Re: [PATCH] boot-monitor: add K2L and K2E boot monitor build support

[Denys Dmytriyenko <denys@ti.com>]

On Wed, May 14, 2014 at 02:29:49PM -0400, hzhang@ti.com wrote:
> From: Hao Zhang <hzhang@ti.com>
> 
> ---
>  recipes-bsp/boot-monitor/boot-monitor_git.bb |   18 +++++++++++++-----
>  1 file changed, 13 insertions(+), 5 deletions(-)
> 
> diff --git a/recipes-bsp/boot-monitor/boot-monitor_git.bb b/recipes-bsp/boot-monitor/boot-monitor_git.bb
> index 7c5e9cf..2c3aa43 100644
> --- a/recipes-bsp/boot-monitor/boot-monitor_git.bb
> +++ b/recipes-bsp/boot-monitor/boot-monitor_git.bb
> @@ -3,8 +3,12 @@ EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
>  
>  LICENSE = "BSD"
>  
> -BOOT_MONITOR_BINARY ?= "skern.bin"
> -BOOT_MONITOR_IMAGE  ?= "skern-${MACHINE}.bin"
> +BOOT_MONITOR_BINARY_K2HK ?= "skern-k2hk.bin"
> +BOOT_MONITOR_IMAGE_k2HK  ?= "skern-k2hk-${MACHINE}.bin"
> +BOOT_MONITOR_BINARY_K2L ?= "skern-k2l.bin"
> +BOOT_MONITOR_IMAGE_k2L  ?= "skern-k2l-${MACHINE}.bin"
> +BOOT_MONITOR_BINARY_K2E ?= "skern-k2e.bin"
> +BOOT_MONITOR_IMAGE_k2E  ?= "skern-k2e-${MACHINE}.bin"

Have you tested it? You mix case in the above variables - one has K2HK 
uppercase, another has k2HK lowercase. Same for k2l...


>  BOOT_MONITOR_MAKE_TARGET  ?= "all"
>  
>  LIC_FILES_CHKSUM = "file://COPYING;md5=25fe219a6febf6e5bb45beda1b2eb315"
> @@ -14,7 +18,7 @@ COMPATIBLE_MACHINE = "keystone-evm"
>  SRC_URI = "git://git.ti.com/keystone-linux/boot-monitor.git;protocol=git;branch=${BRANCH}"
>  
>  PV = "2.0"
> -PR = "r0+gitr${SRCPV}"
> +PR = "r1+gitr${SRCPV}"
>  
>  BRANCH = "master"
>  
> @@ -27,7 +31,9 @@ do_compile () {
>  	unset LDFLAGS
>  	unset CFLAGS
>  	unset CPPFLAGS
> -	oe_runmake ${BOOT_MONITOR_MAKE_TARGET}
> +	oe_runmake k2hk
> +	oe_runmake k2l
> +	oe_runmake k2e
>  }
>  
>  inherit deploy
> @@ -36,5 +42,7 @@ addtask deploy before do_build after do_compile
>  
>  do_deploy () {
>  	install -d ${DEPLOYDIR}
> -	install ${S}/${BOOT_MONITOR_BINARY} ${DEPLOYDIR}/${BOOT_MONITOR_IMAGE}
> +	install ${S}/${BOOT_MONITOR_BINARY_K2HK} ${DEPLOYDIR}/${BOOT_MONITOR_IMAGE_K2HK}
> +	install ${S}/${BOOT_MONITOR_BINARY_K2L}	${DEPLOYDIR}/${BOOT_MONITOR_IMAGE_K2L}
> +	install ${S}/${BOOT_MONITOR_BINARY_K2E}	${DEPLOYDIR}/${BOOT_MONITOR_IMAGE_K2E}
>  }
> -- 
> 1.7.9.5
> 
> -- 
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti