From: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: amit daniel kachhap
<amit.daniel-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Cc: Javier Martinez Canillas
<javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mike Turquette
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Alessandro Zummo
<a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>,
Kukjin Kim <kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
Tomeu Vizoso
<tomeu.vizoso-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>,
Krzysztof Kozlowski
<k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Yadwinder Singh Brar
<yadi.brar01-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Tushar Behera <trblinux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Andreas Farber <afaerber-l3A5Bk7waGM@public.gmane.org>,
LAK
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH v6 15/23] regulator: max77686: Setup DVS-related GPIOs on probe
Date: Thu, 10 Jul 2014 14:25:34 +0100 [thread overview]
Message-ID: <20140710132534.GD11948@lee--X1> (raw)
In-Reply-To: <CADGdYn4EURaHinWVksQSPzVr=CkZYcrqvWsO7mKDz_gY9XB__Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On Thu, 10 Jul 2014, amit daniel kachhap wrote:
> On Fri, Jul 4, 2014 at 3:25 PM, Javier Martinez Canillas
> <javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org> wrote:
> > MAX77686 PMIC support Dyamic Voltage Scaling (DVS) on a set
> > of Buck regulators. A number of GPIO are connected to these
> > lines and are requested by the mfd driver. Setup the GPIO
> > pins from the regulator driver.
> If possible merge this patch with patch 8. Both are adding DVS
> support. Put regmap_copy dependency patch in very beginning.
You want to merge two patches which deal with different subsystems?
That's the opposite of what we usually try and achieve.
> > Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> > ---
> > drivers/regulator/max77686.c | 34 ++++++++++++++++++++++++++++++++++
> > 1 file changed, 34 insertions(+)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 15/23] regulator: max77686: Setup DVS-related GPIOs on probe
Date: Thu, 10 Jul 2014 14:25:34 +0100 [thread overview]
Message-ID: <20140710132534.GD11948@lee--X1> (raw)
In-Reply-To: <CADGdYn4EURaHinWVksQSPzVr=CkZYcrqvWsO7mKDz_gY9XB__Q@mail.gmail.com>
On Thu, 10 Jul 2014, amit daniel kachhap wrote:
> On Fri, Jul 4, 2014 at 3:25 PM, Javier Martinez Canillas
> <javier.martinez@collabora.co.uk> wrote:
> > MAX77686 PMIC support Dyamic Voltage Scaling (DVS) on a set
> > of Buck regulators. A number of GPIO are connected to these
> > lines and are requested by the mfd driver. Setup the GPIO
> > pins from the regulator driver.
> If possible merge this patch with patch 8. Both are adding DVS
> support. Put regmap_copy dependency patch in very beginning.
You want to merge two patches which deal with different subsystems?
That's the opposite of what we usually try and achieve.
> > Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> > ---
> > drivers/regulator/max77686.c | 34 ++++++++++++++++++++++++++++++++++
> > 1 file changed, 34 insertions(+)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: amit daniel kachhap <amit.daniel@samsung.com>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>,
Mark Brown <broonie@kernel.org>,
Mike Turquette <mturquette@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Kukjin Kim <kgene.kim@samsung.com>,
Doug Anderson <dianders@chromium.org>,
Olof Johansson <olof@lixom.net>,
Tomeu Vizoso <tomeu.vizoso@collabora.com>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Yadwinder Singh Brar <yadi.brar01@gmail.com>,
Tushar Behera <trblinux@gmail.com>,
Andreas Farber <afaerber@suse.de>,
LAK <linux-arm-kernel@lists.infradead.org>,
devicetree@vger.kernel.org,
"linux-samsung-soc@vger.kernel.org"
<linux-samsung-soc@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v6 15/23] regulator: max77686: Setup DVS-related GPIOs on probe
Date: Thu, 10 Jul 2014 14:25:34 +0100 [thread overview]
Message-ID: <20140710132534.GD11948@lee--X1> (raw)
In-Reply-To: <CADGdYn4EURaHinWVksQSPzVr=CkZYcrqvWsO7mKDz_gY9XB__Q@mail.gmail.com>
On Thu, 10 Jul 2014, amit daniel kachhap wrote:
> On Fri, Jul 4, 2014 at 3:25 PM, Javier Martinez Canillas
> <javier.martinez@collabora.co.uk> wrote:
> > MAX77686 PMIC support Dyamic Voltage Scaling (DVS) on a set
> > of Buck regulators. A number of GPIO are connected to these
> > lines and are requested by the mfd driver. Setup the GPIO
> > pins from the regulator driver.
> If possible merge this patch with patch 8. Both are adding DVS
> support. Put regmap_copy dependency patch in very beginning.
You want to merge two patches which deal with different subsystems?
That's the opposite of what we usually try and achieve.
> > Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> > ---
> > drivers/regulator/max77686.c | 34 ++++++++++++++++++++++++++++++++++
> > 1 file changed, 34 insertions(+)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2014-07-10 13:25 UTC|newest]
Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-04 9:54 [PATCH v6 00/23] Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-07-04 9:54 ` Javier Martinez Canillas
2014-07-04 9:54 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 01/23] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 02/23] mfd: max77686: Add power management support Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 10:51 ` Krzysztof Kozlowski
2014-07-04 10:51 ` Krzysztof Kozlowski
2014-07-04 9:55 ` [PATCH v6 03/23] mfd: max77686: Don't define dummy function if OF isn't enabled Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 04/23] mfd: max77686: Make platform data over-rule DT Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 05/23] mfd: max77686: Return correct error when pdata isn't found Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 06/23] mfd: max77686: Make error checking consistent Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 10:54 ` Krzysztof Kozlowski
2014-07-04 10:54 ` Krzysztof Kozlowski
2014-07-04 9:55 ` [PATCH v6 07/23] mfd: max77686: Remove unneeded OOM error message Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 08/23] mfd: max77686: Add Dynamic Voltage Scaling (DVS) support Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 11:15 ` Krzysztof Kozlowski
2014-07-04 11:15 ` Krzysztof Kozlowski
2014-07-04 11:32 ` Javier Martinez Canillas
2014-07-04 11:32 ` Javier Martinez Canillas
2014-07-04 11:32 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 09/23] rtc: max77686: Allow the max77686 rtc to wakeup the system Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 10/23] clk: max77686: Add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 11/23] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 12/23] clk: max77686: Convert to the generic max clock driver Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 13/23] clk: max77686: Improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 14/23] regmap: Add regmap_reg_copy function Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 15/23] regulator: max77686: Setup DVS-related GPIOs on probe Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-10 10:08 ` amit daniel kachhap
2014-07-10 10:08 ` amit daniel kachhap
[not found] ` <CADGdYn4EURaHinWVksQSPzVr=CkZYcrqvWsO7mKDz_gY9XB__Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-10 13:25 ` Lee Jones [this message]
2014-07-10 13:25 ` Lee Jones
2014-07-10 13:25 ` Lee Jones
2014-07-11 2:03 ` Javier Martinez Canillas
2014-07-11 2:03 ` Javier Martinez Canillas
2014-07-11 2:03 ` Javier Martinez Canillas
2014-07-11 9:31 ` amit daniel kachhap
2014-07-11 9:31 ` amit daniel kachhap
2014-07-04 9:55 ` [PATCH v6 16/23] mfd: max77686: Add documentation for DVS bindings Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 17/23] mfd: max77686: Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 11:30 ` Krzysztof Kozlowski
2014-07-04 11:30 ` Krzysztof Kozlowski
2014-07-04 11:35 ` Javier Martinez Canillas
2014-07-04 11:35 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 18/23] mfd: max77802: Add DT binding documentation Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 19/23] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 20/23] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 21/23] clk: max77802: Add DT binding documentation Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 22/23] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
2014-07-04 11:56 ` Krzysztof Kozlowski
2014-07-04 11:56 ` Krzysztof Kozlowski
2014-07-04 12:52 ` Javier Martinez Canillas
2014-07-04 12:52 ` Javier Martinez Canillas
2014-07-04 13:11 ` Krzysztof Kozlowski
2014-07-04 13:11 ` Krzysztof Kozlowski
2014-07-04 13:23 ` Javier Martinez Canillas
2014-07-04 13:23 ` Javier Martinez Canillas
2014-07-04 13:23 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 23/23] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140710132534.GD11948@lee--X1 \
--to=lee.jones-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org \
--cc=afaerber-l3A5Bk7waGM@public.gmane.org \
--cc=amit.daniel-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org \
--cc=k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=tomeu.vizoso-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org \
--cc=trblinux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=yadi.brar01-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.