From: mturquette@linaro.org (Mike Turquette)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/15] Add Flexgen Clock support
Date: Mon, 28 Jul 2014 22:44:36 -0700 [thread overview]
Message-ID: <20140729054436.4906.44690@quantum> (raw)
In-Reply-To: <1405437631-23623-1-git-send-email-gabriel.fernandez@linaro.org>
Quoting Gabriel FERNANDEZ (2014-07-15 08:20:16)
> Changes in v3:
> - Change commit message
> - Remove uncessary (void *) cast
> - add a block diagram for flexgen clock binding documentation
>
> Changes in v2:
> - use static const for clkgen_pll_data and stm_fs tables (from
> Peter Griffin review)
> - add 326 and 333 Mhz frequencies
> - cosmetic correction in st,clkgen-vcc.txt
> - use of kcalloc instead of kzalloc in drivers/clk/st/clk-flexgen.c
>
> The goal of this series is to add Flexgen clock support to ST SoCs.
>
> A Flexgen clock is composed by:
> - a clock cross bar (represented by a mux element)
> - a pre and final dividers (represented by a divider and gate elements)
Applied to clk-next! I performed 's/drivers: //' on the $SUBJECT for
most of the patches.
Regards,
Mike
>
> Tested on B2120 board.
>
> Gabriel Fernandez (15):
> clk: st: Update ST clock binding documentation
> drivers: clk: st: use static const for stm_fs tables
> drivers: clk: st: use static const for clkgen_pll_data tables
> drivers: clk: st: Remove uncessary (void *) cast
> clk: st: Adds Flexgen clock binding
> drivers: clk: st: STiH407: Support for Flexgen Clocks
> drivers: clk: st: STiH407: Support for A9 MUX Clocks
> drivers: clk: st: STiH407: Support for clockgenA0
> drivers: clk: st: Add polarity bit indication
> drivers: clk: st: Add quadfs reset handling
> drivers: clk: st: STiH407: Support for clockgenC0
> drivers: clk: st: STiH407: Support for clockgenD0/D2/D3
> drivers: clk: st: STiH407: Support for clockgenA9
> drivers: clk: st: Update frequency tables for fs660c32 and fs432c65
> drivers: clk: st: Use round to closest divider flag
>
> .../bindings/clock/st/st,clkgen-divmux.txt | 28 +-
> .../devicetree/bindings/clock/st/st,clkgen-mux.txt | 6 +-
> .../devicetree/bindings/clock/st/st,clkgen-pll.txt | 17 +-
> .../bindings/clock/st/st,clkgen-prediv.txt | 8 +-
> .../devicetree/bindings/clock/st/st,clkgen-vcc.txt | 34 ++-
> .../devicetree/bindings/clock/st/st,clkgen.txt | 59 ++--
> .../devicetree/bindings/clock/st/st,flexgen.txt | 119 ++++++++
> .../devicetree/bindings/clock/st/st,quadfs.txt | 15 +-
> drivers/clk/st/Makefile | 2 +-
> drivers/clk/st/clk-flexgen.c | 331 +++++++++++++++++++++
> drivers/clk/st/clkgen-fsyn.c | 223 +++++++++++---
> drivers/clk/st/clkgen-mux.c | 12 +-
> drivers/clk/st/clkgen-pll.c | 94 +++++-
> 13 files changed, 828 insertions(+), 120 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/st/st,flexgen.txt
> create mode 100644 drivers/clk/st/clk-flexgen.c
>
> --
> 1.9.1
>
WARNING: multiple messages have this Message-ID (diff)
From: Mike Turquette <mturquette@linaro.org>
To: Gabriel FERNANDEZ <gabriel.fernandez@st.com>,
robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, kernel@stlinux.com,
Lee Jones <lee.jones@linaro.org>,
Gabriel Fernandez <gabriel.fernandez@linaro.org>
Subject: Re: [PATCH v3 00/15] Add Flexgen Clock support
Date: Mon, 28 Jul 2014 22:44:36 -0700 [thread overview]
Message-ID: <20140729054436.4906.44690@quantum> (raw)
In-Reply-To: <1405437631-23623-1-git-send-email-gabriel.fernandez@linaro.org>
Quoting Gabriel FERNANDEZ (2014-07-15 08:20:16)
> Changes in v3:
> - Change commit message
> - Remove uncessary (void *) cast
> - add a block diagram for flexgen clock binding documentation
>
> Changes in v2:
> - use static const for clkgen_pll_data and stm_fs tables (from
> Peter Griffin review)
> - add 326 and 333 Mhz frequencies
> - cosmetic correction in st,clkgen-vcc.txt
> - use of kcalloc instead of kzalloc in drivers/clk/st/clk-flexgen.c
>
> The goal of this series is to add Flexgen clock support to ST SoCs.
>
> A Flexgen clock is composed by:
> - a clock cross bar (represented by a mux element)
> - a pre and final dividers (represented by a divider and gate elements)
Applied to clk-next! I performed 's/drivers: //' on the $SUBJECT for
most of the patches.
Regards,
Mike
>
> Tested on B2120 board.
>
> Gabriel Fernandez (15):
> clk: st: Update ST clock binding documentation
> drivers: clk: st: use static const for stm_fs tables
> drivers: clk: st: use static const for clkgen_pll_data tables
> drivers: clk: st: Remove uncessary (void *) cast
> clk: st: Adds Flexgen clock binding
> drivers: clk: st: STiH407: Support for Flexgen Clocks
> drivers: clk: st: STiH407: Support for A9 MUX Clocks
> drivers: clk: st: STiH407: Support for clockgenA0
> drivers: clk: st: Add polarity bit indication
> drivers: clk: st: Add quadfs reset handling
> drivers: clk: st: STiH407: Support for clockgenC0
> drivers: clk: st: STiH407: Support for clockgenD0/D2/D3
> drivers: clk: st: STiH407: Support for clockgenA9
> drivers: clk: st: Update frequency tables for fs660c32 and fs432c65
> drivers: clk: st: Use round to closest divider flag
>
> .../bindings/clock/st/st,clkgen-divmux.txt | 28 +-
> .../devicetree/bindings/clock/st/st,clkgen-mux.txt | 6 +-
> .../devicetree/bindings/clock/st/st,clkgen-pll.txt | 17 +-
> .../bindings/clock/st/st,clkgen-prediv.txt | 8 +-
> .../devicetree/bindings/clock/st/st,clkgen-vcc.txt | 34 ++-
> .../devicetree/bindings/clock/st/st,clkgen.txt | 59 ++--
> .../devicetree/bindings/clock/st/st,flexgen.txt | 119 ++++++++
> .../devicetree/bindings/clock/st/st,quadfs.txt | 15 +-
> drivers/clk/st/Makefile | 2 +-
> drivers/clk/st/clk-flexgen.c | 331 +++++++++++++++++++++
> drivers/clk/st/clkgen-fsyn.c | 223 +++++++++++---
> drivers/clk/st/clkgen-mux.c | 12 +-
> drivers/clk/st/clkgen-pll.c | 94 +++++-
> 13 files changed, 828 insertions(+), 120 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/st/st,flexgen.txt
> create mode 100644 drivers/clk/st/clk-flexgen.c
>
> --
> 1.9.1
>
next prev parent reply other threads:[~2014-07-29 5:44 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-15 15:20 [PATCH v3 00/15] Add Flexgen Clock support Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` [PATCH v3 01/15] clk: st: Update ST clock binding documentation Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` [PATCH v3 02/15] drivers: clk: st: use static const for stm_fs tables Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` [PATCH v3 03/15] drivers: clk: st: use static const for clkgen_pll_data tables Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` [PATCH v3 04/15] drivers: clk: st: Remove uncessary (void *) cast Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` [PATCH v3 05/15] clk: st: Adds Flexgen clock binding Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` [PATCH v3 06/15] drivers: clk: st: STiH407: Support for Flexgen Clocks Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-29 5:31 ` Mike Turquette
2014-07-29 5:31 ` Mike Turquette
2014-08-03 10:58 ` Gabriel Fernandez
2014-07-15 15:20 ` [PATCH v3 07/15] drivers: clk: st: STiH407: Support for A9 MUX Clocks Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` [PATCH v3 08/15] drivers: clk: st: STiH407: Support for clockgenA0 Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` [PATCH v3 09/15] drivers: clk: st: Add polarity bit indication Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` [PATCH v3 10/15] drivers: clk: st: Add quadfs reset handling Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` [PATCH v3 11/15] drivers: clk: st: STiH407: Support for clockgenC0 Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` [PATCH v3 12/15] drivers: clk: st: STiH407: Support for clockgenD0/D2/D3 Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` [PATCH v3 13/15] drivers: clk: st: STiH407: Support for clockgenA9 Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` [PATCH v3 14/15] drivers: clk: st: Update frequency tables for fs660c32 and fs432c65 Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-15 15:20 ` [PATCH v3 15/15] drivers: clk: st: Use round to closest divider flag Gabriel FERNANDEZ
2014-07-15 15:20 ` Gabriel FERNANDEZ
2014-07-29 5:44 ` Mike Turquette [this message]
2014-07-29 5:44 ` [PATCH v3 00/15] Add Flexgen Clock support Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140729054436.4906.44690@quantum \
--to=mturquette@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.