* [PATCH 1/2] ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio
@ 2014-05-07 18:09 Lucas Stach
2014-05-07 18:09 ` [PATCH 2/2] ARM: dts: imx6: edmqmx6: add SPI bus and flash Lucas Stach
2014-05-08 3:43 ` [PATCH 1/2] ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Lucas Stach @ 2014-05-07 18:09 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index e4ae38fd0269..be5de70fe86a 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -105,7 +105,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2
&pinctrl_stmpe1
- &pinctrl_stmpe2>;
+ &pinctrl_stmpe2
+ &pinctrl_pfuze>;
status = "okay";
pmic: pfuze100 at 08 {
@@ -291,6 +292,12 @@
>;
};
+ pinctrl_pfuze: pfuze100grp1 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000
+ >;
+ };
+
pinctrl_stmpe1: stmpe1grp {
fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
};
--
2.0.0.rc0
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH 2/2] ARM: dts: imx6: edmqmx6: add SPI bus and flash
2014-05-07 18:09 [PATCH 1/2] ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio Lucas Stach
@ 2014-05-07 18:09 ` Lucas Stach
2014-05-08 3:43 ` [PATCH 1/2] ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Lucas Stach @ 2014-05-07 18:09 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index be5de70fe86a..58791d0eaaf8 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -91,6 +91,20 @@
};
};
+&ecspi5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi5>;
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio1 12 0>;
+ status = "okay";
+
+ flash: m25p80 at 0 {
+ compatible = "m25p80";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
@@ -264,6 +278,15 @@
>;
};
+ pinctrl_ecspi5: ecspi5rp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000
+ MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000
+ MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000
+ MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000
+ >;
+ };
+
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
--
2.0.0.rc0
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH 1/2] ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio
2014-05-07 18:09 [PATCH 1/2] ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio Lucas Stach
2014-05-07 18:09 ` [PATCH 2/2] ARM: dts: imx6: edmqmx6: add SPI bus and flash Lucas Stach
@ 2014-05-08 3:43 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2014-05-08 3:43 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, May 07, 2014 at 08:09:04PM +0200, Lucas Stach wrote:
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
Applied both.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-05-08 3:43 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-07 18:09 [PATCH 1/2] ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio Lucas Stach
2014-05-07 18:09 ` [PATCH 2/2] ARM: dts: imx6: edmqmx6: add SPI bus and flash Lucas Stach
2014-05-08 3:43 ` [PATCH 1/2] ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.