Re: [PATCH v3 7/7] dts: dra7-evm: add USB support

[Tony Lindgren <tony@atomide.com>]

* Roger Quadros <rogerq@ti.com> [140505 02:55]:
> Add USB pinmux information and USB modes
> for the USB controllers.
> 
> CC: Benoît Cousson <bcousson@baylibre.com>
> Reviewed-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
>  arch/arm/boot/dts/dra7-evm.dts | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index 5babba0..1d77815 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -93,6 +93,18 @@
>  			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
>  		>;
>  	};
> +
> +	usb1_pins: pinmux_usb1_pins {
> +                pinctrl-single,pins = <
> +			0x280	0xc0000	/* usb1_drvvbus, SLOW_SLEW | PULLUPEN | MODE0 */
> +                >;
> +        };
> +
> +	usb2_pins: pinmux_usb2_pins {
> +                pinctrl-single,pins = <
> +			0x284	0xc0000 /* usb2_drvvbus, SLOW_SLEW | PULLUPEN | MODE0 */
> +                >;
> +        };
>  };

Looks like these should use the existing defins PIN_INPUT_SLEW etc?

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html