From: Dan Carpenter <dan.carpenter@oracle.com>
To: Karsten Keil <isdn@linux-pingi.de>
Cc: "David S. Miller" <davem@davemloft.net>,
"YOSHIFUJI Hideaki / 吉藤英明" <yoshfuji@linux-ipv6.org>,
netdev@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: [patch] isdnloop: several buffer overflows
Date: Tue, 08 Apr 2014 09:23:09 +0000 [thread overview]
Message-ID: <20140408092309.GA26450@mwanda> (raw)
There are three buffer overflows addressed in this patch.
1) In isdnloop_fake_err() we add an 'E' to a 60 character string and
then copy it into a 60 character buffer. I have made the destination
buffer 64 characters and I'm changed the sprintf() to a snprintf().
2) In isdnloop_parse_cmd(), p points to a 6 characters into a 60
character buffer so we have 54 characters. The ->eazlist[] is 11
characters long. I have modified the code to return if the source
buffer is too long.
3) In isdnloop_command() the cbuf[] array was 60 characters long but the
max length of the string then can be up to 79 characters. I made the
cbuf array 80 characters long and changed the sprintf() to snprintf().
I also removed the temporary "dial" buffer and changed it to use "p"
directly.
Unfortunately, we pass the "cbuf" string from isdnloop_command() to
isdnloop_writecmd() which truncates anything over 60 characters to make
it fit in card->omsg[]. (It can accept values up to 255 characters so
long as there is a '\n' character every 60 characters). For now I have
just fixed the memory corruption bug and left the other problems in this
driver alone.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c
index e1f8748..5a4da94 100644
--- a/drivers/isdn/isdnloop/isdnloop.c
+++ b/drivers/isdn/isdnloop/isdnloop.c
@@ -518,9 +518,9 @@ static isdnloop_stat isdnloop_cmd_table[] static void
isdnloop_fake_err(isdnloop_card *card)
{
- char buf[60];
+ char buf[64];
- sprintf(buf, "E%s", card->omsg);
+ snprintf(buf, sizeof(buf), "E%s", card->omsg);
isdnloop_fake(card, buf, -1);
isdnloop_fake(card, "NAK", -1);
}
@@ -903,6 +903,8 @@ isdnloop_parse_cmd(isdnloop_card *card)
case 7:
/* 0x;EAZ */
p += 3;
+ if (strlen(p) >= sizeof(card->eazlist[0]))
+ break;
strcpy(card->eazlist[ch - 1], p);
break;
case 8:
@@ -1133,7 +1135,7 @@ isdnloop_command(isdn_ctrl *c, isdnloop_card *card)
{
ulong a;
int i;
- char cbuf[60];
+ char cbuf[80];
isdn_ctrl cmd;
isdnloop_cdef cdef;
@@ -1198,7 +1200,6 @@ isdnloop_command(isdn_ctrl *c, isdnloop_card *card)
break;
if ((c->arg & 255) < ISDNLOOP_BCH) {
char *p;
- char dial[50];
char dcode[4];
a = c->arg;
@@ -1210,10 +1211,10 @@ isdnloop_command(isdn_ctrl *c, isdnloop_card *card)
} else
/* Normal Dial */
strcpy(dcode, "CAL");
- strcpy(dial, p);
- sprintf(cbuf, "%02d;D%s_R%s,%02d,%02d,%s\n", (int) (a + 1),
- dcode, dial, c->parm.setup.si1,
- c->parm.setup.si2, c->parm.setup.eazmsn);
+ snprintf(cbuf, sizeof(cbuf),
+ "%02d;D%s_R%s,%02d,%02d,%s\n", (int) (a + 1),
+ dcode, p, c->parm.setup.si1,
+ c->parm.setup.si2, c->parm.setup.eazmsn);
i = isdnloop_writecmd(cbuf, strlen(cbuf), 0, card);
}
break;
WARNING: multiple messages have this Message-ID (diff)
From: Dan Carpenter <dan.carpenter@oracle.com>
To: Karsten Keil <isdn@linux-pingi.de>
Cc: "David S. Miller" <davem@davemloft.net>,
"YOSHIFUJI Hideaki / 吉藤英明" <yoshfuji@linux-ipv6.org>,
netdev@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: [patch] isdnloop: several buffer overflows
Date: Tue, 8 Apr 2014 12:23:09 +0300 [thread overview]
Message-ID: <20140408092309.GA26450@mwanda> (raw)
There are three buffer overflows addressed in this patch.
1) In isdnloop_fake_err() we add an 'E' to a 60 character string and
then copy it into a 60 character buffer. I have made the destination
buffer 64 characters and I'm changed the sprintf() to a snprintf().
2) In isdnloop_parse_cmd(), p points to a 6 characters into a 60
character buffer so we have 54 characters. The ->eazlist[] is 11
characters long. I have modified the code to return if the source
buffer is too long.
3) In isdnloop_command() the cbuf[] array was 60 characters long but the
max length of the string then can be up to 79 characters. I made the
cbuf array 80 characters long and changed the sprintf() to snprintf().
I also removed the temporary "dial" buffer and changed it to use "p"
directly.
Unfortunately, we pass the "cbuf" string from isdnloop_command() to
isdnloop_writecmd() which truncates anything over 60 characters to make
it fit in card->omsg[]. (It can accept values up to 255 characters so
long as there is a '\n' character every 60 characters). For now I have
just fixed the memory corruption bug and left the other problems in this
driver alone.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c
index e1f8748..5a4da94 100644
--- a/drivers/isdn/isdnloop/isdnloop.c
+++ b/drivers/isdn/isdnloop/isdnloop.c
@@ -518,9 +518,9 @@ static isdnloop_stat isdnloop_cmd_table[] =
static void
isdnloop_fake_err(isdnloop_card *card)
{
- char buf[60];
+ char buf[64];
- sprintf(buf, "E%s", card->omsg);
+ snprintf(buf, sizeof(buf), "E%s", card->omsg);
isdnloop_fake(card, buf, -1);
isdnloop_fake(card, "NAK", -1);
}
@@ -903,6 +903,8 @@ isdnloop_parse_cmd(isdnloop_card *card)
case 7:
/* 0x;EAZ */
p += 3;
+ if (strlen(p) >= sizeof(card->eazlist[0]))
+ break;
strcpy(card->eazlist[ch - 1], p);
break;
case 8:
@@ -1133,7 +1135,7 @@ isdnloop_command(isdn_ctrl *c, isdnloop_card *card)
{
ulong a;
int i;
- char cbuf[60];
+ char cbuf[80];
isdn_ctrl cmd;
isdnloop_cdef cdef;
@@ -1198,7 +1200,6 @@ isdnloop_command(isdn_ctrl *c, isdnloop_card *card)
break;
if ((c->arg & 255) < ISDNLOOP_BCH) {
char *p;
- char dial[50];
char dcode[4];
a = c->arg;
@@ -1210,10 +1211,10 @@ isdnloop_command(isdn_ctrl *c, isdnloop_card *card)
} else
/* Normal Dial */
strcpy(dcode, "CAL");
- strcpy(dial, p);
- sprintf(cbuf, "%02d;D%s_R%s,%02d,%02d,%s\n", (int) (a + 1),
- dcode, dial, c->parm.setup.si1,
- c->parm.setup.si2, c->parm.setup.eazmsn);
+ snprintf(cbuf, sizeof(cbuf),
+ "%02d;D%s_R%s,%02d,%02d,%s\n", (int) (a + 1),
+ dcode, p, c->parm.setup.si1,
+ c->parm.setup.si2, c->parm.setup.eazmsn);
i = isdnloop_writecmd(cbuf, strlen(cbuf), 0, card);
}
break;
next reply other threads:[~2014-04-08 9:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-08 9:23 Dan Carpenter [this message]
2014-04-08 9:23 ` [patch] isdnloop: several buffer overflows Dan Carpenter
2014-04-08 9:34 ` David Laight
2014-04-08 9:34 ` David Laight
2014-04-08 11:02 ` Dan Carpenter
2014-04-08 11:02 ` Dan Carpenter
2014-04-08 16:42 ` David Miller
2014-04-08 16:42 ` David Miller
2014-04-10 11:16 ` Tilman Schmidt
2014-04-10 11:16 ` Tilman Schmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140408092309.GA26450@mwanda \
--to=dan.carpenter@oracle.com \
--cc=davem@davemloft.net \
--cc=isdn@linux-pingi.de \
--cc=kernel-janitors@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=yoshfuji@linux-ipv6.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.