* [ANN] wireless-regdb: master-2014-05-19
@ 2014-05-19 18:50 ` John W. Linville
0 siblings, 0 replies; 10+ messages in thread
From: John W. Linville @ 2014-05-19 18:50 UTC (permalink / raw)
To: linux-wireless; +Cc: wireless-regdb
A new release of wireless-regdb (master-2014-05-19) is available at:
http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2014.05.19.tar.gz
Here is the short log of the changes included since the 2013-11-27
release:
Bjørn Mork (1):
wireless-regdb: update NO's regulatory rules
Janusz Dziedzic (3):
wireless-regdb: allow max bandwidth to be AUTO calculated
wireless-regdb: set AUTO bandwidth for world regulatory
wireless-regdb: add AUTO-BW rule flag
Johannes Berg (1):
regdb: Republic of Korea: fix double rule
John W. Linville (2):
wireless-regdb: correct some flag damage...
wireless-regdb: update regulatory.bin based on preceding changes.
Luis R. Rodriguez (1):
wireless-regdb: embrace the Developer Certificate of Origin for contributions
Ronald Wahl (1):
wireless-regdb: add channels 52..64 and 100..144 to world regdom
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
^ permalink raw reply [flat|nested] 10+ messages in thread* [wireless-regdb] [ANN] wireless-regdb: master-2014-05-19
@ 2014-05-19 18:50 ` John W. Linville
0 siblings, 0 replies; 10+ messages in thread
From: John W. Linville @ 2014-05-19 18:50 UTC (permalink / raw)
To: linux-wireless; +Cc: wireless-regdb
A new release of wireless-regdb (master-2014-05-19) is available at:
http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2014.05.19.tar.gz
Here is the short log of the changes included since the 2013-11-27
release:
Bjørn Mork (1):
wireless-regdb: update NO's regulatory rules
Janusz Dziedzic (3):
wireless-regdb: allow max bandwidth to be AUTO calculated
wireless-regdb: set AUTO bandwidth for world regulatory
wireless-regdb: add AUTO-BW rule flag
Johannes Berg (1):
regdb: Republic of Korea: fix double rule
John W. Linville (2):
wireless-regdb: correct some flag damage...
wireless-regdb: update regulatory.bin based on preceding changes.
Luis R. Rodriguez (1):
wireless-regdb: embrace the Developer Certificate of Origin for contributions
Ronald Wahl (1):
wireless-regdb: add channels 52..64 and 100..144 to world regdom
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
_______________________________________________
wireless-regdb mailing list
wireless-regdb@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wireless-regdb
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [wireless-regdb] [ANN] wireless-regdb: master-2014-05-19
2014-05-19 18:50 ` [wireless-regdb] " John W. Linville
@ 2014-06-11 19:15 ` Janusz Dziedzic
-1 siblings, 0 replies; 10+ messages in thread
From: Janusz Dziedzic @ 2014-06-11 19:15 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, wireless-regdb@lists.infradead.org
On 19 May 2014 20:50, John W. Linville <linville@tuxdriver.com> wrote:
> A new release of wireless-regdb (master-2014-05-19) is available at:
>
> http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2014.05.19.tar.gz
>
> Here is the short log of the changes included since the 2013-11-27
> release:
>
> Bjørn Mork (1):
> wireless-regdb: update NO's regulatory rules
>
> Janusz Dziedzic (3):
> wireless-regdb: allow max bandwidth to be AUTO calculated
> wireless-regdb: set AUTO bandwidth for world regulatory
This two above should not be merged. That was first version of auto
bandwidth calculation, we skip :)
> wireless-regdb: add AUTO-BW rule flag
>
> Johannes Berg (1):
> regdb: Republic of Korea: fix double rule
>
> John W. Linville (2):
> wireless-regdb: correct some flag damage...
> wireless-regdb: update regulatory.bin based on preceding changes.
>
> Luis R. Rodriguez (1):
> wireless-regdb: embrace the Developer Certificate of Origin for contributions
>
> Ronald Wahl (1):
> wireless-regdb: add channels 52..64 and 100..144 to world regdom
>
> --
> John W. Linville Someday the world will need a hero, and you
> linville@tuxdriver.com might be all we have. Be ready.
>
>
> _______________________________________________
> wireless-regdb mailing list
> wireless-regdb@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/wireless-regdb
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [wireless-regdb] [ANN] wireless-regdb: master-2014-05-19
@ 2014-06-11 19:15 ` Janusz Dziedzic
0 siblings, 0 replies; 10+ messages in thread
From: Janusz Dziedzic @ 2014-06-11 19:15 UTC (permalink / raw)
To: John W. Linville; +Cc: wireless-regdb@lists.infradead.org, linux-wireless
On 19 May 2014 20:50, John W. Linville <linville@tuxdriver.com> wrote:
> A new release of wireless-regdb (master-2014-05-19) is available at:
>
> http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2014.05.19.tar.gz
>
> Here is the short log of the changes included since the 2013-11-27
> release:
>
> Bjørn Mork (1):
> wireless-regdb: update NO's regulatory rules
>
> Janusz Dziedzic (3):
> wireless-regdb: allow max bandwidth to be AUTO calculated
> wireless-regdb: set AUTO bandwidth for world regulatory
This two above should not be merged. That was first version of auto
bandwidth calculation, we skip :)
> wireless-regdb: add AUTO-BW rule flag
>
> Johannes Berg (1):
> regdb: Republic of Korea: fix double rule
>
> John W. Linville (2):
> wireless-regdb: correct some flag damage...
> wireless-regdb: update regulatory.bin based on preceding changes.
>
> Luis R. Rodriguez (1):
> wireless-regdb: embrace the Developer Certificate of Origin for contributions
>
> Ronald Wahl (1):
> wireless-regdb: add channels 52..64 and 100..144 to world regdom
>
> --
> John W. Linville Someday the world will need a hero, and you
> linville@tuxdriver.com might be all we have. Be ready.
>
>
> _______________________________________________
> wireless-regdb mailing list
> wireless-regdb@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/wireless-regdb
_______________________________________________
wireless-regdb mailing list
wireless-regdb@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wireless-regdb
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [wireless-regdb] [ANN] wireless-regdb: master-2014-05-19
2014-06-11 19:15 ` Janusz Dziedzic
@ 2014-06-11 20:42 ` Luis R. Rodriguez
-1 siblings, 0 replies; 10+ messages in thread
From: Luis R. Rodriguez @ 2014-06-11 20:42 UTC (permalink / raw)
To: Janusz Dziedzic
Cc: John W. Linville, wireless-regdb@lists.infradead.org,
linux-wireless
On Wed, Jun 11, 2014 at 09:15:19PM +0200, Janusz Dziedzic wrote:
> On 19 May 2014 20:50, John W. Linville <linville@tuxdriver.com> wrote:
> > A new release of wireless-regdb (master-2014-05-19) is available at:
> >
> > http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2014.05.19.tar.gz
> >
> > Here is the short log of the changes included since the 2013-11-27
> > release:
> >
> > Bjørn Mork (1):
> > wireless-regdb: update NO's regulatory rules
> >
> > Janusz Dziedzic (3):
> > wireless-regdb: allow max bandwidth to be AUTO calculated
> > wireless-regdb: set AUTO bandwidth for world regulatory
> This two above should not be merged. That was first version of auto
> bandwidth calculation, we skip :)
How about on CRDA? Can you check if I merged the wrong stuff as I already
pushed as well? This also currently breaks the parses are there is no
support for the auto stuff yet.
Luis
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [wireless-regdb] [ANN] wireless-regdb: master-2014-05-19
@ 2014-06-11 20:42 ` Luis R. Rodriguez
0 siblings, 0 replies; 10+ messages in thread
From: Luis R. Rodriguez @ 2014-06-11 20:42 UTC (permalink / raw)
To: Janusz Dziedzic
Cc: linux-wireless, wireless-regdb@lists.infradead.org,
John W. Linville
On Wed, Jun 11, 2014 at 09:15:19PM +0200, Janusz Dziedzic wrote:
> On 19 May 2014 20:50, John W. Linville <linville@tuxdriver.com> wrote:
> > A new release of wireless-regdb (master-2014-05-19) is available at:
> >
> > http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2014.05.19.tar.gz
> >
> > Here is the short log of the changes included since the 2013-11-27
> > release:
> >
> > Bjørn Mork (1):
> > wireless-regdb: update NO's regulatory rules
> >
> > Janusz Dziedzic (3):
> > wireless-regdb: allow max bandwidth to be AUTO calculated
> > wireless-regdb: set AUTO bandwidth for world regulatory
> This two above should not be merged. That was first version of auto
> bandwidth calculation, we skip :)
How about on CRDA? Can you check if I merged the wrong stuff as I already
pushed as well? This also currently breaks the parses are there is no
support for the auto stuff yet.
Luis
_______________________________________________
wireless-regdb mailing list
wireless-regdb@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wireless-regdb
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [wireless-regdb] [ANN] wireless-regdb: master-2014-05-19
2014-06-11 20:42 ` Luis R. Rodriguez
@ 2014-06-12 5:01 ` Janusz Dziedzic
-1 siblings, 0 replies; 10+ messages in thread
From: Janusz Dziedzic @ 2014-06-12 5:01 UTC (permalink / raw)
To: Luis R. Rodriguez
Cc: John W. Linville, wireless-regdb@lists.infradead.org,
linux-wireless
On 11 June 2014 22:42, Luis R. Rodriguez <mcgrof@suse.com> wrote:
> On Wed, Jun 11, 2014 at 09:15:19PM +0200, Janusz Dziedzic wrote:
>> On 19 May 2014 20:50, John W. Linville <linville@tuxdriver.com> wrote:
>> > A new release of wireless-regdb (master-2014-05-19) is available at:
>> >
>> > http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2014.05.19.tar.gz
>> >
>> > Here is the short log of the changes included since the 2013-11-27
>> > release:
>> >
>> > Bjørn Mork (1):
>> > wireless-regdb: update NO's regulatory rules
>> >
>> > Janusz Dziedzic (3):
>> > wireless-regdb: allow max bandwidth to be AUTO calculated
>> > wireless-regdb: set AUTO bandwidth for world regulatory
>> This two above should not be merged. That was first version of auto
>> bandwidth calculation, we skip :)
>
> How about on CRDA? Can you check if I merged the wrong stuff as I already
> pushed as well? This also currently breaks the parses are there is no
> support for the auto stuff yet.
>
crda: add AUTO-BW rule flag support - this is correct one.
BR
Janusz
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [wireless-regdb] [ANN] wireless-regdb: master-2014-05-19
@ 2014-06-12 5:01 ` Janusz Dziedzic
0 siblings, 0 replies; 10+ messages in thread
From: Janusz Dziedzic @ 2014-06-12 5:01 UTC (permalink / raw)
To: Luis R. Rodriguez
Cc: linux-wireless, wireless-regdb@lists.infradead.org,
John W. Linville
On 11 June 2014 22:42, Luis R. Rodriguez <mcgrof@suse.com> wrote:
> On Wed, Jun 11, 2014 at 09:15:19PM +0200, Janusz Dziedzic wrote:
>> On 19 May 2014 20:50, John W. Linville <linville@tuxdriver.com> wrote:
>> > A new release of wireless-regdb (master-2014-05-19) is available at:
>> >
>> > http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2014.05.19.tar.gz
>> >
>> > Here is the short log of the changes included since the 2013-11-27
>> > release:
>> >
>> > Bjørn Mork (1):
>> > wireless-regdb: update NO's regulatory rules
>> >
>> > Janusz Dziedzic (3):
>> > wireless-regdb: allow max bandwidth to be AUTO calculated
>> > wireless-regdb: set AUTO bandwidth for world regulatory
>> This two above should not be merged. That was first version of auto
>> bandwidth calculation, we skip :)
>
> How about on CRDA? Can you check if I merged the wrong stuff as I already
> pushed as well? This also currently breaks the parses are there is no
> support for the auto stuff yet.
>
crda: add AUTO-BW rule flag support - this is correct one.
BR
Janusz
_______________________________________________
wireless-regdb mailing list
wireless-regdb@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wireless-regdb
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [wireless-regdb] [ANN] wireless-regdb: master-2014-05-19
2014-06-11 19:15 ` Janusz Dziedzic
@ 2014-06-13 19:25 ` John W. Linville
-1 siblings, 0 replies; 10+ messages in thread
From: John W. Linville @ 2014-06-13 19:25 UTC (permalink / raw)
To: Janusz Dziedzic; +Cc: wireless-regdb@lists.infradead.org, linux-wireless
On Wed, Jun 11, 2014 at 09:15:19PM +0200, Janusz Dziedzic wrote:
> On 19 May 2014 20:50, John W. Linville <linville@tuxdriver.com> wrote:
> > A new release of wireless-regdb (master-2014-05-19) is available at:
> >
> > http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2014.05.19.tar.gz
> >
> > Here is the short log of the changes included since the 2013-11-27
> > release:
> >
> > Bjørn Mork (1):
> > wireless-regdb: update NO's regulatory rules
> >
> > Janusz Dziedzic (3):
> > wireless-regdb: allow max bandwidth to be AUTO calculated
> > wireless-regdb: set AUTO bandwidth for world regulatory
> This two above should not be merged. That was first version of auto
> bandwidth calculation, we skip :)
OK -- obviously I got confused...
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2014-06-13 19:31 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-19 18:50 [ANN] wireless-regdb: master-2014-05-19 John W. Linville
2014-05-19 18:50 ` [wireless-regdb] " John W. Linville
2014-06-11 19:15 ` Janusz Dziedzic
2014-06-11 19:15 ` Janusz Dziedzic
2014-06-11 20:42 ` Luis R. Rodriguez
2014-06-11 20:42 ` Luis R. Rodriguez
2014-06-12 5:01 ` Janusz Dziedzic
2014-06-12 5:01 ` Janusz Dziedzic
2014-06-13 19:25 ` John W. Linville
2014-06-13 19:25 ` John W. Linville
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.