0.508211] Block layer SCSI generic (bsg) driver
version 0.4 loaded (major 253) [ 0.508219] io scheduler noop
registered [ 0.508237] io scheduler cfq registered (default)
[ 0.508698] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.509020] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.509278] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 0.509448] pcieport 0000:00:04.0: Signaling PME through PCIe PME
interrupt [ 0.509453] pci 0000:01:00.0: Signaling PME through PCIe
PME interrupt [ 0.509459] pcie_pme 0000:00:04.0:pcie01: service
driver pcie_pme loaded [ 0.509485] pcieport 0000:00:06.0: Signaling
PME through PCIe PME interrupt [ 0.509489] pci 0000:02:00.0:
Signaling PME through PCIe PME interrupt [ 0.509495] pcie_pme
0000:00:06.0:pcie01: service driver pcie_pme loaded [ 0.509525]
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 0.509529] pci 0000:03:00.0: Signaling PME through PCIe PME
interrupt [ 0.509535] pcie_pme 0000:00:07.0:pcie01: service driver
pcie_pme loaded [ 0.509545] pci_hotplug: PCI Hot Plug PCI Core
version: 0.5 [ 0.509641] GHES: HEST is not enabled! [ 0.509785]
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.510790]
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64
irq 1,12 [ 0.514775] i8042: Detected active multiplexing controller,
rev 1.1 [ 0.516372] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.516383] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.516403] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.516407] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.516411] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.516728] mousedev: PS/2 mouse device common for all mice
[ 0.516863] rtc_cmos 00:03: RTC can wake from S4 [ 0.517121]
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.517215]
rtc_cmos 00:03: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.517368] drop_monitor: Initializing network drop monitor service
[ 0.517461] TCP: cubic registered [ 0.517563] NET: Registered
protocol family 10 [ 0.517963] NET: Registered protocol family 17
[ 0.518503] registered taskstats version 1 [ 0.519235] rtc_cmos
00:03: setting system clock to 2014-03-03 15:20:32 UTC (1393860032)
[ 0.521165] Freeing unused kernel memory: 836K (ffffffff81894000 -
ffffffff81965000) [ 0.521173] Write protecting the kernel read-only
data: 8192k [ 0.530171] Freeing unused kernel memory: 1756K
(ffff880001449000 - ffff880001600000) [ 0.533393] Freeing unused
kernel memory: 620K (ffff880001765000 - ffff880001800000)
[ 0.565470] input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input0 [ 0.702521]
systemd-udevd[59]: starting version 204 [ 0.761883] atl1c
0000:02:00.0: version 1.0.1.1-NAPI [ 0.772791] rtsx_pci
0000:03:00.0: irq 43 for MSI/MSI-X [ 0.772817] rtsx_pci
0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 43
[ 0.786099] ACPI: bus type USB registered [ 0.786163] usbcore:
registered new interface driver usbfs [ 0.786196] usbcore:
registered new interface driver hub [ 0.787422] thermal LNXTHERM:00:
registered as thermal_zone0 [ 0.787431] ACPI: Thermal Zone [THZ0]
(74 C) [ 0.788180] SCSI subsystem initialized [ 0.789031]
usbcore: registered new device driver usb [ 0.789818] ehci_hcd: USB
2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.790272] ehci-pci:
EHCI PCI platform driver [ 0.790396] ohci_hcd: USB 1.1 'Open' Host
Controller (OHCI) Driver [ 0.790709] ohci-pci: OHCI PCI platform
driver [ 0.790715] QUIRK: Enable AMD PLL fix [ 0.790808] ehci-pci
0000:00:12.2: EHCI Host Controller [ 0.790822] ehci-pci
0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.790834] ehci-pci 0000:00:12.2: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.790896] ehci-pci
0000:00:12.2: debug port 1 [ 0.790959] ehci-pci 0000:00:12.2: irq
17, io mem 0xf034a500 [ 0.792755] libata version 3.00 loaded.
[ 0.796468] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.796682] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002 [ 0.796687] usb usb1: New USB device strings: Mfr=3,
Product=2, SerialNumber=1 [ 0.796691] usb usb1: Product: EHCI Host
Controller [ 0.796695] usb usb1: Manufacturer: Linux 3.14.0-rc5
ehci_hcd [ 0.796698] usb usb1: SerialNumber: 0000:00:12.2
[ 0.796963] hub 1-0:1.0: USB hub found [ 0.796980] hub 1-0:1.0: 5
ports detected [ 0.797752] ehci-pci 0000:00:13.2: EHCI Host
Controller [ 0.797767] ehci-pci 0000:00:13.2: new USB bus
registered, assigned bus number 2 [ 0.797776] ehci-pci 0000:00:13.2:
applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.797792] ehci-pci 0000:00:13.2: debug port 1 [ 0.797838]
ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a400 [ 0.803373]
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.803479] usb
usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.803484] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1 [ 0.803488] usb usb2: Product: EHCI Host Controller
[ 0.803492] usb usb2: Manufacturer: Linux 3.14.0-rc5 ehci_hcd
[ 0.803495] usb usb2: SerialNumber: 0000:00:13.2 [ 0.804288] hub
2-0:1.0: USB hub found [ 0.804310] hub 2-0:1.0: 5 ports detected
[ 0.805000] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 0.805026] ohci-pci 0000:00:12.0: new USB bus registered, assigned
bus number 3 [ 0.805142] ohci-pci 0000:00:12.0: irq 18, io mem
0xf0349000 [ 0.859727] usb usb3: New USB device found,
idVendor=1d6b, idProduct=0001 [ 0.859736] usb usb3: New USB device
strings: Mfr=3, Product=2, SerialNumber=1 [ 0.859741] usb usb3:
Product: OHCI PCI host controller [ 0.859744] usb usb3:
Manufacturer: Linux 3.14.0-rc5 ohci_hcd [ 0.859748] usb usb3:
SerialNumber: 0000:00:12.0 [ 0.860070] hub 3-0:1.0: USB hub found
[ 0.860142] hub 3-0:1.0: 5 ports detected [ 0.860546] ahci
0000:00:11.0: version 3.0 [ 0.860907] ahci 0000:00:11.0: AHCI
0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [ 0.860914]
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum
part [ 0.868041] scsi0 : ahci [ 0.868202] ata1: SATA max UDMA/133
abar m1024@0xf034a000 port 0xf034a100 irq 19 [ 0.868648] ohci-pci
0000:00:13.0: OHCI PCI host controller [ 0.868670] ohci-pci
0000:00:13.0: new USB bus registered, assigned bus number 4
[ 0.868777] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0348000
[ 0.878088] microcode: CPU0: patch_level=0x05000101 [ 0.884259]
microcode: CPU0: new patch_level=0x05000119 [ 0.895149] microcode:
CPU1: patch_level=0x05000101 [ 0.901259] microcode: CPU1: new
patch_level=0x05000119 [ 0.902455] microcode: Microcode Update
Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.923607]
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.923616] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1 [ 0.923620] usb usb4: Product: OHCI PCI host
controller [ 0.923624] usb usb4: Manufacturer: Linux 3.14.0-rc5
ohci_hcd [ 0.923628] usb usb4: SerialNumber: 0000:00:13.0
[ 0.923990] hub 4-0:1.0: USB hub found [ 0.924011] hub 4-0:1.0: 5
ports detected [ 1.106739] usb 2-5: new high-speed USB device number
2 using ehci-pci [ 1.234596] usb 2-5: New USB device found,
idVendor=5986, idProduct=01a6 [ 1.234611] usb 2-5: New USB device
strings: Mfr=1, Product=2, SerialNumber=3 [ 1.234619] usb 2-5:
Product: Integrated Camera [ 1.234626] usb 2-5: Manufacturer: Image
Processor [ 1.234631] usb 2-5: SerialNumber: Integrated Camera
[ 1.328689] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.355647] ata1.00: ATA-8: ST320LT007-9ZV142, 0004LVM1, max
UDMA/133 [ 1.355657] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ
(depth 31/32) [ 1.359554] ata1.00: configured for UDMA/133
[ 1.360154] scsi 0:0:0:0: Direct-Access ATA
ST320LT007-9ZV14 0004 PQ: 0 ANSI: 5 [ 1.371367] sd 0:0:0:0: [sda]
625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.371377] sd
0:0:0:0: [sda] 4096-byte physical blocks [ 1.371747] sd 0:0:0:0:
[sda] Write Protect is off [ 1.371753] sd 0:0:0:0: [sda] Mode Sense:
00 3a 00 00 [ 1.371795] sd 0:0:0:0: [sda] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA [ 1.385552] sda: sda1
sda2 [ 1.387028] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.390557]
sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.505693] tsc:
Refined TSC clocksource calibration: 1646.492 MHz [ 1.725719]
device-mapper: uevent: version 1.0.3 [ 1.725828] device-mapper:
ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.734716] random: lvm urandom read with 60 bits of entropy
available [ 2.506210] Switched to clocksource tsc [ 3.257829]
random: nonblocking pool is initialized [ 6.442224] sha256_ssse3:
Using SSSE3 optimized SHA-256 implementation [ 6.444710] bio: create
slab <bio-1> at 1 [ 6.666335] bio: create slab <bio-1> at 1
[ 7.086264] PM: Starting manual resume from disk [ 7.092253] XFS
(dm-1): Mounting Filesystem [ 7.298350] XFS (dm-1): Ending clean
mount [ 10.245772] systemd-udevd[427]: starting version 204
[ 11.845425] snd_hda_intel 0000:00:01.1: irq 44 for MSI/MSI-X
[ 11.932703] ACPI: acpi_idle registered with cpuidle [ 11.979458]
input: HD-Audio Generic HDMI/DP,pcm=3
as /devices/pci0000:00/0000:00:01.1/sound/card0/input5 [ 11.993048]
hda_codec: CX20590: BIOS auto-probing. [ 11.994715] input: HDA
Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[ 12.054192] ACPI Warning: SystemIO range
0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion
0x0000000000000b00-0x0000000000000b0f (\_SB_.PCI0.SMB_.SMB0)
(20131218/utaddress-258) [ 12.054208] ACPI: If an ACPI driver is
available for this device, you should use it instead of the native
driver [ 12.110101] ACPI: Video Device [VGA] (multi-head: yes rom:
no post: no) [ 12.110131] [Firmware Bug]: ACPI: No _BQC method,
cannot determine initial brightness [ 12.110228] [Firmware Bug]:
ACPI: No _BQC method, cannot determine initial brightness
[ 12.113207] acpi device:02: registered as cooling_device2
[ 12.113316] input: Video Bus
as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
[ 12.113436] ACPI: Video Device [VGA1] (multi-head: yes rom: no
post: no) [ 12.133242] acpi device:38: registered as cooling_device3
[ 12.133376] input: Video Bus
as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 12.170303] Linux video capture interface: v2.00 [ 12.197243]
cfg80211: Calling CRDA to update world regulatory domain [ 12.219165]
Intel(R) Wireless WiFi driver for Linux, in-tree: [ 12.219172]
Copyright(c) 2003- 2014 Intel Corporation [ 12.219661] iwlwifi
0000:01:00.0: irq 45 for MSI/MSI-X [ 12.269003] ACPI: AC Adapter
[ACAD] (on-line) [ 12.304159] ACPI: Battery Slot [BAT1] (battery
present) [ 12.304295] input: Power Button
as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input9
[ 12.304306] ACPI: Power Button [PWRB] [ 12.304386] input: Sleep
Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input10
[ 12.304391] ACPI: Sleep Button [SLPB] [ 12.304514] input: Lid
Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input11
[ 12.304857] ACPI: Lid Switch [LID] [ 12.304994] input: Power
Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12 [ 12.305001]
ACPI: Power Button [PWRF] [ 12.325266] acpi-cpufreq: overriding BIOS
provided _PSD data [ 12.344764] Linux agpgart interface v0.103
[ 12.374346] [drm] Initialized drm 1.1.0 20060810 [ 12.446977]
Non-volatile memory driver v1.3 [ 12.453842] wmi: Mapper loaded
[ 12.489927] input: PC Speaker
as /devices/platform/pcspkr/input/input13 [ 12.512101] uvcvideo:
Found UVC 1.00 device Integrated Camera (5986:01a6) [ 12.513891]
input: Integrated Camera
as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.0/input/input14
[ 12.514037] usbcore: registered new interface driver uvcvideo
[ 12.514041] USB Video Class driver (1.1.1) [ 12.622854]
thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 12.622862] thinkpad_acpi:
http://ibm-acpi.sf.net/ [ 12.622866] thinkpad_acpi: ThinkPad BIOS
8RET52WW (1.15 ), EC unknown [ 12.622869] thinkpad_acpi: Lenovo
ThinkPad X121e, model 30515YG [ 12.623358] thinkpad_acpi: Unsupported
brightness interface, please contact
ibm-acpi-devel@lists.sourceforge.net [ 12.624220] thinkpad_acpi:
radio switch found; radios are enabled [ 12.624271] thinkpad_acpi:
possible tablet mode switch found; ThinkPad in laptop mode
[ 12.624310] thinkpad_acpi: This ThinkPad has standard ACPI backlight
brightness control, supported by the ACPI video driver [ 12.624313]
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 12.647985] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio
is blocked [ 12.649643] thinkpad_acpi: Console audio control enabled,
mode: monitor (read only) [ 12.654396] input: ThinkPad Extra Buttons
as /devices/platform/thinkpad_acpi/input/input15 [ 12.664347] input:
HDA ATI SB Headphone
as /devices/pci0000:00/0000:00:14.2/sound/card1/input17 [ 12.664615]
input: HDA ATI SB Mic
as /devices/pci0000:00/0000:00:14.2/sound/card1/input16 [ 12.994110]
iwlwifi 0000:01:00.0: loaded firmware version 9.221.4.1 build 25532
op_mode iwldvm [ 13.318102] [drm] radeon kernel modesetting enabled.
[ 13.319255] [drm] initializing kernel modesetting (PALM
0x1002:0x9806 0x17AA:0x21EC). [ 13.319311] [drm] register mmio base:
0xF0300000 [ 13.319313] [drm] register mmio size: 262144
[ 13.319414] ATOM BIOS: Lenovo [ 13.319489] radeon 0000:00:01.0:
VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 13.319494] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 -
0x0000000057FFFFFF [ 13.319497] [drm] Detected VRAM RAM=384M,
BAR=256M [ 13.319500] [drm] RAM width 32bits DDR [ 13.319593] [TTM]
Zone kernel: Available graphics memory: 1821058 kiB [ 13.319596]
[TTM] Initializing pool allocator [ 13.319606] [TTM] Initializing DMA
pool allocator [ 13.319648] [drm] radeon: 384M of VRAM memory ready
[ 13.319651] [drm] radeon: 1024M of GTT memory ready. [ 13.319673]
[drm] Loading PALM Microcode [ 13.350105] iwlwifi 0000:01:00.0:
CONFIG_IWLWIFI_DEBUG disabled [ 13.350120] iwlwifi 0000:01:00.0:
CONFIG_IWLWIFI_DEBUGFS disabled [ 13.350128] iwlwifi 0000:01:00.0:
CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 13.350137] iwlwifi
0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN,
REV=0x74 [ 13.350365] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 13.432938] usb 3-4: new full-speed USB device number 2 using
ohci-pci [ 13.589577] usb 3-4: New USB device found, idVendor=0a5c,
idProduct=217f [ 13.589592] usb 3-4: New USB device strings: Mfr=1,
Product=2, SerialNumber=3 [ 13.589600] usb 3-4: Product: Broadcom
Bluetooth Device [ 13.589607] usb 3-4: Manufacturer: Broadcom Corp
[ 13.589613] usb 3-4: SerialNumber: E4D53DC801B2 [ 13.609251]
ieee80211 phy0: Selected rate control algorithm
'iwl-agn-rs' [ 13.720002] psmouse serio4: synaptics: Touchpad model:
1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x123c00, board id:
1917, fw id: 864720 [ 13.720031] psmouse serio4: synaptics: serio:
Synaptics pass-through port at isa0060/serio4/input0 [ 13.763378]
input: SynPS/2 Synaptics TouchPad
as /devices/platform/i8042/serio4/input/input21 [ 13.907564] [drm]
Internal thermal controller without fan control [ 13.907769] [drm]
Found smc ucode version: 0x00010601 [ 13.908034] [drm] radeon: dpm
initialized [ 13.926141] [drm] GART: num cpu pages 262144, num gpu
pages 262144 [ 13.947069] [drm] PCIE GART of 1024M enabled (table at
0x0000000000273000). [ 13.947701] radeon 0000:00:01.0: WB enabled
[ 13.947715] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr
0x0000000018000c00 and cpu addr 0xffff8800376f0c00 [ 13.947724]
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr
0x0000000018000c0c and cpu addr 0xffff8800376f0c0c [ 13.949267]
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr
0x0000000000072118 and cpu addr 0xffffc900028b2118 [ 13.949346] [drm]
Supports vblank timestamp caching Rev 2 (21.10.2013). [ 13.949358]
[drm] Driver supports precise vblank timestamp query. [ 13.949409]
radeon 0000:00:01.0: irq 46 for MSI/MSI-X [ 13.949440] radeon
0000:00:01.0: radeon: using MSI. [ 13.949492] [drm] radeon: irq
initialized. [ 13.967614] [drm] ring test on 0 succeeded in 1 usecs
[ 13.967698] [drm] ring test on 3 succeeded in 1 usecs [ 14.024184]
[drm] ring test on 5 succeeded in 1 usecs [ 14.044314] [drm] UVD
initialized successfully. [ 14.045325] [drm] ib test on ring 0
succeeded in 0 usecs [ 14.045426] [drm] ib test on ring 3 succeeded
in 0 usecs [ 14.064586] Bluetooth: Core ver 2.18 [ 14.064672] NET:
Registered protocol family 31 [ 14.064676] Bluetooth: HCI device and
connection manager initialized [ 14.065105] Bluetooth: HCI socket
layer initialized [ 14.065113] Bluetooth: L2CAP socket layer
initialized [ 14.065142] Bluetooth: SCO socket layer initialized
[ 14.066485] [drm] ib test on ring 5 succeeded [ 14.138967] [drm]
radeon atom DIG backlight initialized [ 14.138989] [drm] Radeon
Display Connectors [ 14.138995] [drm] Connector 0: [ 14.139003]
[drm] LVDS-1 [ 14.139007] [drm] HPD1 [ 14.139015] [drm] DDC:
0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 14.139020]
[drm] Encoders: [ 14.139024] [drm] LCD1: INTERNAL_UNIPHY
[ 14.139028] [drm] Connector 1: [ 14.139033] [drm] HDMI-A-1
[ 14.139036] [drm] HPD2 [ 14.139043] [drm] DDC: 0x6440 0x6440
0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 14.139046] [drm]
Encoders: [ 14.139050] [drm] DFP1: INTERNAL_UNIPHY [ 14.139054]
[drm] Connector 2: [ 14.139058] [drm] VGA-1 [ 14.139064] [drm]
DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 14.139068] [drm] Encoders: [ 14.139072] [drm] CRT1:
INTERNAL_KLDSCP_DAC1 [ 14.335848] usbcore: registered new interface
driver btusb [ 14.390389] cfg80211: World regulatory domain updated:
[ 14.390406] cfg80211: DFS Master region: unset [ 14.390411]
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp) [ 14.390419] cfg80211: (2402000 KHz - 2472000 KHz @ 40000
KHz), (N/A, 2000 mBm) [ 14.390426] cfg80211: (2457000 KHz - 2482000
KHz @ 40000 KHz), (N/A, 2000 mBm) [ 14.390431] cfg80211: (2474000
KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 14.390437]
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 14.390442] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz),
(N/A, 2000 mBm) [ 14.390448] cfg80211: (57240000 KHz - 63720000 KHz
@ 2160000 KHz), (N/A, 0 mBm) [ 14.390799] cfg80211: Calling CRDA for
country: DE [ 14.419151] cfg80211: Regulatory domain changed to
country: DE [ 14.419163] cfg80211: DFS Master region: ETSI
[ 14.419169] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp) [ 14.419175] cfg80211: (2400000 KHz -
2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 14.419179] cfg80211:
(5150000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 14.419182]
cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm)
[ 14.419186] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz),
(N/A, 4000 mBm) [ 14.563465] [drm] fb mappable at 0xE0477000
[ 14.563474] [drm] vram apper at 0xE0000000 [ 14.563477] [drm] size
4325376 [ 14.563480] [drm] fb depth is 24 [ 14.563483] [drm]
pitch is 5632 [ 14.563767] fbcon: radeondrmfb (fb0) is primary device
[ 15.127958] Console: switching to colour frame buffer device 170x48
[ 15.134456] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer
device [ 15.134460] radeon 0000:00:01.0: registered panic notifier
[ 15.135419] [drm] Initialized radeon 2.37.0 20080528 for
0000:00:01.0 on minor 0 [ 16.792941] Adding 4001788k swap
on /dev/mapper/encrypted-swap. Priority:-1 extents:1 across:4001788k
[ 16.878938] psmouse serio5: alps: Unknown ALPS touchpad: E7=10 00
64, EC=10 00 64 [ 18.256795] psmouse serio5: trackpoint: IBM
TrackPoint firmware: 0x0e, buttons: 3/3 [ 18.483078] input: TPPS/2
IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input22
[ 19.372185] fuse init (API version 7.22) [ 19.572798] loop: module
loaded [ 20.150009] XFS (sda1): Mounting Filesystem [ 20.281452]
XFS (sda1): Ending clean mount
next reply other threads:[~2014-03-10 10:04 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-10 10:04 Julian Wollrath [this message]
2014-03-10 10:27 ` [RESEND] Fast TSC calibration fails with v3.14-rc1 and later Paul Bolle
2014-03-10 14:06 ` Thomas Gleixner
2014-03-10 15:28 ` Paul Bolle
2014-03-10 17:04 ` Thomas Gleixner
2014-03-10 18:32 ` Paul Bolle
2014-03-10 18:57 ` Thomas Gleixner
2014-03-10 19:19 ` Paul Bolle
2014-03-10 20:50 ` Thomas Gleixner
2014-03-10 23:06 ` Paul Bolle
2014-03-11 16:02 ` Thomas Gleixner
2014-03-11 13:27 ` Julian Wollrath
2014-03-10 10:39 ` Thomas Gleixner
2014-03-11 13:29 ` Julian Wollrath
2014-03-11 13:56 ` Thomas Gleixner
2014-03-11 17:15 ` Julian Wollrath
2014-03-12 4:00 ` joeyli
2014-03-12 10:20 ` Julian Wollrath
2014-03-12 13:52 ` joeyli
2014-03-12 11:20 ` Rafael J. Wysocki
2014-03-12 13:30 ` Rafael J. Wysocki
2014-03-12 13:55 ` Julian Wollrath
2014-03-12 15:41 ` joeyli
2014-03-12 16:20 ` Thomas Gleixner
2014-03-12 16:23 ` Thomas Gleixner
2014-03-12 16:39 ` Thomas Gleixner
2014-03-12 23:27 ` Rafael J. Wysocki
2014-03-12 23:49 ` Thomas Gleixner
2014-03-13 0:13 ` Rafael J. Wysocki
2014-03-13 2:56 ` joeyli
2014-03-13 0:54 ` Thomas Gleixner
2014-03-13 1:01 ` Thomas Gleixner
2014-03-13 2:38 ` joeyli
2014-03-13 3:11 ` H. Peter Anvin
2014-03-13 3:55 ` joeyli
2014-03-13 3:59 ` H. Peter Anvin
2014-03-13 4:12 ` joeyli
2014-03-13 8:12 ` Thomas Gleixner
2014-03-13 8:59 ` joeyli
2014-03-13 3:41 ` H. Peter Anvin
2014-03-12 14:00 ` joeyli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140310110410.5b2218f6@ilfaris \
--to=jwollrath@web.de \
--cc=linux-kernel@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.