From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-mpc85xx master
Date: Mon, 28 Jul 2014 15:03:05 -0400 [thread overview]
Message-ID: <20140728190305.GF1847@bill-the-cat> (raw)
In-Reply-To: <53D018CF.5060603@freescale.com>
On Wed, Jul 23, 2014 at 01:19:27PM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit fbe79a17fddb7f0b11aa15b9c93e9a4a26165ed8:
>
> m68k: define __kernel_size_t as unsinged int again (2014-07-22 09:46:50 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx.git master
>
> for you to fetch changes up to fb5368789a45ca5ee4396cbbf563a8f16ab24f9c:
>
> board/freescale: use generic board architecture for t2080qds and t2080rdb
> (2014-07-23 12:40:30 -0700)
>
> ----------------------------------------------------------------
> Lijun Pan (1):
> powerpc/mpc85xx: Remove P1023 RDS support
>
> Prabhakar Kushwaha (3):
> driver/nand:Define MAX_BANKS same as SoC defined for IFC
> driver/nand: Update SRAM initialize logic for IFC.
> driver/nand: Add support of 16K SRAM for IFC 2.0
>
> Rotariu Marian-Cristian (1):
> net/fm: call fm_port_to_index() with proper checks
>
> Sandeep Singh (1):
> powerpc/mpc85xx: Removed support for G4060
>
> Shaohui Xie (2):
> powerpc/ifc: fix invalid CSn FTIM2.TCH setting
> powerpc/t4240qds: fix offset of serdes when checking reference clock
>
> Shaveta Leekha (1):
> powerpc/chassis2: Configure and enable L2 cache for PPC clusters only
>
> Shengzhou Liu (4):
> powerpc/85xx: add fdt_fixup_dma3
> board/t2080qds: enable sst and eon spi flash for nor boot
> powerpc/t1040: update i2c for t1040qds and t104xrdb
> board/freescale: use generic board architecture for t2080qds and t2080rdb
>
> Tang Yuantian (1):
> mpc85xx/t104x: Enable L2 and CPC cache when resume
>
> York Sun (3):
> driver/ddr: Fix DDR4 driver for ARM
> powerpc/mpc85xx: Check return value of find_tlb_idx
> driver/ddr: Fix DDR register timing_cfg_8
>
> Zang Roy-R61911 (1):
> fsl/pcie: Change 'no link' to 'undetermined' for pcie endpoint
>
> Zhao Qiang (1):
> qe: move immap_qe.h from arch directory into common directory
>
> vijay rai (1):
> powerpc/t1040qds: Initialize EPHY2 clock to RGMII only
>
> arch/arm/include/asm/arch-fsl-lsch3/config.h | 4 +
> arch/arm/include/asm/io.h | 1 +
> arch/powerpc/cpu/mpc83xx/cpu.c | 2 +-
> arch/powerpc/cpu/mpc83xx/fdt.c | 2 +-
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 166 +++----
> arch/powerpc/cpu/mpc85xx/fdt.c | 47 ++
> arch/powerpc/cpu/mpc8xxx/cpu.c | 1 -
> arch/powerpc/include/asm/cache.h | 6 +
> arch/powerpc/include/asm/immap_85xx.h | 6 +
> arch/powerpc/include/asm/io.h | 3 +
> arch/powerpc/include/asm/processor.h | 1 -
> arch/powerpc/lib/board.c | 5 +
> board/exmeritus/hww1u1a/hww1u1a.c | 12 +-
> board/freescale/b4860qds/b4860qds.c | 12 +-
> board/freescale/bsc9132qds/bsc9132qds.c | 12 +-
> board/freescale/c29xpcie/c29xpcie.c | 12 +-
> board/freescale/corenet_ds/corenet_ds.c | 12 +-
> board/freescale/mpc8536ds/mpc8536ds.c | 12 +-
> board/freescale/mpc8572ds/mpc8572ds.c | 12 +-
> board/freescale/p1010rdb/p1010rdb.c | 12 +-
> board/freescale/p1022ds/p1022ds.c | 12 +-
> board/freescale/p1023rdb/p1023rdb.c | 12 +-
> board/freescale/p1023rds/Makefile | 9 -
> board/freescale/p1023rds/README | 101 -----
> board/freescale/p1023rds/bcsr.h | 49 --
> board/freescale/p1023rds/law.c | 19 -
> board/freescale/p1023rds/p1023rds.c | 191 --------
> board/freescale/p1023rds/tlb.c | 100 ----
> board/freescale/p1_p2_rdb/p1_p2_rdb.c | 12 +-
> board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 12 +-
> board/freescale/p1_twr/p1_twr.c | 12 +-
> board/freescale/p2020ds/p2020ds.c | 12 +-
> board/freescale/p2041rdb/p2041rdb.c | 12 +-
> board/freescale/t1040qds/eth.c | 4 +-
> board/freescale/t1040qds/t1040qds.c | 12 +-
> board/freescale/t1040qds/t1040qds_qixis.h | 4 +
> board/freescale/t104xrdb/t104xrdb.c | 12 +-
> board/freescale/t208xqds/t208xqds.c | 12 +-
> board/freescale/t208xrdb/t208xrdb.c | 13 +-
> board/freescale/t4qds/t4240emu.c | 12 +-
> board/freescale/t4qds/t4240qds.c | 22 +-
> board/freescale/t4rdb/t4240rdb.c | 12 +-
> boards.cfg | 1 -
> drivers/bootcount/bootcount.c | 2 +-
> drivers/ddr/fsl/ctrl_regs.c | 3 +
> drivers/ddr/fsl/fsl_ddr_gen4.c | 7 +-
> drivers/mtd/nand/fsl_ifc_nand.c | 45 +-
> drivers/mtd/nand/fsl_ifc_spl.c | 6 +-
> drivers/net/fm/fm.h | 3 +-
> drivers/net/fm/init.c | 6 +
> drivers/pci/fsl_pci_init.c | 10 +-
> drivers/qe/qe.c | 2 +-
> drivers/qe/uccf.c | 2 +-
> drivers/qe/uccf.h | 2 +-
> drivers/qe/uec.c | 2 +-
> drivers/qe/uec_phy.c | 2 +-
> include/configs/B4860QDS.h | 2 +-
> include/configs/BSC9132QDS.h | 2 +-
> include/configs/C29XPCIE.h | 2 +-
> include/configs/P1010RDB.h | 2 +-
> include/configs/P1023RDS.h | 479 --------------------
> include/configs/T1040QDS.h | 10 +-
> include/configs/T104xRDB.h | 12 +-
> include/configs/T208xQDS.h | 4 +-
> include/configs/T208xRDB.h | 4 +-
> include/configs/T4240QDS.h | 2 +-
> include/fsl_ifc.h | 4 +
> .../include/asm => include/linux}/immap_qe.h | 0
> include/post.h | 2 +-
> 69 files changed, 481 insertions(+), 1133 deletions(-)
> delete mode 100644 board/freescale/p1023rds/Makefile
> delete mode 100644 board/freescale/p1023rds/README
> delete mode 100644 board/freescale/p1023rds/bcsr.h
> delete mode 100644 board/freescale/p1023rds/law.c
> delete mode 100644 board/freescale/p1023rds/p1023rds.c
> delete mode 100644 board/freescale/p1023rds/tlb.c
> delete mode 100644 include/configs/P1023RDS.h
> rename {arch/powerpc/include/asm => include/linux}/immap_qe.h (100%)
Sorry, got lost in my inbox, applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140728/11c70584/attachment.pgp>
next prev parent reply other threads:[~2014-07-28 19:03 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-23 20:19 [U-Boot] Please pull u-boot-mpc85xx master York Sun
2014-07-28 19:03 ` Tom Rini [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-01-24 16:25 York Sun
2019-01-25 15:16 ` Tom Rini
2018-10-30 19:21 York Sun
2018-10-31 14:44 ` Tom Rini
2018-09-28 15:35 York Sun
2018-09-30 2:27 ` Tom Rini
2018-07-31 17:25 York Sun
2018-08-01 15:05 ` Tom Rini
2018-07-31 17:12 York Sun
2018-07-31 17:16 ` York Sun
2017-12-08 16:59 York Sun
2017-12-09 1:35 ` Tom Rini
2017-06-13 17:02 York Sun
2017-06-15 13:01 ` Tom Rini
2017-02-01 16:19 york sun
2017-02-02 3:20 ` Tom Rini
2017-01-25 5:26 york sun
2017-01-26 3:00 ` Tom Rini
2016-12-20 17:15 york sun
2016-12-22 2:30 ` Tom Rini
2016-12-04 17:02 york sun
2016-12-04 23:00 ` Tom Rini
2016-11-29 22:18 york sun
2016-11-30 14:12 ` Tom Rini
2016-10-15 17:02 york sun
2016-10-18 0:08 ` Tom Rini
2016-07-22 0:17 york sun
2016-07-23 0:09 ` Tom Rini
2016-07-25 18:52 ` Scott Wood
2016-07-25 19:02 ` york sun
2016-06-04 16:03 York Sun
2016-06-06 11:16 ` Tom Rini
2016-05-25 3:37 York Sun
2016-05-26 15:49 ` Tom Rini
2016-04-08 22:45 York Sun
2016-04-11 15:00 ` Tom Rini
2016-02-26 18:51 york sun
2016-02-26 19:09 ` Tom Rini
2016-01-25 20:49 york sun
2016-01-26 22:44 ` Tom Rini
[not found] <568BFBF0.3040605@freescale.com>
2016-01-05 18:21 ` York Sun
[not found] <563A9399.80500@freescale.com>
2015-11-04 23:45 ` Tom Rini
2015-11-02 21:06 York Sun
2015-11-02 23:17 ` Tom Rini
2015-09-02 15:26 York Sun
2015-09-02 21:58 ` Tom Rini
2015-07-31 16:00 York Sun
2015-08-01 14:47 ` Tom Rini
2015-05-05 16:55 York Sun
2015-05-05 23:59 ` Tom Rini
2015-04-20 21:05 York Sun
2015-04-22 15:52 ` Tom Rini
2015-03-05 20:20 York Sun
2015-03-06 15:43 ` Tom Rini
2015-01-23 0:49 York Sun
2015-01-23 21:57 ` Tom Rini
2014-12-16 17:24 York Sun
2014-12-17 0:45 ` Tom Rini
2014-12-05 16:10 York Sun
2014-12-08 21:41 ` Tom Rini
2014-06-05 21:30 York Sun
2014-06-05 22:50 ` Tom Rini
2014-05-16 22:12 York Sun
2014-05-19 12:47 ` Tom Rini
2014-04-23 22:45 York Sun
2014-04-25 19:44 ` Tom Rini
2014-02-03 17:04 York Sun
2014-02-04 22:05 ` Tom Rini
2014-01-03 23:57 York Sun
2014-01-07 17:16 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140728190305.GF1847@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.