From: Tony Lindgren <tony@atomide.com>
To: Paul Walmsley <paul@pwsan.com>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
kernel-build-reports@lists.linaro.org
Subject: Re: OMAP baseline test results for v3.16-rc4
Date: Tue, 29 Jul 2014 07:53:13 -0700 [thread overview]
Message-ID: <20140729145312.GT29045@atomide.com> (raw)
In-Reply-To: <alpine.DEB.2.02.1407291256270.13035@utopia.booyaka.com>
* Paul Walmsley <paul@pwsan.com> [140729 06:00]:
> On Tue, 29 Jul 2014, Paul Walmsley wrote:
>
> > I will add code to read back the values from the sysfs files, just to make
> > sure they are being set.
>
> Confirmed that they are.
Hmm maybe different u-boot version then? I'm using
2014.04-00001-g5f09f5b.
> Are you using NFS root on 37xxevm or MMC root?
Using nfsroot and omap2plus_defconfig. My dmesg attached
in case it provides some clues. I don't have console=ttyO
here, but I've verified that it works with that too.
Regards,
Tony
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.16.0-rc7 (tmlind@muffinssi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #291 SMP Tue Jul 29 07:37:49 PDT 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: TI OMAP37XX EVM (TMDSEVM3730)
[ 0.000000] cma: CMA: reserved 16 MiB at 8e800000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] free_area_init_node: node 0, pgdat c08c0c00, node_mem_map cfcf1000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65280 pages, LIFO batch:15
[ 0.000000] HighMem zone: 1048574 pages exceeds freesize 0
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[ 0.000000] PERCPU: Embedded 9 pages/cpu @cfc7d000 s14336 r8192 d14336 u36864
[ 0.000000] pcpu-alloc: s14336 r8192 d14336 u36864 alloc=9*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: root=/dev/nfs ip=dhcp debug earlyprintk omapfb.vram=0:2M,1:5M omapfb.rotate=0 init=/root/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 224728K/261120K available (5659K kernel code, 681K rwdata, 2200K rodata, 402K init, 8209K bss, 36392K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc07b51dc (7861 kB)
[ 0.000000] .init : 0xc07b6000 - 0xc081a800 ( 402 kB)
[ 0.000000] .data : 0xc081c000 - 0xc08c6570 ( 682 kB)
[ 0.000000] .bss : 0xc08c6570 - 0xc10caa60 (8210 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.001159] Console: colour dummy device 80x30
[ 0.004669] console [tty0] enabled
[ 0.004699] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.004760] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.004791] ... MAX_LOCK_DEPTH: 48
[ 0.004791] ... MAX_LOCKDEP_KEYS: 8191
[ 0.004821] ... CLASSHASH_SIZE: 4096
[ 0.004852] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.004882] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.004913] ... CHAINHASH_SIZE: 32768
[ 0.004943] memory used by lock dependency info: 5167 kB
[ 0.004974] per task-struct memory footprint: 1152 bytes
[ 0.005065] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696)
[ 0.097656] pid_max: default: 32768 minimum: 301
[ 0.098236] Security Framework initialized
[ 0.098449] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.098510] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.101837] CPU: Testing write buffer coherency: ok
[ 0.103424] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.103576] Setting up static identity map for 0x8055d2c0 - 0x8055d330
[ 0.108398] Brought up 1 CPUs
[ 0.108459] SMP: Total of 1 processors activated.
[ 0.108489] CPU: All CPU(s) started in SVC mode.
[ 0.112365] devtmpfs: initialized
[ 0.123168] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.205596] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[ 0.208068] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[ 0.302490] omap_hwmod: mcbsp2: cannot be enabled for reset (3)
[ 0.320434] pinctrl core: initialized pinctrl subsystem
[ 0.324096] regulator-dummy: no parameters
[ 0.420104] NET: Registered protocol family 16
[ 0.429107] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.432617] cpuidle: using governor ladder
[ 0.432678] cpuidle: using governor menu
[ 0.441406] Reprogramming SDRC clock to 400000000 Hz
[ 0.454162] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.455535] OMAP GPIO hardware version 2.5
[ 0.457519] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.460296] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.463012] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.465698] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[ 0.468414] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
[ 0.469879] irq: no irq domain found for /ocp/pinmux@48002030 !
[ 0.470733] irq: no irq domain found for /ocp/pinmux@48002030 !
[ 0.471557] irq: no irq domain found for /ocp/pinmux@48002030 !
[ 0.494659] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[ 0.496246] gpmc_probe_nand_child: ti,elm-id property not found
[ 0.496459] gpmc_cs_program_settings: invalid width 0!
[ 0.498962] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi'
[ 0.507354] No ATAGs?
[ 0.507415] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.511108] OMAP DMA hardware revision 5.0
[ 0.551330] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[ 0.551483] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
[ 0.605987] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[ 0.607360] of_get_named_gpiod_flags: can't parse gpios property of node '/regulator-vddvario[0]'
[ 0.608215] vddvario: no parameters
[ 0.608886] of_get_named_gpiod_flags: can't parse gpios property of node '/regulator-vdd33a[0]'
[ 0.609466] vdd33a: no parameters
[ 0.610137] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/pinmux@48002030/pinmux_wl12xx_gpio, deferring probe
[ 0.610229] platform wl12xx_vmmc: Driver reg-fixed-voltage requests probe deferral
[ 0.610504] of_get_named_gpiod_flags exited with status 0
[ 0.611389] lcd_3v3: 3300 mV
[ 0.617828] SCSI subsystem initialized
[ 0.619049] usbcore: registered new interface driver usbfs
[ 0.619354] usbcore: registered new interface driver hub
[ 0.619964] usbcore: registered new device driver usb
[ 0.773498] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz
[ 0.775390] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz
[ 0.780242] omap_i2c 48060000.i2c: bus 2 rev4.4 at 400 kHz
[ 0.787780] Switched to clocksource 32k_counter
[ 1.009338] NET: Registered protocol family 2
[ 1.011840] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 1.012115] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
[ 1.013275] TCP: Hash tables configured (established 2048 bind 2048)
[ 1.013488] TCP: reno registered
[ 1.013549] UDP hash table entries: 256 (order: 2, 20480 bytes)
[ 1.013885] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[ 1.015533] NET: Registered protocol family 1
[ 1.018127] RPC: Registered named UNIX socket transport module.
[ 1.018188] RPC: Registered udp transport module.
[ 1.018218] RPC: Registered tcp transport module.
[ 1.018249] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.020080] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 1.028137] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.034179] VFS: Disk quotas dquot_6.5.2
[ 1.034423] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.038482] NFS: Registering the id_resolver key type
[ 1.039031] Key type id_resolver registered
[ 1.039062] Key type id_legacy registered
[ 1.039276] jffs2: version 2.2. (NAND) (SUMMARY) \xffffffc2\xffffffa9\xffffffa9 2001-2006 Red Hat, Inc.
[ 1.039947] msgmni has been set to 470
[ 1.046936] io scheduler noop registered
[ 1.047119] io scheduler deadline registered
[ 1.047271] io scheduler cfq registered (default)
[ 1.051239] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[ 1.052062] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[ 1.053161] pinctrl-single 480025a0.pinmux: 46 pins at pa fa0025a0 size 92
[ 1.056640] pbias_mmc_omap2430: 1800 <--> 3000 mV at 3000 mV
[ 1.059082] abb_mpu_iva: 1012 <--> 1375 mV
[ 1.060546] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.070648] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]'
[ 1.071319] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[ 1.075195] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]'
[ 1.075653] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[ 1.079376] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@49020000[0]'
[ 1.079833] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[ 1.081939] omap_uart 49042000.serial: no wakeirq for uart0
[ 1.082031] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@49042000[0]'
[ 1.082427] 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3
[ 1.120300] brd: module loaded
[ 1.142852] loop: module loaded
[ 1.163208] twl 0-0048: PIH (irq 23) chaining IRQs 341..349
[ 1.163818] twl 0-0048: power (irq 346) chaining IRQs 349..356
[ 1.171874] VAUX1: at 3000 mV
[ 1.176086] VAUX2_4030: at 1800 mV
[ 1.180084] VAUX3: at 2800 mV
[ 1.184020] VAUX4: at 2800 mV
[ 1.188049] VDD1: 600 <--> 1450 mV at 1200 mV
[ 1.191833] VDAC: 1800 mV
[ 1.198486] VIO: at 1800 mV
[ 1.203399] VINTANA1: 1500 mV
[ 1.208038] VINTANA2: at 2750 mV
[ 1.211364] VINTDIG: 1500 mV
[ 1.214691] VMMC1: 1850 <--> 3150 mV at 3000 mV
[ 1.218872] VMMC2: 1850 <--> 3150 mV at 2600 mV
[ 1.222015] VUSB1V5: 1500 mV
[ 1.224121] VUSB1V8: 1800 mV
[ 1.226165] VUSB3V1: 3100 mV
[ 1.234100] VPLL1: at 1800 mV
[ 1.240905] VPLL2: 1800 mV
[ 1.244842] VSIM: 1800 <--> 3000 mV at 1800 mV
[ 1.248443] twl4030_gpio twl4030-gpio: gpio (irq 341) chaining IRQs 357..374
[ 1.249481] gpiochip_find_base: found new base at 492
[ 1.250457] gpiochip_add: registered GPIOs 492 to 511 on device: twl4030
[ 1.351745] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.383422] libphy: smsc911x-mdio: probed
[ 1.457794] smsc911x 2c000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2c000000.etherne:01, irq=-1)
[ 1.458160] smsc911x 2c000000.ethernet eth0: MAC Address: 00:12:34:56:78:90
[ 1.460418] usbcore: registered new interface driver asix
[ 1.460693] usbcore: registered new interface driver ax88179_178a
[ 1.460906] usbcore: registered new interface driver cdc_ether
[ 1.461212] usbcore: registered new interface driver smsc95xx
[ 1.461425] usbcore: registered new interface driver net1080
[ 1.461639] usbcore: registered new interface driver cdc_subset
[ 1.461883] usbcore: registered new interface driver zaurus
[ 1.462219] usbcore: registered new interface driver cdc_ncm
[ 1.463928] usbcore: registered new interface driver cdc_wdm
[ 1.464294] usbcore: registered new interface driver usb-storage
[ 1.464599] usbcore: registered new interface driver usbtest
[ 1.468109] mousedev: PS/2 mouse device common for all mice
[ 1.469604] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
[ 1.469665] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
[ 1.469818] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2
[ 1.471496] of_get_named_gpiod_flags exited with status 0
[ 1.548706] ads7846 spi1.0: touchscreen, irq 287
[ 1.551727] input: ADS7846 Touchscreen as /devices/68000000.ocp/48098000.spi/spi_master/spi1/spi1.0/input/input1
[ 1.559204] input: twl4030_pwrbutton as /devices/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input2
[ 1.562530] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
[ 1.563171] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[ 1.570068] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
[ 1.571868] i2c /dev entries driver
[ 1.575744] Driver for 1-wire Dallas network protocol.
[ 1.580627] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 1.585296] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]'
[ 1.585357] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]'
[ 1.637634] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]'
[ 1.637725] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]'
[ 1.638488] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517
[ 1.639190] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral
[ 1.640533] of_get_named_gpiod_flags exited with status 0
[ 1.640624] of_get_named_gpiod_flags exited with status 0
[ 1.648895] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.650207] usbcore: registered new interface driver usbhid
[ 1.650268] usbhid: USB HID core driver
[ 1.652954] oprofile: using arm/armv7
[ 1.653808] TCP: cubic registered
[ 1.653869] Initializing XFRM netlink socket
[ 1.654052] NET: Registered protocol family 17
[ 1.654174] NET: Registered protocol family 15
[ 1.654693] Key type dns_resolver registered
[ 1.655090] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[ 1.655151] omap2_set_init_voltage: unable to set vdd_mpu_iva
[ 1.655212] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[ 1.655242] omap2_set_init_voltage: unable to set vdd_core
[ 1.660217] ThumbEE CPU extension supported.
[ 1.660339] Registering SWP/SWPB emulation handler
[ 1.660369] SmartReflex Class3 initialized
[ 1.670257] of_get_named_gpiod_flags exited with status 0
[ 1.671325] vwl1271: 1800 mV
[ 1.671600] vwl1271: supplied by VMMC2
[ 1.673278] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]'
[ 1.673339] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]'
[ 1.802642] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 1.802734] sr_init: No PMIC hook to init smartreflex
[ 1.803344] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[ 1.804321] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[ 1.981872] smsc911x 2c000000.ethernet eth0: SMSC911x/921x identified at 0xd087c000, IRQ: 288
[ 4.477233] Sending DHCP requests ., OK
[ 4.497253] IP-Config: Got DHCP answer from 192.168.111.1, my address is 192.168.111.253
[ 4.497711] IP-Config: Complete:
[ 4.497772] device=eth0, hwaddr=00:50:c2:7e:99:47, ipaddr=192.168.111.253, mask=255.255.255.0, gw=192.168.111.1
[ 4.497833] host=omap3evm, domain=muru.com, nis-domain=(none)
[ 4.497863] bootserver=192.168.111.8, rootserver=192.168.111.8, rootpath=/srv/nfs3/armhf,v3
[ 4.497894] nameserver0=192.168.1.254
[ 4.498321] vwl1271: disabling
[ 4.499664] VUSB3V1: disabling
[ 4.532409] VFS: Mounted root (nfs filesystem) readonly on device 0:13.
[ 4.534545] devtmpfs: mounted
[ 4.535583] Freeing unused kernel memory: 400K (c07b6000 - c081a000)
[ 6.771423] random: sshd urandom read with 46 bits of entropy available
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: OMAP baseline test results for v3.16-rc4
Date: Tue, 29 Jul 2014 07:53:13 -0700 [thread overview]
Message-ID: <20140729145312.GT29045@atomide.com> (raw)
In-Reply-To: <alpine.DEB.2.02.1407291256270.13035@utopia.booyaka.com>
* Paul Walmsley <paul@pwsan.com> [140729 06:00]:
> On Tue, 29 Jul 2014, Paul Walmsley wrote:
>
> > I will add code to read back the values from the sysfs files, just to make
> > sure they are being set.
>
> Confirmed that they are.
Hmm maybe different u-boot version then? I'm using
2014.04-00001-g5f09f5b.
> Are you using NFS root on 37xxevm or MMC root?
Using nfsroot and omap2plus_defconfig. My dmesg attached
in case it provides some clues. I don't have console=ttyO
here, but I've verified that it works with that too.
Regards,
Tony
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.16.0-rc7 (tmlind at muffinssi) (gcc version 4.7.2 (Debian 4.7.2-5) ) #291 SMP Tue Jul 29 07:37:49 PDT 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: TI OMAP37XX EVM (TMDSEVM3730)
[ 0.000000] cma: CMA: reserved 16 MiB at 8e800000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] free_area_init_node: node 0, pgdat c08c0c00, node_mem_map cfcf1000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65280 pages, LIFO batch:15
[ 0.000000] HighMem zone: 1048574 pages exceeds freesize 0
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[ 0.000000] PERCPU: Embedded 9 pages/cpu @cfc7d000 s14336 r8192 d14336 u36864
[ 0.000000] pcpu-alloc: s14336 r8192 d14336 u36864 alloc=9*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: root=/dev/nfs ip=dhcp debug earlyprintk omapfb.vram=0:2M,1:5M omapfb.rotate=0 init=/root/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 224728K/261120K available (5659K kernel code, 681K rwdata, 2200K rodata, 402K init, 8209K bss, 36392K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc07b51dc (7861 kB)
[ 0.000000] .init : 0xc07b6000 - 0xc081a800 ( 402 kB)
[ 0.000000] .data : 0xc081c000 - 0xc08c6570 ( 682 kB)
[ 0.000000] .bss : 0xc08c6570 - 0xc10caa60 (8210 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.001159] Console: colour dummy device 80x30
[ 0.004669] console [tty0] enabled
[ 0.004699] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.004760] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.004791] ... MAX_LOCK_DEPTH: 48
[ 0.004791] ... MAX_LOCKDEP_KEYS: 8191
[ 0.004821] ... CLASSHASH_SIZE: 4096
[ 0.004852] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.004882] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.004913] ... CHAINHASH_SIZE: 32768
[ 0.004943] memory used by lock dependency info: 5167 kB
[ 0.004974] per task-struct memory footprint: 1152 bytes
[ 0.005065] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696)
[ 0.097656] pid_max: default: 32768 minimum: 301
[ 0.098236] Security Framework initialized
[ 0.098449] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.098510] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.101837] CPU: Testing write buffer coherency: ok
[ 0.103424] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.103576] Setting up static identity map for 0x8055d2c0 - 0x8055d330
[ 0.108398] Brought up 1 CPUs
[ 0.108459] SMP: Total of 1 processors activated.
[ 0.108489] CPU: All CPU(s) started in SVC mode.
[ 0.112365] devtmpfs: initialized
[ 0.123168] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.205596] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[ 0.208068] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[ 0.302490] omap_hwmod: mcbsp2: cannot be enabled for reset (3)
[ 0.320434] pinctrl core: initialized pinctrl subsystem
[ 0.324096] regulator-dummy: no parameters
[ 0.420104] NET: Registered protocol family 16
[ 0.429107] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.432617] cpuidle: using governor ladder
[ 0.432678] cpuidle: using governor menu
[ 0.441406] Reprogramming SDRC clock to 400000000 Hz
[ 0.454162] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.455535] OMAP GPIO hardware version 2.5
[ 0.457519] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.460296] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.463012] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.465698] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[ 0.468414] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
[ 0.469879] irq: no irq domain found for /ocp/pinmux at 48002030 !
[ 0.470733] irq: no irq domain found for /ocp/pinmux at 48002030 !
[ 0.471557] irq: no irq domain found for /ocp/pinmux at 48002030 !
[ 0.494659] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[ 0.496246] gpmc_probe_nand_child: ti,elm-id property not found
[ 0.496459] gpmc_cs_program_settings: invalid width 0!
[ 0.498962] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi'
[ 0.507354] No ATAGs?
[ 0.507415] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.511108] OMAP DMA hardware revision 5.0
[ 0.551330] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[ 0.551483] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
[ 0.605987] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[ 0.607360] of_get_named_gpiod_flags: can't parse gpios property of node '/regulator-vddvario[0]'
[ 0.608215] vddvario: no parameters
[ 0.608886] of_get_named_gpiod_flags: can't parse gpios property of node '/regulator-vdd33a[0]'
[ 0.609466] vdd33a: no parameters
[ 0.610137] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/pinmux at 48002030/pinmux_wl12xx_gpio, deferring probe
[ 0.610229] platform wl12xx_vmmc: Driver reg-fixed-voltage requests probe deferral
[ 0.610504] of_get_named_gpiod_flags exited with status 0
[ 0.611389] lcd_3v3: 3300 mV
[ 0.617828] SCSI subsystem initialized
[ 0.619049] usbcore: registered new interface driver usbfs
[ 0.619354] usbcore: registered new interface driver hub
[ 0.619964] usbcore: registered new device driver usb
[ 0.773498] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz
[ 0.775390] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz
[ 0.780242] omap_i2c 48060000.i2c: bus 2 rev4.4 at 400 kHz
[ 0.787780] Switched to clocksource 32k_counter
[ 1.009338] NET: Registered protocol family 2
[ 1.011840] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 1.012115] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
[ 1.013275] TCP: Hash tables configured (established 2048 bind 2048)
[ 1.013488] TCP: reno registered
[ 1.013549] UDP hash table entries: 256 (order: 2, 20480 bytes)
[ 1.013885] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[ 1.015533] NET: Registered protocol family 1
[ 1.018127] RPC: Registered named UNIX socket transport module.
[ 1.018188] RPC: Registered udp transport module.
[ 1.018218] RPC: Registered tcp transport module.
[ 1.018249] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.020080] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 1.028137] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.034179] VFS: Disk quotas dquot_6.5.2
[ 1.034423] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.038482] NFS: Registering the id_resolver key type
[ 1.039031] Key type id_resolver registered
[ 1.039062] Key type id_legacy registered
[ 1.039276] jffs2: version 2.2. (NAND) (SUMMARY) \xffffffc2\xffffffa9\xffffffa9 2001-2006 Red Hat, Inc.
[ 1.039947] msgmni has been set to 470
[ 1.046936] io scheduler noop registered
[ 1.047119] io scheduler deadline registered
[ 1.047271] io scheduler cfq registered (default)
[ 1.051239] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[ 1.052062] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[ 1.053161] pinctrl-single 480025a0.pinmux: 46 pins at pa fa0025a0 size 92
[ 1.056640] pbias_mmc_omap2430: 1800 <--> 3000 mV at 3000 mV
[ 1.059082] abb_mpu_iva: 1012 <--> 1375 mV
[ 1.060546] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.070648] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 4806a000[0]'
[ 1.071319] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[ 1.075195] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 4806c000[0]'
[ 1.075653] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[ 1.079376] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 49020000[0]'
[ 1.079833] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[ 1.081939] omap_uart 49042000.serial: no wakeirq for uart0
[ 1.082031] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 49042000[0]'
[ 1.082427] 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3
[ 1.120300] brd: module loaded
[ 1.142852] loop: module loaded
[ 1.163208] twl 0-0048: PIH (irq 23) chaining IRQs 341..349
[ 1.163818] twl 0-0048: power (irq 346) chaining IRQs 349..356
[ 1.171874] VAUX1: at 3000 mV
[ 1.176086] VAUX2_4030: at 1800 mV
[ 1.180084] VAUX3: at 2800 mV
[ 1.184020] VAUX4: at 2800 mV
[ 1.188049] VDD1: 600 <--> 1450 mV at 1200 mV
[ 1.191833] VDAC: 1800 mV
[ 1.198486] VIO: at 1800 mV
[ 1.203399] VINTANA1: 1500 mV
[ 1.208038] VINTANA2: at 2750 mV
[ 1.211364] VINTDIG: 1500 mV
[ 1.214691] VMMC1: 1850 <--> 3150 mV at 3000 mV
[ 1.218872] VMMC2: 1850 <--> 3150 mV at 2600 mV
[ 1.222015] VUSB1V5: 1500 mV
[ 1.224121] VUSB1V8: 1800 mV
[ 1.226165] VUSB3V1: 3100 mV
[ 1.234100] VPLL1: at 1800 mV
[ 1.240905] VPLL2: 1800 mV
[ 1.244842] VSIM: 1800 <--> 3000 mV at 1800 mV
[ 1.248443] twl4030_gpio twl4030-gpio: gpio (irq 341) chaining IRQs 357..374
[ 1.249481] gpiochip_find_base: found new base at 492
[ 1.250457] gpiochip_add: registered GPIOs 492 to 511 on device: twl4030
[ 1.351745] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.383422] libphy: smsc911x-mdio: probed
[ 1.457794] smsc911x 2c000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2c000000.etherne:01, irq=-1)
[ 1.458160] smsc911x 2c000000.ethernet eth0: MAC Address: 00:12:34:56:78:90
[ 1.460418] usbcore: registered new interface driver asix
[ 1.460693] usbcore: registered new interface driver ax88179_178a
[ 1.460906] usbcore: registered new interface driver cdc_ether
[ 1.461212] usbcore: registered new interface driver smsc95xx
[ 1.461425] usbcore: registered new interface driver net1080
[ 1.461639] usbcore: registered new interface driver cdc_subset
[ 1.461883] usbcore: registered new interface driver zaurus
[ 1.462219] usbcore: registered new interface driver cdc_ncm
[ 1.463928] usbcore: registered new interface driver cdc_wdm
[ 1.464294] usbcore: registered new interface driver usb-storage
[ 1.464599] usbcore: registered new interface driver usbtest
[ 1.468109] mousedev: PS/2 mouse device common for all mice
[ 1.469604] twl4030_keypad 48070000.i2c:twl at 48:keypad: OF: linux,keymap property not defined in /ocp/i2c at 48070000/twl at 48/keypad
[ 1.469665] twl4030_keypad 48070000.i2c:twl at 48:keypad: Failed to build keymap
[ 1.469818] twl4030_keypad: probe of 48070000.i2c:twl at 48:keypad failed with error -2
[ 1.471496] of_get_named_gpiod_flags exited with status 0
[ 1.548706] ads7846 spi1.0: touchscreen, irq 287
[ 1.551727] input: ADS7846 Touchscreen as /devices/68000000.ocp/48098000.spi/spi_master/spi1/spi1.0/input/input1
[ 1.559204] input: twl4030_pwrbutton as /devices/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl at 48:pwrbutton/input/input2
[ 1.562530] twl_rtc 48070000.i2c:twl at 48:rtc: Power up reset detected.
[ 1.563171] twl_rtc 48070000.i2c:twl at 48:rtc: Enabling TWL-RTC
[ 1.570068] twl_rtc 48070000.i2c:twl at 48:rtc: rtc core: registered 48070000.i2c:twl at 48 as rtc0
[ 1.571868] i2c /dev entries driver
[ 1.575744] Driver for 1-wire Dallas network protocol.
[ 1.580627] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 1.585296] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 4809c000[0]'
[ 1.585357] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 4809c000[0]'
[ 1.637634] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]'
[ 1.637725] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]'
[ 1.638488] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517
[ 1.639190] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral
[ 1.640533] of_get_named_gpiod_flags exited with status 0
[ 1.640624] of_get_named_gpiod_flags exited with status 0
[ 1.648895] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.650207] usbcore: registered new interface driver usbhid
[ 1.650268] usbhid: USB HID core driver
[ 1.652954] oprofile: using arm/armv7
[ 1.653808] TCP: cubic registered
[ 1.653869] Initializing XFRM netlink socket
[ 1.654052] NET: Registered protocol family 17
[ 1.654174] NET: Registered protocol family 15
[ 1.654693] Key type dns_resolver registered
[ 1.655090] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[ 1.655151] omap2_set_init_voltage: unable to set vdd_mpu_iva
[ 1.655212] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[ 1.655242] omap2_set_init_voltage: unable to set vdd_core
[ 1.660217] ThumbEE CPU extension supported.
[ 1.660339] Registering SWP/SWPB emulation handler
[ 1.660369] SmartReflex Class3 initialized
[ 1.670257] of_get_named_gpiod_flags exited with status 0
[ 1.671325] vwl1271: 1800 mV
[ 1.671600] vwl1271: supplied by VMMC2
[ 1.673278] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]'
[ 1.673339] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]'
[ 1.802642] twl_rtc 48070000.i2c:twl at 48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 1.802734] sr_init: No PMIC hook to init smartreflex
[ 1.803344] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[ 1.804321] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[ 1.981872] smsc911x 2c000000.ethernet eth0: SMSC911x/921x identified at 0xd087c000, IRQ: 288
[ 4.477233] Sending DHCP requests ., OK
[ 4.497253] IP-Config: Got DHCP answer from 192.168.111.1, my address is 192.168.111.253
[ 4.497711] IP-Config: Complete:
[ 4.497772] device=eth0, hwaddr=00:50:c2:7e:99:47, ipaddr=192.168.111.253, mask=255.255.255.0, gw=192.168.111.1
[ 4.497833] host=omap3evm, domain=muru.com, nis-domain=(none)
[ 4.497863] bootserver=192.168.111.8, rootserver=192.168.111.8, rootpath=/srv/nfs3/armhf,v3
[ 4.497894] nameserver0=192.168.1.254
[ 4.498321] vwl1271: disabling
[ 4.499664] VUSB3V1: disabling
[ 4.532409] VFS: Mounted root (nfs filesystem) readonly on device 0:13.
[ 4.534545] devtmpfs: mounted
[ 4.535583] Freeing unused kernel memory: 400K (c07b6000 - c081a000)
[ 6.771423] random: sshd urandom read with 46 bits of entropy available
next prev parent reply other threads:[~2014-07-29 14:54 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-06 23:41 OMAP baseline test results for v3.16-rc4 Paul Walmsley
2014-07-06 23:41 ` Paul Walmsley
2014-07-07 8:02 ` Tony Lindgren
2014-07-07 8:02 ` Tony Lindgren
2014-07-14 17:28 ` Paul Walmsley
2014-07-14 17:28 ` Paul Walmsley
2014-07-15 6:04 ` Tony Lindgren
2014-07-15 6:04 ` Tony Lindgren
2014-07-15 19:56 ` Paul Walmsley
2014-07-15 19:56 ` Paul Walmsley
2014-07-25 19:14 ` Paul Walmsley
2014-07-25 19:14 ` Paul Walmsley
2014-07-29 6:42 ` Tony Lindgren
2014-07-29 6:42 ` Tony Lindgren
2014-07-29 8:25 ` Paul Walmsley
2014-07-29 8:25 ` Paul Walmsley
2014-07-29 8:49 ` Tony Lindgren
2014-07-29 8:49 ` Tony Lindgren
2014-07-29 12:32 ` Paul Walmsley
2014-07-29 12:32 ` Paul Walmsley
2014-07-29 12:57 ` Paul Walmsley
2014-07-29 12:57 ` Paul Walmsley
2014-07-29 14:53 ` Tony Lindgren [this message]
2014-07-29 14:53 ` Tony Lindgren
2014-07-29 19:37 ` Paul Walmsley
2014-07-29 19:37 ` Paul Walmsley
2014-07-30 5:39 ` Tony Lindgren
2014-07-30 5:39 ` Tony Lindgren
2014-07-30 7:53 ` Paul Walmsley
2014-07-30 7:53 ` Paul Walmsley
2014-07-31 13:11 ` Tony Lindgren
2014-07-31 13:11 ` Tony Lindgren
2014-07-31 19:27 ` Paul Walmsley
2014-07-31 19:27 ` Paul Walmsley
2014-08-01 7:10 ` Tony Lindgren
2014-08-01 7:10 ` Tony Lindgren
2014-08-01 7:52 ` Tony Lindgren
2014-08-01 7:52 ` Tony Lindgren
2014-08-07 22:21 ` Paul Walmsley
2014-08-07 22:21 ` Paul Walmsley
2014-08-08 2:14 ` Felipe Balbi
2014-08-08 2:14 ` Felipe Balbi
2014-08-08 6:11 ` Paul Walmsley
2014-08-08 6:11 ` Paul Walmsley
2014-08-08 14:34 ` Felipe Balbi
2014-08-08 14:34 ` Felipe Balbi
2014-08-08 23:39 ` Paul Walmsley
2014-08-08 23:39 ` Paul Walmsley
2014-08-09 2:49 ` Felipe Balbi
2014-08-09 2:49 ` Felipe Balbi
2014-08-08 2:29 ` Fabio Estevam
2014-08-08 2:29 ` Fabio Estevam
2014-08-08 6:14 ` Paul Walmsley
2014-08-08 6:14 ` Paul Walmsley
2014-08-09 12:41 ` Ezequiel Garcia
2014-08-09 12:41 ` Ezequiel Garcia
2014-07-31 13:12 ` Tero Kristo
2014-07-31 13:12 ` Tero Kristo
2014-07-29 8:50 ` Paul Walmsley
2014-07-29 8:50 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140729145312.GT29045@atomide.com \
--to=tony@atomide.com \
--cc=kernel-build-reports@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.