From: Simon Horman <horms@verge.net.au>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 1/2] ARM: shmobile: r8a7779 dtsi: Correct #address-cells/#size-cells for clocks
Date: Mon, 26 May 2014 00:47:21 +0000 [thread overview]
Message-ID: <20140526004720.GD31096@verge.net.au> (raw)
In-Reply-To: <1821194.NVbl22FVTm@avalon>
On Fri, May 23, 2014 at 11:36:16AM +0200, Laurent Pinchart wrote:
> Hi Geert,
>
> Thank you for the patch.
>
> On Friday 23 May 2014 09:46:19 Geert Uytterhoeven wrote:
> > Warning (ranges_format): /clocks has empty "ranges" property but its
> > #address-cells (2) differs from / (1) Warning (ranges_format): /clocks has
> > empty "ranges" property but its #size-cells (2) differs from / (1)
> >
> > As r8a7779 doesn't support LPAE, change #address-cells and #size-cells from
> > "<2>" to "<1>", and update the affected "reg" properties to fix this.
> >
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Thanks, I will queue this up.
> > ---
> > Is it correct that r8a7779 doesn't support LPAE? I don't have the datasheet,
> > but the similar r8a7778 doesn't.
> >
> > v2:
> > - Spin off unit-addresses updates into a separate patch.
> >
> > arch/arm/boot/dts/r8a7779.dtsi | 12 ++++++------
> > 1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
> > index 038c16a18373..395a611e2b5a 100644
> > --- a/arch/arm/boot/dts/r8a7779.dtsi
> > +++ b/arch/arm/boot/dts/r8a7779.dtsi
> > @@ -284,8 +284,8 @@
> > };
> >
> > clocks {
> > - #address-cells = <2>;
> > - #size-cells = <2>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > ranges;
> >
> > /* External root clock */
> > @@ -300,7 +300,7 @@
> > /* Special CPG clocks */
> > cpg_clocks: cpg_clocks@0xe6150000 {
> > compatible = "renesas,r8a7779-cpg-clocks";
> > - reg = <0 0xffc80000 0 0x30>;
> > + reg = <0xffc80000 0x30>;
> > clocks = <&extal_clk>;
> > #clock-cells = <1>;
> > clock-output-names = "plla", "z", "zs", "s",
> > @@ -345,7 +345,7 @@
> > mstp0_clks: mstp0_clks {
> > compatible = "renesas,r8a7779-mstp-clocks",
> > "renesas,cpg-mstp-clocks";
> > - reg = <0 0xffc80030 0 4>;
> > + reg = <0xffc80030 4>;
> > clocks = <&cpg_clocks R8A7779_CLK_S>,
> > <&cpg_clocks R8A7779_CLK_P>,
> > <&cpg_clocks R8A7779_CLK_P>,
> > @@ -382,7 +382,7 @@
> > mstp1_clks: mstp1_clks {
> > compatible = "renesas,r8a7779-mstp-clocks",
> > "renesas,cpg-mstp-clocks";
> > - reg = <0 0xffc80034 0 4>, <0 0xffc80044 0 4>;
> > + reg = <0xffc80034 4>, <0xffc80044 4>;
> > clocks = <&cpg_clocks R8A7779_CLK_P>,
> > <&cpg_clocks R8A7779_CLK_P>,
> > <&cpg_clocks R8A7779_CLK_S>,
> > @@ -411,7 +411,7 @@
> > mstp3_clks: mstp3_clks {
> > compatible = "renesas,r8a7779-mstp-clocks",
> > "renesas,cpg-mstp-clocks";
> > - reg = <0 0xffc8003c 0 4>;
> > + reg = <0xffc8003c 4>;
> > clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>,
> > <&s4_clk>, <&s4_clk>;
> > #clock-cells = <1>;
>
> --
> Regards,
>
> Laurent Pinchart
>
WARNING: multiple messages have this Message-ID (diff)
From: horms@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] ARM: shmobile: r8a7779 dtsi: Correct #address-cells/#size-cells for clocks
Date: Mon, 26 May 2014 09:47:21 +0900 [thread overview]
Message-ID: <20140526004720.GD31096@verge.net.au> (raw)
In-Reply-To: <1821194.NVbl22FVTm@avalon>
On Fri, May 23, 2014 at 11:36:16AM +0200, Laurent Pinchart wrote:
> Hi Geert,
>
> Thank you for the patch.
>
> On Friday 23 May 2014 09:46:19 Geert Uytterhoeven wrote:
> > Warning (ranges_format): /clocks has empty "ranges" property but its
> > #address-cells (2) differs from / (1) Warning (ranges_format): /clocks has
> > empty "ranges" property but its #size-cells (2) differs from / (1)
> >
> > As r8a7779 doesn't support LPAE, change #address-cells and #size-cells from
> > "<2>" to "<1>", and update the affected "reg" properties to fix this.
> >
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Thanks, I will queue this up.
> > ---
> > Is it correct that r8a7779 doesn't support LPAE? I don't have the datasheet,
> > but the similar r8a7778 doesn't.
> >
> > v2:
> > - Spin off unit-addresses updates into a separate patch.
> >
> > arch/arm/boot/dts/r8a7779.dtsi | 12 ++++++------
> > 1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
> > index 038c16a18373..395a611e2b5a 100644
> > --- a/arch/arm/boot/dts/r8a7779.dtsi
> > +++ b/arch/arm/boot/dts/r8a7779.dtsi
> > @@ -284,8 +284,8 @@
> > };
> >
> > clocks {
> > - #address-cells = <2>;
> > - #size-cells = <2>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > ranges;
> >
> > /* External root clock */
> > @@ -300,7 +300,7 @@
> > /* Special CPG clocks */
> > cpg_clocks: cpg_clocks at 0xe6150000 {
> > compatible = "renesas,r8a7779-cpg-clocks";
> > - reg = <0 0xffc80000 0 0x30>;
> > + reg = <0xffc80000 0x30>;
> > clocks = <&extal_clk>;
> > #clock-cells = <1>;
> > clock-output-names = "plla", "z", "zs", "s",
> > @@ -345,7 +345,7 @@
> > mstp0_clks: mstp0_clks {
> > compatible = "renesas,r8a7779-mstp-clocks",
> > "renesas,cpg-mstp-clocks";
> > - reg = <0 0xffc80030 0 4>;
> > + reg = <0xffc80030 4>;
> > clocks = <&cpg_clocks R8A7779_CLK_S>,
> > <&cpg_clocks R8A7779_CLK_P>,
> > <&cpg_clocks R8A7779_CLK_P>,
> > @@ -382,7 +382,7 @@
> > mstp1_clks: mstp1_clks {
> > compatible = "renesas,r8a7779-mstp-clocks",
> > "renesas,cpg-mstp-clocks";
> > - reg = <0 0xffc80034 0 4>, <0 0xffc80044 0 4>;
> > + reg = <0xffc80034 4>, <0xffc80044 4>;
> > clocks = <&cpg_clocks R8A7779_CLK_P>,
> > <&cpg_clocks R8A7779_CLK_P>,
> > <&cpg_clocks R8A7779_CLK_S>,
> > @@ -411,7 +411,7 @@
> > mstp3_clks: mstp3_clks {
> > compatible = "renesas,r8a7779-mstp-clocks",
> > "renesas,cpg-mstp-clocks";
> > - reg = <0 0xffc8003c 0 4>;
> > + reg = <0xffc8003c 4>;
> > clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>,
> > <&s4_clk>, <&s4_clk>;
> > #clock-cells = <1>;
>
> --
> Regards,
>
> Laurent Pinchart
>
WARNING: multiple messages have this Message-ID (diff)
From: Simon Horman <horms@verge.net.au>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
linux-sh@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v2 1/2] ARM: shmobile: r8a7779 dtsi: Correct #address-cells/#size-cells for clocks
Date: Mon, 26 May 2014 09:47:21 +0900 [thread overview]
Message-ID: <20140526004720.GD31096@verge.net.au> (raw)
In-Reply-To: <1821194.NVbl22FVTm@avalon>
On Fri, May 23, 2014 at 11:36:16AM +0200, Laurent Pinchart wrote:
> Hi Geert,
>
> Thank you for the patch.
>
> On Friday 23 May 2014 09:46:19 Geert Uytterhoeven wrote:
> > Warning (ranges_format): /clocks has empty "ranges" property but its
> > #address-cells (2) differs from / (1) Warning (ranges_format): /clocks has
> > empty "ranges" property but its #size-cells (2) differs from / (1)
> >
> > As r8a7779 doesn't support LPAE, change #address-cells and #size-cells from
> > "<2>" to "<1>", and update the affected "reg" properties to fix this.
> >
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Thanks, I will queue this up.
> > ---
> > Is it correct that r8a7779 doesn't support LPAE? I don't have the datasheet,
> > but the similar r8a7778 doesn't.
> >
> > v2:
> > - Spin off unit-addresses updates into a separate patch.
> >
> > arch/arm/boot/dts/r8a7779.dtsi | 12 ++++++------
> > 1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
> > index 038c16a18373..395a611e2b5a 100644
> > --- a/arch/arm/boot/dts/r8a7779.dtsi
> > +++ b/arch/arm/boot/dts/r8a7779.dtsi
> > @@ -284,8 +284,8 @@
> > };
> >
> > clocks {
> > - #address-cells = <2>;
> > - #size-cells = <2>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > ranges;
> >
> > /* External root clock */
> > @@ -300,7 +300,7 @@
> > /* Special CPG clocks */
> > cpg_clocks: cpg_clocks@0xe6150000 {
> > compatible = "renesas,r8a7779-cpg-clocks";
> > - reg = <0 0xffc80000 0 0x30>;
> > + reg = <0xffc80000 0x30>;
> > clocks = <&extal_clk>;
> > #clock-cells = <1>;
> > clock-output-names = "plla", "z", "zs", "s",
> > @@ -345,7 +345,7 @@
> > mstp0_clks: mstp0_clks {
> > compatible = "renesas,r8a7779-mstp-clocks",
> > "renesas,cpg-mstp-clocks";
> > - reg = <0 0xffc80030 0 4>;
> > + reg = <0xffc80030 4>;
> > clocks = <&cpg_clocks R8A7779_CLK_S>,
> > <&cpg_clocks R8A7779_CLK_P>,
> > <&cpg_clocks R8A7779_CLK_P>,
> > @@ -382,7 +382,7 @@
> > mstp1_clks: mstp1_clks {
> > compatible = "renesas,r8a7779-mstp-clocks",
> > "renesas,cpg-mstp-clocks";
> > - reg = <0 0xffc80034 0 4>, <0 0xffc80044 0 4>;
> > + reg = <0xffc80034 4>, <0xffc80044 4>;
> > clocks = <&cpg_clocks R8A7779_CLK_P>,
> > <&cpg_clocks R8A7779_CLK_P>,
> > <&cpg_clocks R8A7779_CLK_S>,
> > @@ -411,7 +411,7 @@
> > mstp3_clks: mstp3_clks {
> > compatible = "renesas,r8a7779-mstp-clocks",
> > "renesas,cpg-mstp-clocks";
> > - reg = <0 0xffc8003c 0 4>;
> > + reg = <0xffc8003c 4>;
> > clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>,
> > <&s4_clk>, <&s4_clk>;
> > #clock-cells = <1>;
>
> --
> Regards,
>
> Laurent Pinchart
>
next prev parent reply other threads:[~2014-05-26 0:47 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-23 7:46 [PATCH v2 0/2] ARM: shmobile: r8a7779/marzen CCF DT updates Geert Uytterhoeven
2014-05-23 7:46 ` Geert Uytterhoeven
2014-05-23 7:46 ` Geert Uytterhoeven
2014-05-23 7:46 ` [PATCH v2 1/2] ARM: shmobile: r8a7779 dtsi: Correct #address-cells/#size-cells for clocks Geert Uytterhoeven
2014-05-23 7:46 ` Geert Uytterhoeven
2014-05-23 7:46 ` Geert Uytterhoeven
2014-05-23 9:36 ` Laurent Pinchart
2014-05-23 9:36 ` Laurent Pinchart
2014-05-23 9:36 ` Laurent Pinchart
2014-05-26 0:47 ` Simon Horman [this message]
2014-05-26 0:47 ` Simon Horman
2014-05-26 0:47 ` Simon Horman
2014-05-23 7:46 ` [PATCH v2 2/2] ARM: shmobile: r8a7779 dtsi: Update unit-addresses " Geert Uytterhoeven
2014-05-23 7:46 ` Geert Uytterhoeven
2014-05-23 7:46 ` Geert Uytterhoeven
2014-05-23 9:36 ` Laurent Pinchart
2014-05-23 9:36 ` Laurent Pinchart
2014-05-23 9:36 ` Laurent Pinchart
2014-05-26 0:44 ` Simon Horman
2014-05-26 0:44 ` Simon Horman
2014-05-26 0:44 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140526004720.GD31096@verge.net.au \
--to=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.