From: mturquette@linaro.org (Mike Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/6] clk: sunxi: fixes, cleanups and A23 basic clocks
Date: Wed, 02 Jul 2014 15:35:52 -0700 [thread overview]
Message-ID: <20140702223552.7440.60829@quantum> (raw)
In-Reply-To: <1403798144-32188-1-git-send-email-wens@csie.org>
Quoting Chen-Yu Tsai (2014-06-26 08:55:38)
> Hi everyone,
>
> This is v4 of the sun8i clock series, which adds basic clock
> support for the A23 SoC. It is based on my initial sun8i bring
> up series [1]. This series was split up from the original A23
> series [2]. Yet to come are more clocks, reset controllers,
> prcm, pinctrl, and mmc.
Hello Chen-Yu,
This series looks good to me.
Maxime,
I see that you Acked it already. Are you planning to roll this into a
pull request later on?
Regards,
Mike
>
> The first patch fixes the reworked clock protection code merged in
> 3.16-rc1, which unintentionally made clock gates unprotectable.
>
> The second patch moves the remaining "ahb_sdram" clock to the
> protected clock list, now that it works.
>
> The third patch adds support for factor clocks that have an N factor
> not starting from 0. This is found on some PLLs in A31/A23.
>
> The fourth patch adds table-based dividers for div clocks, as some
> clocks, such as apb0 divider on sun4/5/7i, apb1 on sun6/8i and axi
> on sun8i.
>
> The fifth patch adds support for the basic clocks in the A23, just
> PLL1 for cpus, and the system bus clocks and gates.
>
> The last patch adds the DT nodes for the newly added clocks, and
> updates clock phandles for existing peripherals, the uarts.
>
> Originally I intended for patch 1 to be merged as a fix for 3.16.
> However, the only user of the affected code, sun6i's "ahb1_sdram"
> clock, doesn't seem to result in any runtime issues. So this whole
> series can go into 3.17.
>
>
> Related changes since v3:
>
> - Dropped fields with default values from sun8i_a23_axi_div_data
> - Added Maxime's Acked-by
> - Fixed incorrect compatible string for axi clock node
> - Updated clock phandles for uarts in dtsi
>
> Related changes since v2:
>
> - Rewrote factor clocks to support any (0~255) N factor starting value
>
> Related changes since v1:
>
> - Added "clk: sunxi: Add support for table-based divider clocks"
> - Added table-based divider axi clock
> - Fixed incorrectly squashed fixups
>
>
> Cheers
> ChenYu
>
>
> [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-June/265211.html
> [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-May/259097.html
>
> Chen-Yu Tsai (6):
> clk: sunxi: register clock gates with clkdev
> clk: sunxi: move "ahb_sdram" to protected clock list
> clk: sunxi: Support factor clocks with N factor starting not from 0
> clk: sunxi: Add support for table-based divider clocks
> clk: sunxi: Add A23 clocks support
> ARM: sun8i: Add basic clock nodes to the DTSI
>
> Documentation/devicetree/bindings/clock/sunxi.txt | 5 +
> arch/arm/boot/dts/sun8i-a23.dtsi | 125 +++++++++++++++++++++-
> drivers/clk/sunxi/clk-factors.c | 2 +-
> drivers/clk/sunxi/clk-factors.h | 1 +
> drivers/clk/sunxi/clk-sunxi.c | 119 ++++++++++++++++++--
> 5 files changed, 237 insertions(+), 15 deletions(-)
>
> --
> 2.0.0
>
WARNING: multiple messages have this Message-ID (diff)
From: Mike Turquette <mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Emilio Lopez <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH v4 0/6] clk: sunxi: fixes, cleanups and A23 basic clocks
Date: Wed, 02 Jul 2014 15:35:52 -0700 [thread overview]
Message-ID: <20140702223552.7440.60829@quantum> (raw)
In-Reply-To: <1403798144-32188-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
Quoting Chen-Yu Tsai (2014-06-26 08:55:38)
> Hi everyone,
>
> This is v4 of the sun8i clock series, which adds basic clock
> support for the A23 SoC. It is based on my initial sun8i bring
> up series [1]. This series was split up from the original A23
> series [2]. Yet to come are more clocks, reset controllers,
> prcm, pinctrl, and mmc.
Hello Chen-Yu,
This series looks good to me.
Maxime,
I see that you Acked it already. Are you planning to roll this into a
pull request later on?
Regards,
Mike
>
> The first patch fixes the reworked clock protection code merged in
> 3.16-rc1, which unintentionally made clock gates unprotectable.
>
> The second patch moves the remaining "ahb_sdram" clock to the
> protected clock list, now that it works.
>
> The third patch adds support for factor clocks that have an N factor
> not starting from 0. This is found on some PLLs in A31/A23.
>
> The fourth patch adds table-based dividers for div clocks, as some
> clocks, such as apb0 divider on sun4/5/7i, apb1 on sun6/8i and axi
> on sun8i.
>
> The fifth patch adds support for the basic clocks in the A23, just
> PLL1 for cpus, and the system bus clocks and gates.
>
> The last patch adds the DT nodes for the newly added clocks, and
> updates clock phandles for existing peripherals, the uarts.
>
> Originally I intended for patch 1 to be merged as a fix for 3.16.
> However, the only user of the affected code, sun6i's "ahb1_sdram"
> clock, doesn't seem to result in any runtime issues. So this whole
> series can go into 3.17.
>
>
> Related changes since v3:
>
> - Dropped fields with default values from sun8i_a23_axi_div_data
> - Added Maxime's Acked-by
> - Fixed incorrect compatible string for axi clock node
> - Updated clock phandles for uarts in dtsi
>
> Related changes since v2:
>
> - Rewrote factor clocks to support any (0~255) N factor starting value
>
> Related changes since v1:
>
> - Added "clk: sunxi: Add support for table-based divider clocks"
> - Added table-based divider axi clock
> - Fixed incorrectly squashed fixups
>
>
> Cheers
> ChenYu
>
>
> [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-June/265211.html
> [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-May/259097.html
>
> Chen-Yu Tsai (6):
> clk: sunxi: register clock gates with clkdev
> clk: sunxi: move "ahb_sdram" to protected clock list
> clk: sunxi: Support factor clocks with N factor starting not from 0
> clk: sunxi: Add support for table-based divider clocks
> clk: sunxi: Add A23 clocks support
> ARM: sun8i: Add basic clock nodes to the DTSI
>
> Documentation/devicetree/bindings/clock/sunxi.txt | 5 +
> arch/arm/boot/dts/sun8i-a23.dtsi | 125 +++++++++++++++++++++-
> drivers/clk/sunxi/clk-factors.c | 2 +-
> drivers/clk/sunxi/clk-factors.h | 1 +
> drivers/clk/sunxi/clk-sunxi.c | 119 ++++++++++++++++++--
> 5 files changed, 237 insertions(+), 15 deletions(-)
>
> --
> 2.0.0
>
WARNING: multiple messages have this Message-ID (diff)
From: Mike Turquette <mturquette@linaro.org>
To: Chen-Yu Tsai <wens@csie.org>,
"Maxime Ripard" <maxime.ripard@free-electrons.com>,
"Emilio Lopez" <emilio@elopez.com.ar>
Cc: "Chen-Yu Tsai" <wens@csie.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: Re: [PATCH v4 0/6] clk: sunxi: fixes, cleanups and A23 basic clocks
Date: Wed, 02 Jul 2014 15:35:52 -0700 [thread overview]
Message-ID: <20140702223552.7440.60829@quantum> (raw)
In-Reply-To: <1403798144-32188-1-git-send-email-wens@csie.org>
Quoting Chen-Yu Tsai (2014-06-26 08:55:38)
> Hi everyone,
>
> This is v4 of the sun8i clock series, which adds basic clock
> support for the A23 SoC. It is based on my initial sun8i bring
> up series [1]. This series was split up from the original A23
> series [2]. Yet to come are more clocks, reset controllers,
> prcm, pinctrl, and mmc.
Hello Chen-Yu,
This series looks good to me.
Maxime,
I see that you Acked it already. Are you planning to roll this into a
pull request later on?
Regards,
Mike
>
> The first patch fixes the reworked clock protection code merged in
> 3.16-rc1, which unintentionally made clock gates unprotectable.
>
> The second patch moves the remaining "ahb_sdram" clock to the
> protected clock list, now that it works.
>
> The third patch adds support for factor clocks that have an N factor
> not starting from 0. This is found on some PLLs in A31/A23.
>
> The fourth patch adds table-based dividers for div clocks, as some
> clocks, such as apb0 divider on sun4/5/7i, apb1 on sun6/8i and axi
> on sun8i.
>
> The fifth patch adds support for the basic clocks in the A23, just
> PLL1 for cpus, and the system bus clocks and gates.
>
> The last patch adds the DT nodes for the newly added clocks, and
> updates clock phandles for existing peripherals, the uarts.
>
> Originally I intended for patch 1 to be merged as a fix for 3.16.
> However, the only user of the affected code, sun6i's "ahb1_sdram"
> clock, doesn't seem to result in any runtime issues. So this whole
> series can go into 3.17.
>
>
> Related changes since v3:
>
> - Dropped fields with default values from sun8i_a23_axi_div_data
> - Added Maxime's Acked-by
> - Fixed incorrect compatible string for axi clock node
> - Updated clock phandles for uarts in dtsi
>
> Related changes since v2:
>
> - Rewrote factor clocks to support any (0~255) N factor starting value
>
> Related changes since v1:
>
> - Added "clk: sunxi: Add support for table-based divider clocks"
> - Added table-based divider axi clock
> - Fixed incorrectly squashed fixups
>
>
> Cheers
> ChenYu
>
>
> [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-June/265211.html
> [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-May/259097.html
>
> Chen-Yu Tsai (6):
> clk: sunxi: register clock gates with clkdev
> clk: sunxi: move "ahb_sdram" to protected clock list
> clk: sunxi: Support factor clocks with N factor starting not from 0
> clk: sunxi: Add support for table-based divider clocks
> clk: sunxi: Add A23 clocks support
> ARM: sun8i: Add basic clock nodes to the DTSI
>
> Documentation/devicetree/bindings/clock/sunxi.txt | 5 +
> arch/arm/boot/dts/sun8i-a23.dtsi | 125 +++++++++++++++++++++-
> drivers/clk/sunxi/clk-factors.c | 2 +-
> drivers/clk/sunxi/clk-factors.h | 1 +
> drivers/clk/sunxi/clk-sunxi.c | 119 ++++++++++++++++++--
> 5 files changed, 237 insertions(+), 15 deletions(-)
>
> --
> 2.0.0
>
next prev parent reply other threads:[~2014-07-02 22:35 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-26 15:55 [PATCH v4 0/6] clk: sunxi: fixes, cleanups and A23 basic clocks Chen-Yu Tsai
2014-06-26 15:55 ` Chen-Yu Tsai
2014-06-26 15:55 ` Chen-Yu Tsai
2014-06-26 15:55 ` [PATCH v4 1/6] clk: sunxi: register clock gates with clkdev Chen-Yu Tsai
2014-06-26 15:55 ` Chen-Yu Tsai
2014-06-26 15:55 ` Chen-Yu Tsai
2014-06-26 15:55 ` [PATCH v4 2/6] clk: sunxi: move "ahb_sdram" to protected clock list Chen-Yu Tsai
2014-06-26 15:55 ` Chen-Yu Tsai
2014-06-26 15:55 ` Chen-Yu Tsai
2014-06-26 15:55 ` [PATCH v4 3/6] clk: sunxi: Support factor clocks with N factor starting not from 0 Chen-Yu Tsai
2014-06-26 15:55 ` Chen-Yu Tsai
2014-06-26 15:55 ` Chen-Yu Tsai
2014-06-26 15:55 ` [PATCH v4 4/6] clk: sunxi: Add support for table-based divider clocks Chen-Yu Tsai
2014-06-26 15:55 ` Chen-Yu Tsai
2014-06-26 15:55 ` Chen-Yu Tsai
2014-06-26 15:55 ` [PATCH v4 5/6] clk: sunxi: Add A23 clocks support Chen-Yu Tsai
2014-06-26 15:55 ` Chen-Yu Tsai
2014-06-26 15:55 ` Chen-Yu Tsai
2014-06-26 15:55 ` [PATCH v4 6/6] ARM: sun8i: Add basic clock nodes to the DTSI Chen-Yu Tsai
2014-06-26 15:55 ` Chen-Yu Tsai
2014-06-26 15:55 ` Chen-Yu Tsai
2014-07-02 22:35 ` Mike Turquette [this message]
2014-07-02 22:35 ` [PATCH v4 0/6] clk: sunxi: fixes, cleanups and A23 basic clocks Mike Turquette
2014-07-02 22:35 ` Mike Turquette
2014-07-03 7:26 ` Maxime Ripard
2014-07-03 7:26 ` Maxime Ripard
2014-07-03 7:26 ` Maxime Ripard
2014-07-03 7:37 ` Chen-Yu Tsai
2014-07-03 7:37 ` Chen-Yu Tsai
2014-07-03 7:37 ` Chen-Yu Tsai
2014-07-04 10:07 ` Maxime Ripard
2014-07-04 10:07 ` Maxime Ripard
2014-07-04 10:07 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140702223552.7440.60829@quantum \
--to=mturquette@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.