Re: [PATCH] mtd: spi-nor: read 6 bytes for the ID

[Marek Vasut <marex@denx.de>]

On Wednesday, May 28, 2014 at 07:22:40 AM, Huang Shijie wrote:
[...]
> From 7b920141899e4e7249bd23792dc8d5f1558cb7ca Mon Sep 17 00:00:00 2001
> From: Huang Shijie <b32955@freescale.com>
> Date: Mon, 14 Apr 2014 18:09:34 +0800
> Subject: [PATCH v2] mtd: spi-nor: read 6 bytes for the ID
> 
> Currently, we read 5 bytes for ID, but s25fl128s has the same
> ext_id(0x4d01) with s25fl129p1. The s25fl128s can support the DDR Quad
> read, while s25fl129p1 does not. So we have to distinguish the two NOR
> flashs.
> 
> This patch reads out 6 bytes for the ID, and use the 6 bytes ID to search
> the right flash_info.
> 
> The detail of the patch is:
>   [1] change the "ext_id" from u16 to u32.
>       We can store two bytes or three bytes with the @ext_id now.
> 
>   [2] search the right flash_info with the 6byte ID and the new @ext_id.
>       We use "matched" variable to track the legacy two bytes @ext_id.
>       If the flash_info's @ext_id is three bytes, we will use the
>       sixth byte of the ID to check it.
> 
>   [3] add the new item to spi_nor_ids for s25fl128s.
> 
> Signed-off-by: Huang Shijie <b32955@freescale.com>
> ---
>  drivers/mtd/spi-nor/spi-nor.c |   30 +++++++++++++++++++++++++-----
>  1 files changed, 25 insertions(+), 5 deletions(-)

What exactly changed here please ?

Best regards,
Marek Vasut