All of lore.kernel.org
 help / color / mirror / Atom feed
From: Emil Goode <emilgoode@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2] ARM: imx: fix error handling
Date: Sat, 17 May 2014 15:35:40 +0000	[thread overview]
Message-ID: <20140517153540.GA4309@lianli> (raw)
In-Reply-To: <20140516193139.GQ16662@pengutronix.de>

Hello Uwe,

On Fri, May 16, 2014 at 09:31:39PM +0200, Uwe Kleine-König wrote:
> Hello Walter,
> 
> On Fri, May 16, 2014 at 01:49:10PM +0200, walter harms wrote:
> > Am 16.05.2014 13:16, schrieb Emil Goode:
> > > Hello Walter,
> > > 
> > > On Fri, May 16, 2014 at 12:40:19PM +0200, walter harms wrote:
> > >>
> > >>
> > >> Am 16.05.2014 11:54, schrieb Emil Goode:
> > >>> If we fail to allocate struct platform_device pdev we
> > >>> dereference it after the goto label err.
> > >>>
> > >>> I have rearranged the error handling a bit to fix the issue
> > >>> and also make it more clear.
> > >>>
> > >>> Signed-off-by: Emil Goode <emilgoode@gmail.com>
> > >>> ---
> > >>> v2: Changed to return -ENOMEM instead of ret where possible and
> > >>>     updated the subject line.
> > >>>
> > >>>  arch/arm/mach-imx/devices/platform-ipu-core.c |   22 +++++++++++++---------
> > >>>  1 file changed, 13 insertions(+), 9 deletions(-)
> > >>>
> > >>> diff --git a/arch/arm/mach-imx/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c
> > >>> index fc4dd7c..68f2a4a 100644
> > >>> --- a/arch/arm/mach-imx/devices/platform-ipu-core.c
> > >>> +++ b/arch/arm/mach-imx/devices/platform-ipu-core.c
> > >>> @@ -77,34 +77,38 @@ struct platform_device *__init imx_alloc_mx3_camera(
> > >>>  
> > >>>  	pdev = platform_device_alloc("mx3-camera", 0);
> > >>>  	if (!pdev)
> > >>> -		goto err;
> > >>> +		return ERR_PTR(-ENOMEM);
> > >>>  
> > >>>  	pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
> > >>>  	if (!pdev->dev.dma_mask)
> > >>> -		goto err;
> > >>> +		goto put_pdev;
> > >>>  
> > >>>  	*pdev->dev.dma_mask = DMA_BIT_MASK(32);
> > >>>  	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
> > >>>  
> > >>>  	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
> > >>>  	if (ret)
> > >>> -		goto err;
> > >>> +		goto free_dma_mask;
> > >>>  
> > >>>  	if (pdata) {
> > >>>  		struct mx3_camera_pdata *copied_pdata;
> > >>>  
> > >>>  		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
> > >>> -		if (ret) {
> > >>> -err:
> > >>> -			kfree(pdev->dev.dma_mask);
> > >>> -			platform_device_put(pdev);
> > >>> -			return ERR_PTR(-ENODEV);
> > >>> -		}
> > >>> +		if (ret)
> > >>> +			goto free_dma_mask;
> > >>> +
> > >>>  		copied_pdata = dev_get_platdata(&pdev->dev);
> > >>>  		copied_pdata->dma_dev = &imx_ipu_coredev->dev;
> > >>
> > >>
> > >> the patch is fine, but what use is this copied_pdata ?
> > >> It scope ends next line ?
> > >>
> > >> re,
> > >>  wh
> > > 
> > > I also thought that looked a bit odd, but copied_pdata is a temporary
> > > pointer to platform_data of the dev struct.
> > > 
> > > dev_get_platdata looks like this:
> > > 
> > > static inline void *dev_get_platdata(const struct device *dev)
> > > {
> > >         return dev->platform_data;
> > > }
> > > 
> > > So I believe it's a more compact way of writing:
> > > 
> > > pdev->dev->platform_data->dma_dev = &imx_ipu_coredev->dev;
> It's not about compactness. The dev_get_platdata accessor exists to be
> used instead of directly accessing dev->platform_data. I admit a comment
> would be nice ...
> 
> Anyhow this is all ugly, actually you'd want to have the dma_dev member
> already fixed when calling platform_device_add_data. But you cannot
> simply do
> 
> 	pdata->dma_dev = &imx_ipu_coredev->dev;
> 	ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
> 
> because *pdata is const.

Thank you for the explanation. Regarding the possibility of using
platform_device_register_full() to simplify this function. It seem to
be possible, the following inline function is available to help with this.

imx_add_platform_device_dmamask()

Available here:

arch/arm/mach-imx/devices/devices-common.h

But as you mentioned above we need to allocate a new platform_device
struct before we can assign &imx_ipu_coredev->dev to dma_dev, since
pdata is const. I guess this assignment could be done after calling
imx_add_platform_device_dmamask() but I don't think that makes the
code easier to read.

I think it's best to resend the current patch. (with updated subject line)

Best regards,

Emil Goode



--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: emilgoode@gmail.com (Emil Goode)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ARM: imx: fix error handling
Date: Sat, 17 May 2014 17:35:40 +0200	[thread overview]
Message-ID: <20140517153540.GA4309@lianli> (raw)
In-Reply-To: <20140516193139.GQ16662@pengutronix.de>

Hello Uwe,

On Fri, May 16, 2014 at 09:31:39PM +0200, Uwe Kleine-K?nig wrote:
> Hello Walter,
> 
> On Fri, May 16, 2014 at 01:49:10PM +0200, walter harms wrote:
> > Am 16.05.2014 13:16, schrieb Emil Goode:
> > > Hello Walter,
> > > 
> > > On Fri, May 16, 2014 at 12:40:19PM +0200, walter harms wrote:
> > >>
> > >>
> > >> Am 16.05.2014 11:54, schrieb Emil Goode:
> > >>> If we fail to allocate struct platform_device pdev we
> > >>> dereference it after the goto label err.
> > >>>
> > >>> I have rearranged the error handling a bit to fix the issue
> > >>> and also make it more clear.
> > >>>
> > >>> Signed-off-by: Emil Goode <emilgoode@gmail.com>
> > >>> ---
> > >>> v2: Changed to return -ENOMEM instead of ret where possible and
> > >>>     updated the subject line.
> > >>>
> > >>>  arch/arm/mach-imx/devices/platform-ipu-core.c |   22 +++++++++++++---------
> > >>>  1 file changed, 13 insertions(+), 9 deletions(-)
> > >>>
> > >>> diff --git a/arch/arm/mach-imx/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c
> > >>> index fc4dd7c..68f2a4a 100644
> > >>> --- a/arch/arm/mach-imx/devices/platform-ipu-core.c
> > >>> +++ b/arch/arm/mach-imx/devices/platform-ipu-core.c
> > >>> @@ -77,34 +77,38 @@ struct platform_device *__init imx_alloc_mx3_camera(
> > >>>  
> > >>>  	pdev = platform_device_alloc("mx3-camera", 0);
> > >>>  	if (!pdev)
> > >>> -		goto err;
> > >>> +		return ERR_PTR(-ENOMEM);
> > >>>  
> > >>>  	pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
> > >>>  	if (!pdev->dev.dma_mask)
> > >>> -		goto err;
> > >>> +		goto put_pdev;
> > >>>  
> > >>>  	*pdev->dev.dma_mask = DMA_BIT_MASK(32);
> > >>>  	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
> > >>>  
> > >>>  	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
> > >>>  	if (ret)
> > >>> -		goto err;
> > >>> +		goto free_dma_mask;
> > >>>  
> > >>>  	if (pdata) {
> > >>>  		struct mx3_camera_pdata *copied_pdata;
> > >>>  
> > >>>  		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
> > >>> -		if (ret) {
> > >>> -err:
> > >>> -			kfree(pdev->dev.dma_mask);
> > >>> -			platform_device_put(pdev);
> > >>> -			return ERR_PTR(-ENODEV);
> > >>> -		}
> > >>> +		if (ret)
> > >>> +			goto free_dma_mask;
> > >>> +
> > >>>  		copied_pdata = dev_get_platdata(&pdev->dev);
> > >>>  		copied_pdata->dma_dev = &imx_ipu_coredev->dev;
> > >>
> > >>
> > >> the patch is fine, but what use is this copied_pdata ?
> > >> It scope ends next line ?
> > >>
> > >> re,
> > >>  wh
> > > 
> > > I also thought that looked a bit odd, but copied_pdata is a temporary
> > > pointer to platform_data of the dev struct.
> > > 
> > > dev_get_platdata looks like this:
> > > 
> > > static inline void *dev_get_platdata(const struct device *dev)
> > > {
> > >         return dev->platform_data;
> > > }
> > > 
> > > So I believe it's a more compact way of writing:
> > > 
> > > pdev->dev->platform_data->dma_dev = &imx_ipu_coredev->dev;
> It's not about compactness. The dev_get_platdata accessor exists to be
> used instead of directly accessing dev->platform_data. I admit a comment
> would be nice ...
> 
> Anyhow this is all ugly, actually you'd want to have the dma_dev member
> already fixed when calling platform_device_add_data. But you cannot
> simply do
> 
> 	pdata->dma_dev = &imx_ipu_coredev->dev;
> 	ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
> 
> because *pdata is const.

Thank you for the explanation. Regarding the possibility of using
platform_device_register_full() to simplify this function. It seem to
be possible, the following inline function is available to help with this.

imx_add_platform_device_dmamask()

Available here:

arch/arm/mach-imx/devices/devices-common.h

But as you mentioned above we need to allocate a new platform_device
struct before we can assign &imx_ipu_coredev->dev to dma_dev, since
pdata is const. I guess this assignment could be done after calling
imx_add_platform_device_dmamask() but I don't think that makes the
code easier to read.

I think it's best to resend the current patch. (with updated subject line)

Best regards,

Emil Goode

WARNING: multiple messages have this Message-ID (diff)
From: Emil Goode <emilgoode@gmail.com>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: walter harms <wharms@bfs.de>, Shawn Guo <shawn.guo@freescale.com>,
	Sascha Hauer <kernel@pengutronix.de>,
	Russell King <linux@arm.linux.org.uk>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: Re: [PATCH v2] ARM: imx: fix error handling
Date: Sat, 17 May 2014 17:35:40 +0200	[thread overview]
Message-ID: <20140517153540.GA4309@lianli> (raw)
In-Reply-To: <20140516193139.GQ16662@pengutronix.de>

Hello Uwe,

On Fri, May 16, 2014 at 09:31:39PM +0200, Uwe Kleine-König wrote:
> Hello Walter,
> 
> On Fri, May 16, 2014 at 01:49:10PM +0200, walter harms wrote:
> > Am 16.05.2014 13:16, schrieb Emil Goode:
> > > Hello Walter,
> > > 
> > > On Fri, May 16, 2014 at 12:40:19PM +0200, walter harms wrote:
> > >>
> > >>
> > >> Am 16.05.2014 11:54, schrieb Emil Goode:
> > >>> If we fail to allocate struct platform_device pdev we
> > >>> dereference it after the goto label err.
> > >>>
> > >>> I have rearranged the error handling a bit to fix the issue
> > >>> and also make it more clear.
> > >>>
> > >>> Signed-off-by: Emil Goode <emilgoode@gmail.com>
> > >>> ---
> > >>> v2: Changed to return -ENOMEM instead of ret where possible and
> > >>>     updated the subject line.
> > >>>
> > >>>  arch/arm/mach-imx/devices/platform-ipu-core.c |   22 +++++++++++++---------
> > >>>  1 file changed, 13 insertions(+), 9 deletions(-)
> > >>>
> > >>> diff --git a/arch/arm/mach-imx/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c
> > >>> index fc4dd7c..68f2a4a 100644
> > >>> --- a/arch/arm/mach-imx/devices/platform-ipu-core.c
> > >>> +++ b/arch/arm/mach-imx/devices/platform-ipu-core.c
> > >>> @@ -77,34 +77,38 @@ struct platform_device *__init imx_alloc_mx3_camera(
> > >>>  
> > >>>  	pdev = platform_device_alloc("mx3-camera", 0);
> > >>>  	if (!pdev)
> > >>> -		goto err;
> > >>> +		return ERR_PTR(-ENOMEM);
> > >>>  
> > >>>  	pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
> > >>>  	if (!pdev->dev.dma_mask)
> > >>> -		goto err;
> > >>> +		goto put_pdev;
> > >>>  
> > >>>  	*pdev->dev.dma_mask = DMA_BIT_MASK(32);
> > >>>  	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
> > >>>  
> > >>>  	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
> > >>>  	if (ret)
> > >>> -		goto err;
> > >>> +		goto free_dma_mask;
> > >>>  
> > >>>  	if (pdata) {
> > >>>  		struct mx3_camera_pdata *copied_pdata;
> > >>>  
> > >>>  		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
> > >>> -		if (ret) {
> > >>> -err:
> > >>> -			kfree(pdev->dev.dma_mask);
> > >>> -			platform_device_put(pdev);
> > >>> -			return ERR_PTR(-ENODEV);
> > >>> -		}
> > >>> +		if (ret)
> > >>> +			goto free_dma_mask;
> > >>> +
> > >>>  		copied_pdata = dev_get_platdata(&pdev->dev);
> > >>>  		copied_pdata->dma_dev = &imx_ipu_coredev->dev;
> > >>
> > >>
> > >> the patch is fine, but what use is this copied_pdata ?
> > >> It scope ends next line ?
> > >>
> > >> re,
> > >>  wh
> > > 
> > > I also thought that looked a bit odd, but copied_pdata is a temporary
> > > pointer to platform_data of the dev struct.
> > > 
> > > dev_get_platdata looks like this:
> > > 
> > > static inline void *dev_get_platdata(const struct device *dev)
> > > {
> > >         return dev->platform_data;
> > > }
> > > 
> > > So I believe it's a more compact way of writing:
> > > 
> > > pdev->dev->platform_data->dma_dev = &imx_ipu_coredev->dev;
> It's not about compactness. The dev_get_platdata accessor exists to be
> used instead of directly accessing dev->platform_data. I admit a comment
> would be nice ...
> 
> Anyhow this is all ugly, actually you'd want to have the dma_dev member
> already fixed when calling platform_device_add_data. But you cannot
> simply do
> 
> 	pdata->dma_dev = &imx_ipu_coredev->dev;
> 	ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
> 
> because *pdata is const.

Thank you for the explanation. Regarding the possibility of using
platform_device_register_full() to simplify this function. It seem to
be possible, the following inline function is available to help with this.

imx_add_platform_device_dmamask()

Available here:

arch/arm/mach-imx/devices/devices-common.h

But as you mentioned above we need to allocate a new platform_device
struct before we can assign &imx_ipu_coredev->dev to dma_dev, since
pdata is const. I guess this assignment could be done after calling
imx_add_platform_device_dmamask() but I don't think that makes the
code easier to read.

I think it's best to resend the current patch. (with updated subject line)

Best regards,

Emil Goode




  reply	other threads:[~2014-05-17 15:35 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-16  9:54 [PATCH v2] ARM: imx: fix error handling Emil Goode
2014-05-16  9:54 ` Emil Goode
2014-05-16  9:54 ` Emil Goode
2014-05-16 10:40 ` walter harms
2014-05-16 10:40   ` walter harms
2014-05-16 10:40   ` walter harms
2014-05-16 11:16   ` Emil Goode
2014-05-16 11:16     ` Emil Goode
2014-05-16 11:16     ` Emil Goode
2014-05-16 11:49     ` walter harms
2014-05-16 11:49       ` walter harms
2014-05-16 11:49       ` walter harms
2014-05-16 19:31       ` Uwe Kleine-König
2014-05-16 19:31         ` Uwe Kleine-König
2014-05-16 19:31         ` Uwe Kleine-König
2014-05-17 15:35         ` Emil Goode [this message]
2014-05-17 15:35           ` Emil Goode
2014-05-17 15:35           ` Emil Goode
2014-05-17 19:05           ` Uwe Kleine-König
2014-05-17 19:05             ` Uwe Kleine-König
2014-05-17 19:05             ` Uwe Kleine-König
2014-05-17 22:14             ` Emil Goode
2014-05-17 22:14               ` Emil Goode
2014-05-17 22:14               ` Emil Goode
2014-05-18 14:37             ` Emil Goode
2014-05-18 14:37               ` Emil Goode
2014-05-18 14:37               ` Emil Goode
2014-05-18 15:38             ` Emil Goode
2014-05-18 15:38               ` Emil Goode
2014-05-18 15:38               ` Emil Goode
2014-05-16 19:24 ` Uwe Kleine-König
2014-05-16 19:24   ` Uwe Kleine-König
2014-05-16 19:24   ` Uwe Kleine-König
2014-05-16 22:21   ` Dan Carpenter
2014-05-16 22:21     ` Dan Carpenter
2014-05-16 22:21     ` Dan Carpenter
2014-05-16 22:47     ` Emil Goode
2014-05-16 22:47       ` Emil Goode
2014-05-16 22:47       ` Emil Goode
2014-05-16 23:18   ` Emil Goode
2014-05-16 23:18     ` Emil Goode
2014-05-16 23:18     ` Emil Goode

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140517153540.GA4309@lianli \
    --to=emilgoode@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.