* [oe-layersetup][PATCH 2/5] local-arago-linaro.conf: remove denzil-specific version setting Linaro TC
2014-04-23 19:42 [oe-layersetup][PATCH 0/5] RFC: cleanup and remove denzil configs Denys Dmytriyenko
2014-04-23 19:42 ` [oe-layersetup][PATCH 1/5] bblayers-denzil: remove denzil-specific bblayers file, deprecated Denys Dmytriyenko
@ 2014-04-23 19:42 ` Denys Dmytriyenko
2014-04-23 19:42 ` [oe-layersetup][PATCH 3/5] mcsdk-03.00.00.xx: remove old denzil-based configs Denys Dmytriyenko
` (3 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Denys Dmytriyenko @ 2014-04-23 19:42 UTC (permalink / raw)
To: meta-arago
From: Denys Dmytriyenko <denys@ti.com>
Linaro TC is now set by default by distro from danny onwards.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
---
sample-files/local-arago-linaro.conf.sample | 160 ----------------------------
1 file changed, 160 deletions(-)
delete mode 100644 sample-files/local-arago-linaro.conf.sample
diff --git a/sample-files/local-arago-linaro.conf.sample b/sample-files/local-arago-linaro.conf.sample
deleted file mode 100644
index 24d14dc..0000000
--- a/sample-files/local-arago-linaro.conf.sample
+++ /dev/null
@@ -1,160 +0,0 @@
-# CONF_VERSION is increased each time build/conf/ changes incompatibly
-CONF_VERSION = "1"
-
-#
-# Where to place downloads
-#
-# During a first build the system will download many different source code
-# tarballs from various upstream projects. This can take a while, particularly
-# if your network connection is slow. These are all stored in DL_DIR. When
-# wiping and rebuilding you can preserve this directory to speed up this part
-# of subsequent builds. This directory is safe to share between multiple builds
-# on the same machine too.
-DL_DIR = "${OEBASE}/downloads"
-
-#
-# Where to place shared-state files
-#
-# BitBake has the capability to accelerate builds based on previously built
-# output. This is done using "shared state" files which can be thought of as
-# cache objects and this option determines where those files are placed.
-#
-# You can wipe out TMPDIR leaving this directory intact and the build would
-# regenerate from these files if no changes were made to the configuration.
-# If changes were made to the configuration, only shared state files where the
-# state was still valid would be used (done using checksums).
-SSTATE_DIR = "${OEBASE}/build/sstate-cache"
-
-#
-# Shared-state files from other locations
-#
-# As mentioned above, shared state files are prebuilt cache data objects which
-# can be used to accelerate build time. This variable can be used to configure
-# the system to search other mirror locations for these objects before it
-# builds the data itself.
-#
-# This can be a filesystem directory, or a remote url such as http or ftp.
-# These would contain the sstate-cache results from previous builds (possibly
-# from other machines). This variable works like fetcher MIRRORS/PREMIRRORS
-# and points to the cache locations to check for the shared objects.
-#SSTATE_MIRRORS ?= "\
-#file://.* http://someserver.tld/share/sstate/ \n \
-#file://.* file:///some/local/dir/sstate/"
-
-#
-# Where to place the build output
-#
-# This option specifies where the bulk of the building work should be done and
-# where BitBake should place its temporary files and output. Keep in mind that
-# this includes the extraction and compilation of many applications and the toolchain
-# which can use Gigabytes of hard disk space.
-TMPDIR = "${OEBASE}/build/arago-tmp"
-
-#
-# Machine Selection
-#
-# You need to select a specific machine to target the build with. There are a selection
-# of emulated machines available which can boot and run in the QEMU emulator:
-#
-MACHINE ?= "arago"
-
-#
-# Package Management configuration
-#
-# This variable lists which packaging formats to enable. Multiple package backends
-# can be enabled at once and the first item listed in the variable will be used
-# to generate the root filesystems.
-# Options are:
-# - 'package_deb' for debian style deb files
-# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
-# - 'package_rpm' for rpm style packages
-# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
-# We default to ipk:
-PACKAGE_CLASSES ?= "package_ipk"
-
-#
-# SDK/ADT target architecture
-#
-# This variable specified the architecture to build SDK/ADT items for and means
-# you can build the SDK packages for architectures other than the machine you are
-# running the build on (i.e. building i686 packages on an x86_64 host._
-# Supported values are i686 and x86_64
-SDKMACHINE ?= "i686"
-
-#
-# Extra image configuration defaults
-#
-# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
-# images. Some of these options are added to certain image types automatically. The
-# variable can contain the following options:
-# "dbg-pkgs" - add -dbg packages for all installed packages
-# (adds symbol information for debugging/profiling)
-# "dev-pkgs" - add -dev packages for all installed packages
-# (useful if you want to develop against libs in the image)
-# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
-# "tools-debug" - add debugging tools (gdb, strace)
-# "tools-profile" - add profiling tools (oprofile, exmap, lttng valgrind (x86 only))
-# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
-# "debug-tweaks" - make an image suitable for development
-# e.g. ssh root access has a blank password
-# There are other application targets that can be used here too, see
-# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
-# We default to enabling the debugging tweaks.
-EXTRA_IMAGE_FEATURES = "debug-tweaks"
-
-#
-# Additional image features
-#
-# The following is a list of additional classes to use when building images which
-# enable extra features. Some available options which can be included in this variable
-# are:
-# - 'buildstats' collect build statistics
-# - 'image-mklibs' to reduce shared library files size for an image
-# - 'image-prelink' in order to prelink the filesystem image
-# - 'image-swab' to perform host system intrusion detection
-# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
-# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
-USER_CLASSES ?= "buildstats image-mklibs image-prelink"
-
-# By default disable interactive patch resolution (tasks will just fail instead):
-PATCHRESOLVE = "noop"
-
-# Qemu 0.12.x is giving too much problems recently (2010.05), so disable it for users
-ENABLE_BINARY_LOCALE_GENERATION = "0"
-
-# By default the machine configuration file sets the IMAGE_FSTYPES. But if you
-# would like to add additional file system types you can uncomment the
-# following line and add the additional IMAGE_FSTYPES you want created
-# as part of the build flow. Some common types are listed below and you
-# can remove the ones you do not want.
-# IMAGE_FSTYPES += "jffs2 cramfs ext2.gz ext3.gz squashfs ubi tar.gz tar.bz2 cpio"
-
-#
-# Parallelism Options
-#
-# These two options control how much parallelism BitBake should use. The first
-# option determines how many tasks bitbake should run in parallel:
-#
-BB_NUMBER_THREADS = "1"
-#
-# The second option controls how many processes make should run in parallel when
-# running compile tasks:
-#
-PARALLEL_MAKE = "-j 1"
-#
-# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
-# be appropriate for example
-
-DISTRO = "arago"
-TOOLCHAIN_BRAND = "linaro"
-
-# Set terminal types by default it expects gnome-terminal
-# but we chose xterm
-TERMCMD = "${XTERM_TERMCMD}"
-TERMCMDRUN = "${XTERM_TERMCMDRUN}"
-
-# Don't generate the mirror tarball for SCM repos, the snapshot is enough
-BB_GENERATE_MIRROR_TARBALLS = "0"
-
-# Uncomment this to remove work directory after packaging to save disk space
-#INHERIT += "rm_work"
--
1.9.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* [oe-layersetup][PATCH 3/5] mcsdk-03.00.00.xx: remove old denzil-based configs
2014-04-23 19:42 [oe-layersetup][PATCH 0/5] RFC: cleanup and remove denzil configs Denys Dmytriyenko
2014-04-23 19:42 ` [oe-layersetup][PATCH 1/5] bblayers-denzil: remove denzil-specific bblayers file, deprecated Denys Dmytriyenko
2014-04-23 19:42 ` [oe-layersetup][PATCH 2/5] local-arago-linaro.conf: remove denzil-specific version setting Linaro TC Denys Dmytriyenko
@ 2014-04-23 19:42 ` Denys Dmytriyenko
2014-04-23 19:42 ` [oe-layersetup][PATCH 4/5] arago-denzil-config: remove denzil-specific config Denys Dmytriyenko
` (2 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Denys Dmytriyenko @ 2014-04-23 19:42 UTC (permalink / raw)
To: meta-arago
From: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
---
configs/mcsdk/mcsdk-03.00.00.03-config.txt | 10 ----------
configs/mcsdk/mcsdk-03.00.00.05-config.txt | 11 -----------
configs/mcsdk/mcsdk-03.00.00.06-config.txt | 11 -----------
configs/mcsdk/mcsdk-03.00.00.07-config.txt | 11 -----------
4 files changed, 43 deletions(-)
delete mode 100644 configs/mcsdk/mcsdk-03.00.00.03-config.txt
delete mode 100644 configs/mcsdk/mcsdk-03.00.00.05-config.txt
delete mode 100644 configs/mcsdk/mcsdk-03.00.00.06-config.txt
delete mode 100644 configs/mcsdk/mcsdk-03.00.00.07-config.txt
diff --git a/configs/mcsdk/mcsdk-03.00.00.03-config.txt b/configs/mcsdk/mcsdk-03.00.00.03-config.txt
deleted file mode 100644
index 9afaf0e..0000000
--- a/configs/mcsdk/mcsdk-03.00.00.03-config.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-# This file takes repo entries in the format
-# repo name,repo uri,repo branch,repo commit[,layers=layer1:layer2...:layern]
-
-bitbake,git://git.openembedded.org/bitbake,master,1.15.2,layers=
-meta-arago,git://arago-project.org/git/meta-arago.git,master,2012.07,layers=meta-arago-distro:meta-arago-extras
-meta-ti,git://arago-project.org/git/meta-ti.git,denzil,f95b2e51ea8194b82d2476b338610782a83ce4de,layers=
-meta-linaro,git://git.linaro.org/openembedded/meta-linaro.git,denzil,03bceadf7d9f70d7b013f453e81b2b9d1b7cdbc7,layers=
-oe-core,git://git.openembedded.org/openembedded-core,denzil,741146fa90f28f7ce8d82ee7f7e254872d519724,layers=meta
-OECORELAYERCONF=./sample-files/bblayers-denzil.conf.sample
-OECORELOCALCONF=./sample-files/local-arago.conf.sample
diff --git a/configs/mcsdk/mcsdk-03.00.00.05-config.txt b/configs/mcsdk/mcsdk-03.00.00.05-config.txt
deleted file mode 100644
index 9fba566..0000000
--- a/configs/mcsdk/mcsdk-03.00.00.05-config.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-# This file takes repo entries in the format
-# repo name,repo uri,repo branch,repo commit[,layers=layer1:layer2...:layern]
-
-bitbake,git://git.openembedded.org/bitbake,master,1.15.2,layers=
-meta-arago,git://arago-project.org/git/meta-arago.git,master,2012.11,layers=meta-arago-distro:meta-arago-extras
-meta-openembedded,git://git.openembedded.org/meta-openembedded,denzil,e77646bc2cf905fd671fc5c19ab6fd17f9b94b3f,layers=toolchain-layer:meta-oe
-meta-ti,git://arago-project.org/git/meta-ti.git,denzil,973138efa050a37462c5fbf0f8eeb5cfbdac478f,layers=
-meta-linaro,git://git.linaro.org/openembedded/meta-linaro.git,denzil,03bceadf7d9f70d7b013f453e81b2b9d1b7cdbc7,layers=
-oe-core,git://git.openembedded.org/openembedded-core,denzil,c15fae372cf75403facc28cf76f973b1279425dd,layers=meta
-OECORELAYERCONF=./sample-files/bblayers-denzil.conf.sample
-OECORELOCALCONF=./sample-files/local-arago-linaro.conf.sample
diff --git a/configs/mcsdk/mcsdk-03.00.00.06-config.txt b/configs/mcsdk/mcsdk-03.00.00.06-config.txt
deleted file mode 100644
index 624dd53..0000000
--- a/configs/mcsdk/mcsdk-03.00.00.06-config.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-# This file takes repo entries in the format
-# repo name,repo uri,repo branch,repo commit[,layers=layer1:layer2...:layern]
-
-bitbake,git://git.openembedded.org/bitbake,master,1.15.2,layers=
-meta-arago,git://arago-project.org/git/meta-arago.git,master,4385d5306b0dcabb64f81759f090468a12c66fcf,layers=meta-arago-distro:meta-arago-extras
-meta-openembedded,git://git.openembedded.org/meta-openembedded,denzil,c0117f5ad7d1fe18d149bda426c7134ff24daae8,layers=toolchain-layer:meta-oe
-meta-ti,git://arago-project.org/git/meta-ti.git,denzil,f4cc35d3ac44a29d3001a295a99f39ecf19fc9ca,layers=
-meta-linaro,git://git.linaro.org/openembedded/meta-linaro.git,denzil,03bceadf7d9f70d7b013f453e81b2b9d1b7cdbc7,layers=
-oe-core,git://git.openembedded.org/openembedded-core,denzil,0a9e8bf35afd5990c1b586bba5eb68f643458a4b,layers=meta
-OECORELAYERCONF=./sample-files/bblayers-denzil.conf.sample
-OECORELOCALCONF=./sample-files/local-arago-linaro.conf.sample
diff --git a/configs/mcsdk/mcsdk-03.00.00.07-config.txt b/configs/mcsdk/mcsdk-03.00.00.07-config.txt
deleted file mode 100644
index 29ade94..0000000
--- a/configs/mcsdk/mcsdk-03.00.00.07-config.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-# This file takes repo entries in the format
-# repo name,repo uri,repo branch,repo commit[,layers=layer1:layer2...:layern]
-
-bitbake,git://git.openembedded.org/bitbake,master,1.15.2,layers=
-meta-arago,git://arago-project.org/git/meta-arago.git,master,127b0541e6f2007de0b402233893363b11e5c4c7,layers=meta-arago-distro:meta-arago-extras
-meta-openembedded,git://git.openembedded.org/meta-openembedded,denzil,c0117f5ad7d1fe18d149bda426c7134ff24daae8,layers=toolchain-layer:meta-oe
-meta-ti,git://arago-project.org/git/meta-ti.git,denzil,2ef919df5cfb48755456251836d80083abc7dce7,layers=
-meta-linaro,git://git.linaro.org/openembedded/meta-linaro.git,denzil,03bceadf7d9f70d7b013f453e81b2b9d1b7cdbc7,layers=
-oe-core,git://git.openembedded.org/openembedded-core,denzil,0a9e8bf35afd5990c1b586bba5eb68f643458a4b,layers=meta
-OECORELAYERCONF=./sample-files/bblayers-denzil.conf.sample
-OECORELOCALCONF=./sample-files/local-arago-linaro.conf.sample
--
1.9.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* [oe-layersetup][PATCH 4/5] arago-denzil-config: remove denzil-specific config
2014-04-23 19:42 [oe-layersetup][PATCH 0/5] RFC: cleanup and remove denzil configs Denys Dmytriyenko
` (2 preceding siblings ...)
2014-04-23 19:42 ` [oe-layersetup][PATCH 3/5] mcsdk-03.00.00.xx: remove old denzil-based configs Denys Dmytriyenko
@ 2014-04-23 19:42 ` Denys Dmytriyenko
2014-04-23 19:42 ` [oe-layersetup][PATCH 5/5] amsdk-05.06.00.00: " Denys Dmytriyenko
2014-04-23 20:30 ` [oe-layersetup][PATCH 0/5] RFC: cleanup and remove denzil configs Cooper Jr., Franklin
5 siblings, 0 replies; 8+ messages in thread
From: Denys Dmytriyenko @ 2014-04-23 19:42 UTC (permalink / raw)
To: meta-arago
From: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
---
configs/arago-denzil-config.txt | 11 -----------
1 file changed, 11 deletions(-)
delete mode 100644 configs/arago-denzil-config.txt
diff --git a/configs/arago-denzil-config.txt b/configs/arago-denzil-config.txt
deleted file mode 100644
index 6a627c4..0000000
--- a/configs/arago-denzil-config.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-# This file takes repo entries in the format
-# repo name,repo uri,repo branch,repo commit[,layers=layer1:layer2...:layern]
-
-bitbake,git://git.openembedded.org/bitbake,master,1.15.2,layers=
-meta-arago,git://arago-project.org/git/meta-arago.git,denzil,HEAD,layers=meta-arago-distro:meta-arago-extras
-meta-openembedded,git://git.openembedded.org/meta-openembedded,denzil,HEAD,layers=toolchain-layer:meta-oe
-meta-ti,git://arago-project.org/git/meta-ti.git,denzil,HEAD,layers=
-meta-linaro,git://git.linaro.org/openembedded/meta-linaro.git,denzil,HEAD,layers=
-oe-core,git://git.openembedded.org/openembedded-core,denzil,HEAD,layers=meta
-OECORELAYERCONF=./sample-files/bblayers-denzil.conf.sample
-OECORELOCALCONF=./sample-files/local-arago.conf.sample
--
1.9.2
^ permalink raw reply related [flat|nested] 8+ messages in thread