From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] usb: ci_udc: fix interaction with CONFIG_USB_ETH_CDC
Date: Mon, 30 Jun 2014 23:50:34 +0200 [thread overview]
Message-ID: <201406302350.34366.marex@denx.de> (raw)
In-Reply-To: <53B1D9FC.6090501@posteo.de>
On Monday, June 30, 2014 at 11:43:24 PM, J?rg Krause wrote:
> On 06/30/2014 11:15 PM, Marek Vasut wrote:
> > On Monday, June 30, 2014 at 10:55:37 PM, J?rg Krause wrote:
> > [...]
> >
> >>>>> 2) You applied "allow multiple buffer allocs per ep"
> >>>>
> >>>> Setting #define CONFIG_SYS_CACHELINE_SIZE 32 to my config file helped
> >>>> here. But still timeouts. First run almost always runs fine, only
> >>>> sometimes timeouts while receiving a packet, but always running to the
> >>>> end. Running tftp after this a second time and more fails with a
> >>>> ERROR: The remote end did not respond in time. at
> >>>> drivers/usb/gadget/ether.c:2388/usb_eth_init(), but sometimes it
> >>>> works.
> >>>>
> >>>> Setting CONFIG_SYS_CACHELINE_SIZE 32 does not make it better (as I
> >>>> previously wrote it).
> >>
> >> Sorry, this is a typo. It should be CONFIG_SYS_CACHELINE_SIZE 16 (not
> >> 32).
> >
> > MX28 has 32b-long cachelines. Setting this to 16 is nonsense.
> > [...]
>
> Yes it is. But if I do not set cacheline size to 32 in my config header
> file it will be 64, as I stated in a previous mail.
>
> I checked this and I found that ARCH_DMA_MINALIGN is set to 64,
> which is not true for Freescale i.MX28. This processor has an
> ARM926EJ-S, which has an cache line size of 32. In
> arch/arm/include/asm/cache.h the macro ARCH_DMA_MINALIGN is defined
> as followed:
> #ifdef CONFIG_SYS_CACHELINE_SIZE
> #define ARCH_DMA_MINALIGN CONFIG_SYS_CACHELINE_SIZE
> #else
> #define ARCH_DMA_MINALIGN 64
> #endif
>
> And in /arch/arm/cpu/arm926ejs/cache.c as followed:
> #ifndef CONFIG_SYS_CACHELINE_SIZE
> #define CONFIG_SYS_CACHELINE_SIZE 32
> #endif
>
> arch/arm/include/asm/cache.h does not see the definition of
> CONFIG_SYS_CACHELINE_SIZE in /arch/arm/cpu/arm926ejs/cache.c, so
> it's a bad place to put it in there.
>
>
> I was just curious of the impact on the behaviour of the USB ethernet
> gadget driver.
Well okay, cacheline length and DMA alignment needs are two different things.
Larger than necessary ARCH_DMA_MINALIGN cannot hurt, though there should be a
patch adding CONFIG_SYS_CACHELINE_SIZE 32 for MXS into include/configs/mxs.h it
seems.
Best regards,
Marek Vasut
next prev parent reply other threads:[~2014-06-30 21:50 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-23 18:02 [U-Boot] [PATCH] usb: ci_udc: fix interaction with CONFIG_USB_ETH_CDC Stephen Warren
2014-06-23 19:03 ` Eric Nelson
2014-06-25 13:51 ` Marek Vasut
2014-06-25 16:06 ` Stephen Warren
2014-06-27 21:37 ` Jörg Krause
2014-06-27 21:52 ` Jörg Krause
2014-06-27 21:56 ` Stephen Warren
2014-06-27 23:27 ` Jörg Krause
2014-06-27 21:55 ` Stephen Warren
2014-06-27 23:16 ` Jörg Krause
2014-06-27 23:37 ` Stephen Warren
2014-06-28 0:09 ` Jörg Krause
2014-06-28 1:34 ` Jörg Krause
2014-06-28 20:37 ` Jörg Krause
2014-06-28 20:45 ` Marek Vasut
2014-06-28 20:53 ` Jörg Krause
2014-06-29 20:33 ` Jörg Krause
2014-06-30 9:37 ` Marek Vasut
2014-06-30 13:34 ` Jörg Krause
2014-06-30 16:02 ` Stephen Warren
2014-06-30 19:55 ` Stephen Warren
2014-06-30 22:44 ` Jörg Krause
2014-06-30 22:51 ` Stephen Warren
2014-06-30 23:17 ` Jörg Krause
2014-06-30 23:56 ` Marek Vasut
2014-06-30 20:55 ` Jörg Krause
2014-06-30 21:15 ` Marek Vasut
2014-06-30 21:43 ` Jörg Krause
2014-06-30 21:50 ` Marek Vasut [this message]
2014-06-25 20:20 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201406302350.34366.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.