Re: [PATCH] mtd: spi-nor: read 6 bytes for the ID

[Marek Vasut <marex@denx.de>]

On Monday, April 14, 2014 at 12:09:34 PM, Huang Shijie wrote:

[...]

> @@ -505,6 +505,7 @@ const struct spi_device_id spi_nor_ids[] = {
>  	{ "s70fl01gs",  INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
>  	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
>  	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
> +	{ "s25fl128s",	INFO(0x012018, 0x4d0180, 64 * 1024, 256,
> SPI_NOR_QUAD_READ) }, { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 
> 64, 0) },

Support for new hardware should go in separatelly.

>  	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256, 0) },
>  	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
> @@ -593,12 +594,13 @@ EXPORT_SYMBOL_GPL(spi_nor_ids);
>  static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
>  {
>  	int			tmp;
> -	u8			id[5];
> +	u8			id[6];
>  	u32			jedec;
> -	u16                     ext_jedec;
> +	u32                     ext_jedec;
>  	struct flash_info	*info;
> +	int			matched = -1;
> 
> -	tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, 5);
> +	tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, 6);
>  	if (tmp < 0) {
>  		dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp);
>  		return ERR_PTR(tmp);
> @@ -614,8 +616,23 @@ static const struct spi_device_id
> *spi_nor_read_id(struct spi_nor *nor) for (tmp = 0; tmp <
> ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
>  		info = (void *)spi_nor_ids[tmp].driver_data;
>  		if (info->jedec_id == jedec) {
> -			if (info->ext_id == 0 || info->ext_id == ext_jedec)
> +			if (info->ext_id == 0)
>  				return &spi_nor_ids[tmp];
> +
> +			/* the legacy two bytes ext_id */
> +			if ((info->ext_id >> 16) == 0) {
> +				if (info->ext_id == ext_jedec)
> +					matched = tmp;
> +			} else {
> +				/* check the sixth byte now */
> +				ext_jedec = ext_jedec << 8 | id[5];
> +				if (info->ext_id == ext_jedec)
> +					return &spi_nor_ids[tmp];
> +			}
> +		} else {
> +			/* shortcut */
> +			if (matched != -1)
> +				return &spi_nor_ids[matched];

I wonder if the ID-bytes wraparound cannot cause us trouble here. For example if 
we try to detect a SPI NOR which has 5-byte ID code, but in the table, we'd also 
have a SPI NOR with has a 6-byte code where the last byte of ext-jedec matches 
the first byte of JEDEC ID , this would actually match on the later.

Shall we not add an ID code length field into the table instead ?