diff for duplicates of <20140729145312.GT29045@atomide.com> diff --git a/a/1.txt b/N1/1.txt index 404b170..771ea1a 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -20,7 +20,7 @@ Regards, Tony [ 0.000000] Booting Linux on physical CPU 0x0 -[ 0.000000] Linux version 3.16.0-rc7 (tmlind@muffinssi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #291 SMP Tue Jul 29 07:37:49 PDT 2014 +[ 0.000000] Linux version 3.16.0-rc7 (tmlind at muffinssi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #291 SMP Tue Jul 29 07:37:49 PDT 2014 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI OMAP37XX EVM (TMDSEVM3730) @@ -106,9 +106,9 @@ Tony [ 0.463012] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.465698] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.468414] gpiochip_add: registered GPIOs 160 to 191 on device: gpio -[ 0.469879] irq: no irq domain found for /ocp/pinmux@48002030 ! -[ 0.470733] irq: no irq domain found for /ocp/pinmux@48002030 ! -[ 0.471557] irq: no irq domain found for /ocp/pinmux@48002030 ! +[ 0.469879] irq: no irq domain found for /ocp/pinmux at 48002030 ! +[ 0.470733] irq: no irq domain found for /ocp/pinmux at 48002030 ! +[ 0.471557] irq: no irq domain found for /ocp/pinmux at 48002030 ! [ 0.494659] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.496246] gpmc_probe_nand_child: ti,elm-id property not found [ 0.496459] gpmc_cs_program_settings: invalid width 0! @@ -123,7 +123,7 @@ Tony [ 0.608215] vddvario: no parameters [ 0.608886] of_get_named_gpiod_flags: can't parse gpios property of node '/regulator-vdd33a[0]' [ 0.609466] vdd33a: no parameters -[ 0.610137] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/pinmux@48002030/pinmux_wl12xx_gpio, deferring probe +[ 0.610137] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/pinmux at 48002030/pinmux_wl12xx_gpio, deferring probe [ 0.610229] platform wl12xx_vmmc: Driver reg-fixed-voltage requests probe deferral [ 0.610504] of_get_named_gpiod_flags exited with status 0 [ 0.611389] lcd_3v3: 3300 mV @@ -165,14 +165,14 @@ Tony [ 1.056640] pbias_mmc_omap2430: 1800 <--> 3000 mV at 3000 mV [ 1.059082] abb_mpu_iva: 1012 <--> 1375 mV [ 1.060546] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled -[ 1.070648] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' +[ 1.070648] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 4806a000[0]' [ 1.071319] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 -[ 1.075195] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' +[ 1.075195] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 4806c000[0]' [ 1.075653] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 -[ 1.079376] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@49020000[0]' +[ 1.079376] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 49020000[0]' [ 1.079833] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 1.081939] omap_uart 49042000.serial: no wakeirq for uart0 -[ 1.082031] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@49042000[0]' +[ 1.082031] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 49042000[0]' [ 1.082427] 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3 [ 1.120300] brd: module loaded [ 1.142852] loop: module loaded @@ -215,23 +215,23 @@ Tony [ 1.464294] usbcore: registered new interface driver usb-storage [ 1.464599] usbcore: registered new interface driver usbtest [ 1.468109] mousedev: PS/2 mouse device common for all mice -[ 1.469604] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad -[ 1.469665] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap -[ 1.469818] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2 +[ 1.469604] twl4030_keypad 48070000.i2c:twl at 48:keypad: OF: linux,keymap property not defined in /ocp/i2c at 48070000/twl at 48/keypad +[ 1.469665] twl4030_keypad 48070000.i2c:twl at 48:keypad: Failed to build keymap +[ 1.469818] twl4030_keypad: probe of 48070000.i2c:twl at 48:keypad failed with error -2 [ 1.471496] of_get_named_gpiod_flags exited with status 0 [ 1.548706] ads7846 spi1.0: touchscreen, irq 287 [ 1.551727] input: ADS7846 Touchscreen as /devices/68000000.ocp/48098000.spi/spi_master/spi1/spi1.0/input/input1 -[ 1.559204] input: twl4030_pwrbutton as /devices/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input2 -[ 1.562530] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. -[ 1.563171] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC -[ 1.570068] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 +[ 1.559204] input: twl4030_pwrbutton as /devices/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl at 48:pwrbutton/input/input2 +[ 1.562530] twl_rtc 48070000.i2c:twl at 48:rtc: Power up reset detected. +[ 1.563171] twl_rtc 48070000.i2c:twl at 48:rtc: Enabling TWL-RTC +[ 1.570068] twl_rtc 48070000.i2c:twl at 48:rtc: rtc core: registered 48070000.i2c:twl at 48 as rtc0 [ 1.571868] i2c /dev entries driver [ 1.575744] Driver for 1-wire Dallas network protocol. [ 1.580627] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec -[ 1.585296] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' -[ 1.585357] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' -[ 1.637634] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' -[ 1.637725] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' +[ 1.585296] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 4809c000[0]' +[ 1.585357] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 4809c000[0]' +[ 1.637634] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]' +[ 1.637725] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]' [ 1.638488] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 1.639190] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 1.640533] of_get_named_gpiod_flags exited with status 0 @@ -255,9 +255,9 @@ Tony [ 1.670257] of_get_named_gpiod_flags exited with status 0 [ 1.671325] vwl1271: 1800 mV [ 1.671600] vwl1271: supplied by VMMC2 -[ 1.673278] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' -[ 1.673339] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' -[ 1.802642] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) +[ 1.673278] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]' +[ 1.673339] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]' +[ 1.802642] twl_rtc 48070000.i2c:twl at 48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 1.802734] sr_init: No PMIC hook to init smartreflex [ 1.803344] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 1.804321] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized diff --git a/a/content_digest b/N1/content_digest index 46b6aa7..94d5f20 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -6,13 +6,10 @@ "ref\020140729084930.GH29045@atomide.com\0" "ref\0alpine.DEB.2.02.1407291225070.13035@utopia.booyaka.com\0" "ref\0alpine.DEB.2.02.1407291256270.13035@utopia.booyaka.com\0" - "From\0Tony Lindgren <tony@atomide.com>\0" - "Subject\0Re: OMAP baseline test results for v3.16-rc4\0" + "From\0tony@atomide.com (Tony Lindgren)\0" + "Subject\0OMAP baseline test results for v3.16-rc4\0" "Date\0Tue, 29 Jul 2014 07:53:13 -0700\0" - "To\0Paul Walmsley <paul@pwsan.com>\0" - "Cc\0linux-omap@vger.kernel.org" - linux-arm-kernel@lists.infradead.org - " kernel-build-reports@lists.linaro.org\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "* Paul Walmsley <paul@pwsan.com> [140729 06:00]:\n" @@ -37,7 +34,7 @@ "Tony\n" "\n" "[ 0.000000] Booting Linux on physical CPU 0x0\n" - "[ 0.000000] Linux version 3.16.0-rc7 (tmlind@muffinssi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #291 SMP Tue Jul 29 07:37:49 PDT 2014\n" + "[ 0.000000] Linux version 3.16.0-rc7 (tmlind at muffinssi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #291 SMP Tue Jul 29 07:37:49 PDT 2014\n" "[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d\n" "[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache\n" "[ 0.000000] Machine model: TI OMAP37XX EVM (TMDSEVM3730)\n" @@ -123,9 +120,9 @@ "[ 0.463012] gpiochip_add: registered GPIOs 96 to 127 on device: gpio\n" "[ 0.465698] gpiochip_add: registered GPIOs 128 to 159 on device: gpio\n" "[ 0.468414] gpiochip_add: registered GPIOs 160 to 191 on device: gpio\n" - "[ 0.469879] irq: no irq domain found for /ocp/pinmux@48002030 !\n" - "[ 0.470733] irq: no irq domain found for /ocp/pinmux@48002030 !\n" - "[ 0.471557] irq: no irq domain found for /ocp/pinmux@48002030 !\n" + "[ 0.469879] irq: no irq domain found for /ocp/pinmux at 48002030 !\n" + "[ 0.470733] irq: no irq domain found for /ocp/pinmux at 48002030 !\n" + "[ 0.471557] irq: no irq domain found for /ocp/pinmux at 48002030 !\n" "[ 0.494659] omap-gpmc 6e000000.gpmc: GPMC revision 5.0\n" "[ 0.496246] gpmc_probe_nand_child: ti,elm-id property not found\n" "[ 0.496459] gpmc_cs_program_settings: invalid width 0!\n" @@ -140,7 +137,7 @@ "[ 0.608215] vddvario: no parameters\n" "[ 0.608886] of_get_named_gpiod_flags: can't parse gpios property of node '/regulator-vdd33a[0]'\n" "[ 0.609466] vdd33a: no parameters\n" - "[ 0.610137] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/pinmux@48002030/pinmux_wl12xx_gpio, deferring probe\n" + "[ 0.610137] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/pinmux at 48002030/pinmux_wl12xx_gpio, deferring probe\n" "[ 0.610229] platform wl12xx_vmmc: Driver reg-fixed-voltage requests probe deferral\n" "[ 0.610504] of_get_named_gpiod_flags exited with status 0\n" "[ 0.611389] lcd_3v3: 3300 mV \n" @@ -182,14 +179,14 @@ "[ 1.056640] pbias_mmc_omap2430: 1800 <--> 3000 mV at 3000 mV \n" "[ 1.059082] abb_mpu_iva: 1012 <--> 1375 mV \n" "[ 1.060546] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled\n" - "[ 1.070648] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]'\n" + "[ 1.070648] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 4806a000[0]'\n" "[ 1.071319] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0\n" - "[ 1.075195] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]'\n" + "[ 1.075195] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 4806c000[0]'\n" "[ 1.075653] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1\n" - "[ 1.079376] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@49020000[0]'\n" + "[ 1.079376] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 49020000[0]'\n" "[ 1.079833] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2\n" "[ 1.081939] omap_uart 49042000.serial: no wakeirq for uart0\n" - "[ 1.082031] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@49042000[0]'\n" + "[ 1.082031] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 49042000[0]'\n" "[ 1.082427] 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3\n" "[ 1.120300] brd: module loaded\n" "[ 1.142852] loop: module loaded\n" @@ -232,23 +229,23 @@ "[ 1.464294] usbcore: registered new interface driver usb-storage\n" "[ 1.464599] usbcore: registered new interface driver usbtest\n" "[ 1.468109] mousedev: PS/2 mouse device common for all mice\n" - "[ 1.469604] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad\n" - "[ 1.469665] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap\n" - "[ 1.469818] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2\n" + "[ 1.469604] twl4030_keypad 48070000.i2c:twl at 48:keypad: OF: linux,keymap property not defined in /ocp/i2c at 48070000/twl at 48/keypad\n" + "[ 1.469665] twl4030_keypad 48070000.i2c:twl at 48:keypad: Failed to build keymap\n" + "[ 1.469818] twl4030_keypad: probe of 48070000.i2c:twl at 48:keypad failed with error -2\n" "[ 1.471496] of_get_named_gpiod_flags exited with status 0\n" "[ 1.548706] ads7846 spi1.0: touchscreen, irq 287\n" "[ 1.551727] input: ADS7846 Touchscreen as /devices/68000000.ocp/48098000.spi/spi_master/spi1/spi1.0/input/input1\n" - "[ 1.559204] input: twl4030_pwrbutton as /devices/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input2\n" - "[ 1.562530] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.\n" - "[ 1.563171] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC\n" - "[ 1.570068] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0\n" + "[ 1.559204] input: twl4030_pwrbutton as /devices/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl at 48:pwrbutton/input/input2\n" + "[ 1.562530] twl_rtc 48070000.i2c:twl at 48:rtc: Power up reset detected.\n" + "[ 1.563171] twl_rtc 48070000.i2c:twl at 48:rtc: Enabling TWL-RTC\n" + "[ 1.570068] twl_rtc 48070000.i2c:twl at 48:rtc: rtc core: registered 48070000.i2c:twl at 48 as rtc0\n" "[ 1.571868] i2c /dev entries driver\n" "[ 1.575744] Driver for 1-wire Dallas network protocol.\n" "[ 1.580627] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec\n" - "[ 1.585296] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]'\n" - "[ 1.585357] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]'\n" - "[ 1.637634] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]'\n" - "[ 1.637725] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]'\n" + "[ 1.585296] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 4809c000[0]'\n" + "[ 1.585357] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 4809c000[0]'\n" + "[ 1.637634] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]'\n" + "[ 1.637725] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]'\n" "[ 1.638488] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517\n" "[ 1.639190] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral\n" "[ 1.640533] of_get_named_gpiod_flags exited with status 0\n" @@ -272,9 +269,9 @@ "[ 1.670257] of_get_named_gpiod_flags exited with status 0\n" "[ 1.671325] vwl1271: 1800 mV \n" "[ 1.671600] vwl1271: supplied by VMMC2\n" - "[ 1.673278] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]'\n" - "[ 1.673339] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]'\n" - "[ 1.802642] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)\n" + "[ 1.673278] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]'\n" + "[ 1.673339] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]'\n" + "[ 1.802642] twl_rtc 48070000.i2c:twl at 48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)\n" "[ 1.802734] sr_init: No PMIC hook to init smartreflex\n" "[ 1.803344] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized\n" "[ 1.804321] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized\n" @@ -293,4 +290,4 @@ "[ 4.535583] Freeing unused kernel memory: 400K (c07b6000 - c081a000)\n" [ 6.771423] random: sshd urandom read with 46 bits of entropy available -d1b890e01f187089a1ac4cccb6be2a24c2f1fbaa2b5eb316578398d299db0617 +3955b109543d7223f1377315072c243b9d39d0ff2ff3bf0ace3dd7f9a0f45840
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.