[U-Boot] Please pull u-boot-mpc85xx master

[York Sun <yorksun@freescale.com>]

Tom,

The following changes since commit a61047370d0b73ab886c5863e952695b5ee0d75b:

  ARM: at91: sama5: change the environment address to 0x6000 (2015-11-01
22:02:16 +0100)

are available in the git repository at:

  git://git.denx.de/u-boot-mpc85xx.git master

for you to fetch changes up to 96d59e9d6aa74e35c63dc74da10e41f8ba0f6de4:

  mpc85xx/t2081: enable parsing DDR ratio for T2081 rev1.1 (2015-11-02 08:51:50
-0800)

----------------------------------------------------------------
Codrin Ciubotariu (1):
      T104xD4RDB: Fix PHY address for PHY connected to FM1 at DTSEC3

Shaohui Xie (1):
      Powerpc: eSDHC: expand a fix to T4160

Shengzhou Liu (1):
      mpc85xx/t2081: enable parsing DDR ratio for T2081 rev1.1

Yangbo Lu (4):
      mmc: fsl_esdhc: enable dat[4:7] for eMMC4.5 Adapter Card
      powerpc/t1040qds: enable adapter card type identification support
      powerpc/t1040qds: enable peripheral clock for eSDHC
      mmc: fsl_esdhc: enable EVDD automatic control for SD/MMC Legacy Adapter Card

Zhao Qiang (1):
      t1040d4rdb: assign muxed pins to qe-tdm when set hwconfig qe-tdm

 arch/powerpc/cpu/mpc85xx/fdt.c      |   11 +++++++++++
 arch/powerpc/cpu/mpc85xx/speed.c    |    3 ++-
 arch/powerpc/include/asm/fsl_fdt.h  |   11 +++++++++++
 board/freescale/common/qixis.h      |    5 +++++
 board/freescale/t104xrdb/cpld.h     |    1 +
 board/freescale/t104xrdb/t104xrdb.c |   10 ++++++++++
 drivers/mmc/fsl_esdhc.c             |    9 ++++++++-
 include/configs/T1040QDS.h          |    2 ++
 include/configs/T104xRDB.h          |    4 +++-
 9 files changed, 53 insertions(+), 3 deletions(-)
 create mode 100644 arch/powerpc/include/asm/fsl_fdt.h

Thanks.

York