From: Davide Berardi <berardi.dav@gmail.com>
To: gregkh@linuxfoundation.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] fixing some coding style issues on line6 driver.c
Date: Sun, 16 Mar 2014 13:20:16 +0100 [thread overview]
Message-ID: <20140316132016.388a3f69@White-Rabbit> (raw)
Fixed some over-80 characters lines.
(this is for eudyptula challenge task 10).
From: Davide Berardi <berardi.dav@gmail.com>
Signed-off-by: Davide Berardi <berardi.dav@gmail.com>
---
diff --git a/drivers/staging/line6/driver.c b/drivers/staging/line6/driver.c
index e7a9d8d..b3652e6 100644
--- a/drivers/staging/line6/driver.c
+++ b/drivers/staging/line6/driver.c
@@ -59,26 +59,46 @@ MODULE_DEVICE_TABLE(usb, line6_id_table);
/* *INDENT-OFF* */
static struct line6_properties line6_properties_table[] = {
- { LINE6_BIT_BASSPODXT, "BassPODxt", "BassPODxt", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_BASSPODXTLIVE, "BassPODxtLive", "BassPODxt Live", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_BASSPODXTPRO, "BassPODxtPro", "BassPODxt Pro", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_GUITARPORT, "GuitarPort", "GuitarPort", LINE6_BIT_PCM },
- { LINE6_BIT_POCKETPOD, "PocketPOD", "Pocket POD", LINE6_BIT_CONTROL },
- { LINE6_BIT_PODHD300, "PODHD300", "POD HD300", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_PODHD400, "PODHD400", "POD HD400", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_PODHD500, "PODHD500", "POD HD500", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_PODSTUDIO_GX, "PODStudioGX", "POD Studio GX", LINE6_BIT_PCM },
- { LINE6_BIT_PODSTUDIO_UX1, "PODStudioUX1", "POD Studio UX1", LINE6_BIT_PCM },
- { LINE6_BIT_PODSTUDIO_UX2, "PODStudioUX2", "POD Studio UX2", LINE6_BIT_PCM },
- { LINE6_BIT_PODX3, "PODX3", "POD X3", LINE6_BIT_PCM },
- { LINE6_BIT_PODX3LIVE, "PODX3Live", "POD X3 Live", LINE6_BIT_PCM },
- { LINE6_BIT_PODXT, "PODxt", "PODxt", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_PODXTLIVE, "PODxtLive", "PODxt Live", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_PODXTPRO, "PODxtPro", "PODxt Pro", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_TONEPORT_GX, "TonePortGX", "TonePort GX", LINE6_BIT_PCM },
- { LINE6_BIT_TONEPORT_UX1, "TonePortUX1", "TonePort UX1", LINE6_BIT_PCM },
- { LINE6_BIT_TONEPORT_UX2, "TonePortUX2", "TonePort UX2", LINE6_BIT_PCM },
- { LINE6_BIT_VARIAX, "Variax", "Variax Workbench", LINE6_BIT_CONTROL },
+ { LINE6_BIT_BASSPODXT, "BassPODxt",
+ "BassPODxt", LINE6_BIT_CONTROL_PCM_HWMON },
+ { LINE6_BIT_BASSPODXTLIVE, "BassPODxtLive",
+ "BassPODxt Live", LINE6_BIT_CONTROL_PCM_HWMON },
+ { LINE6_BIT_BASSPODXTPRO, "BassPODxtPro",
+ "BassPODxt Pro", LINE6_BIT_CONTROL_PCM_HWMON },
+ { LINE6_BIT_GUITARPORT, "GuitarPort",
+ "GuitarPort", LINE6_BIT_PCM },
+ { LINE6_BIT_POCKETPOD, "PocketPOD",
+ "Pocket POD", LINE6_BIT_CONTROL },
+ { LINE6_BIT_PODHD300, "PODHD300",
+ "POD HD300", LINE6_BIT_CONTROL_PCM_HWMON },
+ { LINE6_BIT_PODHD400, "PODHD400",
+ "POD HD400", LINE6_BIT_CONTROL_PCM_HWMON },
+ { LINE6_BIT_PODHD500, "PODHD500",
+ "POD HD500", LINE6_BIT_CONTROL_PCM_HWMON },
+ { LINE6_BIT_PODSTUDIO_GX, "PODStudioGX",
+ "POD Studio GX", LINE6_BIT_PCM },
+ { LINE6_BIT_PODSTUDIO_UX1, "PODStudioUX1",
+ "POD Studio UX1", LINE6_BIT_PCM },
+ { LINE6_BIT_PODSTUDIO_UX2, "PODStudioUX2",
+ "POD Studio UX2", LINE6_BIT_PCM },
+ { LINE6_BIT_PODX3, "PODX3",
+ "POD X3", LINE6_BIT_PCM },
+ { LINE6_BIT_PODX3LIVE, "PODX3Live",
+ "POD X3 Live", LINE6_BIT_PCM },
+ { LINE6_BIT_PODXT, "PODxt",
+ "PODxt", LINE6_BIT_CONTROL_PCM_HWMON },
+ { LINE6_BIT_PODXTLIVE, "PODxtLive",
+ "PODxt Live", LINE6_BIT_CONTROL_PCM_HWMON },
+ { LINE6_BIT_PODXTPRO, "PODxtPro",
+ "PODxt Pro", LINE6_BIT_CONTROL_PCM_HWMON },
+ { LINE6_BIT_TONEPORT_GX, "TonePortGX",
+ "TonePort GX", LINE6_BIT_PCM },
+ { LINE6_BIT_TONEPORT_UX1, "TonePortUX1",
+ "TonePort UX1", LINE6_BIT_PCM },
+ { LINE6_BIT_TONEPORT_UX2, "TonePortUX2",
+ "TonePort UX2", LINE6_BIT_PCM },
+ { LINE6_BIT_VARIAX, "Variax",
+ "Variax Workbench", LINE6_BIT_CONTROL },
};
/* *INDENT-ON* */
@@ -152,10 +172,10 @@ int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
int retval;
retval = usb_interrupt_msg(line6->usbdev,
- usb_sndintpipe(line6->usbdev,
- line6->ep_control_write),
- (char *)frag_buf, frag_size,
- &partial, LINE6_TIMEOUT * HZ);
+ usb_sndintpipe(line6->usbdev,
+ line6->ep_control_write),
+ (char *)frag_buf, frag_size,
+ &partial, LINE6_TIMEOUT * HZ);
if (retval) {
dev_err(line6->ifcdev,
next reply other threads:[~2014-03-16 12:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-16 12:20 Davide Berardi [this message]
2014-03-16 16:37 ` [PATCH] fixing some coding style issues on line6 driver.c Greg KH
2014-03-16 16:55 ` Joe Perches
2014-03-17 2:34 ` Davide Berardi
2014-03-17 19:08 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140316132016.388a3f69@White-Rabbit \
--to=berardi.dav@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.