All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Dmitry Fleytman <dmitry@daynix.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>,
	qemu-devel@nongnu.org, mdroth@linux.vnet.ibm.com,
	qemu-stable@nongnu.org, Stefan Hajnoczi <stefanha@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Subject: Re: [Qemu-devel] [PATCH V2 1/4] vmxnet3: validate interrupt indices coming from guest
Date: Fri, 11 Apr 2014 15:05:59 +0100	[thread overview]
Message-ID: <20140411140559.GI2430@work-vm> (raw)
In-Reply-To: <1396604722-11902-2-git-send-email-dmitry@daynix.com>

* Dmitry Fleytman (dmitry@daynix.com) wrote:
> CVE-2013-4544
> 
> Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
> Reported-by: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

> ---
>  hw/net/vmxnet3.c | 36 ++++++++++++++++++++++++++++++++++--
>  1 file changed, 34 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/net/vmxnet3.c b/hw/net/vmxnet3.c
> index 5be807c..0b317f8 100644
> --- a/hw/net/vmxnet3.c
> +++ b/hw/net/vmxnet3.c
> @@ -52,6 +52,9 @@
>  #define VMXNET3_DEVICE_VERSION    0x1
>  #define VMXNET3_DEVICE_REVISION   0x1
>  
> +/* Number of interrupt vectors for non-MSIx modes */
> +#define VMXNET3_MAX_NMSIX_INTRS   (1)
> +
>  /* Macros for rings descriptors access */
>  #define VMXNET3_READ_TX_QUEUE_DESCR8(dpa, field) \
>      (vmw_shmem_ld8(dpa + offsetof(struct Vmxnet3_TxQueueDesc, field)))
> @@ -1305,6 +1308,34 @@ static bool vmxnet3_verify_intx(VMXNET3State *s, int intx)
>             (pci_get_byte(s->parent_obj.config + PCI_INTERRUPT_PIN) - 1));
>  }
>  
> +static void vmxnet3_validate_interrupt_idx(bool is_msix, int idx)
> +{
> +    int max_ints = is_msix ? VMXNET3_MAX_INTRS : VMXNET3_MAX_NMSIX_INTRS;
> +    if (idx >= max_ints) {
> +        hw_error("Bad interrupt index: %d\n", idx);
> +    }
> +}
> +
> +static void vmxnet3_validate_interrupts(VMXNET3State *s)
> +{
> +    int i;
> +
> +    VMW_CFPRN("Verifying event interrupt index (%d)", s->event_int_idx);
> +    vmxnet3_validate_interrupt_idx(s->msix_used, s->event_int_idx);
> +
> +    for (i = 0; i < s->txq_num; i++) {
> +        int idx = s->txq_descr[i].intr_idx;
> +        VMW_CFPRN("Verifying TX queue %d interrupt index (%d)", i, idx);
> +        vmxnet3_validate_interrupt_idx(s->msix_used, idx);
> +    }
> +
> +    for (i = 0; i < s->rxq_num; i++) {
> +        int idx = s->rxq_descr[i].intr_idx;
> +        VMW_CFPRN("Verifying RX queue %d interrupt index (%d)", i, idx);
> +        vmxnet3_validate_interrupt_idx(s->msix_used, idx);
> +    }
> +}
> +
>  static void vmxnet3_activate_device(VMXNET3State *s)
>  {
>      int i;
> @@ -1447,6 +1478,8 @@ static void vmxnet3_activate_device(VMXNET3State *s)
>                 sizeof(s->rxq_descr[i].rxq_stats));
>      }
>  
> +    vmxnet3_validate_interrupts(s);
> +
>      /* Make sure everything is in place before device activation */
>      smp_wmb();
>  
> @@ -2005,7 +2038,6 @@ vmxnet3_cleanup_msix(VMXNET3State *s)
>      }
>  }
>  
> -#define VMXNET3_MSI_NUM_VECTORS   (1)
>  #define VMXNET3_MSI_OFFSET        (0x50)
>  #define VMXNET3_USE_64BIT         (true)
>  #define VMXNET3_PER_VECTOR_MASK   (false)
> @@ -2016,7 +2048,7 @@ vmxnet3_init_msi(VMXNET3State *s)
>      PCIDevice *d = PCI_DEVICE(s);
>      int res;
>  
> -    res = msi_init(d, VMXNET3_MSI_OFFSET, VMXNET3_MSI_NUM_VECTORS,
> +    res = msi_init(d, VMXNET3_MSI_OFFSET, VMXNET3_MAX_NMSIX_INTRS,
>                     VMXNET3_USE_64BIT, VMXNET3_PER_VECTOR_MASK);
>      if (0 > res) {
>          VMW_WRPRN("Failed to initialize MSI, error %d", res);
> -- 
> 1.8.5.3
> 
> 
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK

  reply	other threads:[~2014-04-11 14:06 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-04  9:45 [Qemu-devel] [PATCH V2 0/4] CVE-2013-4544 Dmitry Fleytman
2014-04-04  9:45 ` [Qemu-devel] [PATCH V2 1/4] vmxnet3: validate interrupt indices coming from guest Dmitry Fleytman
2014-04-11 14:05   ` Dr. David Alan Gilbert [this message]
2014-04-04  9:45 ` [Qemu-devel] [PATCH V2 2/4] vmxnet3: validate queues configuration coming from quest Dmitry Fleytman
2014-04-11 14:10   ` Dr. David Alan Gilbert
2014-04-04  9:45 ` [Qemu-devel] [PATCH V2 3/4] vmxnet3: validate interrupt indices read on migration Dmitry Fleytman
2014-04-11 14:21   ` Dr. David Alan Gilbert
2014-04-04  9:45 ` [Qemu-devel] [PATCH V2 4/4] vmxnet3: validate queues configuration " Dmitry Fleytman
2014-04-11 14:23   ` Dr. David Alan Gilbert
2014-04-11 14:26 ` [Qemu-devel] [PATCH V2 0/4] CVE-2013-4544 Dr. David Alan Gilbert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140411140559.GI2430@work-vm \
    --to=dgilbert@redhat.com \
    --cc=dmitry@daynix.com \
    --cc=mdroth@linux.vnet.ibm.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-stable@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.