Re: [PATCH v7 1/2] serial: sc16is7xx

[Greg KH <gregkh@linuxfoundation.org>]

On Thu, Apr 24, 2014 at 08:56:06PM -0400, jon@ringle.org wrote:
> From: Jon Ringle <jringle@gridpoint.com>
> 
> The SC16IS7xx is a slave I2C-bus/SPI interface to a single-channel
> high performance UART. The SC16IS7xx's internal register set is
> backward-compatible with the widely used and widely popular 16C450.
> 
> The SC16IS7xx also provides additional advanced features such as
> auto hardware and software flow control, automatic RS-485 support, and
> software reset.
> 
> Signed-off-by: Jon Ringle <jringle@gridpoint.com>
> ---
>  drivers/tty/serial/Kconfig       |    9 +
>  drivers/tty/serial/Makefile      |    1 +
>  drivers/tty/serial/sc16is7xx.c   | 1279 ++++++++++++++++++++++++++++++++++++++
>  include/uapi/linux/serial_core.h |    3 +
>  4 files changed, 1292 insertions(+)
>  create mode 100644 drivers/tty/serial/sc16is7xx.c

I get a few build warnings with this patch applied:

drivers/tty/serial/sc16is7xx.c:1059:12: warning: ‘sc16is7xx_probe’ defined but not used [-Wunused-function]
 static int sc16is7xx_probe(struct device *dev,
            ^
drivers/tty/serial/sc16is7xx.c:1175:12: warning: ‘sc16is7xx_remove’ defined but not used [-Wunused-function]
 static int sc16is7xx_remove(struct device *dev)
            ^
drivers/tty/serial/sc16is7xx.c:1214:29: warning: ‘regcfg’ defined but not used [-Wunused-variable]
 static struct regmap_config regcfg = {
                             ^

Can you send a follow-on patch to fix them?

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html