From: Davide Berardi <berardi.dav@gmail.com>
To: gregkh@linuxfoundation.org
Cc: joe@perches.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] fixing some coding style issues on line6 driver.c
Date: Mon, 17 Mar 2014 03:34:41 +0100 [thread overview]
Message-ID: <20140317033441.125d2212@White-Rabbit> (raw)
In-Reply-To: <1394988926.5689.39.camel@joe-AO722>
Thanks for your replies, I've applied your suggestions to the patch.
Davide
Fixed some line over 80 characters.
From: Davide Berardi <berardi.dav@gmail.com>
Signed-off-by: Davide Berardi <berardi.dav@gmail.com>
---
drivers/staging/line6/driver.c | 54 ++++++++++++++++++++++-------------------
drivers/staging/line6/usbdefs.h | 2 +-
2 files changed, 30 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/line6/driver.c b/drivers/staging/line6/driver.c
index e7a9d8d..77f1b42 100644
--- a/drivers/staging/line6/driver.c
+++ b/drivers/staging/line6/driver.c
@@ -57,28 +57,32 @@ static const struct usb_device_id line6_id_table[] = {
MODULE_DEVICE_TABLE(usb, line6_id_table);
+#define L6PROP(dev_bit, dev_id, dev_name, dev_cap)\
+ {.device_bit = LINE6_BIT_##dev_bit, .id = dev_id,\
+ .name = dev_name, .capabilities = LINE6_BIT_##dev_cap}
+
/* *INDENT-OFF* */
-static struct line6_properties line6_properties_table[] = {
- { LINE6_BIT_BASSPODXT, "BassPODxt", "BassPODxt", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_BASSPODXTLIVE, "BassPODxtLive", "BassPODxt Live", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_BASSPODXTPRO, "BassPODxtPro", "BassPODxt Pro", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_GUITARPORT, "GuitarPort", "GuitarPort", LINE6_BIT_PCM },
- { LINE6_BIT_POCKETPOD, "PocketPOD", "Pocket POD", LINE6_BIT_CONTROL },
- { LINE6_BIT_PODHD300, "PODHD300", "POD HD300", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_PODHD400, "PODHD400", "POD HD400", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_PODHD500, "PODHD500", "POD HD500", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_PODSTUDIO_GX, "PODStudioGX", "POD Studio GX", LINE6_BIT_PCM },
- { LINE6_BIT_PODSTUDIO_UX1, "PODStudioUX1", "POD Studio UX1", LINE6_BIT_PCM },
- { LINE6_BIT_PODSTUDIO_UX2, "PODStudioUX2", "POD Studio UX2", LINE6_BIT_PCM },
- { LINE6_BIT_PODX3, "PODX3", "POD X3", LINE6_BIT_PCM },
- { LINE6_BIT_PODX3LIVE, "PODX3Live", "POD X3 Live", LINE6_BIT_PCM },
- { LINE6_BIT_PODXT, "PODxt", "PODxt", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_PODXTLIVE, "PODxtLive", "PODxt Live", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_PODXTPRO, "PODxtPro", "PODxt Pro", LINE6_BIT_CONTROL_PCM_HWMON },
- { LINE6_BIT_TONEPORT_GX, "TonePortGX", "TonePort GX", LINE6_BIT_PCM },
- { LINE6_BIT_TONEPORT_UX1, "TonePortUX1", "TonePort UX1", LINE6_BIT_PCM },
- { LINE6_BIT_TONEPORT_UX2, "TonePortUX2", "TonePort UX2", LINE6_BIT_PCM },
- { LINE6_BIT_VARIAX, "Variax", "Variax Workbench", LINE6_BIT_CONTROL },
+static const struct line6_properties line6_properties_table[] = {
+ L6PROP(BASSPODXT, "BassPODxt", "BassPODxt", CTRL_PCM_HW),
+ L6PROP(BASSPODXTLIVE, "BassPODxtLive", "BassPODxt Live", CTRL_PCM_HW),
+ L6PROP(BASSPODXTPRO, "BassPODxtPro", "BassPODxt Pro", CTRL_PCM_HW),
+ L6PROP(GUITARPORT, "GuitarPort", "GuitarPort", PCM),
+ L6PROP(POCKETPOD, "PocketPOD", "Pocket POD", CONTROL),
+ L6PROP(PODHD300, "PODHD300", "POD HD300", CTRL_PCM_HW),
+ L6PROP(PODHD400, "PODHD400", "POD HD400", CTRL_PCM_HW),
+ L6PROP(PODHD500, "PODHD500", "POD HD500", CTRL_PCM_HW),
+ L6PROP(PODSTUDIO_GX, "PODStudioGX", "POD Studio GX", PCM),
+ L6PROP(PODSTUDIO_UX1, "PODStudioUX1", "POD Studio UX1", PCM),
+ L6PROP(PODSTUDIO_UX2, "PODStudioUX2", "POD Studio UX2", PCM),
+ L6PROP(PODX3, "PODX3", "POD X3", PCM),
+ L6PROP(PODX3LIVE, "PODX3Live", "POD X3 Live", PCM),
+ L6PROP(PODXT, "PODxt", "PODxt", CTRL_PCM_HW),
+ L6PROP(PODXTLIVE, "PODxtLive", "PODxt Live", CTRL_PCM_HW),
+ L6PROP(PODXTPRO, "PODxtPro", "PODxt Pro", CTRL_PCM_HW),
+ L6PROP(TONEPORT_GX, "TonePortGX", "TonePort GX", PCM),
+ L6PROP(TONEPORT_UX1, "TonePortUX1", "TonePort UX1", PCM),
+ L6PROP(TONEPORT_UX2, "TonePortUX2", "TonePort UX2", PCM),
+ L6PROP(VARIAX, "Variax", "Variax Workbench", CONTROL),
};
/* *INDENT-ON* */
@@ -152,10 +156,10 @@ int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
int retval;
retval = usb_interrupt_msg(line6->usbdev,
- usb_sndintpipe(line6->usbdev,
- line6->ep_control_write),
- (char *)frag_buf, frag_size,
- &partial, LINE6_TIMEOUT * HZ);
+ usb_sndintpipe(line6->usbdev,
+ line6->ep_control_write),
+ (char *)frag_buf, frag_size,
+ &partial, LINE6_TIMEOUT * HZ);
if (retval) {
dev_err(line6->ifcdev,
diff --git a/drivers/staging/line6/usbdefs.h b/drivers/staging/line6/usbdefs.h
index eda0456..2d1cc47 100644
--- a/drivers/staging/line6/usbdefs.h
+++ b/drivers/staging/line6/usbdefs.h
@@ -106,7 +106,7 @@ enum {
/* device support hardware monitoring */
#define LINE6_BIT_HWMON (1 << 2)
-#define LINE6_BIT_CONTROL_PCM_HWMON (LINE6_BIT_CONTROL | \
+#define LINE6_BIT_CTRL_PCM_HW (LINE6_BIT_CONTROL | \
LINE6_BIT_PCM | \
LINE6_BIT_HWMON)
next prev parent reply other threads:[~2014-03-17 2:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-16 12:20 [PATCH] fixing some coding style issues on line6 driver.c Davide Berardi
2014-03-16 16:37 ` Greg KH
2014-03-16 16:55 ` Joe Perches
2014-03-17 2:34 ` Davide Berardi [this message]
2014-03-17 19:08 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140317033441.125d2212@White-Rabbit \
--to=berardi.dav@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.