[PATCH v2 1/2] dmaengine: Clarify device parameter for dma_sync_*_for_*()

[PATCH v2 1/2] dmaengine: Clarify device parameter for dma_sync_*_for_*()

[Geert Uytterhoeven]

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - New
---
 Documentation/dmaengine.txt | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt
index 879b6e31e2da..87d3f192e160 100644
--- a/Documentation/dmaengine.txt
+++ b/Documentation/dmaengine.txt
@@ -100,8 +100,10 @@ The slave DMA usage consists of following steps:
    The peripheral driver is expected to have mapped the scatterlist for
    the DMA operation prior to calling device_prep_slave_sg, and must
    keep the scatterlist mapped until the DMA operation has completed.
-   The scatterlist must be mapped using the DMA struct device.  So,
-   normal setup should look like this:
+   The scatterlist must be mapped using the DMA struct device.
+   If a mapping needs to be synchronized later, dma_sync_*_for_*() must be
+   called using the DMA struct device, too.
+   So, normal setup should look like this:
 
 	nr_sg = dma_map_sg(chan->device->dev, sgl, sg_len);
 	if (nr_sg = 0)
-- 
1.9.1

[PATCH v2 1/2] dmaengine: Clarify device parameter for dma_sync_*_for_*()

[Geert Uytterhoeven]

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - New
---
 Documentation/dmaengine.txt | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt
index 879b6e31e2da..87d3f192e160 100644
--- a/Documentation/dmaengine.txt
+++ b/Documentation/dmaengine.txt
@@ -100,8 +100,10 @@ The slave DMA usage consists of following steps:
    The peripheral driver is expected to have mapped the scatterlist for
    the DMA operation prior to calling device_prep_slave_sg, and must
    keep the scatterlist mapped until the DMA operation has completed.
-   The scatterlist must be mapped using the DMA struct device.  So,
-   normal setup should look like this:
+   The scatterlist must be mapped using the DMA struct device.
+   If a mapping needs to be synchronized later, dma_sync_*_for_*() must be
+   called using the DMA struct device, too.
+   So, normal setup should look like this:
 
 	nr_sg = dma_map_sg(chan->device->dev, sgl, sg_len);
 	if (nr_sg == 0)
-- 
1.9.1

[PATCH v2 2/2] spi: sh-msiof: Use correct device for DMA mapping with IOMMU

[Geert Uytterhoeven]

To function correctly in the presence of an IOMMU, the DMA buffers must be
mapped using the DMA channel's device instead of the MSIOF platform
device's device.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - Use "dma_chan.device->dev" instead of "dma_chan.dev->device",
  - Also fix calls to dma_unmap_single(), dma_mapping_error(), and
    dma_sync_single_for_*()".
---
 drivers/spi/spi-sh-msiof.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 9922ed3a4441..6f449b24704a 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -644,8 +644,8 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx,
 
 	if (tx) {
 		ier_bits |= IER_TDREQE | IER_TDMAE;
-		dma_sync_single_for_device(&p->pdev->dev, p->tx_dma_addr, len,
-					   DMA_TO_DEVICE);
+		dma_sync_single_for_device(p->master->dma_tx->device->dev,
+					   p->tx_dma_addr, len, DMA_TO_DEVICE);
 		desc_tx = dmaengine_prep_slave_single(p->master->dma_tx,
 					p->tx_dma_addr, len, DMA_TO_DEVICE,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
@@ -716,7 +716,8 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx,
 	}
 
 	if (rx)
-		dma_sync_single_for_cpu(&p->pdev->dev, p->rx_dma_addr, len,
+		dma_sync_single_for_cpu(p->master->dma_rx->device->dev,
+					p->rx_dma_addr, len,
 					DMA_FROM_DEVICE);
 
 	return 0;
@@ -996,6 +997,7 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p)
 	const struct sh_msiof_spi_info *info = dev_get_platdata(dev);
 	const struct resource *res;
 	struct spi_master *master;
+	struct device *tx_dev, *rx_dev;
 
 	if (!info || !info->dma_tx_id || !info->dma_rx_id)
 		return 0;	/* The driver assumes no error */
@@ -1026,21 +1028,23 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p)
 	if (!p->rx_dma_page)
 		goto free_tx_page;
 
-	p->tx_dma_addr = dma_map_single(dev, p->tx_dma_page, PAGE_SIZE,
+	tx_dev = master->dma_tx->device->dev;
+	p->tx_dma_addr = dma_map_single(tx_dev, p->tx_dma_page, PAGE_SIZE,
 					DMA_TO_DEVICE);
-	if (dma_mapping_error(dev, p->tx_dma_addr))
+	if (dma_mapping_error(tx_dev, p->tx_dma_addr))
 		goto free_rx_page;
 
-	p->rx_dma_addr = dma_map_single(dev, p->rx_dma_page, PAGE_SIZE,
+	rx_dev = master->dma_rx->device->dev;
+	p->rx_dma_addr = dma_map_single(rx_dev, p->rx_dma_page, PAGE_SIZE,
 					DMA_FROM_DEVICE);
-	if (dma_mapping_error(dev, p->rx_dma_addr))
+	if (dma_mapping_error(rx_dev, p->rx_dma_addr))
 		goto unmap_tx_page;
 
 	dev_info(dev, "DMA available");
 	return 0;
 
 unmap_tx_page:
-	dma_unmap_single(dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
+	dma_unmap_single(tx_dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
 free_rx_page:
 	free_page((unsigned long)p->rx_dma_page);
 free_tx_page:
@@ -1062,8 +1066,10 @@ static void sh_msiof_release_dma(struct sh_msiof_spi_priv *p)
 		return;
 
 	dev = &p->pdev->dev;
-	dma_unmap_single(dev, p->rx_dma_addr, PAGE_SIZE, DMA_FROM_DEVICE);
-	dma_unmap_single(dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
+	dma_unmap_single(master->dma_rx->device->dev, p->rx_dma_addr,
+			 PAGE_SIZE, DMA_FROM_DEVICE);
+	dma_unmap_single(master->dma_tx->device->dev, p->tx_dma_addr,
+			 PAGE_SIZE, DMA_TO_DEVICE);
 	free_page((unsigned long)p->rx_dma_page);
 	free_page((unsigned long)p->tx_dma_page);
 	dma_release_channel(master->dma_rx);
-- 
1.9.1

[PATCH v2 2/2] spi: sh-msiof: Use correct device for DMA mapping with IOMMU

[Geert Uytterhoeven]

To function correctly in the presence of an IOMMU, the DMA buffers must be
mapped using the DMA channel's device instead of the MSIOF platform
device's device.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - Use "dma_chan.device->dev" instead of "dma_chan.dev->device",
  - Also fix calls to dma_unmap_single(), dma_mapping_error(), and
    dma_sync_single_for_*()".
---
 drivers/spi/spi-sh-msiof.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 9922ed3a4441..6f449b24704a 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -644,8 +644,8 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx,
 
 	if (tx) {
 		ier_bits |= IER_TDREQE | IER_TDMAE;
-		dma_sync_single_for_device(&p->pdev->dev, p->tx_dma_addr, len,
-					   DMA_TO_DEVICE);
+		dma_sync_single_for_device(p->master->dma_tx->device->dev,
+					   p->tx_dma_addr, len, DMA_TO_DEVICE);
 		desc_tx = dmaengine_prep_slave_single(p->master->dma_tx,
 					p->tx_dma_addr, len, DMA_TO_DEVICE,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
@@ -716,7 +716,8 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx,
 	}
 
 	if (rx)
-		dma_sync_single_for_cpu(&p->pdev->dev, p->rx_dma_addr, len,
+		dma_sync_single_for_cpu(p->master->dma_rx->device->dev,
+					p->rx_dma_addr, len,
 					DMA_FROM_DEVICE);
 
 	return 0;
@@ -996,6 +997,7 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p)
 	const struct sh_msiof_spi_info *info = dev_get_platdata(dev);
 	const struct resource *res;
 	struct spi_master *master;
+	struct device *tx_dev, *rx_dev;
 
 	if (!info || !info->dma_tx_id || !info->dma_rx_id)
 		return 0;	/* The driver assumes no error */
@@ -1026,21 +1028,23 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p)
 	if (!p->rx_dma_page)
 		goto free_tx_page;
 
-	p->tx_dma_addr = dma_map_single(dev, p->tx_dma_page, PAGE_SIZE,
+	tx_dev = master->dma_tx->device->dev;
+	p->tx_dma_addr = dma_map_single(tx_dev, p->tx_dma_page, PAGE_SIZE,
 					DMA_TO_DEVICE);
-	if (dma_mapping_error(dev, p->tx_dma_addr))
+	if (dma_mapping_error(tx_dev, p->tx_dma_addr))
 		goto free_rx_page;
 
-	p->rx_dma_addr = dma_map_single(dev, p->rx_dma_page, PAGE_SIZE,
+	rx_dev = master->dma_rx->device->dev;
+	p->rx_dma_addr = dma_map_single(rx_dev, p->rx_dma_page, PAGE_SIZE,
 					DMA_FROM_DEVICE);
-	if (dma_mapping_error(dev, p->rx_dma_addr))
+	if (dma_mapping_error(rx_dev, p->rx_dma_addr))
 		goto unmap_tx_page;
 
 	dev_info(dev, "DMA available");
 	return 0;
 
 unmap_tx_page:
-	dma_unmap_single(dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
+	dma_unmap_single(tx_dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
 free_rx_page:
 	free_page((unsigned long)p->rx_dma_page);
 free_tx_page:
@@ -1062,8 +1066,10 @@ static void sh_msiof_release_dma(struct sh_msiof_spi_priv *p)
 		return;
 
 	dev = &p->pdev->dev;
-	dma_unmap_single(dev, p->rx_dma_addr, PAGE_SIZE, DMA_FROM_DEVICE);
-	dma_unmap_single(dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
+	dma_unmap_single(master->dma_rx->device->dev, p->rx_dma_addr,
+			 PAGE_SIZE, DMA_FROM_DEVICE);
+	dma_unmap_single(master->dma_tx->device->dev, p->tx_dma_addr,
+			 PAGE_SIZE, DMA_TO_DEVICE);
 	free_page((unsigned long)p->rx_dma_page);
 	free_page((unsigned long)p->tx_dma_page);
 	dma_release_channel(master->dma_rx);
-- 
1.9.1

Re: [PATCH v2 2/2] spi: sh-msiof: Use correct device for DMA mapping with IOMMU

[Vinod Koul]

On Fri, Jul 11, 2014 at 05:56:22PM +0200, Geert Uytterhoeven wrote:
> To function correctly in the presence of an IOMMU, the DMA buffers must be
> mapped using the DMA channel's device instead of the MSIOF platform
> device's device.

Acked-by: Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

I think Mark should pick this one up, I will pick the Documentation update
thru slave-dmanegine tree

-- 
~Vinod
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
> ---
> v2:
>   - Use "dma_chan.device->dev" instead of "dma_chan.dev->device",
>   - Also fix calls to dma_unmap_single(), dma_mapping_error(), and
>     dma_sync_single_for_*()".
> ---
>  drivers/spi/spi-sh-msiof.c | 26 ++++++++++++++++----------
>  1 file changed, 16 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
> index 9922ed3a4441..6f449b24704a 100644
> --- a/drivers/spi/spi-sh-msiof.c
> +++ b/drivers/spi/spi-sh-msiof.c
> @@ -644,8 +644,8 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx,
>  
>  	if (tx) {
>  		ier_bits |= IER_TDREQE | IER_TDMAE;
> -		dma_sync_single_for_device(&p->pdev->dev, p->tx_dma_addr, len,
> -					   DMA_TO_DEVICE);
> +		dma_sync_single_for_device(p->master->dma_tx->device->dev,
> +					   p->tx_dma_addr, len, DMA_TO_DEVICE);
>  		desc_tx = dmaengine_prep_slave_single(p->master->dma_tx,
>  					p->tx_dma_addr, len, DMA_TO_DEVICE,
>  					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> @@ -716,7 +716,8 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx,
>  	}
>  
>  	if (rx)
> -		dma_sync_single_for_cpu(&p->pdev->dev, p->rx_dma_addr, len,
> +		dma_sync_single_for_cpu(p->master->dma_rx->device->dev,
> +					p->rx_dma_addr, len,
>  					DMA_FROM_DEVICE);
>  
>  	return 0;
> @@ -996,6 +997,7 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p)
>  	const struct sh_msiof_spi_info *info = dev_get_platdata(dev);
>  	const struct resource *res;
>  	struct spi_master *master;
> +	struct device *tx_dev, *rx_dev;
>  
>  	if (!info || !info->dma_tx_id || !info->dma_rx_id)
>  		return 0;	/* The driver assumes no error */
> @@ -1026,21 +1028,23 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p)
>  	if (!p->rx_dma_page)
>  		goto free_tx_page;
>  
> -	p->tx_dma_addr = dma_map_single(dev, p->tx_dma_page, PAGE_SIZE,
> +	tx_dev = master->dma_tx->device->dev;
> +	p->tx_dma_addr = dma_map_single(tx_dev, p->tx_dma_page, PAGE_SIZE,
>  					DMA_TO_DEVICE);
> -	if (dma_mapping_error(dev, p->tx_dma_addr))
> +	if (dma_mapping_error(tx_dev, p->tx_dma_addr))
>  		goto free_rx_page;
>  
> -	p->rx_dma_addr = dma_map_single(dev, p->rx_dma_page, PAGE_SIZE,
> +	rx_dev = master->dma_rx->device->dev;
> +	p->rx_dma_addr = dma_map_single(rx_dev, p->rx_dma_page, PAGE_SIZE,
>  					DMA_FROM_DEVICE);
> -	if (dma_mapping_error(dev, p->rx_dma_addr))
> +	if (dma_mapping_error(rx_dev, p->rx_dma_addr))
>  		goto unmap_tx_page;
>  
>  	dev_info(dev, "DMA available");
>  	return 0;
>  
>  unmap_tx_page:
> -	dma_unmap_single(dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
> +	dma_unmap_single(tx_dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
>  free_rx_page:
>  	free_page((unsigned long)p->rx_dma_page);
>  free_tx_page:
> @@ -1062,8 +1066,10 @@ static void sh_msiof_release_dma(struct sh_msiof_spi_priv *p)
>  		return;
>  
>  	dev = &p->pdev->dev;
> -	dma_unmap_single(dev, p->rx_dma_addr, PAGE_SIZE, DMA_FROM_DEVICE);
> -	dma_unmap_single(dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
> +	dma_unmap_single(master->dma_rx->device->dev, p->rx_dma_addr,
> +			 PAGE_SIZE, DMA_FROM_DEVICE);
> +	dma_unmap_single(master->dma_tx->device->dev, p->tx_dma_addr,
> +			 PAGE_SIZE, DMA_TO_DEVICE);
>  	free_page((unsigned long)p->rx_dma_page);
>  	free_page((unsigned long)p->tx_dma_page);
>  	dma_release_channel(master->dma_rx);
> -- 
> 1.9.1
> 

-- 
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 2/2] spi: sh-msiof: Use correct device for DMA mapping with IOMMU

[Vinod Koul]

On Fri, Jul 11, 2014 at 05:56:22PM +0200, Geert Uytterhoeven wrote:
> To function correctly in the presence of an IOMMU, the DMA buffers must be
> mapped using the DMA channel's device instead of the MSIOF platform
> device's device.

Acked-by: Vinod Koul <vinod.koul@intel.com>

I think Mark should pick this one up, I will pick the Documentation update
thru slave-dmanegine tree

-- 
~Vinod
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v2:
>   - Use "dma_chan.device->dev" instead of "dma_chan.dev->device",
>   - Also fix calls to dma_unmap_single(), dma_mapping_error(), and
>     dma_sync_single_for_*()".
> ---
>  drivers/spi/spi-sh-msiof.c | 26 ++++++++++++++++----------
>  1 file changed, 16 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
> index 9922ed3a4441..6f449b24704a 100644
> --- a/drivers/spi/spi-sh-msiof.c
> +++ b/drivers/spi/spi-sh-msiof.c
> @@ -644,8 +644,8 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx,
>  
>  	if (tx) {
>  		ier_bits |= IER_TDREQE | IER_TDMAE;
> -		dma_sync_single_for_device(&p->pdev->dev, p->tx_dma_addr, len,
> -					   DMA_TO_DEVICE);
> +		dma_sync_single_for_device(p->master->dma_tx->device->dev,
> +					   p->tx_dma_addr, len, DMA_TO_DEVICE);
>  		desc_tx = dmaengine_prep_slave_single(p->master->dma_tx,
>  					p->tx_dma_addr, len, DMA_TO_DEVICE,
>  					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> @@ -716,7 +716,8 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx,
>  	}
>  
>  	if (rx)
> -		dma_sync_single_for_cpu(&p->pdev->dev, p->rx_dma_addr, len,
> +		dma_sync_single_for_cpu(p->master->dma_rx->device->dev,
> +					p->rx_dma_addr, len,
>  					DMA_FROM_DEVICE);
>  
>  	return 0;
> @@ -996,6 +997,7 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p)
>  	const struct sh_msiof_spi_info *info = dev_get_platdata(dev);
>  	const struct resource *res;
>  	struct spi_master *master;
> +	struct device *tx_dev, *rx_dev;
>  
>  	if (!info || !info->dma_tx_id || !info->dma_rx_id)
>  		return 0;	/* The driver assumes no error */
> @@ -1026,21 +1028,23 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p)
>  	if (!p->rx_dma_page)
>  		goto free_tx_page;
>  
> -	p->tx_dma_addr = dma_map_single(dev, p->tx_dma_page, PAGE_SIZE,
> +	tx_dev = master->dma_tx->device->dev;
> +	p->tx_dma_addr = dma_map_single(tx_dev, p->tx_dma_page, PAGE_SIZE,
>  					DMA_TO_DEVICE);
> -	if (dma_mapping_error(dev, p->tx_dma_addr))
> +	if (dma_mapping_error(tx_dev, p->tx_dma_addr))
>  		goto free_rx_page;
>  
> -	p->rx_dma_addr = dma_map_single(dev, p->rx_dma_page, PAGE_SIZE,
> +	rx_dev = master->dma_rx->device->dev;
> +	p->rx_dma_addr = dma_map_single(rx_dev, p->rx_dma_page, PAGE_SIZE,
>  					DMA_FROM_DEVICE);
> -	if (dma_mapping_error(dev, p->rx_dma_addr))
> +	if (dma_mapping_error(rx_dev, p->rx_dma_addr))
>  		goto unmap_tx_page;
>  
>  	dev_info(dev, "DMA available");
>  	return 0;
>  
>  unmap_tx_page:
> -	dma_unmap_single(dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
> +	dma_unmap_single(tx_dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
>  free_rx_page:
>  	free_page((unsigned long)p->rx_dma_page);
>  free_tx_page:
> @@ -1062,8 +1066,10 @@ static void sh_msiof_release_dma(struct sh_msiof_spi_priv *p)
>  		return;
>  
>  	dev = &p->pdev->dev;
> -	dma_unmap_single(dev, p->rx_dma_addr, PAGE_SIZE, DMA_FROM_DEVICE);
> -	dma_unmap_single(dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
> +	dma_unmap_single(master->dma_rx->device->dev, p->rx_dma_addr,
> +			 PAGE_SIZE, DMA_FROM_DEVICE);
> +	dma_unmap_single(master->dma_tx->device->dev, p->tx_dma_addr,
> +			 PAGE_SIZE, DMA_TO_DEVICE);
>  	free_page((unsigned long)p->rx_dma_page);
>  	free_page((unsigned long)p->tx_dma_page);
>  	dma_release_channel(master->dma_rx);
> -- 
> 1.9.1
> 

-- 

Re: [PATCH v2 2/2] spi: sh-msiof: Use correct device for DMA mapping with IOMMU

[Vinod Koul]

On Fri, Jul 11, 2014 at 05:56:22PM +0200, Geert Uytterhoeven wrote:
> To function correctly in the presence of an IOMMU, the DMA buffers must be
> mapped using the DMA channel's device instead of the MSIOF platform
> device's device.

Acked-by: Vinod Koul <vinod.koul@intel.com>

I think Mark should pick this one up, I will pick the Documentation update
thru slave-dmanegine tree

-- 
~Vinod
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v2:
>   - Use "dma_chan.device->dev" instead of "dma_chan.dev->device",
>   - Also fix calls to dma_unmap_single(), dma_mapping_error(), and
>     dma_sync_single_for_*()".
> ---
>  drivers/spi/spi-sh-msiof.c | 26 ++++++++++++++++----------
>  1 file changed, 16 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
> index 9922ed3a4441..6f449b24704a 100644
> --- a/drivers/spi/spi-sh-msiof.c
> +++ b/drivers/spi/spi-sh-msiof.c
> @@ -644,8 +644,8 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx,
>  
>  	if (tx) {
>  		ier_bits |= IER_TDREQE | IER_TDMAE;
> -		dma_sync_single_for_device(&p->pdev->dev, p->tx_dma_addr, len,
> -					   DMA_TO_DEVICE);
> +		dma_sync_single_for_device(p->master->dma_tx->device->dev,
> +					   p->tx_dma_addr, len, DMA_TO_DEVICE);
>  		desc_tx = dmaengine_prep_slave_single(p->master->dma_tx,
>  					p->tx_dma_addr, len, DMA_TO_DEVICE,
>  					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> @@ -716,7 +716,8 @@ static int sh_msiof_dma_once(struct sh_msiof_spi_priv *p, const void *tx,
>  	}
>  
>  	if (rx)
> -		dma_sync_single_for_cpu(&p->pdev->dev, p->rx_dma_addr, len,
> +		dma_sync_single_for_cpu(p->master->dma_rx->device->dev,
> +					p->rx_dma_addr, len,
>  					DMA_FROM_DEVICE);
>  
>  	return 0;
> @@ -996,6 +997,7 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p)
>  	const struct sh_msiof_spi_info *info = dev_get_platdata(dev);
>  	const struct resource *res;
>  	struct spi_master *master;
> +	struct device *tx_dev, *rx_dev;
>  
>  	if (!info || !info->dma_tx_id || !info->dma_rx_id)
>  		return 0;	/* The driver assumes no error */
> @@ -1026,21 +1028,23 @@ static int sh_msiof_request_dma(struct sh_msiof_spi_priv *p)
>  	if (!p->rx_dma_page)
>  		goto free_tx_page;
>  
> -	p->tx_dma_addr = dma_map_single(dev, p->tx_dma_page, PAGE_SIZE,
> +	tx_dev = master->dma_tx->device->dev;
> +	p->tx_dma_addr = dma_map_single(tx_dev, p->tx_dma_page, PAGE_SIZE,
>  					DMA_TO_DEVICE);
> -	if (dma_mapping_error(dev, p->tx_dma_addr))
> +	if (dma_mapping_error(tx_dev, p->tx_dma_addr))
>  		goto free_rx_page;
>  
> -	p->rx_dma_addr = dma_map_single(dev, p->rx_dma_page, PAGE_SIZE,
> +	rx_dev = master->dma_rx->device->dev;
> +	p->rx_dma_addr = dma_map_single(rx_dev, p->rx_dma_page, PAGE_SIZE,
>  					DMA_FROM_DEVICE);
> -	if (dma_mapping_error(dev, p->rx_dma_addr))
> +	if (dma_mapping_error(rx_dev, p->rx_dma_addr))
>  		goto unmap_tx_page;
>  
>  	dev_info(dev, "DMA available");
>  	return 0;
>  
>  unmap_tx_page:
> -	dma_unmap_single(dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
> +	dma_unmap_single(tx_dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
>  free_rx_page:
>  	free_page((unsigned long)p->rx_dma_page);
>  free_tx_page:
> @@ -1062,8 +1066,10 @@ static void sh_msiof_release_dma(struct sh_msiof_spi_priv *p)
>  		return;
>  
>  	dev = &p->pdev->dev;
> -	dma_unmap_single(dev, p->rx_dma_addr, PAGE_SIZE, DMA_FROM_DEVICE);
> -	dma_unmap_single(dev, p->tx_dma_addr, PAGE_SIZE, DMA_TO_DEVICE);
> +	dma_unmap_single(master->dma_rx->device->dev, p->rx_dma_addr,
> +			 PAGE_SIZE, DMA_FROM_DEVICE);
> +	dma_unmap_single(master->dma_tx->device->dev, p->tx_dma_addr,
> +			 PAGE_SIZE, DMA_TO_DEVICE);
>  	free_page((unsigned long)p->rx_dma_page);
>  	free_page((unsigned long)p->tx_dma_page);
>  	dma_release_channel(master->dma_rx);
> -- 
> 1.9.1
> 

-- 

Re: [PATCH v2 1/2] dmaengine: Clarify device parameter for dma_sync_*_for_*()

[Vinod Koul]

On Fri, Jul 11, 2014 at 05:56:21PM +0200, Geert Uytterhoeven wrote:
> Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
> ---
> v2:
>   - New
> ---
>  Documentation/dmaengine.txt | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt
> index 879b6e31e2da..87d3f192e160 100644
> --- a/Documentation/dmaengine.txt
> +++ b/Documentation/dmaengine.txt
> @@ -100,8 +100,10 @@ The slave DMA usage consists of following steps:
>     The peripheral driver is expected to have mapped the scatterlist for
>     the DMA operation prior to calling device_prep_slave_sg, and must
>     keep the scatterlist mapped until the DMA operation has completed.
> -   The scatterlist must be mapped using the DMA struct device.  So,
> -   normal setup should look like this:
> +   The scatterlist must be mapped using the DMA struct device.
> +   If a mapping needs to be synchronized later, dma_sync_*_for_*() must be
> +   called using the DMA struct device, too.
> +   So, normal setup should look like this:
>  
>  	nr_sg = dma_map_sg(chan->device->dev, sgl, sg_len);
>  	if (nr_sg == 0)
> -- 
> 1.9.1
> 
Applied, thanks

-- 
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/2] dmaengine: Clarify device parameter for dma_sync_*_for_*()

[Vinod Koul]

On Fri, Jul 11, 2014 at 05:56:21PM +0200, Geert Uytterhoeven wrote:
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v2:
>   - New
> ---
>  Documentation/dmaengine.txt | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt
> index 879b6e31e2da..87d3f192e160 100644
> --- a/Documentation/dmaengine.txt
> +++ b/Documentation/dmaengine.txt
> @@ -100,8 +100,10 @@ The slave DMA usage consists of following steps:
>     The peripheral driver is expected to have mapped the scatterlist for
>     the DMA operation prior to calling device_prep_slave_sg, and must
>     keep the scatterlist mapped until the DMA operation has completed.
> -   The scatterlist must be mapped using the DMA struct device.  So,
> -   normal setup should look like this:
> +   The scatterlist must be mapped using the DMA struct device.
> +   If a mapping needs to be synchronized later, dma_sync_*_for_*() must be
> +   called using the DMA struct device, too.
> +   So, normal setup should look like this:
>  
>  	nr_sg = dma_map_sg(chan->device->dev, sgl, sg_len);
>  	if (nr_sg = 0)
> -- 
> 1.9.1
> 
Applied, thanks

-- 
~Vinod

Re: [PATCH v2 1/2] dmaengine: Clarify device parameter for dma_sync_*_for_*()

[Vinod Koul]

On Fri, Jul 11, 2014 at 05:56:21PM +0200, Geert Uytterhoeven wrote:
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v2:
>   - New
> ---
>  Documentation/dmaengine.txt | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt
> index 879b6e31e2da..87d3f192e160 100644
> --- a/Documentation/dmaengine.txt
> +++ b/Documentation/dmaengine.txt
> @@ -100,8 +100,10 @@ The slave DMA usage consists of following steps:
>     The peripheral driver is expected to have mapped the scatterlist for
>     the DMA operation prior to calling device_prep_slave_sg, and must
>     keep the scatterlist mapped until the DMA operation has completed.
> -   The scatterlist must be mapped using the DMA struct device.  So,
> -   normal setup should look like this:
> +   The scatterlist must be mapped using the DMA struct device.
> +   If a mapping needs to be synchronized later, dma_sync_*_for_*() must be
> +   called using the DMA struct device, too.
> +   So, normal setup should look like this:
>  
>  	nr_sg = dma_map_sg(chan->device->dev, sgl, sg_len);
>  	if (nr_sg == 0)
> -- 
> 1.9.1
> 
Applied, thanks

-- 
~Vinod